Wireless Remote Shutter Release – Precise Camera Triggering Without Blurring

Wireless Remote Control & Flash Trigger Yongnuo RF-603 II Yongnuo RF-603 Transceiver-System for Nikon MC-DC216-Channel wireless remote for cameras and flashes - 100m rangeThe RF-603 is a transceiver system, which means that both devices are transmitter and receiver, the function is detected in application. Both transceivers provide the function to trigger lightning unleashed. They can also be used for cable release or wireless remote release of a camera. With these capabilities, the RF-603 offers huge features at a low price. Flash triggering Off-camera flash units or studio flashes can be triggered with the RF-603. Both transceivers come with hot shoe and hot shoe mount. The flash is mounted to one transceiver, the other transceiver is mountet on the camera. You can mount a second flash on the transceiver placed on the camera. (Studio) flash units with 6.3mm or 3.5mm jack can be triggerd with an optional trigger cable.   Camera triggering With the RF-603 Wireless Remote and the included release cable, a camera can be triggered from a large distance. Under optimal conditions the range of the trigger is up to 100m. The release button of the sender focuses the camera when you press the button halfway down and triggers the camera when it's pushed all the way down. Time exposure and continuous shooting is possible if the camera modes are set accordingly. You can also use a single transceiver as a cable release. On cameras where the video function is starded by the photo-shutter button, the video recordings can also start and stop with this trigger. Triggering camera and flashIf you set up the transceivers for camera triggering, mount the receiving transceiver on the cameras hot shoe and ad a flash on its top, you will be able to shot and flash remote. With an optional additional transceiver camera and of-camera flashes could be triggered remote. Technical Details: Type: FSK 2.4GHz wireless triggerRange: approx. 100mChannel: 16Power supply: 2x 2x AAAStandby time: min. 45hMax. trigger voltage: 30VWeight (of one transceiver): approx. 36gDimensions: approx. 3,7 x 3,0 x 8,2cm   Scope of delivery: 2 RF-603N TransceiverCable N3 (MC-DC2) for camera triggering Nikon Df, D7500, D7200, D7100, D7000, D5600, D5500, D5300, D5200, D5100, D5000, D3300, D3200, D3100, D750, D610, D600, D90 Nikon Z7, Z6, Z5, Z7II, Z6IINikon Coolpix P7800, P7700Nikon Coolpix A Note:This wireless flash trigger does not support TTL.RF-603 will not work with RF-602.

Flash and wireless remote shutter Yongnuo RF-603 II like Nikon MC-30 or MC-36   16-channel radio trigger for cameras and flashes - 100m range The RF-603 is a transceiver system, which means that both devices are transmitter and receiver at the same time and the function is recognized depending on the application. Both transceivers offer the function to trigger flashes unleashed. They can also be used as cable and radio remote triggers for cameras. With these possibilities the RF-603 offers an enormous range of functions at a low price.Flash Trigger The RF-603 enables wireless, unleashed triggering of clip-on and studio flashes even from a great distance. For attachable flashes, the transceivers have a flash shoe to insert the flash. The second transceiver is pushed into the hot shoe. On the transceiver plugged on the camera another flash can be plugged on and triggered. (Studio) flash units with 6.3mm or 3.5mm jack socket can be connected to the transceiver with an optionally available trigger cable.Camera shutter release With the RF-603 wireless shutter release and the supplied release cable, cameras can be released even from a great distance. To do this, connect one of the transceivers to the camera with the cable while releasing the camera with the release button of the second one. Alternatively, the transceiver connected by cable can be used directly as a remote cable release. Under optimal conditions the shutter release has a range of up to 100m. The release button has two pressure points. At the first pressure point the camera focuses, at the second one it releases. Long time exposures and serial pictures are possible. However, the corresponding settings on the camera must be made for this. On cameras where the video function is controlled by the photo release button, video recordings can also be started and stopped with this release.Synchronous remote triggering of camera and flash To trigger the camera and the flash synchronously, you plug the transceiver, which is connected to the camera via cable, onto the camera's hot shoe and equip it with a flash on top. This set can be triggered via the second transceiver. With an optionally available transceiver, both the camera and the unleashed flash can be triggered synchronously. Technical details: Type: FSK 2.4GHz radio triggerRange: approx. 100mSynchronization time: 1/200sek.Channels: 16Power supply: 2x AAA eachStandby time: min. 45hMax. ignition voltage: 30VWeight (single transceiver): approx. 36gDimensions: approx. 3.7 x 3.0 x 8.2cm Scope of delivery: 2 RF-603N II transceiversRelease cable N3 (MC-30 / MC-36) for camera Compatible with the following cameras: (list is not exhaustive) • Nikon Z9 • Nikon Z8 • Nikon Z6 • Nikon D850 • Nikon D810 • Nikon D810A • Nikon D6 • Nikon D5 • Nikon D4 • Nikon D4S • Nikon D3 • Nikon D3S • Nikon D3X • Nikon D800 • Nikon D800E • Nikon D700 • Nikon D500 • Nikon D300 • Nikon D200           Note: The RF-603 wireless trigger does not transmit TTL data. All camera and flash settings must be made manually.With a suitable flash adapter, the RF-603 can also be used with most cameras of other brands.The RF-603 is not compatible with the RF-602.  

Flash and wireless remote shutter Yongnuo RF-603 II like Canon RS-80N3 Flash and radio remote shutter release Yongnuo RF-603 II 16-channel radio trigger for cameras and flashes - 100m range The RF-603 is a transceiver system, which means that both devices are transmitter and receiver at the same time and the function is recognized depending on the application. Both transceivers offer the function to trigger flashes unleashed. They can also be used as cable and radio remote triggers for cameras. With these possibilities the RF-603 offers an enormous range of functions at a low price.Flash Trigger The RF-603 enables wireless, unleashed triggering of clip-on and studio flashes even from a great distance. For attachable flashes, the transceivers have a flash shoe to insert the flash. The second transceiver is pushed into the hot shoe. On the transceiver plugged on the camera another flash can be plugged on and triggered. (Studio) flash units with 6.3mm or 3.5mm jack socket can be connected to the transceiver with an optionally available trigger cable.Camera shutter release With the RF-603 wireless shutter release and the supplied release cable, cameras can be released even from a great distance. To do this, connect one of the transceivers to the camera with the cable while releasing the camera with the release button of the second one. Alternatively, the transceiver connected by cable can be used directly as a remote cable release. Under optimal conditions the shutter release has a range of up to 100m. The release button has two pressure points. At the first pressure point the camera focuses, at the second one it releases. Long time exposures and serial pictures are possible. However, the corresponding settings on the camera must be made for this. On cameras where the video function is controlled by the photo release button, video recordings can also be started and stopped with this release.Synchronous remote triggering of camera and flash To trigger the camera and the flash synchronously, you plug the transceiver, which is connected to the camera via cable, onto the camera's hot shoe and equip it with a flash on top. This set can be triggered via the second transceiver. With an optionally available transceiver, both the camera and the unleashed flash can be triggered synchronously.Technical details: Type: FSK 2.4GHz radio triggerRange: approx. 100mSynchronization time: 1/200sek.Channels: 16Power supply: 2x AAA eachStandby time: min. 45hMax. ignition voltage: 30VWeight (single transceiver): approx. 36gDimensions: approx. 3.7 x 3.0 x 8.2cm Compatible with the following cameras: (list is not exhaustive)   • Canon EOS-1D X Mark II • Canon EOS 5DS • Canon EOS 5DS R • Canon EOS 5D Mark IV • Canon EOS 6D Mark II • Canon EOS 7D II • Canon EOS 200D** • Canon EOS 2000D** • Canon EOS 1300D** • Canon EOS M5** • Canon EOS M6** • Canon EOS-1D X • Canon EOS-1D C • Canon EOS-1Ds Mark III • Canon EOS-1Ds Mark II • Canon EOS-1Ds • Canon EOS-1D Mark IV • Canon EOS-1D Mark III • Canon EOS-1D Mark II • Canon EOS-1D • Canon EOS 5D Mark III • Canon EOS 5D Mark II • Canon EOS 5D • Canon EOS 20D • Canon EOS 60Da* • Canon EOS 7D • Canon EOS 50D • Canon EOS 40D • Canon EOS 30D • Canon EOS 10D • Canon EOS D60 • Canon D30 • Canon EOS-1D X Mark III • Canon EOS R5 • Canon EOS R3 • Canon EOS R7** • Canon EOS R10 • Canon EOS R6 Mark II • Canon EOS R1 • Canon EOS R5 Mark II       **Compatible via optional RA-E3 cable Scope of delivery: 2 RF-603N II transceivers1 release cable C3 (RS-80N3) for camera Note: The RF-603 wireless trigger does not transmit TTL data. All camera and flash settings must be made manually. With a suitable flash adapter, the RF-603 can also be used with most cameras of other brands. The RF-603 is not compatible with the RF-602.

Wireless Remote Control & Flash Trigger Yongnuo RF-603 II for Canon RS-60E3   The RF-603 is a transceiver system, which means that both devices are transmitter and receiver, the function is detected in application. Both transceivers provide the function to trigger lightning unleashed. They can also be used for cable release or wireless remote releaseof a camera. With these capabilities, the RF-603 offers huge features at a low price. Flash triggering Off-camera flash units or studio flashes can be triggered with the RF-603. Both transceivers come with hot shoe and hot shoe mount. The flash is mounted to one transceiver, the other transceiver is mountet on the camera. You can mount a second flash on the transceiver placed on the camera. (Studio) flash units with 6.3mm or 3.5mm jack can be triggerd with an optional trigger cable. Camera triggering With the RF-603 Wireless Remote and the included release cable, a camera can be triggered from a large distance. Under optimal conditions the range of the trigger is up to 100m. The release button of the sender focuses the camera when you press the button halfway down and triggers the camera when it's pushed all the way down. Time exposure and continuous shooting is possible if the camera modes are set accordingly. You can also use a single transceiver as a cable release. On cameras where the video function is starded by the photo-shutter button, the video recordings can also start and stop with this trigger. Triggering camera and flash If you set up the transceivers for camera triggering, mount the receiving transceiver on the cameras hot shoe and ad a flash on its top, you will be able to shot and flash remote. With an optional additional transceiver camera and of-camera flashes could be triggered remote. Technical Details: Type: FSK 2.4GHz wireless triggerRange: approx. 100mChannel: 16Power supply: 2x 2x AAAStandby time: min. 45hMax. trigger voltage: 30VWeight (of one transceiver): approx. 36gDimensions: approx. 3,7 x 3,0 x 8,2cm Scope of delivery: 2 RF-603C II TransceiverCable C3 (RS-60E3) for camera triggering Note: This wireless flash trigger does not support TTL.RF-603 will not work with RF-602.

Radio Remote Release Kit Hähnel Captur Timer for FujifilmThe Hähnel Captur LCD Timer works with radio and allows you to control the camera wirelessly according to your wishes. The receiver is plugged onto the camera's hot shoe and connected to the remote release socket with the camera cable. The transmitter can also be connected to the camera with the cable and used as a cable release. The high range of 100m leaves all limits open, whether wildlife, landscape or event photography, the wireless companion from Hähnel is the ideal solution for all cases.All advantages at a glance: Single and serial shot self-timer / interval timer / long exposure mode Image counter Range up to 100m DCM Digital channel adjustment Operation with 2x AA batteries Frequency selection for individual control of multiple cameras Thanks to the 2.4GHz reception frequency, transmission through walls is possible LCD display with backlightcompatibility:FinepixS1 / GFX50R / GFX50S / GFX100 / X30 / X70 / X100F / X100T / X-A1 / X-A2 / X-A3 / X-A5 / X-A7 / X-A10 / X-E1 / X-E2 / X-E2S / X- E3 / XF10 / X-H1 / X-M1 / X-Pro2 / X-Q1 / X-Q2 / X-T1 / X-T2 / X-T3 / X-T4 / X-T10 / X-T20 / X-T30 / X-T100 * Enumeration not exhaustive Scope of delivery:1x Hähnel Captur Timer Module 1x Hähnel Captur receiver Fuji 1x connection cable F1 1x connection cable F2 4x AA battery

Radio Remote Release Kit Hähnel Captur Timer for SonyThe Hähnel Captur LCD Timer works with radio and allows you to control the camera wirelessly according to your wishes. The receiver is plugged onto the camera's hot shoe and connected to the remote release socket with the camera cable. The transmitter can also be connected to the camera with the cable and used as a cable release. The high range of 100m leaves all limits open, whether wildlife, landscape or event photography, the wireless companion from Hähnel is the ideal solution for all cases.All advantages at a glance:Single and serial shot self-timer / interval timer / long exposure mode Image counter Range up to 100m DCM Digital channel adjustment Operation with 2x AA batteries Frequency selection for individual control of multiple cameras Thanks to the 2.4GHz reception frequency, transmission through walls is possible LCD display with backlightcompatibility:* Enumeration not exhaustive A7 / A7MarkII / A7MarkIII / A7R / A7RMarkII / A7RMarkIII / A7RMarkIV/ A7MarkIV/ A7S / A7SMarkII / A9 / A58/ A68/ A3000 / A3500 / A5000 / A5100 / A6000 / A6100 / A6300 / A6400 / A6500 / A6600 / HX50 / HX60 / HX80 / HX300 / HX400 / NEX-3N / RX10 /RX10MarkII / RX10Mark III / RX10MarkIV/ RX100 / RX100MarkII / RX100MarkIII / RX100MarkIV/ RX100MarkV/ RX100Mark VI / RX100MarkVII / WX500Scope of delivery:1x Hähnel Captur Timer Module 1x Hähnel Captur receiver Sony 1x connection cable S2 4x AA battery

Radio Remote Release Kit Hähnel Captur Timer for Panasonic and OlympusThe Hähnel Captur LCD Timer works with radio and allows you to control the camera wirelessly according to your wishes. The receiver is plugged onto the camera's hot shoe and connected to the remote release socket with the camera cable. The transmitter can also be connected to the camera with the cable and used as a cable release. The high range of 100m leaves all limits open, whether wildlife, landscape or event photography, the wireless companion from Hähnel is the ideal solution for all cases.All advantages at a glance:Single and serial shotself-timer / interval timer / long exposure modeImage counterRange up to 100mDCM Digital channel adjustmentOperation with 2x AA batteriesFrequency selection for individual control of multiple camerasThanks to the 2.4GHz reception frequency, transmission through walls is possibleLCD display with backlightcompatibility:Olympus: E-30 / E-400 / E-410 / E-420 / E-450 / E-510 /E-520 / E-550 / E-600 / E-620 / E-M1 / E-M1MarkII / E-M1X / E-M5 / E-M5MarkII / E-M10 / E-M10MarkII / E-P1/ E-P2 / E-P3 / E- P5 / E-PL2 / E-PL3 / E-PL5 / E-PL6 / E-PL7 / E-PL8 / E-PM1 / E-PM2 / PEN-F / SP-100 / SP-510 / SP-550 / SP-560 / SP-565 / SP570 / SP590 / Stylus1 / Stylus1S / XZ-1 / XZ-2 *Panasonic: DC- S5 / FZ20 / FZ30 / FZ50 / FZ100 / FZ150 / FZ200 / FZ300 / FZ330 / FZ1000 / FZ1000MarkII / FZ2000 / FZ2500 / G1 / G2 / G3 / G5 / G6 / G7 / G9 / G10 / G70 / G80 / G81 / G85 / G90 / G91 / G95 / GF1 / GH1 / GH2 / GH3/ GH4 / GH5 / GH5S / GX1 GX7 / GX8 / L1/ L10 / LC1 / S1 / S1H / S1M / S1R / S1RM ** Listing not exhaustiveScope of delivery:1x Hähnel Captur Timer Module1x Hähnel Captur receiver P/O1x connection cable O11x connection cable P24x AA battery

Radio Remote Release Kit Hähnel Captur Timer for Nikon The Hähnel Captur LCD Timer works with radio and allows you to control the camera wirelessly according to your wishes. The receiver is plugged onto the camera's hot shoe and connected to the remote release socket with the camera cable. The transmitter can also be connected to the camera with the cable and used as a cable release. The high range of 100m leaves all limits open, whether wildlife, landscape or event photography, the wireless companion from Hähnel is the ideal solution for all cases. All advantages at a glance: Single and serial shot self-timer / interval timer / long exposure mode Image counter Range up to 100m DCM Digital channel adjustment Operation with 2x AA batteries Frequency selection for individual control of multiple cameras Thanks to the 2.4GHz reception frequency, transmission through walls is possible LCD display with backlight compatibility: Connection same as MC-DC2: • Nikon Z7 • Nikon Z7 II • Nikon Z6 • Nikon Z6 II • Nikon Z6 III • Nikon Z5 • Nikon D90 • Nikon D3100 • Nikon D3200 • Nikon D3300 • Nikon D5000 • Nikon D5100 • Nikon D5200 • Nikon D5300 • Nikon D5500 • Nikon D5600 • Nikon D7000 • Nikon D7100 • Nikon D7200 • Nikon D7500 • Nikon D780 • Nikon Df • Nikon COOLPIX P7700 • Nikon COOLPIX P7800 • Nikon COOLPIX A • Nikon COOLPIX P1000 • Nikon COOLPIX P950 •  •  •  Connection same as MC-36A: • Nikon Z9 • Nikon Z8 • Nikon Z6 • Nikon D850 • Nikon D810 • Nikon D810A • Nikon D6 • Nikon D5 • Nikon D4 • Nikon D4S • Nikon D3 • Nikon D3S • Nikon D3X • Nikon D800 • Nikon D800E • Nikon D700 • Nikon D500 • Nikon D300 • Nikon D200           Scope of delivery: 1x Hähnel Captur Timer Module 1x Hähnel Captur receiver Nikon 1x connection cable N1 1x connection cable N2 4x AA battery

Radio Remote Release Kit Hähnel Captur Timer for Canon The Hähnel Captur LCD Timer works with radio and allows you to control the camera wirelessly according to your wishes. The receiver is plugged onto the camera's hot shoe and connected to the remote release socket with the camera cable. The transmitter can also be connected to the camera with the cable and used as a cable release. The high range of 100m leaves all limits open, whether wildlife, landscape or event photography, the wireless companion from Hähnel is the ideal solution for all cases. All advantages at a glance: Single and serial shot self-timer / interval timer / long exposure mode Image counter Range up to 100m DCM Digital channel adjustment Operation with 2x AA batteries Frequency selection for individual control of multiple cameras Thanks to the 2.4GHz reception frequency, transmission through walls is possible LCD display with backlight Compatibility: Connection same as RS-80N3 • Canon EOS-1D X Mark II • Canon EOS 5DS • Canon EOS 5DS R • Canon EOS 5D Mark IV • Canon EOS 6D Mark II • Canon EOS 7D II • Canon EOS 200D** • Canon EOS 2000D** • Canon EOS 1300D** • Canon EOS M5** • Canon EOS M6** • Canon EOS-1D X • Canon EOS-1D C • Canon EOS-1Ds Mark III • Canon EOS-1Ds Mark II • Canon EOS-1Ds • Canon EOS-1D Mark IV • Canon EOS-1D Mark III • Canon EOS-1D Mark II • Canon EOS-1D • Canon EOS 5D Mark III • Canon EOS 5D Mark II • Canon EOS 5D • Canon EOS 20D • Canon EOS 60Da* • Canon EOS 7D • Canon EOS 50D • Canon EOS 40D • Canon EOS 30D • Canon EOS 10D • Canon EOS D60 • Canon D30 • Canon EOS-1D X Mark III • Canon EOS R5 • Canon EOS R3 • Canon EOS R7** • Canon EOS R10 • Canon EOS R6 Mark II • Canon EOS R1 • Canon EOS R5 Mark II     Connection same as RS-60E3   • Canon EOS RP • Canon EOS M5 • Canon EOS M6 Mark II • Canon EOS RA • Canon EOS 90D • Canon EOS 250D • Canon EOS 2000D • Canon EOS 1300D • Canon EOS R6 • Canon EOS 850D • Canon EOS R • Canon EOS 80D • Canon EOS 77D • Canon EOS 70D • Canon EOS 60Da • Canon EOS 60D • Canon EOS 800D • Canon EOS 760D • Canon EOS 750D • Canon EOS 700D • Canon EOS 650D • Canon EOS 600D • Canon EOS 550D • Canon EOS 500D • Canon EOS450D • Canon EOS 400D • Canon EOS 350D • Canon EOS 300D • Canon EOS 200D • Canon EOS 100D • Canon EOS 1200D • Canon EOS M6 • Canon EOS R6 Mark II • Canon EOS R8 • Canon EOS R100     Scope of delivery: 1x Hähnel Captur Timer Module 1x Hähnel Captur receiver Canon 1x connection cable C1 1x connection cable C2 4x AA battery

Additional Receiver Fujifilm Hähnel CapturIn conjunction with the set, the additional receiver enables the wireless triggering of further flash units. The number of flash units is not limited.compatibility: Hähnel Captur radio remote release Scope of delivery: 1x additional receiver Fujifilm Hähnel Captur

Additional Receiver Olympus Panasonic Hähnel CapturIn conjunction with the set, the additional receiver enables the wireless triggering of further flash units. The number of flash units is not limited.compatibility: Hähnel Captur radio remote release Scope of delivery: 1x additional receiver Olympus Panasonic Hähnel Captur

Additional Receiver Sony Hähnel CapturIn conjunction with the set, the additional receiver enables the wireless triggering of further flash units. The number of flash units is not limited.compatibility: Hähnel Captur radio remote release Scope of delivery: 1x additional receiver Sony Hähnel Captur

Additional Receiver Nikon Hähnel CapturIn conjunction with the set, the additional receiver enables the wireless triggering of further flash units. The number of flash units is not limited.compatibility: Hähnel Captur radio remote release Scope of delivery: 1x additional receiver Nikon Hähnel Captur

Additional Reciver Canon Hähnel CapturProduct description:In conjunction with the set, the additional receiver enables the wireless triggering of further flash units. The number of flash units is not limited.compatibility:Hähnel Captur radio remote releaseScope of delivery:1x additional receiver Canon Hähnel Captur

Radio remote release up to 100m from Hähnel for FujifilmThe Hähnel Captur Fuji radio trigger contains both transmitter and receiver in one compact housing. Easy handling with a long range (over 100m) make this product a "must-have" for the DSLR user. For the different connections a corresponding adapter cable is included in delivery. Both transmitter and receiver are equipped with an on/off switch. Two Mignon AA batteries/rechargeable batteries serve as energy source. Hähnel Captur as radio remote control:Continuous shooting and long term recording. The shutter release transmits at 2.4GHz - a worldwide licence-free frequency.Hähnel Captur as flash trigger:The Captur can also be used as a remote trigger for flash units, for unleashed flashes. The transmitter is mounted on the centre contact of the camera. The receiver is attached to the plug-in foot of the flash unit. Several flash units can be triggered simultaneously with additional receivers. The available additional receiver enables the wireless triggering of further flash units in conjunction with the set. The number of flash units is not limited.All advantages at a glance:Wireless remote release for DSLR/DSLM camerasWireless flash trigger for DSLR/DSLM flash unitsConnector plugs of the respective manufacturers includedFor autofocus, continuous shooting and BULB shootingPhotography, High Speed Photography and Wildlife PhotographyPowered by AA batteriesDCM - Digital Channel Matchingcompatibility:FinepixS1 / GFX50R / GFX50S / GFX100 / X30 / X70 / X100F / X100T / X-A1 / X-A2 / X-A3 / X-A5 / X-A7 / X-A10 / X-E1 / X- E2 / X-E2S / X-E3 / XF10 / X-H1 / X-M1 / X-Pro2 / X-Q1 / X-Q2 / X-T1 / X-T2 / X-T3 / X-T4 / X-T10 / X-T20 / X-T30 / X-T100* Listing not exhaustiveScope of delivery:1x Cockerel Captur Transmitter1x Hähnel Captur Receiver4x Mignon AA batteries1x connection cable F11x connection cable F2

Radio remote release up to 100m from Hähnel for Olympus Panasonic The Hähnel Captur Olympus Panasonic radio trigger contains both transmitter and receiver in one compact housing. Easy handling with a long range (over 100m) make this product a "must-have" for the DSLR user. For the different connections a corresponding adapter cable is included in delivery. Both transmitter and receiver are equipped with an on/off switch. Two Mignon AA batteries/rechargeable batteries serve as energy source. Hähnel Captur as radio remote control: Continuous shooting and long term recording. The shutter release transmits at 2.4GHz - a worldwide licence-free frequency.Hähnel Captur as flash trigger: The Captur can also be used as a remote trigger for flash units, for unleashed flashes. The transmitter is mounted on the centre contact of the camera. The receiver is attached to the plug-in foot of the flash unit. Several flash units can be triggered simultaneously with additional receivers. The available additional receiver enables the wireless triggering of further flash units in conjunction with the set. The number of flash units is not limited.All advantages at a glance:Wireless remote release for DSLR/DSLM cameras Wireless flash trigger for DSLR/DSLM flash units Connector plugs of the respective manufacturers included For autofocus, continuous shooting and BULB shooting Photography, High Speed Photography and Wildlife Photography Powered by AA batteries DCM - Digital Channel Matchingcompatibility: Olympus: E-30 / E-400 / E-410 / E-420 /E-450 / E-510 /E-520 / E-550 / E-600 / E-620 / E-M1 / E-M1MarkII / E-M1X / E-M5 / E-M5MarkII / E-M10 / E-M10MarkII / E-P1/ E-P2 / E-P3 / E-P5 / E-PL2 / E-PL3 / E-PL5 / E-PL6 / E-PL7 / E-PL8 / E-PM1 / E-PM2 / PEN-F / SP-100 / SP-510 / SP-550 / SP-560 / SP-565 / SP570 / SP590 / Stylus1 / Stylus1S / XZ-1 / XZ-2 / Panasonic: DC-S5 / FZ20 / FZ30 / FZ50 / FZ100 / FZ150 / FZ200 / FZ300 / FZ330 / FZ1000 / FZ1000MarkII / FZ2000 / FZ2500 / G1 / G2 / G3 / G5 / G6 / G7 / G9 / G10 / G70 / G80 / G81 / G85 / G90 / G91 / G95 / GF1 / GH1 / GH2 / GH3/ GH4 / GH5 / GH5S / GX1 GX7 / GX8 / L1/ L10 / LC1 / S1 / S1H / S1M / S1R / S1RM * Listing not exhaustive Scope of delivery: 1x Cockerel Captur Transmitter 1x Hähnel Captur Receiver 4x Mignon AA batteries 1x connection cable O1 1x connection cable O2

Radio Remote Trigger Sony Hähnel CapturThe Hähnel Captur Sony radio trigger contains both transmitter and receiver in one compact housing. Easy handling with a long range (over 100m) make this product a "must-have" for the DSLR user. For the different connections a corresponding adapter cable is included in delivery. Both transmitter and receiver are equipped with an on/off switch. Two Mignon AA batteries/rechargeable batteries serve as energy source. Hähnel Captur as radio remote control: Continuous shooting and long term recording. The shutter release transmits at 2.4GHz - a worldwide licence-free frequency.Hähnel Captur as flash trigger: The Captur can also be used as a remote trigger for flash units, for unleashed flashes. The transmitter is mounted on the centre contact of the camera. The receiver is attached to the plug-in foot of the flash unit. Several flash units can be triggered simultaneously with additional receivers. The available additional receiver enables the wireless triggering of further flash units in conjunction with the set. The number of flash units is not limited.All advantages at a glance:Wireless remote release for DSLR/DSLM cameras Wireless flash trigger for DSLR/DSLM flash units Connector plugs of the respective manufacturers included For autofocus, continuous shooting and BULB shooting Photography, High Speed Photography and Wildlife Photography Powered by AA batteries DCM - Digital Channel Matchingcompatibility: A1 / A7 / A7MarkII / A7MarkIII / A7R / A7RMarkII / A7RMarkIII / A7RMarkIV/ A7S / A7SMarkII / A7SMARKIII/ A9 / A58/ A68/ A3000 / A3500 / A5000 / A5100 / A6000 / A6100 / A6300 / A6400 / A6500 / A6600 / HX50 / HX50V / HX60 / HX60V / HX80 / HX300 / HX400 / NEX-3N / RX10 /RX10MarkII / RX10Mark III / RX10MarkIV/ RX100 / RX100MarkII / RX100MarkIII / RX100MarkIV/  RX100MarkV/ RX100Mark VI / RX100MarkVII / WX500 / ZV-1* Listing not exhaustive Scope of delivery: 1x Cockerel Captur Transmitter 1x Hähnel Captur Receiver 4x Mignon AA batteries 1x connection cable S2

Radio Remote Trigger Nikon Hähnel Captur The Hähnel Captur Nikon radio trigger contains both transmitter and receiver in one compact housing. Easy handling with a long range (over 100m) make this product a "must-have" for the DSLR user. For the different connections a corresponding adapter cable is included in delivery. Both transmitter and receiver are equipped with an on/off switch. Two Mignon AA batteries/rechargeable batteries serve as energy source. Hähnel Captur as radio remote control: Continuous shooting and long term recording. The shutter release transmits at 2.4GHz - a worldwide licence-free frequency. Hähnel Captur as flash trigger: The Captur can also be used as a remote trigger for flash units, for unleashed flashes. The transmitter is mounted on the centre contact of the camera. The receiver is attached to the plug-in foot of the flash unit. Several flash units can be triggered simultaneously with additional receivers. The available additional receiver enables the wireless triggering of further flash units in conjunction with the set. The number of flash units is not limited. All advantages at a glance: Wireless remote release for DSLR/DSLM cameras Wireless flash trigger for DSLR/DSLM flash units Connector plugs of the respective manufacturers included For autofocus, continuous shooting and BULB shooting Photography, High Speed Photography and Wildlife Photography Powered by AA batteries DCM - Digital Channel Matching compatibility: Connection same as MC-DC2: • Nikon Z7 • Nikon Z7 II • Nikon Z6 • Nikon Z6 II • Nikon Z6 III • Nikon Z5 • Nikon D90 • Nikon D3100 • Nikon D3200 • Nikon D3300 • Nikon D5000 • Nikon D5100 • Nikon D5200 • Nikon D5300 • Nikon D5500 • Nikon D5600 • Nikon D7000 • Nikon D7100 • Nikon D7200 • Nikon D7500 • Nikon D780 • Nikon Df • Nikon COOLPIX P7700 • Nikon COOLPIX P7800 • Nikon COOLPIX A • Nikon COOLPIX P1000 • Nikon COOLPIX P950 •  •  •  Connection same as MC-36A: • Nikon Z9 • Nikon Z8 • Nikon Z6 • Nikon D850 • Nikon D810 • Nikon D810A • Nikon D6 • Nikon D5 • Nikon D4 • Nikon D4S • Nikon D3 • Nikon D3S • Nikon D3X • Nikon D800 • Nikon D800E • Nikon D700 • Nikon D500 • Nikon D300 • Nikon D200           Scope of delivery: 1x Cockerel Captur Transmitter 1x Hähnel Captur Receiver 4x Mignon AA batteries 1x connection cable N1 1x connection cable N2

Radio Remote Release Canon Hähnel Captur   The Hähnel Captur Canon radio trigger contains both transmitter and receiver in one compact housing. Easy handling with a long range (over 100m) make this product a "must-have" for the DSLR user. For the different connections a corresponding adapter cable is included in delivery. Both transmitter and receiver are equipped with an on/off switch. Two Mignon AA batteries/rechargeable batteries serve as energy source. Hähnel Captur as radio remote control: Continuous shooting and long term recording. The shutter release transmits at 2.4GHz - a worldwide licence-free frequency. Hähnel Captur as flash trigger: The Captur can also be used as a remote trigger for flash units, for unleashed flashes. The transmitter is mounted on the centre contact of the camera. The receiver is attached to the plug-in foot of the flash unit. Several flash units can be triggered simultaneously with additional receivers. The available additional receiver enables the wireless triggering of further flash units in conjunction with the set. The number of flash units is not limited. All advantages at a glance: Wireless remote release for DSLR/DSLM cameras Wireless flash trigger for DSLR/DSLM flash units Connector plugs of the respective manufacturers included For autofocus, continuous shooting and BULB shooting Photography, High Speed Photography and Wildlife Photography Powered by AA batteries DCM - Digital Channel Matching Compatibility: Connection same as RS-80N3 • Canon EOS-1D X Mark II • Canon EOS 5DS • Canon EOS 5DS R • Canon EOS 5D Mark IV • Canon EOS 6D Mark II • Canon EOS 7D II • Canon EOS 200D** • Canon EOS 2000D** • Canon EOS 1300D** • Canon EOS M5** • Canon EOS M6** • Canon EOS-1D X • Canon EOS-1D C • Canon EOS-1Ds Mark III • Canon EOS-1Ds Mark II • Canon EOS-1Ds • Canon EOS-1D Mark IV • Canon EOS-1D Mark III • Canon EOS-1D Mark II • Canon EOS-1D • Canon EOS 5D Mark III • Canon EOS 5D Mark II • Canon EOS 5D • Canon EOS 20D • Canon EOS 60Da* • Canon EOS 7D • Canon EOS 50D • Canon EOS 40D • Canon EOS 30D • Canon EOS 10D • Canon EOS D60 • Canon D30 • Canon EOS-1D X Mark III • Canon EOS R5 • Canon EOS R3 • Canon EOS R7** • Canon EOS R10 • Canon EOS R6 Mark II • Canon EOS R1 • Canon EOS R5 Mark II       Connection same as RS-60E3   • Canon EOS RP • Canon EOS M5 • Canon EOS M6 Mark II • Canon EOS RA • Canon EOS 90D • Canon EOS 250D • Canon EOS 2000D • Canon EOS 1300D • Canon EOS R6 • Canon EOS 850D • Canon EOS R • Canon EOS 80D • Canon EOS 77D • Canon EOS 70D • Canon EOS 60Da • Canon EOS 60D • Canon EOS 800D • Canon EOS 760D • Canon EOS 750D • Canon EOS 700D • Canon EOS 650D • Canon EOS 600D • Canon EOS 550D • Canon EOS 500D • Canon EOS450D • Canon EOS 400D • Canon EOS 350D • Canon EOS 300D • Canon EOS 200D • Canon EOS 100D • Canon EOS 1200D • Canon EOS M6 • Canon EOS R6 Mark II • Canon EOS R8 • Canon EOS R100     Scope of delivery: 1x Cockerel Captur Transmitter 1x Hähnel Captur Receiver 4x Mignon AA batteries 1x connection cable C1

IR Module Hähnel Captur ProThe Captur Pro module contains the same time control functions as the Timer module. Additionally, sensors for camera triggering are integrated into the Pro Module. For protection, the Pro Module is equipped with a silicone cover, also ideal for outdoor use. Two Mignon AA batteries/rechargeable batteries serve as energy source.Noise sensor: The sensitivity for the noise can be adjusted. Loud or quiet, depending on which the camera is triggered.Light sensor: The sensitivity for triggering, light or dark, can also be set here. This allows you to take great pictures, especially during fireworks or thunderstorms.R-sensor: In conjunction with the IR module, you get a light sensor that triggers the camera if there is an interruption.Laser sensor. When using a laser pointer, a light barrier can also be set up here. The trigger point can be adjusted much more precisely with the laser. Here too, the camera is triggered in the event of an interruption (laser pointer not included).Aux connection: The connection allows the use of own developed sensors. For all sensor releases, the release delay, duration of the release (0-5 sec.) and number of shots can be set. The IR module acts as an IR transmitter for the Pro module.All advantages at a glance:4 built-in sensors (light, sound, laser AUX, IR)AUX input for those who want to connect external sensors. (temperature sensor, pressure plate etc)Timer functions, delayed shooting, interval timer, long exposureShutter release with auto focus, single and continuous shooting, BULBWireless connection to the camera via 'Captur Kit' (sold separately)With the studio light cable you can trigger your studio lights by radioOperation with AA batteries (not included)DCM - Digital Channel Matching1/4" threaded connectioncompatibility:Alle Captur von Hähnel:FujifilmSonyNikonCanonOlympus & PanasonicScope of delivery1x IR module Hähnel Captur Pro