Panoramic photography

Gigapan Cable Micro USB to Sony S2 Micro 10-pin connector   Replacement cable for Sony With the release cable Sony cameras are connected to the GigaPan EPIC Pro panorama head. length = 30cm Compatibility A7, A7 II, A7R, A7R II, A7 III, A7IV, A7R III, A7RIV, A7S, A7S II, A7M2K A9, A9II, A58, A3000, A3500, A5000, A5100 A6000, A6100, A6300, A6400, A6500, A6600 ILCA-68, 77M2, 99M2, ILCE-QX1 HX50, HX50V, HX60, HX60V, HX80, HX90, HX90V, HX300, HX350, HX400, HX400V NEX-3NL, QX30 RX1R II, RX10, RX10 II, RX10 III, RX100II, RX100III, RX100M4, RX100M5 WX500, RX100M6   Scope of delivery1x GigaPan cable like Sony MULTI Connector for EPIC Pro pan head

Canon E3 cable like Canon RS-60E3   Replacement or extension cable for Canon EOS With the release cable Canon EOS cameras are connected to the GigaPan EPIC Pro panorama head. The cable serves as a replacement or extension cable.   Length = ca.30cm   CompatibilityCanon EOS 1300D, 1200D, 1100D, 1000D, 800D, 760D, 750D, 700D, 650D, 600D, 550D, 500D, 450D, 400D, 350D, 300D, 100D, 80D, 77D, 70D, 60D etc.Canon EOS M6, M5Canon Powershot G5 X, G3 X, G1 X Mark II, G1 X (not Bulb), G16, G15, G12, G11, G10, SX60 HS, SX50 HS Pentax K-500, K-50 IIs, K-50 II, K-50, K-30, K-7, K-5, K-3 II, K-3, K-1, K-S1, K200D, K20D, K110D, K100D, K10D, isD, isDs, isDL, MZ-6, ZX-L, MZ-L Samsung GX-20, GX-10, GX-1L, GX-1S   Scope of delivery1x GigaPan Canon EOS cable E3 for EPIC Pro panorama head

SmallRig Rotatable Horizontal-to-Vertical Mount Plate Kit for Nikon Z The SmallRig 4306 is a rotating mounting plate specially designed for Nikon Z-series cameras. It allows seamless switching between horizontal and vertical orientation, significantly increasing the versatility and creative possibilities when shooting and filming. Here are some of the most important features of the SmallRig 4306: Rugged construction:Our kit is made of high-quality aluminum, which makes it extremely durable and lightweight. So you can work worry-free without putting any strain on the equipment. Rotatable mounting plate: The mounting plate can be rotated by 90 degrees so that you can easily switch between horizontal and vertical orientation. This gives you even more flexibility for your shots. Compatibility: The SmallRig 4306 was specially developed for Nikon Z cameras and fits perfectly with these models. Additional threaded holes: This kit features multiple 1/4 inch and 3/8 inch threaded holes that allow for easy attachment of accessories such as monitors, microphones and lights. Improved ergonomics: The ability to switch between horizontal and vertical orientation improves ergonomics and allows you to work more comfortably. So you can concentrate fully on your creativity. Fast assembly: The assembly of our kit is very simple and requires no special skills. You can get started right away. The SmallRig 4306 is a great addition for you, whether you are a photographer or a filmmaker. It offers you flexibility and functionality in a high-quality design. And in case you're wondering: Technical data Product dimensions: 132 x 104 x 83 mmProduct weight: 230gMaterial(s): aluminum alloy, stainless steel The SmallRig 4306 rotating mounting plate fits the following cameras:  Nikon Z 5  Nikon Z 6  Nikon Z 7  Nikon Z 6II  Nikon Z 7II Nikon Z 8  Scope of delivery: 1 x horizontal-vertical swivel mounting plate1 x connecting plate1 x Arca-Swiss quick-release plate & Arca-Swiss base plate1 x Allen key   Typical questions related to this product: How heavy is the SmallRig 4306? The kit is 230 grams light and has only a small influence on the total weight of the camera equipment. Is the setup of the SmallRig 4306 complicated? No, the setup is simple and requires no special skills. Note on the use and compatibility of the SmallRig 4306 rotatable mounting plate Please remove the lens before mounting/dismounting.This product is compatible with the Nikon FTZ II Mount Adapter. This product is only compatible with the following lenses: Nikon NIKKOR Z 24-70 mm f/2.8Nikon NIKKOR Z 50 mm f/1.2Nikon NIKKOR Z 24-120 mm f/4Nikon NIKKOR Z 14-24 mm f/2.8Nikon NIKKOR Z 85 mm f/1.8Nikon NIKKOR Z 24-70 mm f/4Nikon NIKKOR Z 14-30 mm f/4Nikon NIKKOR Z 24-200 mm f/4-6.3  

Greater precision for macro and panoramic photography: The Sunwayfoto DPG-2416R multi-purpose rail provides a versatile solution for accurately positioning your camera. Its 240 mm length and double dovetail profile make it compatible with Arca-Swiss-style quick-release clamps and compatible Really Right Stuff clamps. Laser-engraved scales on both sides help you set positions accurately and reproduce them later. Whether you are shooting panoramas, working in macro photography or adjusting your camera setup, this versatile rail supports precise positioning. 240 mm multi-purpose rail with a double dovetail profile Arca-Swiss compatible, including compatible Really Right Stuff clamps Laser-engraved scales on both sides for accurate positioning Suitable for panoramic, macro and close-up photography Multiple mounting positions and practical safety-stop holes Made from lightweight CNC-machined aluminium Precise positioning for demanding photography Ideal for panoramic photography Accurate camera positioning is essential for panoramic photography. The Sunwayfoto DPG-2416R allows you to position the camera so that the rotation axis aligns as closely as possible with the desired nodal point or the relevant entrance-pupil area of the lens. This helps reduce parallax errors when stitching multiple images together and creating seamless panoramas. Flexibility for macro and close-up photography Precise camera positioning is also important in macro and close-up photography. The rail allows you to move the camera along the mounting axis, making it easier to adjust the composition without repeatedly repositioning the tripod. This is particularly useful for demanding close-up work and for setting up repeatable camera configurations. Double dovetail profile for versatile mounting Compatible with Arca-Swiss and Really Right Stuff The double dovetail profile supports use with compatible Arca-Swiss-style quick-release clamps and Really Right Stuff clamps, including compatible lever-release clamps. This allows the rail to be integrated into many existing tripod and camera systems. Before use, check that your clamp matches the rail profile and dimensions. Scales for repeatable positioning Laser-engraved scales on both sides make it easier to adjust the camera position accurately. You can record settings and reproduce them for subsequent shoots. A movable stop bar helps position the camera consistently and makes it easier to recreate the same setup. Durable construction for everyday photography CNC-machined aluminium The Sunwayfoto DPG-2416R is manufactured from lightweight aluminium using CNC machining. Its anodized surface finish improves resistance to abrasion and corrosion. Measuring 240 mm in length and weighing only 194 g, the rail combines a compact design with versatile mounting options. Additional mounting and safety features The rail offers multiple mounting positions and a UNC 1/4-inch thread. Integrated safety-stop mounting holes help prevent accidental sliding out of compatible quick-release clamps. An additional opening allows you to attach a carrying strap or wrist strap. What to know before ordering Check compatibility The DPG-2416R works with Arca-Swiss-compatible quick-release clamps and compatible Really Right Stuff clamps. Camera and accessory mounting also depends on the relevant threads and mounting points. Check compatibility with your existing tripod head and accessories before ordering. Rail supplied without additional holders The scope of delivery includes the Sunwayfoto DPG-2416R multi-purpose rail. A camera, tripod head and other pictured accessories are not included unless explicitly listed separately. Technical details at a glance Product type: Multi-purpose rail / quick-release and positioning rail Brand: Sunwayfoto Model: DPG-2416R Length: 240 mm Width: 39 mm Thickness: 16 mm Weight: 194 g Material: CNC-machined aluminium Surface finish: Anodized Profile: Double dovetail Compatibility: Arca-Swiss and compatible Really Right Stuff quick-release clamps Mounting thread: UNC 1/4 inch Groove lengths: 64 mm / 76.5 mm Scale: Laser-engraved on both sides Features: Movable stop bar, safety-stop mounting holes and strap attachment opening Product number: 24A-DPG-2416R Scope of delivery 1 x Sunwayfoto DPG-2416R multi-purpose rail, 240 mm

Precise positioning for demanding photography: The Sunwayfoto DPG-3016R Multi-Purpose Rail is a versatile 300 mm quick-release rail designed for panoramic, macro and stereo photography. Its double-dovetail profile is compatible with Arca-Swiss and Really Right Stuff quick-release clamps. Laser-engraved scales on both sides help you make accurate adjustments, while multiple mounting holes provide flexible attachment options. Made from lightweight, CNC-machined aluminium, this rail is a versatile tool for precise camera positioning. 300 mm multi-purpose rail with a double-dovetail profile Compatible with Arca-Swiss and Really Right Stuff quick-release clamps, including compatible lever clamps Easy-to-read laser-engraved scales on both sides for precise adjustments 12 M3 mounting holes for flexible attachment of accessories and movable stop bars Integrated mounting options for safety stops and camera straps CNC-machined aluminium with an anodised surface finish Versatile rail for precise camera positioning Ideal for panoramic photography Accurate camera positioning is essential in panoramic photography. The DPG-3016R allows you to position the camera or lens so that the axis of rotation can be aligned as closely as possible with the required nodal point. This helps reduce parallax errors and improves the conditions for creating seamlessly stitched panoramas. Greater adjustment range for macro photography The 300 mm rail is also useful for macro photography. It provides a generous front-to-back adjustment range, allowing you to reposition the camera without having to move the tripod every time. This makes it easier to fine-tune the composition and subject position, especially for close-up work and precise reproduction photography. Double-dovetail profile for flexible mounting Compatible with Arca-Swiss and RRS clamps The double-dovetail profile allows the rail to be used with compatible Arca-Swiss quick-release clamps and Really Right Stuff (RRS) clamps. This makes it easy to integrate the rail into existing tripod and quick-release systems. Check clamp compatibility before use, particularly with specialised lever clamps. Scales for repeatable positioning Clearly visible laser-engraved scales are provided on both sides. They help you accurately set the position of the camera or lens and reproduce the same setup for subsequent shoots. This is especially useful for panoramic photography, macro series and stereoscopic setups where repeatable positioning matters. Practical details for everyday photography Flexible mounting options The twelve M3 mounting holes provide options for attaching accessories and a movable stop bar. This allows you to define the camera position precisely and reproduce it when needed. Additional holes on the underside are designed for safety-stop screws. A separate strap mounting hole also allows you to attach a strap or wrist strap. Lightweight and durable aluminium The rail is manufactured from lightweight aluminium using CNC machining. Its anodised surface finish improves resistance to abrasion and corrosion. With a length of 300 mm, it offers a generous adjustment range while remaining practical for studio and location work. What to know before ordering Check compatibility The DPG-3016R is designed for compatible Arca-Swiss and RRS quick-release clamps. A 1/4"-20 threaded connection is available for mounting a camera or compatible accessory directly. Before use, check that your clamp and mounting screws are suitable for your setup. Safety stops The rail features mounting holes for safety stops. Sunwayfoto offers compatible safety-stop screws. Check the supplied contents if you intend to use these stops straight away. Technical details at a glance Product type: Multi-purpose rail Brand: Sunwayfoto Model: DPG-3016R Length: 300 mm Width: 39 mm Thickness: 16 mm Weight: approx. 304 g Material: CNC-machined aircraft-grade aluminium Surface finish: Anodised Profile: Double dovetail Compatibility: Arca-Swiss and Really Right Stuff quick-release clamps, including compatible lever clamps Thread: 1/4"-20 Groove length: 88 mm / 88 mm Mounting holes: 12 x M3 Scale: Laser-engraved on both sides Additional features: Mounting options for safety stops and a strap Product number: 24A-DPG-3016R Scope of delivery 1 x Sunwayfoto Multi-Purpose Rail DPG-3016R, 300 mm

Greater flexibility when positioning your camera: The Sunwayfoto DPG-210R multi-purpose rail allows you to align your camera and lens precisely on a tripod system. Its Arca-Swiss-compatible dovetail profile fits compatible quick-release clamps and allows flexible positioning. It is particularly useful for panoramic photography, macro work and balancing heavier lenses. Multi-purpose rail with Arca-Swiss-compatible dovetail profile Laser-engraved scales on both sides for precise positioning Movable stop bar for repeatable camera alignment Ideal for panoramic, macro and telephoto photography Strap mounting hole for a camera or wrist strap Made from lightweight, CNC-machined aluminium Precise positioning for demanding photography Ideal for panoramic photography In panoramic photography, correct camera positioning is essential for joining multiple images as seamlessly as possible. The Sunwayfoto DPG-210R allows you to slide the camera along the rail and align the rotation point with the desired nodal point of the lens. The scales on both sides help you set the position accurately and reproduce it for future shoots. More flexibility for macro photography The rail is also useful for macro photography. Its sliding adjustment lets you fine-tune the camera position and composition without constantly repositioning the entire tripod. This makes precise alignment easier for close-up work and demanding camera setups. Practical features for everyday photography Dual scales and movable stop bar The laser-engraved scales on both sides make accurate positioning easier. A movable stop bar helps you align the camera consistently. This is particularly useful when repeating the same setup or when reproducible results are important. Arca-Swiss-compatible quick-release profile The dovetail profile is compatible with Arca-Swiss quick-release clamps and compatible RRS systems. This makes it easy to integrate the rail into many existing tripod setups. The 1/4"-20 mounting screw allows compatible cameras, plates or accessories to be attached. Lightweight and durable aluminium The Sunwayfoto DPG-210R is CNC-machined from lightweight aluminium. Its anodized finish improves resistance to abrasion and corrosion. Thanks to its compact profile, the rail is suitable for both studio use and photography on location. What to know before ordering Check compatibility The rail is designed for Arca-Swiss-compatible quick-release clamps. Before ordering, check that your tripod head or clamp supports the corresponding dovetail profile. Your camera or accessory must also have a suitable 1/4"-20 thread or compatible mounting arrangement. Using the rail for nodal-point positioning The rail allows you to slide the camera to adjust the desired rotation point. For precise panoramic photography, the correct position must be determined for the camera and lens combination in use. The required setting may vary depending on the lens and focal length. Technical details at a glance Brand: Sunwayfoto Model: DPG-210R Product type: Multi-purpose and nodal rail Material: CNC-machined aluminium Finish: Anodized Length according to manufacturer: 200 mm Width: 39 mm Height: 10 mm Weight: Approx. 132 g Mounting screw: 1/4"-20 Mounting thread: 1/4"-20 Groove lengths: 43 mm / 56 mm Quick-release profile: Arca-Swiss-compatible dovetail Compatibility: Arca-Swiss and compatible RRS quick-release clamps Features: Dual scales, movable stop bar, strap mounting hole Scope of delivery 1 x Sunwayfoto DPG-210R multi-purpose rail

Precise positioning for demanding photography: The Sunwayfoto DMP-140R Nodal Slide is a versatile adjustment rail for panoramic and macro photography. With a plate length of 140 mm and an Arca-Swiss-compatible screw-knob clamp, it allows you to position your camera flexibly on a tripod. For panoramic photography, the rail helps you find the correct nodal point of your lens. For macro photography, you can adjust the camera-to-subject distance without repositioning the tripod. Versatile nodal and adjustment rail for panoramic and macro photography 140 mm plate length and 165 mm overall length Arca-Swiss-compatible screw-knob clamp with a 39 mm width 1/4"-20 threaded mounting connection for compatible tripods and accessories CNC-machined aluminium with a black anodised finish Safety stop relief grooves and mounting points for safety stop screws Precise adjustments for panoramic photography Find the correct nodal point The correct camera position is essential for high-quality panoramic images. The Sunwayfoto DMP-140R allows you to slide the camera along the rail to find the optimal rotation point for your lens. Precise positioning helps reduce parallax errors, particularly when objects are close to the camera. This is especially useful for landscape, architectural and interior photography, where multiple images are combined into a panorama. Flexible positioning with the screw-knob clamp The integrated screw-knob clamp allows compatible quick-release plates to be secured and released. This makes it possible to position and lock the camera assembly in a controlled manner. The 39 mm Arca-Swiss-compatible system makes integration with existing tripod and quick-release systems easier. Greater flexibility for macro photography Fine adjustments without moving the tripod Precise camera positioning is also important for close-up and macro photography. The DMP-140R allows you to move the camera forwards or backwards along the rail without moving the entire tripod. This makes it easier to adjust framing and the distance to your subject. Durable aluminium construction The rail is CNC-machined from a lightweight aluminium alloy. Its black anodised finish helps protect the surface against wear and corrosion. Safety stop relief grooves and designated mounting points for safety stop screws support secure use with compatible quick-release clamps. What to know before ordering Check compatibility The DMP-140R is designed for Arca-Swiss-compatible quick-release clamps and matching 39 mm plates. Before use, check whether your existing tripod plate or quick-release clamp is compatible with this system. Check the tripod connection The rail features a 1/4"-20 threaded mounting connection. Check whether your tripod head or accessory provides the appropriate connection or requires an adapter. Technical details at a glance Product type: Nodal slide / adjustment rail Brand: Sunwayfoto Model: DMP-140R Plate length: 140 mm Overall length: 165 mm Width: 39 mm Height: 10 mm Clamping mechanism: Screw knob Compatibility: Arca-Swiss system, 39 mm Tripod connection: 1/4"-20 thread Material: CNC-machined aluminium Finish: Black anodised Safety features: Safety stop relief grooves and mounting points for safety stop screws Weight: Approx. 100 g according to the manufacturer Product number: 24A-DMP-140 Scope of delivery 1 x Sunwayfoto DMP-140R Nodal Slide with screw-knob clamp

Leveling head to camera tripodIn some moments it is often only a few millimeters to get a straight image. A leveling head is the ideal solution for the exact alignment of video heads, gimbals and panorama heads or even measuring devices. If the tripod is not level due to the surface conditions, this can be easily compensated with the leveling head. The annoying adjustment of the tripod legs is no longer necessary with this product. The base can be tilted by up to 5° in any direction. The advantages of this leveling head at a glance:Precise alignment of the horizontal planeBuilt-in leveling bubbleClamping lever to lock the inclinationFor technicians:Inclination: 5° on all sidesHeight: 46 mmCamera plate diameter: 67 mmConnection camera plate: 3/8 inch screwDiameter base plate: 67 mmConnection base plate: 3/8 inch threadWeight: 210gMax. Load: 15KgCompatibilityTripods with 3/8 inch connectionTripod heads with 3/8 inch connectionScope of delivery: 1x PL-64 leveling head

Panorama Index Rotator IRC-64 from Sunwayfoto – Precise panorama panning made easy The Panorama Index Rotator IRC-64 from Sunwayfoto is your ideal companion for impressive panoramic shots. With its precise control, it enables smooth and accurate rotations so you can create seamless panoramic images – ideal for landscape, architectural, or product photography. The IRC-64 impresses with its high-quality aluminum construction, which combines stability with lightness. Thanks to its modular design, the rotator can be flexibly mounted on various tripod systems and cameras. The finely graduated 64 index points allow for precise swivel angles and ensure perfect image series that can be easily assembled. Its simple operation makes it suitable for both beginners and professionals. Special features and advantages High-quality aluminum alloy for long-lasting use 64 index points for precise tilt angles Compatible with common quick-release plates and ball heads Lightweight, compact design for on the go The IRC-64 stands out from other panorama rotators thanks to its robustness and accuracy. You benefit from secure camera mounting that minimizes vibrations and guarantees blur-free images. Ideal for time-lapse photography or panoramas with multiple rows. The device is low-maintenance and impresses with its intuitive handling without complicated electronics. Compatibility DSLR and mirrorless cameras from Canon, Nikon, Sony, and Fujifilm Compatible with Arca-Swiss quick-release plates Fits standard tripod heads and panorama systems Technical details Material: High-quality aluminum alloy Weight: approx. 189 g Dimensions: 64 x 27 mm Max. load capacity: 20 kg Connections: Standard 1/4“ and 3/8” screws Scope of delivery 1x Sunwayfoto Panorama Index Rotator IRC-64

Millimetre-precise positioning: The Sunwayfoto DMP-200R Nodal Slide lets you position your camera exactly where you need it for demanding panoramic and macro photography. Its 200 mm overall length provides flexible camera adjustment and helps you accurately determine the nodal point of your lens. With laser-engraved scales on both sides, a robust aluminium construction and an Arca-Swiss-compatible clamp, it is a versatile tool for professional photography. 200 mm overall length with 150 mm of adjustment travel Ideal for finding the nodal point for panoramic photography Precise front-to-back positioning for macro photography Laser-engraved scales on both sides for repeatable adjustments Arca-Swiss-compatible clamp with screw knob Robust aluminium construction with a hard-anodised finish Safety stop screws help prevent accidental sliding out of the clamp Precise positioning for panoramic photography Accurately set the nodal point In panoramic photography, correct camera positioning is essential for reducing parallax errors when stitching individual images together. The Sunwayfoto DMP-200R lets you move the camera along the rail to find the optimal rotation point for your lens. Laser-engraved scales on both sides make precise adjustment easier and help you reproduce previously established positions. Greater control for macro photography Precise camera positioning is also important in macro photography. The Nodal Slide lets you move the camera forwards or backwards without having to reposition the entire tripod. This makes fine-tuning your composition easier and supports work with small subjects and short focusing distances. Robust construction for everyday photography Durable aluminium construction The Sunwayfoto DMP-200R is made of aluminium and designed for regular photographic use. Its hard-anodised finish helps protect the rail against everyday knocks and scratches. Weighing approximately 193 g, it remains easy to transport and is suitable for both studio work and photography on location. Arca-Swiss-compatible clamp with screw knob The integrated quick-release clamp is compatible with the Arca-Swiss system. The screw knob allows controlled tightening and loosening of the clamp. This makes it possible to integrate the rail into compatible Arca-Swiss setups. Before use, check compatibility with your existing quick-release plate and tripod head. Additional security with stop screws Integrated safety stop screws help prevent the rail from accidentally sliding out of a compatible clamp. An additional strap slot allows you to attach a camera strap, providing another practical option when working with your camera equipment. What to know before ordering Check compatibility The rail is designed for use with an Arca-Swiss-compatible quick-release system. Check whether your tripod head or quick-release clamp supports the required profile. Actual compatibility depends on the components used. Choose the right length With an overall length of 200 mm and 150 mm of adjustment travel, the DMP-200R offers flexibility for many panoramic and macro applications. Before ordering, consider how much adjustment travel you need for your camera and lens combination. Technical details at a glance Product type: Nodal slide / adjustment rail Brand: Sunwayfoto Model: DMP-200R Overall length: 200 mm Adjustment travel: 150 mm Width: 39 mm Weight: approx. 193 g Material: Aluminium Colour: Black Scale: Laser-engraved on both sides Clamp: Arca-Swiss-compatible, with screw knob Safety features: Integrated stop screws Additional feature: Strap slot for attaching a camera strap Product number: 24A-DMP-200 Scope of delivery 1 x Sunwayfoto DMP-200R Nodal Slide with screw knob

GigaPan Nikon Auslösekabel E3 für EPIC Pro   The release cable connects Nikon cameras with the GigaPan EPIC Pro panorama head.length = 30cm   CompatibilityNikon D850, D810A, D810, D800, D800E, D700, D500, D300, D300s, D200, D100 (battery handle required), D5, D4S, D4, D3S, D3X, D3, D2X, D2Xs, D2H, D2Hs, D1X, D1H, D1, Nikon F6, F5, F90X, F100, MC-30 Fuji S3 Pro, S5 Pro, Kodak DCS Pro   Scope of delivery1x GigaPan Nikon cable 10-pin for EPIC Pro pan head

GigaPan Battery Holder for EPIC and EPIC 100 The GigaPan battery holder is the perfect solution if you need a replacement or additional battery holder for your GigaPan EPIC or EPIC 100 robotic camera mount. The holder accommodates six AA batteries and enables operation of the automated panorama camera mount. Who it’s for The battery holder is suitable for anyone who wants to equip a GigaPan EPIC or EPIC 100 robotic camera mount with a replacement or additional battery holder. It is especially handy when an existing battery holder needs to be replaced or an additional holder is required. Benefits at a Glance Compatible with GigaPan EPIC and EPIC 100 Holds six AA batteries Suitable as a replacement or additional battery holder Two clips ensure a secure hold in the battery compartment Easy to remove by squeezing the clips NiMH or lithium-ion batteries are recommended What makes this product special The GigaPan battery holder is specifically designed for use with the GigaPan EPIC and EPIC 100 robotic camera mounts. The two clips snap into place when inserted into the battery compartment and hold the battery holder securely in position. To remove it, simply squeeze the clips together. Compatibility The GigaPan battery holder is compatible with the GigaPan EPIC and EPIC 100 models. Technical Details The battery holder accommodates six AA batteries. NiMH or lithium-ion batteries are recommended for use. Package Contents 1x GigaPan Battery Holder for EPIC and EPIC 100 Conclusion With the GigaPan battery holder, you get a compatible replacement or additional holder for the GigaPan EPIC and EPIC 100 robotic camera mounts. It holds six AA batteries and, thanks to its snap-in clips, can be securely inserted and easily removed.  

Camera gimbal tripod head – precision and stability for your shots The camera gimbal tripod head is the perfect solution if you want to take razor-sharp, shake-free pictures or videos. It combines precise mechanics with stable guidance and allows you to make smooth pans and controlled movements – ideal for photography and videography. This high-quality gimbal tripod head ensures that your camera always remains balanced. Its robust construction and ease of use allow you to effortlessly guide even heavy telephoto lenses or professional DSLR and system cameras. Thanks to the fine adjustment options, every pan is smooth and controlled. Perfect for landscape photography, sports shots, or wildlife observation. Special features and advantages Smooth 360° panning movement for precise panoramic shots Stabilization even with heavy camera equipment Quick-release plate for fast camera changes Ergonomic design for comfortable working Ideal for action and nature photographers who value flexibility Compared to conventional ball heads, the gimbal tripod head offers significantly more stability for large and heavy lenses. Compatibility Suitable for DSLR cameras, mirrorless system cameras, and video cameras Supports lenses with a focal length of up to 600 mm (depending on model) Technical details Material: High-quality aluminum alloy Load capacity: up to 15 kg Swivel range: 360° horizontally, -90° to +90° vertically Weight: approx. 1.4 kg Connection: Standard 1/4“ and 3/8” thread Scope of delivery Camera gimbal tripod head Quick-release plate

GigaPan Canon N3 cable   Replacement or extension cable for Canon EOS With the release cable Canon EOS cameras are connected to the GigaPan EPIC Pro panorama head. The cable serves as a replacement or extension cable. Length = ca.30cm   Compatibilitye.g. for Canon EOS 50D, 40D, 30D, 20D, 10D, 7D Mark II, 7D, 6D, 5DS, 5DS R, 5D Mark III, 5D Mark II, 5D, D30, D60Canon EOS 1D, 1Ds, 1D Mark II, 1Ds Mark II, 1D Mark II N, 1D Mark III, 1Ds Mark III, 1D Mark IV, EOS-1D X, EOS-1D C   Scope of delivery1x GigaPan Canon EOS cable N3 for EPIC Pro panorama head

Flexible mounting and convenient camera changes: The Sunwayfoto DDH-05 panoramic quick-release clamp allows you to move your camera easily between different tripods and compatible mounting systems. Featuring robust and precise construction, it is compatible with the 39 mm Arca-Swiss system and includes a UNC 3/8-inch threaded connection. It is a practical solution for photographers who want to use their camera equipment flexibly and switch quickly between different setups. Arca-Swiss-compatible quick-release clamp for the 39 mm system UNC 3/8-inch threaded connection Allows convenient camera changes between different tripods Robust and precise construction Compact design weighing only 135 g Flexibility for your camera equipment Quick changes between tripods If you use your camera on different tripods or compatible supports, the Sunwayfoto DDH-05 makes switching easier. With a suitable quick-release plate, you can attach your camera conveniently and remove it when needed. This is particularly useful when working in changing conditions or across different photographic setups. Compatible with the Arca-Swiss system The quick-release clamp is designed for the 39 mm Arca-Swiss system. It can therefore be used with compatible quick-release plates and accessories. Before purchasing, check the dimensions and compatibility of your existing plates. Robust construction for everyday photography Precise and compact design Sunwayfoto designed the DDH-05 with a focus on robust and precise construction. With a height of just 26 mm and a weight of 135 g, the clamp remains compact and can be integrated into a variety of tripod setups. It is suitable for photographers looking for a practical and flexible mounting solution. Versatile mounting options The UNC 3/8-inch connection allows mounting on compatible tripods or tripod heads. The underside is also compatible with the Arca-Swiss system, allowing the clamp to be integrated into a suitable quick-release setup depending on your existing equipment. What to know before ordering Check compatibility The Sunwayfoto DDH-05 is compatible with the 39 mm Arca-Swiss system and UNC 3/8-inch threaded connections. Before ordering, check that your quick-release plates, tripods and tripod heads have the required connections and dimensions. Compatible quick-release plate required A compatible quick-release plate is required to attach a camera. It is not listed as a separate item in the stated scope of delivery and must be purchased separately if needed. Technical details at a glance Product type: Panoramic quick-release clamp Brand: Sunwayfoto Model: DDH-05 Arca-Swiss compatibility: Yes, 39 mm Connection: UNC 3/8 inch Top diameter: 58 mm Bottom diameter: 57 mm Height: 26 mm Overall length: 100 mm Weight: 135 g Product number: 24A-DDH-05 Scope of delivery 1 x Sunwayfoto DDH-05 panoramic quick-release clamp

Precision for impressive panoramic photography: The Sunwayfoto DDH-06 is a compact panoramic panning clamp that allows you to rotate your camera through 360°. Its integrated Arca-Swiss-compatible quick-release clamp, precision scale and built-in bubble level help you align your camera accurately and capture consistent image sequences for high-quality panoramas. Thanks to its robust aluminium construction and a maximum load capacity of 20 kg, the DDH-06 is suitable for demanding photographic setups. 360° panoramic rotation for precise horizontal panning Arca-Swiss-compatible quick-release clamp with screw knob Laser-engraved scale and index markings for repeatable settings Integrated bubble level for accurate alignment Safety grooves help reduce the risk of the quick-release plate slipping out Durable T6061 aluminium body with hard-anodized finish Maximum load capacity: 20 kg Precise panoramic photography with 360° rotation Controlled panning for seamless image sequences Consistent, controlled rotation is essential for panoramic photography. The Sunwayfoto DDH-06 allows a full 360° rotation and helps you capture multiple images at defined angular intervals. Its laser-engraved scale and index markings make it easier to position the camera accurately for each exposure and repeat your settings. Useful with different focal lengths The scale helps you position and align your camera for different shooting situations. Used with a compatible quick-release plate, it allows controlled adjustment of your equipment. For technically demanding panoramas where the nodal point is important, the camera must be positioned correctly for the lens and focal length in use. Arca-Swiss-compatible quick-release clamp Quick and secure attachment The DDH-06 features an Arca-Swiss-compatible quick-release clamp operated by a screw knob. A compatible Arca-Swiss-style plate can be secured and released when needed. Integrated safety grooves help prevent the plate from accidentally slipping out while you adjust the setup. Flexible mounting on tripods and tripod heads The UNC 3/8-inch mounting thread on the underside allows the panning clamp to be attached to a compatible tripod or tripod head. Mounted directly on a suitable tripod, it functions as a compact panoramic base. With a compatible Arca-Swiss quick-release plate, it can also be used with compatible tripod heads. Durable construction for everyday photography Quality materials The main body is made from T6061 aluminium and precision CNC-machined. Its hard-anodized finish helps resist abrasion and corrosion. Stainless steel screws complement the durable construction, making the DDH-06 a reliable option for regular use in landscape, architectural and panoramic photography. Integrated bubble level for alignment The built-in circular bubble level helps you level the camera before shooting. Accurate alignment makes it easier to merge individual frames in post-production and supports consistent panoramic results. What to know before ordering Check compatibility The upper quick-release clamp is designed for an Arca-Swiss-compatible dovetail plate profile. Before ordering, check that your quick-release plate matches the required profile. A compatible UNC 3/8-inch connection is required for mounting on a tripod or tripod head. Quick-release plate not confirmed as included The DDH-06 features an integrated quick-release clamp. The available product information does not clearly confirm that a separate quick-release plate is included, so one should be purchased separately if required. Technical details at a glance Product type: Panoramic panning clamp / panoramic base Brand: Sunwayfoto Model: DDH-06 Quick-release clamp type: Arca-Swiss-compatible Operation: Screw knob Rotation: 360° Top base diameter: 52 mm Height: 16.7 mm (manufacturer specification) Mounting thread: UNC 3/8 inch Maximum load capacity: 20 kg Weight: approx. 82 g (manufacturer specification) Main body material: T6061 aluminium Screw material: S304 stainless steel Finish: Hard-anodized Features: Laser-engraved scale, index markings and integrated bubble level Product number: 24A-DDH-06 EAN: 6952512508281 Scope of delivery 1 x Sunwayfoto DDH-06 panoramic panning clamp

Arca Panorama Pan Head PC-58L from Sunwayfoto The Arca Panorama Pan Head PC-58L allows you to take professional panoramic shots with the highest precision. Whether you're shooting landscapes, architecture, or studio photography, this pan head ensures smooth and precise camera movements and boosts your creativity with every shoot. The PC-58L pan head from Sunwayfoto impresses with its high-quality aluminum and stainless steel construction. With its precise, stepless pan function and smooth-running mechanism, every shot can be aligned exactly. The head is compatible with all common Arca-Swiss systems, making it ideal for professional photographers and ambitious amateur photographers. The flexible adjustability in multiple axes is particularly practical. The scale markings allow for precise positioning so that you can seamlessly stitch your panoramic shots together. With a robust design and high load capacity of up to 15 kg, the PC-58L is perfect for heavy cameras and lenses. Precise panoramic shots: Exact pans for perfect panoramic seams. Robust and durable: High-quality materials for a long service life. Easy to use: Stepless adjustment and finely adjustable axes. Compatibility: Suitable for all Arca-Swiss quick-release plates and accessories. Compared to similar models, the PC-58L offers a particularly stable construction and sensitive adjustment options that support you in demanding shots. Compatibility Supports all common Arca-Swiss quick release plates Suitable for DSLR, mirrorless cameras, and medium to heavy lenses Technical details Material: aluminum & stainless steel Axles: continuously adjustable Weight: approx. 128g Dimensions: 80 x 73 x 21 mm Connection: Arca-Swiss compatible Scope of delivery 1 x Sunwayfoto Arca Panorama Pan Head PC-58L