Flash tubes for studio flashes from Jinbei and Godox

Flash tube for Jinbei Spark-400D   Technical data: Power: 400 watt seconds suitable for: Jinbei Spark-400D studio flash Scope of delivery: 1 x Jinbei 400Ws flash tube

If your Jinbei HD-600 fires weakly, inconsistently or not at all, the flash tube is often worn out. Instead of replacing the whole head, swap in this original Jinbei replacement tube and get back to shooting. Replacement flash tube for the Jinbei HD-600 Rated for 600 Ws Fits the HD-600 versions including the HD-600 V Brings your battery strobe back to life Your strobe fully working again Repair instead of replace The flash tube is a wear part. When it fails, the rest of the strobe is usually perfectly fine – replacing the tube saves you buying a new head. A spare for important jobs If you use the HD-600 on location regularly, a spare tube in the case is cheap insurance – including when a tube cracks after a knock. What it looks like in practice Tube broken in transit After an outdoor shoot you notice the tube has cracked on the way home. Instead of sending the strobe off for repair, you fit the new tube and are ready for the next job. What to know before you order High voltage warning The capacitors can stay charged even when the unit is off. Only change the tube with the strobe switched off, battery removed and cooled down, and never touch the contacts. Don't handle the glass with bare fingers – clean gloves are best. If you're unsure, have a technician do it. Check your model Jinbei uses different tubes for different strobes. This tube is for the HD-600 series – the HD-610, HD-601 or HD-600 Max need their own matching tube. Technical details at a glance Manufacturer: Jinbei Type: replacement flash tube Power rating: 600 Ws Compatibility: Jinbei HD-600 versions including HD-600 V In the box 1 x Jinbei flash tube 600 Ws

Your Godox QT400II or QT600II fires weaker, unevenly or not at all, even though the electronics are fine. Usually the flash tube is worn out. This matching replacement part gets the studio strobe back to full power quickly. Replacement flash tube for Godox QT400II and QT600II Colour temperature 5600 K User replaceable by pulling out and plugging in A sensible spare for the studio A wear part worth keeping in stock For the QT II range The tube is designed for the QT400II and QT600II. Replacement is done by pulling out the old tube and plugging in the new one. How the change works Switch the strobe off, disconnect it from power and wait until the protective dome and tube are cold. Carefully remove the dome, unwind the trigger wire from its holder and pull the tube out. Support the new tube by its legs, push it in, wind the trigger wire back on and refit the dome. How this works in practice A spare for the studio If you use the QT400II or QT600II for booked jobs, keep a spare tube ready. If it fails during work, you swap it and carry on. What you should know before you order For QT400II and QT600II only This tube fits the QT400II and QT600II. The newer QT III range or other studio strobes need their own matching tube. Handle it cleanly When changing the tube, handle it only with clean cotton gloves or a microfibre cloth. Fingerprints burn into the glass and shorten its life. Only helps with a faulty tube If the strobe no longer responds electronically, the tube is not the cause. Contact us first before ordering the wrong part. Technical details at a glance Colour temperature: 5600 K Compatible with: Godox QT400II, QT600II Replacement: pull out and plug in, user replaceable Scope of delivery 1 x Godox flash tube for QT400II and QT600II

Godox Glass lamp cover for AD300proReplacement protective glass for Godox AD300Pro flash. Only compatible with the AD300Pro from Godox.Scope of delivery:1x Godox AD300pro protective glass

Godox Flash Tube for AD400Pro and AD400Pro II The Godox flash tube compatible with AD400Pro and AD400Pro II is the right original replacement part if you want to keep your flash unit fully operational. It offers 400 Ws of power, a color temperature of 5600 K, and can be replaced by the user. This allows you to quickly and easily get your Godox flash unit back up and running. Suitable for This flash tube is intended for owners of a Godox AD400Pro or AD400Pro II who are looking for a suitable and original replacement part. It is suitable for photographers who work in the studio or on the go and want a clean, compatible solution in case of a defect or wear and tear of their flash tube. Original Godox product Suitable for Godox AD400Pro and Godox AD400Pro II User-replaceable 400 Ws power Color temperature of 5600 K Suitable replacement part for quick continued operation of your flash unit What makes this product special The key advantage of this Godox flash tube is that it is designed to fit the AD400Pro and AD400Pro II perfectly. You are not getting a generic accessory, but an original Godox product that is tailored to these models. This ensures a reliable replacement solution and gives you peace of mind when using your flash unit. Compatibility Suitable for Godox AD400Pro Suitable for Godox AD400Pro II Technical details Brand: Godox Product type: Flash tube Power: 400 Ws User replaceable: Yes Color temperature: 5600 K Scope of delivery 1 x Godox flash tube compatible with AD400Pro and AD400Pro II Conclusion This Godox flash tube is the right choice if you are looking for an original and compatible replacement part for your Godox AD400Pro or AD400Pro II. You benefit from guaranteed compatibility, easy replaceability, and clearly defined product features. Ideal for anyone who wants to get their flash unit back up and running reliably and without any detours.

Jinbei HD-610 HD-601 HD-400pro replacement flash tubeFlash tube for various Jinbei flashes Technical data:up toPower: 600 watt secondsto fit:  Jinbei HD-601Jinbei HD-610Jinbei HD-400proJinbei Mars-3 proScope of delivery:1 x Jinbei 600Ws Flash Tube

This Jinbei flash tube replaces the flash tube at the Jinbei DM-3 / DM-5 studio flash units and restores their operational readiness! The problem-free and fast exchange takes place by pulling out the old or plugging in the new tube.Notes on changing the flash tubeTo change the flash tube, turn off the flash, disconnect it from the power supply, and wait until the tube is cold. Always use clean cotton gloves or a microfiber cloth to change the flash tube.Uncoil the twisted ignition wire from the flash tube holder and carefully pull the lamp out of the device. To insert a new flash tube, support the legs of the replacement tube and carefully slide it into the end position. Then rewind the ignition wire around the flash tube holder.Technical Details:Compatible with: Jinbei DM-3 DM-4 DM-5 studio flashesand other following Jinbei Flash:SMART V-300SMART V-400EC V-300 Studio FlashEC V-400 Studio FlashDM2-200 Studio FlashDM2-300 Studio FlashDM2-400 Studio FlashDM-3 Studio FlashDM-5 Studio FlashDM-4 Studio FlashSPARK II-300 Studio FlashSPARK II-400 Studio FlashSPARK II-300 2018 versionSPARK II-400 2018 versionSPARK III-400 LCD versionDPE-300 Studio FlashDPE-400 Studio FlashDPIII-300 Studio FlashDPIII-400 Studio FlashDPSIII-300 Studio FlashDPSIII-400 Studio Flashnew FLII-500 Standard Flash HeadScope of delivery:1 x Jinbei 250 - 400 Ws flash tube for DM-3 DM-4 DM-5 studio flashes

Jinbei 150 Watt replacement modelling light for Spark / DP & DP-II & DP-III studio flashesThis Jinbei modeling light replaces the modeling light on the Jinbei DP, DPII, DPIII, DPE, Millennia II, Spark studio flash units and restores their operational readiness! The problem-free and fast exchange takes place by pulling out the old or inserting the new modelling light.Notes on changing the modelling lightTo change the modeling lamp, turn off the flash, disconnect it from the power supply, and wait until the modeling lamp is cold. Please use clean cotton gloves or a microfibre cloth to change the modelling light.Technical details:Power consumption: 150 WLamp base: E27Compatible with: Jinbei DP, DPII, DPIII, DPE, Millennia II, Spark studio flashesRA: 99.8TLCI: 100Lux: 4280Kelvin: 2850KScope of delivery:1 x Jinbei modeling lamp 150 W for Jinbei DP, Millennia, Spark studio flashesNote: The lights will be checked by us before shipment, if they arrive broken, please contact us immediately.

Your Godox H2400P flash head on the P2400 pack no longer delivers full power or fires unevenly, even though the pack is fine. Usually the flash tube is worn out. This matching replacement part gets the head back to full strength quickly. Replacement flash tube rated 2400 Ws for the Godox H2400P flash head Colour temperature 5600 K User replaceable A spare for demanding, continuous professional use Full power in a high-end system For the H2400P flash head The tube is designed for the powerful H2400P flash head on the P2400 pack. It delivers the full 2400 Ws and sits without readjusting. Swap it yourself instead of sending it in The tube is user replaceable. You save the service route and have the head ready again the same day. How this works in practice A spare for production If you work with the P2400 system, you cannot afford a failure mid production. A spare tube in the case keeps things running. What you should know before you order For the H2400P only This tube fits the H2400P flash head. Other Godox heads need their own matching tube, even at similar wattage. Take care when changing it With this much power it matters: switch off, disconnect from power and let the tube and protective glass cool fully. Handle the glass only with gloves or a cloth. Only helps with a faulty tube If the head no longer responds electronically, the tube is not the cause. Contact us first before ordering the wrong part. Technical details at a glance Output: 2400 Ws Colour temperature: 5600 K Compatible with: Godox H2400P flash head (P2400) Replacement: user replaceable Scope of delivery 1 x Godox flash tube FT-H2400P (2400 Ws)

Your Godox AD600Pro is firing weakly, erratically, or not at all, even though the battery and electronics are working properly. In most cases, the flash tube is worn out. With the original replacement part, the flash will be fully operational again in no time. Original Godox flash tube for AD600Pro and AD600Pro II 600 Ws output, color temperature 5600 K Can be replaced by the user A practical spare for studio and on-location use The perfectly fitting original replacement part Designed specifically for the AD600Pro The tube is specifically designed for the AD600Pro and AD600Pro II. You’re not getting a generic accessory, but an original part that fits perfectly and delivers full performance. Replace it yourself instead of sending it in The tube can be replaced by the user. You save yourself a trip to the service center and have the flash ready to use again the same day. Here’s what that looks like in everyday use Spare for Production If you’re using the AD600Pro for tight deadlines, keep a spare tube on hand. If it fails during a shoot, just swap it out and keep working. What You Should Know Before Ordering For the AD600Pro only This tube is compatible with the AD600Pro and AD600Pro II. For other Godox models, you’ll need the corresponding tube, even if the wattage is similar. Caution When Replacing Turn off the flash, unplug it from the power source, and let the tube cool down. Handle the glass only with gloves or a cloth; fingerprints will burn into the surface. This only applies to defective tubes If the flash no longer responds electronically, the tube is not the cause. Please contact us first before ordering the wrong part. Technical Details at a Glance Power: 600 Ws Color Temperature: 5600 K Compatible with: Godox AD600Pro, AD600Pro II Replacement: user-replaceable Package Contents 1 x Godox flash tube for AD600Pro and AD600Pro II

When you swap modifiers, it's easy to touch the flash tube or modelling lamp – something you really want to avoid. This safety glass protector fits your Jinbei HD-610 and shields the delicate light source from fingers, knocks and dirt. Safety glass protector for the Jinbei HD-610 Protects the flash tube and light source from damage and dirt Prevents skin contact when changing modifiers Helps extend flash tube life Less risk for your most delicate part Protection when changing modifiers Fitting softboxes, beauty dishes or reflectors in a hurry, it's easy to touch or knock the tube. The protector acts as a barrier so fingerprints and bumps don't reach the light source directly. Longer flash tube life Skin oils and dirt on the tube can bake on under heat and damage it. The protector keeps the tube clean, helping it last longer. What this looks like in practice Location shoot with frequent changes On an outdoor fashion shoot you switch the HD-610 between a reflector and an octabox several times. With the protector fitted, you don't have to worry about the tube, and dust or sand can't reach it directly. What you should know before you order Jinbei HD-610 only The protector is intended for the Jinbei HD-610. Fit on the HD-610 Pro or other Jinbei heads is not confirmed – ask us before ordering if in doubt. Glass is still glass Safety glass can still break if dropped hard. It protects the tube from contact and light knocks but is no substitute for careful transport. Single unit in stock We currently have only one in stock. Technical details at a glance Brand: Jinbei Type: glass protector Material: safety glass Fits: Jinbei HD-610 Function: protects flash tube and light source What's in the box 1 x glass protector for Jinbei HD-610

If your Godox AD800Pro is no longer delivering full power or is firing erratically, even though everything else is working, the flash tube has likely reached the end of its service life. With the right replacement part, you can keep your studio flash in reliable working order. Replacement flash tube for the Godox AD800Pro 800 Ws output, color temperature 5600 K Can be replaced by the user Handy as a replacement or spare in the studio Maintain reliable flash performance Designed for the AD800Pro The tube is made for the AD800Pro, making it a perfect fit for targeted replacement. It fits without any readjustment and delivers full power. Replace it yourself in minutes The tube can be replaced by the user. Instead of sending the flash in for service, you’ll be back in action the same day. Here’s what that looks like in everyday use Spare for regular productions For studios and recurring shoots, a second tube is a sensible backup. If the first one fails, you can keep going without interruption. What you should know before ordering For the AD800Pro only This tube fits the AD800Pro. For other Godox models, you’ll need the corresponding tube, even if the wattage sounds similar. Caution When Replacing Turn off the flash, unplug it from the power source, and let the tube cool down. Only touch the glass with gloves or a cloth—fingerprints will burn into it. Only Helps If the Tube Is Defective If the flash no longer responds electronically, the tube is not the cause. Please contact us before ordering the wrong part. Technical Details at a Glance Power: 800 Ws Color temperature: 5600 K Compatible with: Godox AD800Pro Replacement: user-replaceable Package contents 1 x Godox flash tube for AD800Pro

Godox Flash Tube for AD300Pro and AD300Pro II The Godox flash tube for AD300Pro and AD300Pro II is the right original replacement part if you want to keep your flash unit fully operational. It offers 300 Ws of power, a color temperature of 5600 K, and can be replaced by the user. This allows you to quickly and easily get your Godox flash unit back up and running. Suitable for This flash tube is intended for owners of a Godox AD300Pro or AD300Pro II who are looking for a suitable and original replacement part. It is suitable for photographers who work in the studio or on the go and want a clean, compatible solution in case of a defect or wear and tear of their flash tube. Advantages at a glance Original Godox product Suitable for Godox AD300Pro and Godox AD300Pro II User-replaceable 300 Ws power output Color temperature of 5600 K Omega-shaped, 2-pin design What makes this product special The key advantage of this Godox flash tube is that it is designed to fit the AD300Pro and AD300Pro II perfectly. You are not getting a generic accessory, but an original Godox product that is tailored to these models. This ensures a reliable replacement solution and gives you peace of mind when using your flash unit. Compatibility Suitable for Godox AD300Pro Suitable for Godox AD300Pro II Technical details Brand: Godox Product type: Flash tube Power: 300 Ws Shape: Omega-shaped Design: 2-pin User replaceable: Yes Color temperature: 5600 K Scope of delivery 1 x Godox flash tube compatible with AD300Pro and AD300Pro II Conclusion This Godox flash tube is the right choice if you are looking for an original and compatible replacement part for your Godox AD300Pro or AD300Pro II. You benefit from guaranteed compatibility, easy replacement, and clearly defined product features. Ideal for anyone who wants to get their flash unit back up and running reliably and without any detours.

Godox Flash Tube for SK300IIV and SK400IIV – Replacement flash tube for studio photography The Godox Flash Tube for SK300II and SK400II is the perfect replacement component for your studio flash units. With high light output and precise color rendering, it ensures consistent results in your professional photography. This flash tube has been specially developed as an original replacement part for the Godox SK300II and SK400II studio flashes. It impresses with its reliable performance, high light output, and long service life. Thanks to its simple installation, you can replace the flash tube yourself and be up and running again in no time – whether in the studio or on location. The integrated UV protective coating ensures natural color rendering, while the precise design guarantees a perfect fit. Special features and advantages High color fidelity thanks to UV-coated glass tube Long service life – ideal for intensive use in photo studios Easy installation without additional tools Perfect compatibility with SK300IIV & SK400IIV – no readjustment necessary Compact replacement for studio storage Compared to third-party products, the original Godox flash tube is optimally matched to the respective flash system and thus guarantees consistent light quality. Compatibility Godox SK300II Godox SK400II Note: Not compatible with older SK models without the “II” designation. Technical Light color: approx. 5600K (daylight) Power: approx. 300–400 Ws depending on flash model Mounting: plug-in system, suitable for SKIIV series Service life: up to 10,000 flashes Scope of delivery 1x Godox flash tube for SK300II-V / SK400II-V

This safety glass can be mounted on the HD-610 Pro from Jinbei. It protects the sensitive lighting element of the flash from damage and dirt, thus extending the life of the lamp. It also prevents the risk of direct skin contact with the lamp when changing the light shaper. Fits to: Jinbei HD-610 Pro   Scope of delivery: 1 x protection glass for Jinbei HD-610 Pro  

Your Godox AD1200Pro no longer delivers full power or fires unevenly, while the battery and electronics are fine. Usually the flash tube is worn out. This original replacement part gets the flash back to full strength quickly. Original Godox flash tube for AD1200Pro 1200 Ws output, colour temperature 5600 K User replaceable A sensible spare for demanding productions The exact-fit original part Matched to the AD1200Pro The tube is designed for the AD1200Pro. You get an original part that fits and delivers full output, not a universal accessory. Swap it yourself instead of sending it in The tube is user replaceable. You save the service route and have the flash ready again the same day. How this works in practice A spare for production The AD1200Pro is used where a lot of power is needed. A spare tube in the case keeps the production running if the tube fails. What you should know before you order For the AD1200Pro only This tube fits the AD1200Pro. Other Godox models need their own matching tube, even at similar wattage. Take care when changing it Switch the flash off, disconnect it from power and let the tube cool. Handle the glass only with gloves or a cloth, as fingerprints burn in. Only helps with a faulty tube If the flash no longer responds electronically, the tube is not the cause. Contact us first before ordering the wrong part. Technical details at a glance Output: 1200 Ws Colour temperature: 5600 K Compatible with: Godox AD1200Pro Replacement: user replaceable Scope of delivery 1 x Godox flash tube for AD1200Pro

Glass protective cover for Godox AD1200Pro – Reliable protection for your flash tube The glass protective cover for the Godox AD1200Pro is an essential accessory if you want to protect your flash tube optimally. It protects the sensitive glass elements from dust, scratches, and impacts, thereby extending the life of your equipment. Specially designed for the Godox AD1200Pro, the glass protective cover fits perfectly and is easy to install. Thanks to its robust construction, it offers you maximum safety in the studio and on location. The cover not only protects against external influences, but also ensures even light distribution without compromising light quality. Special features and advantages Perfect fit for the Godox AD1200Pro Robust glass material for optimal protection Easy to use and quick to install Protects against dust, dirt, and physical damage Extends the life of your flash tube Compatibility Specially designed for the Godox AD1200Pro Not compatible with other flash models Technical details Material: High-quality protective glass Weight: approx. 90 g Dimensions: approx. 69.8 x 79.4 x 65 Color: Transparent Mounting: Directly on the flash head of the Godox AD1200Pro Scope of delivery 1x glass protective cover for Godox AD1200Pro With this glass protective cover, you get a durable, practical, and easy-to-use accessory that provides optimal protection for your investment in the Godox AD1200Pro.  

The Godox AD-H1200B extension head ships without a flash tube – and a broken tube takes your entire 1200Ws setup out of action. This genuine Godox 1200Ws tube is the heart of the AD-H1200B, combining the power of two AD600 units in one head. Genuine Godox 1200Ws flash tube Fits the Godox AD-H1200B (Bowens) extension head 5600 K colour temperature For first-time setup or as a spare Full power from two AD600s 1200Ws in a single head The AD-H1200B links two AD600 units into one 1200Ws head. This tube is essential – without it, the head stays dark. A spare that keeps the shoot going Flash tubes are wear parts. With a spare in your bag, outdoor jobs and multi-day productions don't hinge on a single component. What it looks like on set Overpowering the sun On the beach you want to balance a low evening sun with a large octabox. Two AD600s on the AD-H1200B with this 1200Ws tube give you enough punch to darken the ambient, even from a distance. Good to know before you order Not for a single AD600 This tube belongs in the AD-H1200B extension head. For running a single AD600 on its own, you need the matching 600Ws tube. Handle with care Only change the tube with all units switched off and the head cooled down, and don't touch the glass with bare fingers – skin oil shortens its life. Specifications Type: flash tube (replacement/initial fit) Power: 1200Ws Colour temperature: 5600 K Fits: Godox AD-H1200B (Bowens mount) In the box 1 x Godox 1200Ws flash tube

Your Godox ML-150 II won't fire any more, flickers, or the flash tube is visibly damaged? Instead of replacing the whole macro ring flash, just swap the tube. This replacement flash tube is made for the Godox ML-150 II and gets your ring flash back on the camera. Replacement flash tube for the Godox ML-150 II macro ring flash Godox spare part Affordable repair instead of buying a new ring flash Repair your ring flash instead of replacing it Swap the part that wears out The flash tube is the part of a flash that ages over time or breaks first after a drop. If the rest of your ML-150 II is fine, replace just the tube and keep your familiar setup with power unit and adapter rings. A spare for heavy users If you regularly shoot macro, dental or product details with the ring flash, a spare tube is worth having. When the old one fails, you don't lose days waiting for a part. What it looks like in practice Failure mid-documentation You're documenting samples or jewellery with the ML-150 II, and suddenly the ring stays dark even though the power unit is charging. The tube is the culprit. With the spare you get the flash repaired and carry on with the same light character. What you should know before ordering Installation by a qualified technician Flash units carry dangerously high voltages even when switched off – the capacitor may still be charged. Have the tube replaced by a technician or service centre unless you're experienced with flash repairs. ML-150 II only The tube is intended for the Godox ML-150 II. Fit with the original ML-150 (non-II) or other ring flashes is not confirmed. Not every fault is the tube If the flash won't fire, the power unit, cable or electronics may also be to blame. Check before ordering so you don't replace the wrong part. Technical details at a glance Brand: Godox Part number: 804-ML152-001 Type: replacement flash tube Compatible with: Godox ML-150 II macro ring flash In the box 1 x Godox replacement flash tube for ML-150 II

600W Flash Tube Dedicated Flash Tube for Godox Witstro AD600Package Content:1x Godox AD-H600 Flash bulb