Buy a Godox clip-on flash
With a Godox hot shoe flash, you gain more control over lighting, atmosphere, and image impact. Godox flash units are ideal for portraits, events, photojournalism, product photography, and creative lighting design. When selecting a flash, make sure it is compatible with your camera system and supports the features you need, such as TTL, HSS, or wireless radio control.
Temporarily Out of Stock
New
Godox ES01 Electric Suction Mount Set of 3
Mount a light where no stand will fit: the Godox ES01 K3 is an electric suction base that attaches flashes and LED lights up to 4.4 lb (approx. 2 kg) to smooth surfaces – desks, glass, windows, walls and more. The suction runs automatically from a built-in battery, and the 1/4"-20 thread makes mounting effortless. Electric suction base for flashes and LED lights up to 4.4 lb (approx. 2 kg) Automatic suction with a built-in battery, charging via USB-C 1/4"-20 thread; fits lights with a baby pin or 1/4"-20 mount Three-base design for a secure, stable hold Flexible light positions without a stand Electric suction with stability control The base suctions on automatically and keeps the vacuum up so the mount stays secure. When the battery runs low, it warns with a buzz and a red indicator – so you know in good time. Many surfaces, one thread Via the 1/4"-20 thread you mount a flash or LED directly; lights with a baby pin or 1/4"-20 fit too. So you place light on glass, windows, a desk or a wall – ideal for unusual angles in the studio, on set and in product shots. How this works in practice Godox flashes and LEDs securely mounted Compatible with the Godox flashes AD100 Pro / AD100 Pro II, AD200 Pro / AD200 Pro II, AD300 Pro / AD300 Pro II and the LEDs P260C PRO, FH50Bi, FH50R and LED308II – and in general any light up to 2 kg that fits a baby pin or 1/4"-20. What you should know before you order Suitable surfaces only For a secure hold the base needs a smooth, clean and load-bearing surface. Stay within the rated weight of approx. 2 kg (4.4 lb) and check the hold before letting go – especially overhead or above delicate gear. Light not included This is the base – a flash or LED light is not included. Technical details at a glance Type: electric suction base for flash/LED Load capacity: up to 4.4 lb (approx. 2 kg) Mount: 1/4"-20 thread; compatible with baby pin or 1/4"-20 Suction: automatic (electric), maintains mount stability Power: built-in battery, charging via USB-C Warning: buzz and red indicator on low battery Suitable for: desks, glass, windows, walls and other smooth surfaces Model: Godox ES01 K3 EAN: 6952344247105 Scope of delivery 1 x Godox ES01 K3 electric suction base (kit) USB-C charging cable
CHF 89.00*
Temporarily Out of Stock
New
Godox PS01 Magnetic Phone Stand
More freedom for smartphone lighting: the Godox PS01 lets you take the Godox A2 off your phone while keeping it within reach. The stand has two magnetic rings joined by a hinged arm – your phone snaps onto one, the A2 onto the other. Because it rotates 360°, you switch in an instant between shooting someone else and taking a selfie. Two magnetic rings: one for your phone, one for the Godox A2 Rotates 360° – quick switch to selfies Hinged arm to place the flash above or beside the camera 1/4-inch thread in the lower ring to mount on a tripod or light stand Light off the phone – for more depth Flash from the side or above With the flash sitting directly on the phone, the light quickly looks flat. With the hinged arm you place the A2 above or beside the camera – so the light hits your subject more directionally and adds depth to the image. Magnetic, no clamps Your phone and the A2 both attach magnetically – you need no clamps and are ready in seconds. Via the 1/4-inch thread in the lower ring you put the stand on a tripod or light stand and use the A2 as a free-standing light exactly where you want it. How this works in practice Switch between photo and selfie Thanks to the 360° rotation you swing quickly from shooting someone opposite you to a selfie without rebuilding – and the flash stays optimally positioned. What you should know before you order Accessory for the Godox A2 The PS01 is made as an accessory for the Godox Smartphone Xenon Flash A2 and works with all four colour versions. The phone and the A2 flash are not included. Technical details at a glance Type: magnetic mount for phone and flash Mounting: magnetic, two rings with hinged arm Rotation: 360° Stand connection: 1/4-inch thread in the lower ring Compatible: Godox A2 (all colour versions) Colour: black EAN: 6952344250129 Scope of delivery 1 x Godox PS01 magnetic stand
CHF 13.00*
Temporarily Out of Stock
New
Godox AK-R1 MINI Accessory Kit for the Godox A2 Round Flash Head
Shape the light instead of just firing it: the Godox AK-R1 MINI lets you put the light from your Godox A2 exactly where you want it. The set contains eight modifiers that snap magnetically onto the front of the flash – from a snoot for a spotlight effect to a CTO gel for warmer light. The parts can also be combined. 8 magnetic modifiers that snap onto the front of the A2 and can be combined Snoot, barn doors and honeycomb grid for directed light with little spill Diffuser plate and magnetic diffuser for softer light, bounce card for indirect flash 1/2 CTO and 1/1 CTO gels for warmer flash light Eight modifiers for the A2 Directed: snoot, barn doors, grid The snoot, barn doors and honeycomb grid make the light narrower and harder. That lets you pick out a dish or a portrait without lighting up the background. Soft and warm: diffusers, bounce, CTO The diffuser plate, magnetic diffuser and bounce card do the opposite and make the A2's light softer and less direct. The 1/2 CTO warms the flash slightly, while the 1/1 CTO brings it to the colour of tungsten light – handy for matching existing ambient light. How this works in practice Combinable and quick to swap You can use several parts at once, such as a CTO gel behind the honeycomb grid with the barn doors around it. As everything holds magnetically, you swap modifiers in seconds. What you should know before you order For the Godox A2 only The set is made for the magnetic ring on the front of the Godox Smartphone Xenon Flash A2 and fits every colour version of that flash. The A2 itself is not included. Use the A2 off the phone with modifiers When you work with the modifiers, Godox recommends using the A2 away from the phone (e.g. magnetically on a surface or with the PS01 mount). Technical details at a glance Type: set of magnetic light modifiers for round flash head (Godox A2) Quantity: 8 pieces Included: SN01 snoot, FR01 barn doors, HC01 honeycomb grid, D01 diffuser plate, MD01 magnetic diffuser, BC01 bounce card, 1/2 CTO gel, 1/1 CTO gel Mounting: magnetic (front magnetic ring of the A2) Compatible: Godox A2 (all colour versions) EAN: 6952344249970 Scope of delivery 1 x SN01 snoot 1 x FR01 barn doors 1 x HC01 honeycomb grid 1 x D01 diffuser plate 1 x MD01 magnetic diffuser 1 x BC01 bounce card 1 x 1/2 CTO gel 1 x 1/1 CTO gel
CHF 36.00*
Temporarily Out of Stock
New
Godox Smartphone Xenon Flash A2 White
Real flash for your iPhone: the Godox A2 is a magnetic xenon flash that simply attaches to the back of your iPhone and is controlled via the Godox Camera app or the buttons on the housing. A bi-colour LED ring around the flash tube gives you continuous light for video too. In a fraction of a second the xenon flash puts out far more light than the phone's LED and freezes even fast motion. Real xenon flash with guide number 15, TTL auto or manual power High-speed sync up to 1/8000 s – flash even in bright daylight Bi-colour LED ring 2800–6000 K, CRI and TLCI 96 or higher Magnetic on both sides: back to iPhone/metal, front for modifiers Flash and continuous light in one Xenon power instead of the phone LED The xenon flash puts out a lot of light in a brief burst – enough to light cleanly and freeze motion even in a dark café or against the light. With high-speed sync a sunny background stays in the shot while the flash lifts your subject. Best results are within about 2 m. LED ring for video For video or even continuous light, switch on the LED ring: four fixed colour temperatures (2800, 3200, 4500, 5600 K) via the buttons, or continuous 2800–6000 K in the app. With CRI/TLCI from 96, colours render naturally. LED power: 3 W continuous, 18 W burst. How this works in practice Control via app and buttons In A mode the Godox Camera app handles exposure automatically, with three flash effects (Natural, Even, Contrast). In M mode you set shutter speed, ISO and white balance yourself and choose TTL or manual power (1/1–1/128 in 1/3 steps, exposure compensation -3 to +3). Pairing is via NFC, then the connection runs over Bluetooth up to 15 m – even when the flash is away from the phone. Magnetically mounted, flexibly shaped The A2 sticks magnetically to the back of your iPhone, to metal or to a stand – so light can come from the side or above. The magnetic ring on the front takes the included dome diffuser or the modifiers from the Godox AK-R1 MINI Accessory Kit. With the optional PS01 phone mount, which rotates 360°, switching to selfies is easy. What you should know before you order For iPhone (iOS 18.0 or later) The A2 is designed for iPhone 15 and newer and requires iOS 18.0 or later and the Godox Camera app. Android/HarmonyOS support is in development according to the manufacturer. Check your model and iOS version before buying. Mind the range As a compact smartphone flash the A2 is made for short distances – for best results within about 2 m of the subject. Technical details at a glance Type: smartphone flash with xenon flash tube and bi-colour LED ring Guide number: 15 (ISO 100, metres) at full power Flash modes: TTL and manual (1/1–1/128, 1/3 steps); exposure compensation -3 to +3 HSS: up to 1/8000 s; recycle time approx. 2 s at full power; approx. 400 flashes per charge LED: 3 W continuous / 18 W burst; 2800–6000 K (app) or 2800/3200/4500/5600 K (buttons); CRI/TLCI ≥ 96; approx. 30 min at 100% Control: Godox Camera app, Bluetooth with NFC pairing, range up to 15 m; iOS 18.0+ Mounting: magnetic (back); light-modifier magnetic ring on the front Battery: lithium 7.7 V / 500 mAh; charging via USB-C (5 V / 2 A), approx. 1 h Operating temperature: 0–35 °C Dimensions / weight: Ø 63.8 x 25.8 mm / 93 g Colour: white EAN: 6952344249482 Scope of delivery 1 x Godox A2 smartphone xenon flash (white) 1 x magnetic dome diffuser (MDP01) 1 x magnetic ring 1 x carrying pouch
CHF 89.00*
Temporarily Out of Stock
New
Godox Smartphone Xenon Flash A2 Black
Real flash for your iPhone: the Godox A2 is a magnetic xenon flash that simply attaches to the back of your iPhone and is controlled via the Godox Camera app or the buttons on the housing. A bi-colour LED ring around the flash tube gives you continuous light for video too. In a fraction of a second the xenon flash puts out far more light than the phone's LED and freezes even fast motion. Real xenon flash with guide number 15, TTL auto or manual power High-speed sync up to 1/8000 s – flash even in bright daylight Bi-colour LED ring 2800–6000 K, CRI and TLCI 96 or higher Magnetic on both sides: back to iPhone/metal, front for modifiers Flash and continuous light in one Xenon power instead of the phone LED The xenon flash puts out a lot of light in a brief burst – enough to light cleanly and freeze motion even in a dark café or against the light. With high-speed sync a sunny background stays in the shot while the flash lifts your subject. Best results are within about 2 m. LED ring for video For video or even continuous light, switch on the LED ring: four fixed colour temperatures (2800, 3200, 4500, 5600 K) via the buttons, or continuous 2800–6000 K in the app. With CRI/TLCI from 96, colours render naturally. LED power: 3 W continuous, 18 W burst. How this works in practice Control via app and buttons In A mode the Godox Camera app handles exposure automatically, with three flash effects (Natural, Even, Contrast). In M mode you set shutter speed, ISO and white balance yourself and choose TTL or manual power (1/1–1/128 in 1/3 steps, exposure compensation -3 to +3). Pairing is via NFC, then the connection runs over Bluetooth up to 15 m – even when the flash is away from the phone. Magnetically mounted, flexibly shaped The A2 sticks magnetically to the back of your iPhone, to metal or to a stand – so light can come from the side or above. The magnetic ring on the front takes the included dome diffuser or the modifiers from the Godox AK-R1 MINI Accessory Kit. With the optional PS01 phone mount, which rotates 360°, switching to selfies is easy. What you should know before you order For iPhone (iOS 18.0 or later) The A2 is designed for iPhone 15 and newer and requires iOS 18.0 or later and the Godox Camera app. Android/HarmonyOS support is in development according to the manufacturer. Check your model and iOS version before buying. Mind the range As a compact smartphone flash the A2 is made for short distances – for best results within about 2 m of the subject. Technical details at a glance Type: smartphone flash with xenon flash tube and bi-colour LED ring Guide number: 15 (ISO 100, metres) at full power Flash modes: TTL and manual (1/1–1/128, 1/3 steps); exposure compensation -3 to +3 HSS: up to 1/8000 s; recycle time approx. 2 s at full power; approx. 400 flashes per charge LED: 3 W continuous / 18 W burst; 2800–6000 K (app) or 2800/3200/4500/5600 K (buttons); CRI/TLCI ≥ 96; approx. 30 min at 100% Control: Godox Camera app, Bluetooth with NFC pairing, range up to 15 m; iOS 18.0+ Mounting: magnetic (back); light-modifier magnetic ring on the front Battery: lithium 7.7 V / 500 mAh; charging via USB-C (5 V / 2 A), approx. 1 h Operating temperature: 0–35 °C Dimensions / weight: Ø 63.8 x 25.8 mm / 93 g Colour: black EAN: 6952344249475 Scope of delivery 1 x Godox A2 smartphone xenon flash (black) 1 x magnetic dome diffuser (MDP01) 1 x magnetic ring 1 x carrying pouch
CHF 89.00*
Temporarily Out of Stock
Godox ES01 Electric Suction Mount
You want a small light right where a tripod won’t fit. On the windowpane, so the product is backlit. Under the kitchen cabinet above the countertop. On the tiled wall in the bathroom, because there’s nothing else there to clip it to. A tripod needs the floor; a clamp needs an edge. The Godox ES01 just needs a smooth surface. Holds up to 360 g, enough for mini clip-on flashes and small LED lights Sticks to glass, windows, tiles, painted wood, and tabletops Motorized suction cup—no lever and no manual pumping Includes a cold shoe with a 1/4-inch thread; a flash or light fits right on it Release at the push of a button, without having to wedge your fingernail under the edge Built-in battery, charges via USB-C; cable and Allen wrench included A second light without a second tripod Motor instead of a lever The suction cup tightens itself—you just press it against the surface. That’s the difference from the lever-style models you find at hardware stores: With those, the pressure from your hand determines how secure the connection is, and you only know it’s secure when it gives way. To release it, you press a button, the vacuum is released, and the mount drops into your hand. Cold shoe and threaded mount included The mount features a cold shoe with a 1/4-inch thread. You can slide a mini hot-shoe flash directly into it, and anything with a tripod thread can be screwed on. The shoe has no electrical contacts, so triggering is done via radio or the flash’s own photocell. The appropriate Allen wrench for the screw connection is included in the box. Here’s what it looks like in everyday use Product photo on the table The main light is in place, but the edge of the object fades into the background. A mini LED like the Litemons LED6Bi on the suction cup mount, attached to the windowpane behind the setup, and the edge is back in focus. Setting up a tripod for this would be in the shot. Flash on the shelf or under the cabinet For small rooms where a flash needs to illuminate from diagonally above: An iT32 mounted on the cold shoe on the underside of the cabinet illuminates the work surface without a tripod leg getting in the way. It’s triggered wirelessly by the transmitter on the camera. What You Should Know Before You Order 360 g is the absolute limit That’s the key number. It’s sufficient for the mini flashes and small Litemons lights that Godox approves for use with this mount. It’s not enough for a camera or for large hot-shoe flashes. If you want to mount a camera on a window, this is the wrong mount; for that, there are kits like the SmallRig SC-15K. The surface must be smooth and clean Glass, tile, paint, sealed wood: all work well. Wood-grain wallpaper, plaster, untreated wood, and any textured surfaces: won’t hold, not even briefly. Dust and grease on the surface reduce adhesion, so wipe the surface clean beforehand. And if in doubt, place something soft under a mounted holder while you’re monitoring it for the first time. The suction cup needs power The pump runs on a built-in rechargeable battery, which is charged via USB-C on the device. The included cable has a USB-A connector on the other end and is about 30 cm long. So if you only have power adapters and power banks with USB-C ports, you’d better have your own cable ready. And you should charge it before use—don’t wait until you’re at the top of the ladder to realize it’s out of juice. If you want a mounting solution that requires no power or charging, you’re better off with the MA02 Magnetic Mounting Kit, provided there’s a ferrous surface nearby. Technical Details at a Glance Load capacity: up to 360 g Mounting: motorized suction cup for smooth, solid surfaces Mount: cold shoe with 1/4-inch thread, without electrical contacts Release: One-button release Power supply: built-in rechargeable battery, USB-C charging port Approved by Godox for use with Mini clip-on flashes and compact Litemons LED lights Package Contents 1 x Godox ES01 motorized suction mount 1 x hot shoe with 1/4-inch thread 1 x Allen wrench 1 x USB-A to USB-C charging cable, approx. 30 cm 1 x user manual
CHF 35.00*
Godox PB1000SX Speedlite Cable Power Pack for Sony
Godox PB1000SX Speedlite Cable for Sony Flash Units The Godox PB1000SX Speedlite Cable connects the Godox PB1000 Power Pack (sold separately) to compatible Sony flash units. Thanks to the additional power supply, the cable supports shorter recharge times and a higher number of full-power flashes. Who is it for? The Godox PB1000SX Speedlite Cable is suitable for photographers who want to use their Sony flash unit with a Godox PB1000 Power Pack. It’s ideal for situations that require a reliable power supply and fast flash readiness. Benefits at a Glance Connects the Godox PB1000 Power Pack to a compatible Sony flash unit Supports shorter charging times Allows for a higher number of full-power flashes Specially designed for use with Sony flash units What makes this product special The Godox PB1000SX Speedlite Cable expands the capabilities of the Godox PB1000 Power Pack. It connects the Power Pack to the flash unit, thereby enabling more efficient flash use during demanding photo shoots. Compatibility The Godox PB1000SX Speedlite Cable is compatible with: Godox PB1000 Power Pack Sony HVL-F58AM Sony HVL-F60RM2 Other selected Sony flash models Technical Details Product Type: Speedlite Cable Model: PB1000SX Usage: Connection between the Godox PB1000 Power Pack and a Sony flash unit Package Contents 1× Godox PB1000SX Speedlite Cable Power Pack for Sony Conclusion The Godox PB1000SX Speedlite Cable lets you connect your Sony flash unit to the Godox PB1000 Power Pack, enabling faster flash recycling and extended shooting capabilities. The cable is a practical addition for photographers who work with compatible Sony flash units. Frequently Asked Questions about the Godox PB1000SX Speedlite Cable Which power pack is the Godox PB1000SX Speedlite Cable compatible with?+ The Godox PB1000SX Speedlite Cable is designed for use with the Godox PB1000 Power Pack. Which Sony flash units is the Godox PB1000SX Cable compatible with?+ The cable is compatible with the Sony HVL-F58AM, HVL-F60RM2 and other selected Sony flash models. What advantages does the Godox PB1000SX Speedlite Cable offer?+ The cable connects to the Godox PB1000 Power Pack and supports shorter recycle times as well as more full-power flashes.
CHF 23.00*
Godox PB1000NX Speedlite Cable Power Pack for Nikon
Godox PB1000NX Speedlite Cable for Nikon Flash Units The Godox PB1000NX Speedlite Cable connects the Godox PB1000 Power Pack (sold separately) to compatible Nikon Speedlite flash units. This connection enables faster recharge times and supports a higher number of full-power flashes. The cable is a practical addition for photographers who want to expand their flash capabilities for professional use. Who It’s For The Godox PB1000NX Speedlite Cable is suitable for photographers who want to use Nikon Speedlite flash units with the Godox PB1000 Power Pack. It is particularly well-suited for applications that require fast flash recycling times and a higher number of flashes. Benefits at a Glance Connection between the Godox PB1000 Power Pack and compatible Nikon flash units Shorter flash recharging times Higher number of full-power flashes Compatible with various Nikon Speedlite models A practical solution for photographers with high power requirements What makes this product special The Godox PB1000NX Speedlite Cable enables direct communication between the Godox PB1000 Power Pack and compatible Nikon Speedlite flash units. This enables more efficient flash power delivery and expands the capabilities of compatible flash systems. Compatibility The Godox PB1000NX Speedlite Cable is compatible with: Nikon SB-910 Nikon SB-28DX Nikon SB-80DX Nikon SB-800 Nikon SB-900 This cable is designed for use with the Godox PB1000 Power Pack. Technical Details Product Type: Cable for Speedlite Flash Units Connection for Godox PB1000 Power Pack Compatible with select Nikon Speedlite flash units Package Contents 1 Godox PB1000NX Speedlite Cable for Nikon Conclusion The Godox PB1000NX Speedlite Cable is the ideal connection solution for photographers who want to use a Godox PB1000 Power Pack with compatible Nikon Speedlite flash units. It supports faster recharge times and a higher number of full-power flashes. Frequently Asked Questions about the Godox PB1000NX Speedlite Cable Which devices is the Godox PB1000NX Speedlite Cable compatible with?+ The cable is designed for the Godox PB1000 Power Pack and selected Nikon Speedlite flash models such as SB-910, SB-28DX, SB-80DX, SB-800 and SB-900. What is the function of the Godox PB1000NX Speedlite Cable?+ The cable enables communication between the Godox PB1000 Power Pack and the Nikon flash unit. What are the benefits of using the Godox PB1000NX Cable?+ The cable enables shorter recycling times and a higher number of full-power flashes.
CHF 23.00*
Godox PB1000CX Speedlite Cable Power Pack for Canon
Godox PB1000CX Speedlite Cable for PB1000 Power Pack and Flash Units The Godox PB1000CX Speedlite Cable connects the Godox PB1000 Power Pack to compatible flash units. By connecting to the external power pack, the cable enables faster recharge times and allows for a higher number of full-power flashes. This provides photographers with a practical solution for longer and more demanding photo shoots. Who It’s For The Godox PB1000CX cable is suitable for photographers who want to use their compatible Godox or Canon Speedlite flash units with a PB1000 Power Pack. It’s ideal for studio shoots, events, weddings, photojournalism, and situations where a reliable flash power source is required. Benefits at a Glance Connects the Godox PB1000 Power Pack to compatible flash units Supports faster charging times Allows for a higher number of full-power flashes Compatible with select Godox and Canon Speedlite flash units A practical accessory for photographers with high power needs What makes this product special The Godox PB1000CX Speedlite Cable connects the PB1000 Power Pack to compatible flash units. This allows you to take advantage of an external power source and extend the runtime of your flash system for longer shoots. Compatibility Godox PB1000 Power Pack Godox Flash Units: TT685 II V100 V1Pro AD200Pro II Other compatible Godox flash units Canon flash units: 600EX 430EZ 540EZ 550EX 580EX 580EX II Other compatible Canon flash units Technical Details Model: PB1000CX Product Type: Speedlite Cable Connection cable for Godox PB1000 Power Pack and compatible flash units Package Contents 1× Godox PB1000CX Speedlite Cable Power Pack for Canon Conclusion The Godox PB1000CX Speedlite Cable is the ideal connection solution for photographers who want to use their PB1000 Power Pack with compatible Godox or Canon Speedlite flash units. It supports efficient flash power delivery and expands the capabilities of your flash system. Frequently Asked Questions about the Godox PB1000CX Speedlite Cable Which flash devices is the Godox PB1000CX cable compatible with?+ The Godox PB1000CX cable can be used with compatible Godox and Canon Speedlite flash devices as well as the Godox PB1000 Power Pack. What is the Godox PB1000CX Speedlite cable used for?+ The cable connects the Godox PB1000 Power Pack with compatible flash devices and supports shorter recycling times and more full-power flashes. Is the Godox PB1000CX cable suitable for photographers?+ Yes. The cable is suitable for photographers who want to use compatible flash devices with a Godox PB1000 Power Pack.
CHF 23.00*
Only 3 available
Godox PB1000 Battery Grip for Clip-On Flashes
Godox PB1000 Power Pack for Fast Charging Times with Clip-On Flashes The Godox PB1000 battery grip is a compact power pack for photographers who want to make their hot-shoe flashes more powerful and ready for use faster. With its built-in lithium-ion battery, the PB1000 offers shorter charging times and allows for a higher number of full-power flashes. Its compact design and USB-C port make this power pack a practical solution for mobile photography. Who is it for? The Godox PB1000 Power Pack is suitable for photographers who work with compatible hot-shoe flashes and need a reliable additional power source. It’s ideal for studio shoots, events, photojournalism, and mobile photography, where fast flash response and extended runtime are important. Benefits at a Glance Faster flash readiness with recharge times of up to 1 second Higher number of flashes per battery charge USB-C input/output for charging and powering small devices Battery charge level indicators and local charge display Overheating protection for reliable operation Convenient mounting options with hot shoe mount and 1/4"-20 thread What makes this product special The Godox PB1000 Power Pack combines high energy capacity with a portable and space-saving design. Depending on the flash model used, the battery allows for up to 700 to 2,600 full-power flashes. With its USB-C port, status indicators, and flexible mounting options, the PB1000 is designed for practical use in everyday photography. Compatibility The Godox PB1000 is compatible with many hot-shoe flashes from Godox, Canon, Nikon, and Sony. A separately available cable is required for connection: CX cable for compatible Godox and Canon flash models NX cable for compatible Nikon flash models SX cable for compatible Sony flash models Technical Details Battery technology: Lithium Battery capacity: 3300 mAh / 47.52 Wh Charging time: approx. 2.5 hours with optional 30 W PD adapter Flash recycle time: 1 second Number of flashes: 700 to 2,600 Output: 1× Flash power connection Output via aviation connector: 300 V USB-C input/output: 5 to 20 V LED power indicator: Multiple On/Off Switch Detection and Operating Status Overheating protection Dimensions: 14.3 × 4.39 × 4.39 cm Weight: 344 g Package Contents 1× Godox PB1000 battery grip for clip-on flashes Conclusion The Godox PB1000 Power Pack battery grip offers photographers a practical way to use compatible clip-on flashes longer and faster. The powerful lithium-ion battery, short charging time, and compact design make the PB1000 a versatile power solution for mobile photography assignments. Frequently Asked Questions about the Godox PB1000 Power Pack Which flash units are compatible with the Godox PB1000 Power Pack?+ The Godox PB1000 is compatible with many flash units from Godox, Canon, Nikon and Sony. A separately available CX, NX or SX cable is required for connection. How many flashes does the Godox PB1000 provide on one battery charge?+ The PB1000 provides 700 to 2600 full-power flashes depending on the flash model. How quickly does the Godox PB1000 Power Pack recharge a flash unit?+ The PB1000 provides flash recycling times of up to 1 second.
CHF 118.00*
Only 3 available
SmallRig Hot Shoe Cover for Sony Set of 2
SmallRig Hot Shoe Cover for Sony Cameras in a Convenient 2-Pack The SmallRig hot shoe cover for Sony reliably protects your camera’s sensitive hot shoe contacts from dust, dirt, and light rain. Especially during outdoor use, it helps keep the hot shoe clean and protects it from unnecessary damage. Thanks to its easy installation, the cover is ready for use in no time. Who is it for The hot shoe cover is suitable for photographers and videographers who use their camera regularly and value the protection of their equipment. It is particularly practical for outdoor photography, travel, reporting, and everyday use. What makes this product special The two-layer design ensures a secure fit in the hot shoe and minimizes the risk of it falling out accidentally. At the same time, the cover protects the hot shoe from scratches and everyday wear and tear. The combination of PC, TPE, and silicone offers a pleasant feel and reliable protection for outdoor use. Compatibility Sony Alpha 1 Sony Alpha 1 II Sony Alpha 9 III Sony Alpha 7 IV Sony Alpha 7 V Sony Alpha 7R V Sony Alpha 7S III Sony Alpha 7R IV Note: The hot shoe cover cannot be used with a camera cage. Technical Details Color: BlackMaterial: PC, TPE, SiliconeProduct Dimensions: 32.7 × 28.4 × 8.4 mmProduct weight: 4.0 g Package contents 2x SmallRig hot shoe cover for Sony Conclusion The SmallRig hot shoe cover for Sony is a simple and effective solution for protecting the camera's hot shoe. It provides reliable protection against dust, dirt, and light rain, fits securely on the camera, and can be quickly attached or removed at any time. A useful addition for anyone who wants to protect their Sony camera in the long term. Frequently Asked Questions Which Sony cameras are compatible with the SmallRig hot shoe cover?+ The cover is compatible with Sony Alpha 1, 1 II, 9 III, 7 IV, 7 V, 7R V, 7S III and 7R IV. What is the purpose of the SmallRig hot shoe cover?+ It protects the camera hot shoe contacts from dust, dirt, scratches and light rain. Can the hot shoe cover be used together with a camera cage?+ No. The hot shoe cover cannot be used together with a camera cage.
CHF 18.00*
Godox iT30Pro TTL Mini Flash Leica silver
You do not want to travel with a bulky system flash, but the built-in flash of your Leica is not enough. The iT30Pro is a full TTL flash in a mini format, one you barely notice in your bag yet that has radio, does TTL and syncs up to 1/8000 s. Compact TTL flash for Leica cameras Guide number 15 (ISO 100, 105 mm), TTL and HSS up to 1/8000 s Built-in Godox 2.4 GHz X radio system, as transmitter or receiver USB-C for fast charging and firmware updates Full feature set in a mini format TTL and HSS for spontaneous shots The Leica TTL automatic sets the flash exposure for you, and HSS up to 1/8000 s lets you shoot wide open even in sun. You are ready at once for reportage and street. Part of the Godox X system Through the built-in 2.4 GHz radio the iT30Pro triggers other Godox flashes or is fired by radio itself. The small flash grows into a larger lighting setup. How this works in practice Travel and street The iT30Pro fits in a jacket pocket and turns the built-in flash replacement into a flexible tool with a tilting head for bounced light. What you should know before you order For Leica cameras only This version is matched to the TTL standard of Leica. On another camera system the TTL automatic will not work as intended. The list of Leica cameras tested by Godox can be found here A travel and fill flash, not a studio flash At guide number 15 the iT30Pro is made for fill, reportage and close range. For strong light over long distance or against the sun outdoors you need a more powerful flash. Technical details at a glance Guide number: 15 (ISO 100, 105 mm) Modes: TTL, manual, multi HSS: up to 1/8000 s Radio: Godox 2.4 GHz X, transmitter and receiver Connection: USB-C Colour: silver Compatible with: Leica (standard hot shoe) Scope of delivery 1 x Godox iT30Pro flash
CHF 99.00*
Godox iT30Pro TTL Mini Flash Leica black
You do not want to travel with a bulky system flash, but the built-in flash of your Leica is not enough. The iT30Pro is a full TTL flash in a mini format, one you barely notice in your bag yet that has radio, does TTL and syncs up to 1/8000 s. Compact TTL flash for Leica cameras Guide number 15 (ISO 100, 105 mm), TTL and HSS up to 1/8000 s Built-in Godox 2.4 GHz X radio system, as transmitter or receiver USB-C for fast charging and firmware updates Full feature set in a mini format TTL and HSS for spontaneous shots The Leica TTL automatic sets the flash exposure for you, and HSS up to 1/8000 s lets you shoot wide open even in sun. You are ready at once for reportage and street. Part of the Godox X system Through the built-in 2.4 GHz radio the iT30Pro triggers other Godox flashes or is fired by radio itself. The small flash grows into a larger lighting setup. How this works in practice Travel and street The iT30Pro fits in a jacket pocket and turns the built-in flash replacement into a flexible tool with a tilting head for bounced light. What you should know before you order For Leica cameras only This version is matched to the TTL standard of Leica. On another camera system the TTL automatic will not work as intended. The list of Leica cameras tested by Godox can be found here A travel and fill flash, not a studio flash At guide number 15 the iT30Pro is made for fill, reportage and close range. For strong light over long distance or against the sun outdoors you need a more powerful flash. Technical details at a glance Guide number: 15 (ISO 100, 105 mm) Modes: TTL, manual, multi HSS: up to 1/8000 s Radio: Godox 2.4 GHz X, transmitter and receiver Connection: USB-C Colour: black Compatible with: Leica (standard hot shoe) Scope of delivery 1 x Godox iT30Pro flash
CHF 107.00*
Godox iT30Pro TTL Mini Flash Olympus silver
You do not want to travel with a bulky system flash, but the built-in flash of your Olympus is not enough. The iT30Pro is a full TTL flash in a mini format, one you barely notice in your bag yet that has radio, does TTL and syncs up to 1/8000 s. Compact TTL flash for Olympus cameras Guide number 15 (ISO 100, 105 mm), TTL and HSS up to 1/8000 s Built-in Godox 2.4 GHz X radio system, as transmitter or receiver USB-C for fast charging and firmware updates Full feature set in a mini format TTL and HSS for spontaneous shots The Olympus TTL automatic sets the flash exposure for you, and HSS up to 1/8000 s lets you shoot wide open even in sun. You are ready at once for reportage and street. Part of the Godox X system Through the built-in 2.4 GHz radio the iT30Pro triggers other Godox flashes or is fired by radio itself. The small flash grows into a larger lighting setup. How this works in practice Travel and street The iT30Pro fits in a jacket pocket and turns the built-in flash replacement into a flexible tool with a tilting head for bounced light. What you should know before you order For Olympus cameras only This version is matched to the TTL standard of Olympus. On another camera system the TTL automatic will not work as intended. A travel and fill flash, not a studio flash At guide number 15 the iT30Pro is made for fill, reportage and close range. For strong light over long distance or against the sun outdoors you need a more powerful flash. Technical details at a glance Guide number: 15 (ISO 100, 105 mm) Modes: TTL, manual, multi HSS: up to 1/8000 s Radio: Godox 2.4 GHz X, transmitter and receiver Connection: USB-C Colour: silver Compatible with: Olympus (standard hot shoe) Scope of delivery 1 x Godox iT30Pro flash
CHF 74.00*
SMDV AD200Pro II Adapter for Flipbox
SMDV AD200Pro II Adapter – the direct connection between the Godox AD200Pro II and your SMDV Flipbox If you already own an SMDV Flipbox for hot-shoe flashes and want to switch to or add the Godox AD200Pro II, you need the right adapter. The SMDV AD200Pro II Adapter provides exactly this connection—precisely tailored, with no detours. Who is it for This adapter is designed for photographers who own an SMDV Flipbox for hot-shoe flashes and want to use it with a Godox AD200Pro II. It is the logical addition if you want to continue using your existing SMDV accessories without having to invest in a completely new system. Benefits at a Glance Perfect fit for the Godox AD200Pro II Compatible with the SMDV Flipbox for hot-shoe flashes Usefully complements existing SMDV accessories What makes this product special The SMDV AD200Pro II adapter is not a universal accessory, but a precisely tailored connecting element. It is designed exclusively for use with the Godox AD200Pro II and the SMDV Flipbox for clip-on flashes. This clear specialization ensures a reliable fit and a stable connection in daily use. Compatibility The adapter is compatible exclusively with the Godox AD200Pro II. It is not compatible with the Godox AD200Pro (older generation). It is also only suitable for the SMDV Flipbox for hot-shoe flashes—not for the larger Flip softboxes from SMDV. Technical Details The adapter is designed for attachment to the SMDV Flipbox for clip-on flashes and connection to the Godox AD200Pro II. No further verified technical specifications are available. Contents of the package 1 x SMDV adapter for Godox AD200Pro II Conclusion If you want to use your SMDV Flipbox for hot-shoe flashes with the Godox AD200Pro II, this adapter is the only right choice. Simple to use, precise fit—and a worthwhile investment that enhances your existing equipment. Frequently Asked Questions about the SMDV AD200Pro II Adapter Does the SMDV adapter also fit the older Godox AD200Pro? + No. The adapter has been developed exclusively for the Godox AD200Pro II and does not fit the older AD200Pro generation. Can the adapter be used with the larger SMDV Flip Softboxes? + No. The adapter is designed only for the SMDV Flipbox for speedlights and is not compatible with the larger Flip Softboxes from SMDV. What is included in the package? + The package includes 1 x SMDV adapter for the Godox AD200Pro II.
CHF 48.00*
SMDV Flip Softbox The Perfect Choice For Photographers
SMDV Flip Softbox: The Perfect Choice for Photographers The SMDV Speedbox-Flip G is an octagonal softbox for on-camera flashes that combines soft, even light with compact dimensions. It was developed for photographers who need professional-quality lighting even outside the studio—without sacrificing mobility.
From CHF 155.00*
Hot Shoe Cover for Ricoh GR IV
JJC hot shoe cover for Ricoh GR IV This perfectly fitting hot shoe cover reliably protects the hot shoe of your Ricoh GR IV from dust, dirt, and moisture. Ideal for photographers who want to protect their camera while on the go. The hot shoe cover from JJC is precisely tailored to the Ricoh GR IV and can be installed in seconds. It sits firmly in the hot shoe without wobbling or interfering with the camera's operation. The robust plastic material ensures a long service life and effectively protects the sensitive contacts in everyday use, when traveling, or during outdoor shoots. Thanks to its discreet design, the cover blends seamlessly into the camera body and maintains the high-quality look of your camera. A simple but effective solution to prevent damage and malfunctions. Special features and advantages Effective protection against dust, dirt, and moisture Precise fit for a secure hold without play Quick assembly and disassembly Lightweight, durable material Unobtrusive, camera-friendly design Compatibility Ricoh GR IV Technical details Material: High-quality plastic Color: Black Mounting: Plug-in system in the hot shoe Weight: approx. 1 g Dimensions: fits Ricoh GR IV hot shoe perfectly Scope of delivery 1x JJC hot shoe cover for Ricoh GR IV
CHF 12.00*
SMDV Grid for FLIP Nemo 50x70
SMDV Grid for FLIP Nemo 50 x 70: Precise light control for professional results The SMDV Grid for FLIP Nemo 50 x 70 is a high-quality honeycomb grid attachment that was specially developed for the FLIP Nemo softbox in the size 50 x 70 cm. It specifically reduces stray light and allows you to precisely control the light, making it ideal for portrait, product, and studio photography. This allows you to highlight your subjects with pinpoint accuracy and avoid unwanted light reflections in the background. The grid is easily attached to the appropriate softbox with Velcro and fits securely and precisely. The honeycomb structure concentrates the light without affecting the soft characteristics of the softbox. This creates high-contrast, controlled lighting with a professional look. Highlights: Precise light control without harsh shadows Reduction of stray light and light loss Quick installation thanks to Velcro system Compact, lightweight design Ideal for studio and on-location use. Special features and advantages: Compared to standard diffusers, the grid offers significantly more control over the light angle. You can illuminate only the subject while keeping the background darker. This is particularly advantageous for low-key shots, business portraits, or product shoots. The flexible material is easy to transport and can be stored in a space-saving manner—perfect for mobile photographers. Compatibility SMDV FLIP Nemo Softbox 50 × 70 cm Technical details Product type: Honeycomb grid Size: 50 × 70 cm Material: Lightweight, durable fabric Fastening: Velcro fastener Color: black Weight: very light, ideal for transport Scope of delivery: 1 × SMDV Grid for FLIP Nemo 50 × 70 cm
CHF 45.00*
Godox V1 mid Flash with Li-Ion battery
Godox V1 Mid – powerful clip-on flash for creative photography The Godox V1 Mid is a compact, powerful flash that provides you with even lighting conditions and professional results. Ideal for portrait, event, or product photography, it enables creative lighting design with minimal effort. The Godox V1 Mid impresses with its round flash head for soft, natural-looking light. Thanks to its modern lithium-ion battery, you benefit from fast recharge times and long-lasting performance.
From CHF 154.00*
Godox TTL Receiver X-System Sony
Godox TTL Receiver X-System Sony – Your wireless TTL receiver for creative flash photography. With this receiver, you can control your Godox flashes precisely and flexibly directly from your Sony camera – perfect for studio and outdoor shoots.& nbsp;The Godox TTL Receiver X-System for Sony is the ideal addition for photographers who want full control over their flash units. The receiver wirelessly receives TTL signals from Godox X-System transmitters and enables precise triggering and adjustment of flash power and exposure. Thanks to state-of-the-art radio technology, you can work reliably at distances of up to 100 meters. Special features and advantages With the Godox TTL Receiver X-System for Sony, you benefit from advanced control options: You can adjust individual flashes or groups independently without interrupting the shoot. Compared to older models, this device offers: Greater range and more stable radio connection Faster synchronization and shorter trigger times Full compatibility with TTL functions Wireless control of your Godox flashes via the X-System The receiver is specially designed for Sony cameras with compatible flash systems, including: Sony Alpha series (e.g., A7, A9, A6000 series) Full-frame and APS-C models Technical details Radio range: up to 100 m Frequency: 2.4 GHz Dimensions: 54 x 43 x 41 mm Weight: 65 g Connections: USB-C, Sync 2.5 mm Scope of delivery 1x Godox TTL receiver X-System Sony USB-C cable Sync cable
CHF 45.00*
Godox TTL Receiver X-System for Canon and Nikon
Godox TTL Receiver X-System for Canon and Nikon – Your wireless TTL receiver for creative flash photography. With this receiver, you can control your Godox flashes precisely and flexibly directly from your Canon or Nikon camera – perfect for studio and outdoor shoots. The Godox TTL Receiver X-System for Canon or Nikon is the ideal addition for photographers who want full control over their flash units. The receiver wirelessly receives TTL signals from Godox X-System transmitters and enables precise triggering and adjustment of flash power and exposure. Thanks to state-of-the-art radio technology, you can work reliably at distances of up to 100 meters. Special features and advantages With the Godox TTL Receiver X-System for Canon and Nikon, you benefit from advanced control options: You can adjust individual flashes or groups independently without interrupting the shoot. Compared to older models, this device offers: Greater range and more stable radio connection Faster synchronization and shorter trigger times Full compatibility with TTL functions Wireless control of your Godox flashes via the X-System The receiver is designed for Canon or Nikon cameras with compatible flash systems, including: Canon EOS DSLR and mirrorless cameras (e.g., 5D, R series, EOS series) Nikon SLR and Z series cameras Technical details Radio range: up to 100 m Frequency: 2.4 GHz Channels: 32 Groups: A-E Dimensions: 54 x 43 x 41 mm Weight: 65 g Connections: USB-C, Sync 2.5 mm Scope of delivery 1x Godox TTL Receiver X-System for Canon and Nikon 1x Godox TTL receiver X-system for Canon and Nikon USB-C cable Sync cable Scope of delivery 1x Godox TTL receiver X-system for Canon and Nikon USB-C cable Sync cable 2.5mm to 3.5mm
CHF 45.00*
SmallRig Hot Shoe Cover for Sony Black 2pcs. 5494
SmallRig hot shoe cover for Sony in gray, 2 pcs. The SmallRig hot shoe cover reliably protects the hot shoe of your Sony camera from dust, dirt, and moisture. At the same time, it gives your camera a discreet, professional look. Ideal for photographers and videographers who value protection and design. The SmallRig hot shoe cover was specially designed for Sony cameras with a multi-interface shoe. It fits perfectly in the hot shoe and effectively protects the sensitive contacts in everyday use, when traveling, or during outdoor shoots. The high-quality plastic material ensures durability and a pleasant feel. The gray color makes it a perfect match for modern Sony camera bodies and SmallRig accessories. Special features and advantages Reliable protection of the hot shoe against dust and moisture Precise fit for a secure hold without play High-quality plastic construction for long life Set of two covers, ideal as a replacement or for multiple cameras Compatibility Sony Alpha 1 / 1 II / 9 III / 7 IV / 7 V / 7R V / 7S III / 7R IV Technical details Material: Plastic and silicone Color: Gray Mount: Hot shoe (multi-interface shoe) Weight: approx. 5 g per piece Dimensions: Camera-specific Scope of delivery 2 x SmallRig hot shoe cover for Sony, gray
CHF 12.00*
SmallRig Hot Shoe Cover for Sony Black 2pcs. 5494
SmallRig hot shoe cover for Sony in black, 2 pcs. The SmallRig hot shoe cover reliably protects the hot shoe of your Sony camera from dust, dirt, and moisture. At the same time, it gives your camera a discreet, professional look. Ideal for photographers and videographers who value protection and design. The SmallRig hot shoe cover was specially designed for Sony cameras with a multi-interface shoe. It fits perfectly in the hot shoe and effectively protects the sensitive contacts in everyday use, when traveling, or during outdoor shoots. The high-quality plastic material ensures durability and a pleasant feel. The black color makes it a perfect match for modern Sony camera bodies and SmallRig accessories. Special features and advantages Reliable protection of the hot shoe against dust and moisture Precise fit for a secure hold without play High-quality plastic construction for long life Set of two covers, ideal as a replacement or for multiple cameras Compatibility Sony Alpha 1 / 1 II / 9 III / 7 IV / 7 V / 7R V / 7S III / 7R IV Technical details Material: plastic and silicone Color: black Mounting: hot shoe (multi-interface shoe) Weight: approx. 5 g per piece Dimensions: Camera-specific Scope of delivery 2 x SmallRig hot shoe cover for Sony, black
CHF 12.00*
Temporarily Out of Stock
Godox GAC-IC13 hot shoe extension cable
Godox GAC-IC13 Multi-Interface Hot Shoe Extension Cable The Godox GAC-IC13 Multi-Interface Hot Shoe Extension Cable from Godox gives you more flexibility when positioning your flash. You can detach compatible system flashes from the camera hot shoe and still use all the important control functions. It is ideal for creative lighting in the studio or on location. The GAC-IC13 is a high-quality extension cable for multi-interface hot shoes. It reliably transmits TTL signals and other flash information between the camera and flash. The stable plug connection ensures secure communication even when moving. The cable is particularly suitable for photographers who want to use their flash off-camera without sacrificing automatic functions. Special features and advantages More freedom in lighting design thanks to external flash position Reliable signal transmission for TTL and synchronization Robust construction for regular use Easy to use without additional power supply A sensible alternative to radio systems in environments with sources of interference Compared to simple sync cables, the GAC-IC13 enables advanced communication between the camera and flash. Compatibility Sony cameras with multi-interface hot shoe Godox system flashes with matching connector Selected flash units from other manufacturers with multi-interface support Technical details: Connection: Multi-interface hot shoe Cable length: approx. 0.5 m Signal transmission: TTL, flash synchronization Power supply: via camera Color: black Scope of delivery: Godox GAC-IC13 multi-interface hot shoe extension cable
CHF 59.00*
Finding the Right Clip-On Flash
A clip-on flash fits into your camera’s hot shoe and provides light exactly when you need it. Compared to the built-in flash, you get significantly more power, a shorter recharge time, and—most importantly—the ability to swivel and tilt the flash head. That’s exactly the key point: If you bounce the flash off the ceiling instead of aiming it directly at the subject’s face, you’ll get soft, natural light instead of harsh shadows.
Is the flash compatible with your camera?
Clip-on flashes are built for specific camera systems. The contacts in the hot shoe differ between Canon, Nikon, Sony, Fujifilm, Olympus, and Panasonic. Therefore, when purchasing, make sure to choose the correct version for your camera mount—usually identified by an abbreviation in the product name, such as C for Canon, N for Nikon, S for Sony, or F for Fujifilm. Purely manual flashes without data transmission, on the other hand, work with almost any camera that has a standard hot shoe.
TTL, HSS, and Manual Mode
In TTL mode, the camera measures the light through the lens and automatically adjusts the flash output. This is handy when you need to work quickly and the lighting conditions are constantly changing, such as at a wedding or an event. In manual mode, you set the power yourself, usually in steps ranging from full power down to a fraction of that. This ensures the result remains exactly the same from shot to shot, which is a major advantage in the studio and for product photography.
HSS stands for High Speed Sync and removes the limitation on the flash sync speed. Without HSS, depending on your camera, you’re limited to around 1/200 s. If you want to shoot with a wide aperture in sunlight and keep the background blurred, you’ll need faster shutter speeds—and therefore HSS. For outdoor portraits, this feature is practically indispensable.
Off-Camera Flash with a Radio Trigger
Flash photography gets really interesting as soon as the flash leaves the camera. A radio trigger mounted on the hot shoe controls one or more flashes in the room, giving you complete freedom to determine the direction and character of the light. Godox uses its unified X-System for this, which controls everything from small clip-on flashes to large battery-powered flashes using the same trigger. You can conveniently adjust the power and mode on the transmitter without having to walk over to the flash.
Clip-on flash or battery-powered flash?
A hot-shoe flash is compact, runs on batteries or a small rechargeable battery, and fits in any camera bag. It’s the obvious choice for on-the-go shooting, photojournalism, and fill-in flashes. A battery-powered flash like the AD series offers significantly more power and comes with a removable battery, but it’s designed to be mounted on a light stand rather than directly on the camera. As soon as you want to shoot into the sun or use large light modifiers, there’s no getting around a battery-powered flash.
Flash or continuous light?
Both have their place. Flash delivers a lot of energy in a split second, freezes motion, and cuts through even bright ambient light. Continuous light lets you see the result before you take the shot and is the only practical option for video. If you mainly take photos and are lighting people or products, you’re generally better off with a flash.
Shaping Light
The flash alone is just the light source; the light modifier determines the character of the light. A small softbox mounted on the clip-on flash makes the light noticeably softer; a reflector directs it precisely; honeycomb grids concentrate the beam; and color gels add accents to the background. Godox offers compatible clip-on adapters and an extensive range of accessories that can be combined with the product line from the photo studio.