Radio Remote Release Canon Hähnel Captur

Display protector coated for Canon R10 With this LCD protector you get a screen protector that meets the highest demands and scores with the latest technology. Since it is made of 0.3 mm thick glass, it can - unlike conventional films - not throw bubbles. Thus, the brilliance of your display is preserved and it is optimally protected. You can remove the screen protector without leaving any residue, because it can be applied with the principle of auto-absorption. The functionality of any existing touchscreen is also retained. Once you have mounted the screen protector, it is no longer necessary to fold the monitor. So you no longer have to worry about scratching the display if you forget to fold it in. The advantages at a glance: Perfect protection without bubblesSelf-adhesive & removable without leaving any residueREAL GLASS - clear view and color fastnessOnly 0.3 mm thickHardened tempered glass6-layer principle Impact resistantDust repellentAge-resistant For technicians: Japanese optical glassHardness of the glass: 8HLight transmission: > 90Absorption capacity: 130g/ cm² Resistance of the glass: 12 kg/ cm² Compatibility Canon R10 Scope of delivery 1x screen protector for Canon R10 The pictures are only sample pictures, delivered item may differ from the picture. [youtube;xgdX7iKheVQ;560;315]

Additional Reciver Canon Hähnel CapturProduct description:In conjunction with the set, the additional receiver enables the wireless triggering of further flash units. The number of flash units is not limited.compatibility:Hähnel Captur radio remote releaseScope of delivery:1x additional receiver Canon Hähnel Captur

IR Module Hähnel Captur ProThe Captur Pro module contains the same time control functions as the Timer module. Additionally, sensors for camera triggering are integrated into the Pro Module. For protection, the Pro Module is equipped with a silicone cover, also ideal for outdoor use. Two Mignon AA batteries/rechargeable batteries serve as energy source.Noise sensor: The sensitivity for the noise can be adjusted. Loud or quiet, depending on which the camera is triggered.Light sensor: The sensitivity for triggering, light or dark, can also be set here. This allows you to take great pictures, especially during fireworks or thunderstorms.R-sensor: In conjunction with the IR module, you get a light sensor that triggers the camera if there is an interruption.Laser sensor. When using a laser pointer, a light barrier can also be set up here. The trigger point can be adjusted much more precisely with the laser. Here too, the camera is triggered in the event of an interruption (laser pointer not included).Aux connection: The connection allows the use of own developed sensors. For all sensor releases, the release delay, duration of the release (0-5 sec.) and number of shots can be set. The IR module acts as an IR transmitter for the Pro module.All advantages at a glance:4 built-in sensors (light, sound, laser AUX, IR)AUX input for those who want to connect external sensors. (temperature sensor, pressure plate etc)Timer functions, delayed shooting, interval timer, long exposureShutter release with auto focus, single and continuous shooting, BULBWireless connection to the camera via 'Captur Kit' (sold separately)With the studio light cable you can trigger your studio lights by radioOperation with AA batteries (not included)DCM - Digital Channel Matching1/4" threaded connectioncompatibility:Alle Captur von Hähnel:FujifilmSonyNikonCanonOlympus & PanasonicScope of delivery1x IR module Hähnel Captur Pro

SmallRig Camera Cage for Canon EOS R8  The camera accäfig f for the Canon EOS R8 is a snug-fitting Käfig that fully encloses the camera. Thus, it offers protection and support for matching accessories for your Canon EOS R8. The grip experience on the hull is improved.   With the help of this camera acäfig you can mount accessories like monitor, microphone, light and handles firmly to the camera. The Käfig features üseveral 1/4-inch 20-lücher and 3/8-inch 16-positioning lücher for ARRI, which include the 3765 top handle, the side handle 2093C , the  Monitor holder 2903 And the Magic Arm 3875 can support t. A microphone and LED video light can be attached to the top cold shoe mount. On the left side is the NATO rail, to which side handles can be mounted. The Käfig is equipped with a "cold" ISO flash shoe, this allows a quick change of accessories. The lower Arca-Swiss quick-release plate accepts Arca tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals and allows quick switching between gimbal, handheld and tripod shooting.   The Käfig locks the camera üvia a lower 1/4-inch 20 screw and two side locking adapters. Integrated rubber pads protect the camera from scratches. Even after mounting the camera fig you ll have unrestricted access to buttons, card slots, flip screen and battery compartment.  Note: Before you install the Käfig, you had to please remove the side locking adapter.   A double-sided screw key is included to facilitate disassembly and assembly. The advantages at a glance: Specially for the Canon EOS R8 constructed. Compatible with the Arca-Swiss clamping system Can be used directly on gimbals from DJI For the technicians: Product dimensions: 148.1 x 60.3 x 103.0 mm Product weight: 140.0 ± 5.0g Material(s): aluminum alloy Suitable for the following camera: Canon EOS R8  Scope of delivery: 1 x Camera accäfig suitable for Canon EOS R8 

Display protector coated for Canon EOS R7 and Canon R50With this LCD protector you get a screen protector that meets the highest demands and scores with the latest technology. Since it is made of 0.3 mm thick glass, it can - unlike conventional films - not throw bubbles. Thus, the brilliance of your display is preserved and it is optimally protected. You can remove the screen protector without leaving any residue, because it can be applied with the principle of auto-absorption. The functionality of any existing touchscreen is also retained. Once you have mounted the screen protector, it is no longer necessary to fold the monitor. So you no longer have to worry about scratching the display if you forget to fold it in.The advantages at a glance:Perfect protection without bubblesSelf-adhesive & removable without leaving any residueREAL GLASS - clear view and color fastnessOnly 0.3 mm thickHardened tempered glass6-layer principle Impact resistantDust repellentAge-resistantFor technicians:Japanese optical glassHardness of the glass: 8HLight transmission: > 90Absorption capacity: 130g/ cm² Resistance of the glass: 12 kg/ cm²CompatibilityCanon EOS R7 and Canon R50Scope of delivery1x screen protector for Canon EOS R7 and Canon R50The pictures are only sample pictures, delivered item may differ from the picture.[youtube;xgdX7iKheVQ;560;315]

Display protector coated for Canon EOS R7 With this LCD protector you get a screen protector that meets the highest demands and scores with the latest technology. Since it is made of 0.3 mm thick glass, it can - unlike conventional films - not throw bubbles. Thus, the brilliance of your display is preserved and it is optimally protected. You can remove the screen protector without leaving any residue, because it can be applied with the principle of auto-absorption. The functionality of any existing touchscreen is also retained. Once you have mounted the screen protector, it is no longer necessary to fold the monitor. So you no longer have to worry about scratching the display if you forget to fold it in.The advantages at a glance:Perfect protection without bubblesSelf-adhesive & removable without leaving any residueREAL GLASS - clear view and color fastnessOnly 0.3 mm thickHardened tempered glass6-layer principle Impact resistantDust repellentAge-resistantFor technicians:Japanese optical glassHardness of the glass: 8HLight transmission: > 90Absorption capacity: 130g/ cm² Resistance of the glass: 12 kg/ cm²CompatibilityCanon EOS R7Scope of delivery1x screen protector for Canon EOS R7The pictures are only sample pictures, delivered item may differ from the picture.[youtube;xgdX7iKheVQ;560;315]

Remote shutter release MA-C like Canon RS-60E3, Pentax CS-205, Contax LA-50 & Samsung SR9NX01 Compatible with the Canon RS-60E3, Pentax CS-205, Contax LA-50 & Samsung SR9NX01 , the MA-C remote shutter release is the perfect tool for photographers who want to maximise their creative potential. This high-quality accessory allows you to trigger your camera from a distance, giving you a whole new dimension of control and precision. Whether it's impressive long exposures at night, fascinating macro shots or perfect self-portraits - the Canon RS-60E3, Pentax CS-205, Contax LA-50 & Samsung SR9NX01 remote shutter release gives you the freedom you need. With a cable length of 80 cm, you have enough leeway to trigger your camera from different angles and distances without touching it directly. This minimises camera shake and ensures razor-sharp images. The ergonomic design of the remote shutter release fits comfortably in the hand and makes operation child's play. Thanks to the robust design and high-quality materials, you will enjoy using this tool for a long time, even with intensive use. The hard-wearing cable can also withstand the challenges of outdoor use and travelling. The Canon RS-60E3, Pentax CS-205, Contax LA-50 & Samsung SR9NX01 remote trigger has been specially developed for the E3 interface and guarantees smooth compatibility. Whether you are a seasoned professional or a passionate amateur photographer, this remote trigger will help you take your photography skills to the next level. In addition, the Panasonic Canon RS-60E3, Pentax CS-205, Contax LA-50 & Samsung SR9NX01 remote shutter release offers a semi-automatic release function. You can press the shutter release button halfway to focus before taking the picture - an important function that helps you to take precise and sharp pictures. With the Panasonic Canon RS-60E3, Pentax CS-205, Contax LA-50 & Samsung SR9NX01 remote shutter release, you not only have a practical accessory in your hand, but also a tool that takes your creativity and precision to a new level. Technical details: Cable length: approx. 90cm Dimensions: approx. 105x34x23 mm Weight: approx. 43g Compatible with the following cameras: (list is not exhaustive)   • Canon EOS RP • Canon EOS M5 • Canon EOS M6 Mark II • Canon EOS RA • Canon EOS 90D • Canon EOS 250D • Canon EOS 2000D • Canon EOS 1300D • Canon EOS R6 • Canon EOS 850D • Canon EOS R • Canon EOS 80D • Canon EOS 77D • Canon EOS 70D • Canon EOS 60Da • Canon EOS 60D • Canon EOS 800D • Canon EOS 760D • Canon EOS 750D • Canon EOS 700D • Canon EOS 650D • Canon EOS 600D • Canon EOS 550D • Canon EOS 500D • Canon EOS450D • Canon EOS 400D • Canon EOS 350D • Canon EOS 300D • Canon EOS 200D • Canon EOS 100D • Canon EOS 1200D • Canon EOS M6 • Canon EOS R6 Mark II • Canon EOS R8 • Canon EOS R100     Scope of delivery: 1x remote release MA-C like Panasonic Lumix DMW-RS1 from JJC Product may differ from the pictures