CHF 53.00*
Ready for immediate shipment, arrival in: 1-2 Working Days
✅ Pick up after order in Langnau possible
- own warehouse
- fast shipping
- shipping with Swiss Post
- pick-up after order possible
Wireless Remote Control & Flash Trigger Yongnuo RF-603 II for Canon RS-60E3
The RF-603 is a transceiver system, which means that both devices are transmitter and receiver, the function is detected in application. Both transceivers provide the function to trigger lightning unleashed. They can also be used for cable release or wireless remote releaseof a camera. With these capabilities, the RF-603 offers huge features at a low price.
Flash triggering
Off-camera flash units or studio flashes can be triggered with the RF-603. Both transceivers come with hot shoe and hot shoe mount. The flash is mounted to one transceiver, the other transceiver is mountet on the camera. You can mount a second flash on the transceiver placed on the camera. (Studio) flash units with 6.3mm or 3.5mm jack can be triggerd with an optional trigger cable.
Camera triggering
With the RF-603 Wireless Remote and the included release cable, a camera can be triggered from a large distance. Under optimal conditions the range of the trigger is up to 100m. The release button of the sender focuses the camera when you press the button halfway down and triggers the camera when it's pushed all the way down. Time exposure and continuous shooting is possible if the camera modes are set accordingly. You can also use a single transceiver as a cable release.
On cameras where the video function is starded by the photo-shutter button, the video recordings can also start and stop with this trigger.
Triggering camera and flash
If you set up the transceivers for camera triggering, mount the receiving transceiver on the cameras hot shoe and ad a flash on its top, you will be able to shot and flash remote.
With an optional additional transceiver camera and of-camera flashes could be triggered remote.
Technical Details:
Type: FSK 2.4GHz wireless trigger
Range: approx. 100m
Channel: 16
Power supply: 2x 2x AAA
Standby time: min. 45h
Max. trigger voltage: 30V
Weight (of one transceiver): approx. 36g
Dimensions: approx. 3,7 x 3,0 x 8,2cm
Scope of delivery:
2 RF-603C II Transceiver
Cable C3 (RS-60E3) for camera triggering
Note:
This wireless flash trigger does not support TTL.
RF-603 will not work with RF-602.
Yongnuo ist ein chinesischer Hersteller von Blitzzubehör für Fotografen
Die Firma besteht schon länger und bringt immer wieder innovative Produkte auf den Markt. Besonders zu erwähnen ist hier der Yongnuo YN560 III, welcher über einen eingebauten Empfänger verfügt und per Funk reguliert werden kann. Die komfortablere Version für die Funkauslösung ist der Yongnuo YN 622, der für Canon und Nikon verfügbar ist und die gesamten TTL Daten an den Blitz per Funk überträgt.
Das momentane Top Blitzmodell von Yongnuo ist der YN 685 für Canon welcher sich über den YN 622C fernsteuern lässt.
Falls Sie eine Deutsche Anleitung zu Yongnuo Produkten benötigen, die finden Sie nur bei uns und zwar hier

Login
22 May 2019 13:46
Top Gerät
Nur zum empfehlen
31 July 2018 14:46
Wichtige Hilfsmittel prompt und einwandfrei geliefert
Einwandfreies Produkt - eine ausführlichere Anleitung oder ein Link zu einer Anwender-Dokumentation wären bei solchen Produkten wohl ebenfalls hilfreich.
31 July 2018 10:09
Günstig und funktioniert einwandfrei
Verwende den RF-603 zusammen mit den Yongnuo YN-560 III, funktioniert einwandfrei. Schade, dass der Sender nicht mit den RF-601RX Studioblitzempfängern kompatibel ist.
26 July 2018 13:10
funktioniert einwandfrei
habe den Funkfernauslöser zusammen mit 3 Yongnuo YN-560 IV Blitze gekauft.










