Magnetic Filters in Photography

You want to expose for half a minute in the middle of the day so the lake turns to glass and the clouds streak across the sky? That takes 10 stops, and that is what the Haida NanoPro Magnetic ND 3.0 in 67mm delivers. It holds magnetically on the adapter ring and snaps on in a second. Please note: this filter ships without an adapter ring. If you do not own one yet, you need to order the ring separately. ND 3.0 (1000x): cuts light by 10 stops Magnetic mount: snap on instead of screwing in Glass just 0.8mm thin, stackable with other Haida magnetic filters Scratch-resistant, water- and oil-repellent NanoPro coating Supplied without magnetic adapter ring Long exposures in broad daylight Ten stops turn fractions of a second into whole seconds The filter lengthens your exposure time by a factor of 1000. 1/60 s becomes roughly 15 seconds, 1/15 s a good minute. Moving water turns into a smooth surface, clouds draw streaks across the sky and passers-by vanish from a busy square. Focus first, then add the filter Through a 10-stop filter you see next to nothing in the viewfinder, and autofocus often hunts. With a screw-in filter that means: filter off, focus, screw it back on and hope nothing shifted. Here you frame and focus while the image is still bright and simply snap the filter on afterwards. The focus ring stays where it is. Thin glass, tough coating The glass is only 0.8mm thick, so the filter sits very flat. The NanoPro coating is scratch resistant and repels water and oil. Spray on the shore or a fingerprint wipes off quickly with a microfibre cloth. Works on smaller lenses too With a Haida magnetic step-up ring, the 67mm filter also fits lenses with a smaller filter thread, such as 62mm. The step-up ring doubles as the adapter ring, so that lens needs no second ring. What this looks like in practice At the lake around midday The camera is on the tripod and the adapter ring is on the lens. At f/11 and ISO 100 the camera meters 1/60 s and the water is choppy. You focus on the jetty, switch to manual focus and snap on the ND 3.0. Now you expose for around 15 seconds: the waves are gone and the jetty stands sharp above a calm surface. If a cloud moves in front of the sun, you take the filter off, meter again and put it back on. What you should know before ordering The adapter ring is not included The filter has no screw thread and cannot be mounted directly on a lens. You need either the Haida magnetic adapter ring in 67mm or a magnetic step-up ring to 67mm. If you already own a Haida magnetic filter with ring, you have everything you need. A tripod is a must With 10 stops you are always shooting in whole seconds, which cannot be handheld. For exposures beyond 30 seconds you also need bulb mode and a remote release with timer. On DSLRs it is worth covering the viewfinder so no light leaks in from behind. Too strong for soft water with texture If you only want to blur a stream slightly or you are shooting at dusk, exposure times with 10 stops quickly become impractically long. The magnetic 6-stop ND filter is the better choice there. The two can be stacked, but with every extra filter the risk of darkened corners on wide-angle lenses increases. The magnet holds, but not against hard knocks In normal use the filter sits securely. A solid bump against the lens can dislodge it, though. Keep that in mind over water, on a bridge or in a crowd. Technical details at a glance Manufacturer: Haida Series: NanoPro Magnetic Item number: HD4826-67 Filter type: neutral density filter, magnetic Density: ND 3.0 (1000x) Light reduction: 10 stops Diameter: 67mm Glass thickness: 0.8mm Material: optical glass Coating: NanoPro, scratch resistant, water and oil repellent Mount: magnetic, on Haida magnetic adapter ring (not included) What's in the box 1 x Haida NanoPro Magnetic ND 3.0 (1000x) filter, 67mm Magnetic adapter ring not included

The magnetic adapter ring is already on your lens and you are missing a 6-stop neutral density filter? That is exactly what the Haida NanoPro Magnetic ND 1.8 in 82mm is for. It snaps on magnetically in a second and lengthens your exposure time by a factor of 64. Please note: this filter ships without an adapter ring. If you do not own one yet, you need to order the ring separately. ND 1.8 (64x): cuts light by 6 stops Magnetic mount: snap on instead of screwing in Glass just 0.8mm thin, stackable with other Haida magnetic filters Fits 49 to 77mm threads via magnetic step-up rings Supplied without magnetic adapter ring Longer exposures without touching the filter thread Six stops for water, clouds and wide apertures 1/60 s becomes roughly 1 s, 1/4 s becomes 16 s. That is enough to smooth a stream or waterfall, calm waves or show clouds in motion. In bright sun it also lets you shoot or film wide open without running out of shutter speed. Swap filters in a second The filter snaps onto the ring and comes off just as quickly. No cross-threading, no fiddling with cold fingers. It is a real help when setting up: frame and focus while the viewfinder is still bright, then add the ND filter afterwards. Thin glass, tough coating The glass is only 0.8mm thick, so the filter sits very flat. The NanoPro coating is scratch resistant and repels water and oil. Spray from a waterfall or a fingerprint wipes off quickly with a microfibre cloth. One filter for nearly all your lenses 82mm is the size that takes you furthest. With Haida magnetic step-up rings, the same filter fits lenses with 49, 55, 58, 62, 67, 72 or 77mm filter threads. The step-up ring doubles as the adapter ring, so you buy the glass once and only add one ring per lens. What this looks like in practice At a mountain stream in changing light The camera is on the tripod and the adapter ring is on the lens. You compose without a filter, focus on the rock in the foreground and snap on the ND 1.8. At f/11 and ISO 100 you end up at one to two seconds: the water turns soft but keeps its texture. When the sun comes out from behind a cloud, you swap to a stronger filter in a second or take it off altogether. What you should know before ordering The adapter ring is not included The filter has no screw thread and cannot be mounted directly on a lens. You need either the Haida magnetic adapter ring in 82mm or a magnetic step-up ring to 82mm. If you already own a Haida magnetic filter with ring, you have everything you need. The magnet holds, but not against hard knocks In normal use the filter sits securely. A solid bump against the lens can dislodge it, though. Keep that in mind over water, on a bridge or in a crowd. 6 stops are not enough for every long exposure For exposures of half a minute or more in bright daylight this filter is too weak. That is a job for the magnetic 10-stop ND filter. The two can be stacked, but with every extra filter the risk of darkened corners on wide-angle lenses increases. Technical details at a glance Manufacturer: Haida Series: NanoPro Magnetic Item number: HD4825-82 Filter type: neutral density filter, magnetic Density: ND 1.8 (64x) Light reduction: 6 stops Diameter: 82mm Glass thickness: 0.8mm Material: optical glass Coating: NanoPro, scratch resistant, water and oil repellent Mount: magnetic, on Haida magnetic adapter ring (not included) What's in the box 1 x Haida NanoPro Magnetic ND 1.8 (64x) filter, 82mm Magnetic adapter ring not included

The magnetic adapter ring is already on your lens and you are missing a 6-stop neutral density filter? That is exactly what the Haida NanoPro Magnetic ND 1.8 in 67mm is for. It snaps on magnetically in a second and lengthens your exposure time by a factor of 64. Please note: this filter ships without an adapter ring. If you do not own one yet, you need to order the ring separately. ND 1.8 (64x): cuts light by 6 stops Magnetic mount: snap on instead of screwing in Glass just 0.8mm thin, stackable with other Haida magnetic filters Fits smaller threads via magnetic step-up ring Supplied without magnetic adapter ring Longer exposures without touching the filter thread Six stops for water, clouds and wide apertures 1/60 s becomes roughly 1 s, 1/4 s becomes 16 s. That is enough to smooth a stream or waterfall, calm waves or show clouds in motion. In bright sun it also lets you shoot or film wide open without running out of shutter speed. Swap filters in a second The filter snaps onto the ring and comes off just as quickly. No cross-threading, no fiddling with cold fingers. It is a real help when setting up: frame and focus while the viewfinder is still bright, then add the ND filter afterwards. Thin glass, tough coating The glass is only 0.8mm thick, so the filter sits very flat. The NanoPro coating is scratch resistant and repels water and oil. Spray from a waterfall or a fingerprint wipes off quickly with a microfibre cloth. Works on smaller lenses too With a Haida magnetic step-up ring, the 67mm filter also fits lenses with a smaller filter thread, such as 62mm. The step-up ring doubles as the adapter ring, so that lens needs no second ring. What this looks like in practice At a mountain stream in changing light The camera is on the tripod and the adapter ring is on the lens. You compose without a filter, focus on the rock in the foreground and snap on the ND 1.8. At f/11 and ISO 100 you end up at one to two seconds: the water turns soft but keeps its texture. When the sun comes out from behind a cloud, you swap to a stronger filter in a second or take it off altogether. What you should know before ordering The adapter ring is not included The filter has no screw thread and cannot be mounted directly on a lens. You need either the Haida magnetic adapter ring in 67mm or a magnetic step-up ring to 67mm. If you already own a Haida magnetic filter with ring, you have everything you need. The magnet holds, but not against hard knocks In normal use the filter sits securely. A solid bump against the lens can dislodge it, though. Keep that in mind over water, on a bridge or in a crowd. 6 stops are not enough for every long exposure For exposures of half a minute or more in bright daylight this filter is too weak. That is a job for the magnetic 10-stop ND filter. The two can be stacked, but with every extra filter the risk of darkened corners on wide-angle lenses increases. Technical details at a glance Manufacturer: Haida Series: NanoPro Magnetic Item number: HD4825-67 Filter type: neutral density filter, magnetic Density: ND 1.8 (64x) Light reduction: 6 stops Diameter: 67mm Glass thickness: 0.8mm Material: optical glass Coating: NanoPro, scratch resistant, water and oil repellent Mount: magnetic, on Haida magnetic adapter ring (not included) What's in the box 1 x Haida NanoPro Magnetic ND 1.8 (64x) filter, 67mm Magnetic adapter ring not included

Less stray light, more contrast: the Haida HD4907 is the dedicated magnetic lens hood for the Haida X in 1 filter system. It attaches magnetically to the front of the filter body, shields light coming in from the side and reduces flare and stray light in backlit scenes – on and off in seconds, with no threads.

Polfilter und variabler Graufilter in einem – und dazu magnetisch erweiterbar: Der Haida X in 1 in 95 mm vereint einen Zirkularpolfilter mit einem variablen ND von 1 bis 5 Blendenstufen in einem einzigen Filterkörper. Über den magnetischen Enhancer-Filter erweiterst du den Bereich bei Bedarf auf bis zu 7 Blenden. So steuerst du Belichtung, Spiegelungen und Sättigung mit einem Griff – vom frühen Morgen bis zum hellen Mittagslicht.

Haida NanoPro Magnetic C-POL Filter without Adapter Ring You can usually eliminate reflections on water, glass, or paint during post-processing—but with Haida’s magnetic NanoPro C-POL filter, you can do it right while you’re taking the photo. Thanks to the magnetic system, the circular polarizing filter attaches to the lens in seconds, without any screws.

Magnetic ND filter, 6 stops, 67 mm, from Haida The Haida magnetic system is easy to use. With this system, the filter is held magnetically on the lens. Screwing it on and off is no longer necessary. Changing filters has never been easier.The ND glass filter has a thickness of 0.8 mm. The ultra-flat design allows multiple filters to be used without the risk of vignetting. This gray filter has a neutral density of ND 1.8, which corresponds to an extension factor of 64 or 6 f-stops. Such filters are also known as Littel stoppers. It is very easy to switch between the different filters or stack them, depending on what you need when taking photos. Between shots, you can attach the optional magnetic lens cap while the magnetic adapter is still mounted to protect your filters or lens. Scratch-resistant and hydrophobic coatings on the glass surfaces protect the filters from wear and tear and provide an improved beading effect when in contact with water or oil. This makes cleaning easier. All in all, this new magnetic system is well thought out and will give you a lot of pleasure when taking photos thanks to its ease of use. All the advantages of the ND filter at a glance: Magnetic attachment Easy to change and stack filters Lightweight, flat filters Filters can be stacked without vignetting Thinner glass Compact to transport Scope of delivery 1x NanoPro magnetic filter ND 1.8 (600x), 67 mm1x magnetic adapter ring, 67 mm1x filter bag

Haida Magnetic Filters for Smartphone Holders – X-Star, Blue Streak & Golden Streak The Haida Magnetic Filters for Smartphone Holders enhance your smartphone photography with creative, professional-grade lighting effects. The set consists of three high-quality effect filters – X-Star, Blue Streak and Golden Streak – enabling you to create impressive starbursts and cinematic streaks of light directly with your smartphone. The filters attach magnetically to the compatible smartphone holder and can be changed in a flash. Thanks to precise glass processing and high-quality coating, they ensure clear images without any loss of quality. Ideal for night shots, portraits, street photography, or creative videos. The magnetic attachment guarantees a secure hold and easy handling – perfect for spontaneous shots on the go. The filters are specially optimized for use with smartphones and deliver effects that are otherwise only known from professional photography. Special features and advantages Magnetic quick-change system for efficient working Creative light and star effects without post-processing Compact, lightweight, and ideal for travel High-quality optical glass for better image quality Perfect for taking photos and videos with your smartphone Compatibility Compatible with Haida smartphone holders Suitable for smartphones with single or multiple cameras Technical Details Filter type: Effect filter (X-Star, Blue Streak, Golden Streak) Material: Optical glass, aluminum frame Attachment: Magnetic Weight: approx. 15 g per filter Scope of delivery 1x Haida X-Star filter 1x Haida Blue Streak filter 1x Haida Golden Streak filter

Haida MagSafe Magnetic Filter Set for Smartphones – Creative Photography Made Easy Discover a whole new level of freedom in mobile photography with the Haida MagSafe Magnetic Filter Set. The innovative magnetic filters can be easily attached to your smartphone and expand your creative potential – ideal for impressive landscape, architectural, or portrait shots. The Haida MagSafe Magnetic Filter Set consists of high-quality, optically precise magnetic filters that simply clip onto your smartphone. Thanks to MagSafe compatibility, each filter sits securely and stably without interfering with the camera. The filters are made of durable glass, offer high color neutrality, and protect your lens from dust and scratches. Special features and advantages With this set, you can respond directly and flexibly to different lighting situations. Whether ND filters for long exposures or CPL filters for reducing reflections, the Haida MagSafe set gives you creative control. Compared to conventional smartphone filters, handling is much easier and faster, as no cumbersome holder system is required. Quick attachment with MagSafe magnets High-quality optical glass for clear, color-accurate images Lightweight, compact design, ideal for on the go Easy combination of different filters for creative effects Compatibility All smartphone models with MagSafe support Tested on iPhone 17/16/15 Technical details Material: High-quality optical glass + aluminum frame Weight: approx. 50 g (complete set) Filter types: ND, CPL Protective function: Scratch-resistant, dust-resistant Scope of delivery 1x Haida MagSafe ND filter 1x Haida MagSafe CPL filter 1x Haida MagSafe holder 1x storage bag

ND filter magnetic 6 stops from Haida The Haida magnetic system is an easy-to-use system. With this system, the filter is held magnetically on the lens. Unscrewing and screwing on is no longer necessary. Filter changing has never been so easy. The ND glass filter has a thickness of 0.8 mm. The ultra-flat design allows the use of several filters without the risk of vignetting. This neutral density filter has a neutral density of ND 1.8, which corresponds to an extension factor of 64 or 6 f-stops. Such filters are also referred to as Littel stoppers.

Magnetic adapter ring 82mm - 95mm Magnetic adapter ring for Haida Nano Pro Magnetic Kits. Allows the use of 82 mm filters on 95 mm threads. Attention: This is not a normal step-up ring. The magnetic adapter ring is exclusively for the Haida Nano Pro Magnetic Kits. Scope of delivery: Haida Magnetic Step Up Adapter Ring 82mm - 95mm  

Magnetic adapter ring 77mm - 95mm Magnetic adapter ring for Haida Nano Pro Magnetic Kits. Allows the use of 77mm filters on 95mm thread. Attention: This is not a normal step up ring. The Magnetic Adapter Ring is exclusively for the Haida Nano Pro Magnetic Kits. Scope of delivery: Haida Magnetic Step Up Adapter Ring 77mm - 95mm  

Haida NanoPro Mist Black 1/4 filter 82 mm without adapter ring The Haida NanoPro MC Mist Black Filter 1/4 helps to reduce the value of highlights while slightly reducing the overall contrast. This filter is particularly useful for smoothing and softening facial wrinkles and other imperfections. Although this filter was developed for use in films, it can also be used in the fashion and cosmetics industry. Unlike traditional diffusion or soft focus filters, Pro-Mist filters offer minimal loss of detail throughout the image. The 1/4 density offers more contrast and light reduction than the 1/8 density, while still providing a soft, pastel-like quality of light.The advantages at a glance: Compared to conventional diffusion and blur filters, Mist Black filters offer a slight loss of detail in the imageParticularly suitable for smoothing and removing facial wrinkles and other blemishesNo color castNano coatingThin filter ring made of aluminum alloy prevents vignetting For technicians:  Filter type: DiffusionFilter factor 1.7x (0.8-stop)Filter thread: magnetic 82 mm  (suitable adapter ring can be found below)Filter material: glassHaida number: HD4794Scope of delivery 1 x Haida NanoPro MC Mist Black Filter 1/4 magnetic 82 mm (without adapter ring) 1 x transport box with foam insert

Magnetic lens cap in various sizes from HaidaThe magnetic lens cap from Haida makes it very easy to protect your lens. It is simply attached to the corresponding adapter on the lens. As it is magnetic, there is no need for tedious screwing or fixing.

Magnetic back cover  These back covers are available so that the magnetic filters are also protected on the back during transport. This is simply attached and then holds magnetically to the filter and the filter glass is protected on both sides.

Lens filter set magnetic from Haida The magnetic CPL filter is made of ultra-flat glass with a thickness of 1.2 mm. The glass ND filter has a thickness of 0.8 mm. The ultra-flat design allows the use of multiple filters without the risk of vignetting It is very easy to switch between the different filters or stack them depending on what you need when taking pictures.

ND filter grey filter magnetic 10 f-stops from Haida The glass ND filter has a thickness of 0.8 mm. The ultra-flat design allows the use of multiple filters without the risk of vignetting. This grey filter has a neutral density of ND 3.0, which corresponds to a 1000-fold reduction factor or 10 f-stops. Such filters are also called big stoppers.

Magnetic polarising filter The magnetic CPL filter is made of ultra-flat glass with a thickness of 1.2 mm. It improves your shots with little effort by eliminating reflections on non-metallic surfaces such as glass, water, paint or plastic. Polarising filter shots of car or shop windows provide an unobstructed view of the driver or shop window. Ponds, lakes or the sea become "transparent" as if by magic. Stones, rocks or fish emerge clearly and distinctly, ships seem to float over the water.

Magnetic grey filter ND0.9   The Haida ND 0.9 magnetic grey filter is one of the fainter grey filters and fits on lenses with a corresponding adapter ring. The grey filter is uniformly grey (neutral) and reduces the amount of light entering the lens. The resulting reduction in exposure time by a factor of 8 (3 f-stops) enables a lower f-number for video filming and photography.

Magnetic Ultra Slim GND graduated filter ND 0.9 The NanoPro Magnetic Soft Graduated ND8 filter is designed to be attached to a separately available Haida magnetic adapter ring. When you screw the optional ring onto your lens, the graduated filter is magnetically attached to the ring and offers an exposure reduction of 3 f-stops with soft edges. The glass filter is provided with a topcoat coating.

Haida magnetic step-up ring from 55 mm to 82 mm This step-up ring from Haide makes it possible to use a magnetic Haida filter with a diameter of 82 mm on a lens with a filter thread of 55 mm.Attention: This is not a normal step up ring. The Magnetic Adapter Ring is to be used exclusively for the Haida Nano Pro magnetic filters.Scope of delivery: 1x magnetic step-up ring from 55 mm to 82 mm

Haida magnetic adapter ring single Adapter ring for the Haida NanoPro Magnetic Kits, as a replacement or supplement

Protect your lens with a magnetic protective filter from HaidaIn the world of photography, choosing the right accessories is crucial for first-class images. It is often forgotten that the equipment also needs to be protected. Especially the lens, which is the most exposed.

Magnetic adapter ring 72mm - 82mmMagnetic adapter ring for Haida Nano Pro Magnetic Kits. Allows the use of  82 mm filters on 72 mm thread.Attention: This is not a normal Step Up Ring. This magnetic adapter ring is exclusively for the Haida Nano Pro Magnetic Kits.Scope of delivery:Haida Magnetic Step Up Adapter Ring 72mm-82mm