Demo lens – lightly used, with original packaging and a 3-month warranty. Purchase date unknown. The standard zoom that gets everything right on video: the Fujinon MKX18-55mm T2.9 is the all-rounder cine lens from Fujifilm's MK series for X-mount – from wide angle to short telephoto, with a constant T2.9 aperture, a stepless iris and geared rings for focus, iris and zoom. The perfect partner to the MKX50-135mm telephoto zoom. Cine standard zoom 18–55 mm (27–84 mm full-frame equiv.) for Fujifilm X / Super 35 Constant T2.9 aperture across the whole zoom range Stepless (clickless) iris with 9 rounded blades Geared 0.8 MOD cine rings for focus, iris and zoom One lens for almost every shot Wide angle to portrait tele From a wide establishing shot to a flattering portrait frame, 18–55 mm covers the most-used range for documentary, event and interview work – with no lens change mid-scene. Constant exposure, follow-focus ready The aperture stays at T2.9 across the range, so there's nothing to re-balance as you zoom. The three geared rings sit in uniform positions for any standard follow focus, and the even focus throw allows precise rack focus with minimal focus breathing. Close focus for detail With a wide macro close-focus of 0.38 m you can get in tight for detail and insert shots – handy for product scenes and B-roll. What it looks like in real life Documentary shoot on the move On the gimbal you walk through the room at 18 mm for the wide, then push to 55 mm for your subject's face and pull focus cleanly by hand – one lens, one shoot, no exposure jumps. Good to know before you order Manual focus, Super 35 image circle A pure cine lens: manual focus, no autofocus. The image circle covers Super 35 / APS-C (Fujifilm X), not full frame. Weight and handling At around 1,100 g with geared rings, it belongs on a rig, gimbal or tripod. Factor in the weight for gimbals and balance carefully. Demo lens This is a lightly used demo lens with original packaging. Light signs of use are possible; 3-month warranty, purchase date unknown. Technical details at a glance Manufacturer: Fujifilm (Fujinon) Model: MKX18-55mm T2.9, X-mount Focal length: 18–55 mm (27–84 mm full-frame equiv.) Image circle: Super 35 / APS-C Aperture: constant T2.9 (max F2.8, min F22) Iris: stepless, 9 rounded blades Angle of view: 76.5° to 29.0° Minimum focus distance: 0.85 m (wide macro 0.38 m at the wide end) Filter thread: 82 mm Front diameter: 85 mm Dimensions: approx. 87 mm x 206.6 mm Weight: approx. 1,100 g (excl. accessories) What's in the box 1 x Fujinon MKX18-55mm T2.9 (demo) Tripod collar foot, support foot, zoom lever, front/rear caps, lens hood, wrapping cloth

New – single unit, ready to ship. Condition: [New]. Large video files, RAW bursts and whole project caches need both space and speed. The Samsung 970 EVO Plus with 2 TB is an NVMe M.2 SSD that delivers both: up to 3,500 MB/s read speed and plenty of capacity for big photo and video archives. Ideal as a fast system or scratch drive. 2 TB in the M.2 2280 form factor with NVMe (PCIe 3.0 x4) Sequential up to 3,500 MB/s read and 3,300 MB/s write Samsung TLC V-NAND rated for 1,200 TBW Around six times faster than a SATA SSD Speed for big files Faster editing, faster export Video editing and large RAW catalogues live and die by data rate. At up to 3,500/3,300 MB/s you copy big projects in seconds and work on timelines and previews without stutter. As a scratch disk for Premiere, DaVinci or Lightroom, the 970 EVO Plus shows its full strength. Lots of room to spare 2 TB hold thousands of RAWs or hours of 4K footage. The 1,200 TBW endurance keeps the drive dependable for years, even under heavy write loads. What it looks like in real life A second SSD for projects Fit the 970 EVO Plus as a second M.2 drive in your editing PC and keep active projects and caches on it. The system stays on the first SSD while project data runs smoothly on the second – no space crunch. Good to know before you order M.2 NVMe, PCIe 3.0 The drive needs a free M.2 slot with NVMe (PCIe) support. It won't work in a SATA-only M.2 slot. It uses PCIe 3.0 – it runs in a PCIe 4.0 board, but at PCIe 3.0 speed. Pre-owned – check the condition This is a pre-owned item. With a used SSD it's worth a quick look at the SMART values (remaining endurance); the exact condition is stated above. Back up your data before installing, as always. Technical details at a glance Manufacturer: Samsung Model: 970 EVO Plus, MZ-V7S2T0 Capacity: 2 TB Form factor: M.2 2280 Interface: PCIe 3.0 x4, NVMe 1.3 Sequential read/write: up to 3,500 / 3,300 MB/s Random (4K, QD32): up to 620,000 / 560,000 IOPS Memory: Samsung TLC V-NAND Controller: Samsung Phoenix Cache: 2 GB LPDDR4 Endurance: 1,200 TBW Dimensions: 80.15 x 22.15 x 2.38 mm, approx. 9 g What's Included 1 x Samsung 970 EVO Plus 2TB SSD (New) Some packaging is missing; see Image 3

New – single unit, ready to ship. Condition: New. Is your computer slow to boot and does Lightroom crawl? The Samsung 870 EVO with 1 TB is the easiest and cheapest upgrade: swap the old hard drive for this 2.5-inch SATA SSD and your laptop or desktop feels brand new. It's Samsung's best-selling SATA SSD, known for speed and longevity. 1 TB of storage in the 2.5-inch form factor (7 mm) – fits almost any laptop or desktop Sequential up to 560 MB/s read and 530 MB/s write Samsung TLC V-NAND rated for 600 TBW SATA III (6 Gb/s), backward compatible with older SATA ports The fastest upgrade for little money Old machine, new speed Swapping a spinning hard drive for an SSD makes an immediate difference: the computer boots in seconds, apps open without waiting, and even large photo catalogues stay responsive. For most older laptops and desktops it's the single most worthwhile upgrade. Built for the long haul With Samsung's V-NAND and a 600 TBW endurance rating, the 870 EVO is also a dependable home for backups and photo and video archives. The 1 GB cache keeps speeds high even with lots of small files. What it looks like in real life Lightroom on the old laptop Drop the SSD into your ageing laptop, reinstall the system and Lightroom, and suddenly import, previews and export are many times faster. No new computer needed – just an SSD. Good to know before you order SATA, not NVMe This is a 2.5-inch SATA SSD at around 550 MB/s – plenty for a huge everyday upgrade, but slower than an M.2 NVMe SSD. In return it fits practically any SATA port and couldn't be simpler to install. Pre-owned – check the condition This is a pre-owned item. With a used SSD it's worth a quick look at the SMART values (remaining endurance); the exact condition is stated above. As always, back up your data before installing. Technical details at a glance Manufacturer: Samsung Model: 870 EVO, MZ-77E1T0B/EU Capacity: 1 TB Form factor: 2.5-inch, 6.8 mm height Interface: SATA III (6 Gb/s) Sequential read/write: up to 560 / 530 MB/s Random (4K): up to 98,000 / 88,000 IOPS Memory: Samsung TLC V-NAND Controller: Samsung MKX Cache: 1 GB LPDDR4 Endurance: 600 TBW Dimensions: 100 x 69.85 x 6.8 mm, approx. 50 g What's in the box 1 x Samsung 870 EVO 1TB SSD (New)

Demo unit – checked and ready to ship. Condition: New Adapters, grids, diffusers, cables and small parts rattling around loose in your lighting case? This set of two SMDV storage bags brings order to your lighting gear: one large 40 cm bag and one small 26 cm bag, so you find what you need right away on set. Set of 2 SMDV storage bags Large bag approx. 40 cm, small bag approx. 26 cm Keeps lighting and studio accessories organised CHF 30 per set – 6 sets available A tidy lighting kit Two sizes for different gear The large bag takes bulkier items, the small one is ideal for adapters, small parts or cables. Your gear is sorted sensibly instead of piled into one compartment. Protection from scratches and dust Packed items don't rub against each other and stay clean – a real plus for diffusers and modifiers when you are on the move a lot. How it works in practice Location shoot with speedlites Grids and diffuser go in the large bag, adapters and triggers in the small one. When setting up, you reach for the right bag instead of digging through your case. What to know before you order Bags only, no contents You get the two empty bags. Softboxes, adapters and other accessories are not included. Check the sizes The 40 cm and 26 cm figures refer to the bag size as listed by us. Check beforehand that your gear fits – we are happy to measure for you. Technical details at a glance Brand: SMDV Contents: 2 storage bags Large bag: approx. 40 cm Small bag: approx. 26 cm Material, closure, colour: Black Condition:  demo unit In the box 1 x large storage bag (approx. 40 cm) 1 x small storage bag (approx. 26 cm)

Pre-owned – checked and ready to ship. Condition: used / shows signs of wear. Does your ball head creep when you lock it down with a heavy lens? The Sunwayfoto XB-52 is a low-profile ball head with a 52 mm ball. It holds heavy bodies and telephoto lenses securely without adding much height. Its Arca-Swiss clamp takes the common quick release plates and L-brackets. 52 mm ball, rated up to 30 kg (manufacturer spec) Low-profile design: side-mounted lock lowers the centre of gravity by over 15 % Arca-Swiss compatible screw-knob clamp 360° panning base with scale, two drop notches Solid support for heavy gear Lower centre of gravity The lock sits on the side of the ball rather than underneath. That keeps the XB-52 low and the camera closer to the tripod, which gives you a steadier setup for long exposures and long lenses. No sag when you lock it The elliptical ball adds resistance the further you tilt, so the camera doesn't suddenly drop. The geared locking mechanism provides strong holding power. Panoramas and portrait orientation The base pans a full 360° with a scale for evenly overlapping panoramas. Two drop notches let you shoot in portrait orientation or tilt steeply. What it looks like in practice Landscape with a tele zoom and L-bracket You're shooting a mountain range at 100–400 mm with the camera on an L-bracket in the Arca clamp. For a panorama you only rotate the base and follow the scale. To switch to portrait, you flip the L-bracket instead of tilting the head. What you should know before you order No quick release plate included This unit comes without a quick release plate. You'll need an Arca-Swiss compatible plate or L-bracket for your camera or lens. Not a lightweight At 683 g the XB-52 is built for heavy gear. It's on the large side for a small travel tripod. 3/8" mounting thread The base has a 3/8" thread, which fits most photo tripods directly. Tripods with a 1/4" screw need a suitable adapter. Technical details Type: low-profile ball head Ball diameter: 52 mm Panning base diameter: 68 mm Height: 91 mm Weight: 683 g Max. load: 30 kg (manufacturer spec) Clamp: screw-knob, Arca-Swiss compatible Tripod mount: 3/8" female thread Panning: 360° with scale In the box 1 x Sunwayfoto XB-52 ball head with Arca-Swiss clamp No quick release plate

Demo unit – checked and ready to ship. Condition: New. Spending your days on calls, hosting a podcast or commentating streams – without wanting a boom arm, separate headphones and a tangle of cables on your desk? The RØDE NTH-100M pairs the closed-back NTH-100 studio headphones with the detachable NTH-Mic headset microphone. One cable, one solution: accurate monitoring in your ears and a clear voice right in front of your mouth. Closed-back NTH-100 over-ear headphones: 40 mm drivers, 5 Hz – 35 kHz, 32 ohms Detachable NTH-Mic headset mic (omni, 20 Hz – 20 kHz) with locking connector Alcantara cushions with CoolTech gel and FitLok headband lock for long sessions Modular design: cushions, cables and mic are user-replaceable Sound better without growing your setup Consistent levels, every time With a desk mic, your level changes every time you move your head. The NTH-Mic stays at a fixed distance from your mouth – ideal for remote interviews, live hosting or gaming streams. RØDE also highlights its plosive rejection. Real studio headphones underneath The NTH-100 are fully fledged studio headphones with accurate response and low distortion. Pop off the mic and you have closed-back cans for editing, on-set monitoring or music. RØDE quotes around 20 dBA of ambient noise attenuation. Comfortable for hours Alcantara cushions with CoolTech gel keep heat down, and FitLok locks the headband in your preferred position so you don't readjust every time. What it looks like in practice Interview in the morning, edit in the afternoon Record a video-call interview with the NTH-100M connected via the included splitter to your computer's separate headphone and mic jacks. Later, unplug the mic and cut the footage with the same headphones. Good to know before you order Analog 3.5 mm, not USB The headset uses a 3.5 mm TRRS cable; a splitter is included for devices with separate jacks. There is no direct USB or XLR connection – you will need a suitable interface or adapters, which are not included. Only the TRRS cable carries the mic RØDE's coloured NTH-Cables are TRS cables and, according to RØDE, not compatible with the NTH-100M / NTH-Mic. Always use the supplied TRRS cable for mic use. Not a featherweight, omni mic The headphones weigh about 350 g. The omnidirectional mic picks up more room sound in noisy environments than a directional mic would. Technical details at a glance Headphones: NTH-100, dynamic, closed-back, circumaural Driver: 40 mm Frequency response (headphones): 5 Hz – 35 kHz Impedance: 32 ohms Sensitivity: 110 dB/V Max. input power: 1700 mW (1% THD @ 1 kHz) Ambient noise attenuation: approx. 20 dBA Headphone weight: approx. 350 g Microphone: NTH-Mic, omnidirectional, 20 Hz – 20 kHz Mic SNR: 67 dB, self-noise 27 dBA (typ.) Mic weight: approx. 5 g Connection: 3.5 mm TRRS, 2.4 m cable In the box 1 x RØDE NTH-100 headphones 1 x RØDE NTH-Mic headset microphone 1 x 2.4 m TRRS cable 1 x splitter cable (headphone / mic) 1 x 3.5 mm to 6.35 mm adapter 1 x COLORS ID set 1 x storage pouch

Demo unit – checked and ready to ship. Condition: Neu. Without a wall socket, LED lights and video cameras don't run for long. The Jinbei FB-VLB-220W is a large 220 Wh V-mount battery that keeps V-mount lights and cameras going for a long time. Its D-Tap and USB outputs also power a monitor, phone or wireless kit. 220 Wh capacity at 14.8 V V-mount connection for lights, cameras and adapter plates Extra outputs: D-Tap and USB LED charge indicator Power for long shoot days Plenty of reserve on set With 220 Wh you can run a mid-sized LED light or a video camera for hours. Exact runtime depends on your device's power draw. Divide 220 Wh by your device's wattage for a rough estimate. Several devices on one battery Plug a monitor or wireless receiver into the D-Tap output and charge your phone or a mic system over USB. That means fewer separate batteries to manage. Fits the Jinbei system The battery works with the Jinbei EF-VM V-mount adapter, so you can run compatible Jinbei EF LED lights off-grid. What it looks like in practice Outdoor interview An LED light with a V-mount plate stands at the edge of the forest, the battery on its back. The D-Tap output powers your camera monitor at the same time. You get through the whole afternoon without a cable or socket. What you should know before you order Not allowed on planes At 220 Wh this battery is above the 160 Wh limit. Passengers may not carry lithium batteries over 160 Wh in carry-on or checked luggage. For air travel you need batteries up to 99 Wh (or up to 160 Wh with airline approval). Charger not included You need a V-mount charger for 14.8 V batteries. Chargers for 26 V batteries (such as the Jinbei RL-26V) are not suitable. Big and heavy At about 1.2 kg the battery is meant for lights and shoulder or studio rigs, not a lightweight gimbal setup. Technical details Model: FB-VLB-220W (Jinbei / FB) Type: lithium-ion battery, V-mount Nominal voltage: 14.8 V Energy: 220 Wh Outputs: V-mount, D-Tap, USB Max. output: 240 W (retailer spec) Indicator: LED charge level Dimensions: approx. 14.5 x 9.6 x 6.4 cm Weight: approx. 1.16–1.2 kg In the box 1 x Jinbei FB-VLB-220W V-mount battery

Demo unit – checked and ready to ship. Condition: New. Shooting reels, interviews or livestreams on your phone, and the built-in mic sounds like a train station from two metres away? The Godox Cube-SC Kit2 combines two 7 g transmitters with a USB-C receiver that plugs straight into your phone – all carried in a lipstick-sized charging case. 2 transmitters + 1 plug-in USB-C receiver, 2.4 GHz, up to 300 m (line of sight) Transmitters weigh just 7 g, 75 dB SNR, max. 115 dB SPL Approx. 10 h per charge, approx. 30 h with the charging case Double-click remote for record/snap and one-press noise reduction Plug in, clip on, record No cables, no fiddling Plug the Cube-SC RX into the USB-C port of your phone, tablet or computer, clip on the transmitters with a magnet or clip, and you're ready for clean audio on social clips, interviews or livestreams. Control without walking back to the phone Double-click a transmitter to start recording or snap a photo on your phone – from up to 50 m away. Noise reduction is also one press away on the transmitter. Fine-tune in the app The Godox Mic app gives you real-time monitoring, volume, dual-mode noise reduction, speaker playback and firmware updates. What it looks like in practice Two-person interview for social media Plug the receiver into your phone, give each person a transmitter and double-click to start recording. Afterwards, everything goes back into the case to charge for the next job. Good to know before you order USB-C devices only The receiver has only a USB-C plug – no 3.5 mm output – so it won't work with cameras that lack USB audio. For Lightning iPhones, there's the Cube-SL version. Cases and rigs Depending on your phone case or rig, the plug-in receiver may be blocked – check that the USB-C port is freely accessible. About 10 hours per transmitter The 30-hour total requires recharging in the case (roughly two full charges for two transmitters). Technical details at a glance Transmission: 2.4 GHz frequency hopping, up to 300 m (line of sight) Cube-S TX transmitter: omni, 20 Hz – 20 kHz, max. 115 dB SPL, 86 dB dynamic range, 75 dB SNR Sample rate: 48 kHz / 24-bit Transmitter: 3.87 V / 97 mAh, approx. 10 h, approx. 1.5 h charge, approx. 7 g Cube-SC RX receiver: USB-C plug, powered by host device, 75 dB SNR, approx. 5 g Charging case: 3.8 V / 850 mAh, charges 2 devices about twice, approx. 2 h charge, approx. 49 g App: Godox Mic Operating temperature: -10 °C to +50 °C In the box 2 x Cube-S TX transmitters 1 x Cube-SC RX receiver (USB-C) 1 x charging case 2 x magnetic clips 4 x magnets 2 x furry windscreens 2 x lanyards 1 x USB-A to USB-C data cable 12 x transmitter stickers 1 x pin 1 x storage case

Demo unit – checked and ready to ship. Condition: New. Two people, one camera – and you still want clean audio without cables across the room? The Godox Magic XT1 Combo includes two clip-on transmitters and a receiver with an OLED touchscreen, and the transmitters charge and store inside the receiver itself. With cables for cameras, USB-C and Lightning devices, you're set for interviews, vlogs and livestreams. 2 transmitters + 1 receiver, 2.4 GHz, up to 200 m range (line of sight) 48 kHz / 24-bit, mono, stereo and safety track (-6 dB) modes Receiver with OLED touchscreen, noise reduction and 150 Hz low-cut Transmitters charge inside the receiver: up to approx. 16 h receiver runtime Two voices, cleanly separated and protected Stereo for editing, safety track against clipping In stereo mode, each speaker lands on their own channel – ideal for interviews you want to mix individually later. Safety track mode records an extra channel 6 dB lower, so a sudden laugh doesn't ruin your take. Everything at a glance on the receiver Use the OLED touchscreen to switch modes, adjust each transmitter's volume in 10 steps and enable noise reduction or low-cut. Monitor live via the 3.5 mm headphone jack. Compact and always charged The transmitter-in-receiver design means both transmitters go back into the receiver after the shoot, where they charge and stay protected. Fewer loose parts in your bag. What it looks like in practice Interview on camera, podcast on the laptop Clip the transmitters magnetically to two people and mount the receiver in the camera's shoe. For a podcast recording on your laptop, connect the same receiver via USB-C – it shows up as an audio device (UAC). Good to know before you order Transmitter runtime around 8 hours Godox rates the transmitters at about 8 hours and the receiver at around 16 hours. Plan charging breaks for all-day events – the transmitters recharge in the receiver in about 2 hours. No onboard recording listed Godox does not list internal backup recording for the XT1 transmitters, so the safety track is your main protection – not a recorder in the transmitter. Omnidirectional mics The built-in mics pick up sound from all directions. In very loud environments, place the transmitters close to the mouth and use noise reduction. Technical details at a glance Transmission: 2.4 GHz frequency hopping Range: up to 200 m (line of sight) Pickup pattern: omnidirectional Frequency range: 20 Hz – 20 kHz Max. SPL: 115 dB Sample rate: 48 kHz / 24-bit SNR: approx. 70 dB Modes: mono, stereo, safety track (-6 dB) Noise reduction (DNR), 150 Hz low-cut, 10-step volume Transmitter battery: 3.8 V / 80 mAh, approx. 8 h runtime, approx. 2 h charge Receiver battery: 3.8 V / 680 mAh, approx. 16 h (with two transmitters), approx. 2.5 h charge Receiver connections: 3.5 mm output, 3.5 mm headphone jack, USB-C (UAC) Weight: transmitter approx. 8 g (without magnetic button), receiver approx. 50 g Operating temperature: -10 °C to +50 °C In the box 1 x Magic XT1 receiver 2 x transmitters 2 x magnetic back clips 4 x magnetic back buttons 2 x furry windscreens 1 x USB-A to USB-C data cable 1 x 3.5 mm TRS to TRS cable 1 x 3.5 mm TRS to USB-C adapter cable 1 x 3.5 mm TRS to Lightning adapter cable 1 x cold shoe base 1 x storage case

Demo unit – checked and ready to ship. Condition: New. A shoulder strap is often overkill for a small camera – but going without any security doesn't feel right either. The PGYTECH Camera Wrist Strap keeps your camera on your wrist, clicks on and off one-handed and turns into a bracelet thanks to a hidden magnetic clasp. In Oak Grey. Wrist strap with quick connector, one-handed attach and release Rated up to 55 kg by PGYTECH, Dyneema core Soft microfibre surface, aluminium slider to tighten Hidden magnetic clasp – wear it as a bracelet Secure in hand, quick to swap One-handed on and off The connectors stay on the camera and the strap just clicks in, so you can swap quickly between wrist strap and a shoulder strap on the same system. Snug on your wrist The anodised aluminium slider tightens the loop around your wrist, so the camera can't slip away while you shoot fast. Built-in wear indicator Like PGYTECH's shoulder strap, the loop has a three-layer construction: once the yellow layer shows, it's time for a replacement. What it looks like in real life Street and travel Wandering the old town with a compact mirrorless in hand and the loop around your wrist. At the café you unclip it and simply keep wearing the strap as a bracelet. Good to know before you order Best for smaller cameras A wrist strap doesn't carry weight for hours – for heavy bodies with big lenses, a shoulder strap is more comfortable. Proprietary connector system The quick connectors are PGYTECH's own system and not officially compatible with other brands. Pre-owned This is a pre-owned / demo item. Light signs of use are possible; see the condition stated above. Technical details at a glance Manufacturer: PGYTECH Model: Camera Wrist Strap, Oak Grey (P-CB-127) Dimensions: 230 x 25 mm Weight: 34 g Materials: microfibre, Dyneema, fibre-reinforced nylon Load capacity: up to 55 kg (manufacturer rating) Closure: dead-centre locking quick connector, magnetic clasp What's in the box 1 x PGYTECH Camera Wrist Strap, Oak Grey 2 x quick release beads 1 x metal adapter ring

Demo unit – checked and ready to ship. Condition: New. Pressing the shutter button by hand adds blur to long exposures, macro shots and time-lapses – and a cable release keeps you tied to the tripod. The Godox TR-C1 is a wireless timer remote made up of a transmitter and a receiver: fire the camera from up to 100 m away and program delay, exposure time and intervals right on the transmitter. This version fits Canon cameras with a 2.5 mm remote port (type C1). Transmitter + receiver, 2.4 GHz wireless, up to 100 m range (manufacturer spec) Timer functions: shutter delay, exposure duration (bulb), interval, number of shots For Canon with 2.5 mm port plus selected Pentax, Samsung and Contax models C1 release cable (2.5 mm) for the receiver included Sharp shots without touching the camera No more camera shake Because you never touch the camera, there is no vibration from pressing the shutter. With long exposures, long telephoto lenses and macro work, that is the difference between tack-sharp and slightly soft. Program time-lapses and long exposures Set shutter delay, exposure duration, interval and number of shots on the transmitter – even in groups with pauses in between. Your time-lapse or bulb series then runs on its own. Wireless instead of a cable Godox rates the radio link at up to 100 m. Wait in the car while the camera shoots the night sky, or step into the frame and trigger from a distance. What it looks like in practice Sunset time-lapse Camera on the tripod, receiver plugged into the remote port: set an interval of a few seconds and the number of frames, press start – and enjoy the evening. Long exposure by the water With an ND filter and bulb mode you can expose for minutes. Set the duration on the transmitter instead of timing it on your phone. What to know before you order Only for cameras with a 2.5 mm port (C1) The TR-C1 comes with the Canon 2.5 mm jack cable. Cameras with the round three-pin port (e.g. Canon EOS 5D and 1D series) need a different version. Check which port your camera has before ordering – the official compatibility list is below. Batteries Transmitter and receiver run on batteries rather than a built-in rechargeable cell. Keep spares at hand for long time-lapse sessions. Pre-owned – what's included This is a pre-owned unit; see "In the box" for accessories and packaging. Technical details at a glance Type: wireless timer remote, transmitter (TR-TX) and receiver (TR-RX) Wireless: 2.4 GHz Range: up to 100 m (manufacturer spec) Functions: shutter delay, exposure duration, interval, number of shots, group interval and repeats Camera connection: Canon C1, 2.5 mm jack (cable included) Compatible per Godox – Canon: 90D, 80D, 77D, 70D, 60D, 800D, 760D, 750D, 700D, 650D, 600D, 550D, 500D, 450D, 400D, 350D, 300D, 200D, 100D, 1500D, 1300D, 1200D, 1100D, 1000D, G10, G11, G12, G15, G16, G1 X, SX70, SX60, SX50, EOS M6, M6 II, M5 Compatible per Godox – Pentax: K5, K7, K10, K20, K100, K200, K1, K3, K30, K10D, K20D, K50; Samsung: GX-1L, GX-1S, GX-10, GX-20, NX100, NX11, NX10, NX5; Contax: 645, N1, NX, N Digital In the box 1 x Godox TR-TX wireless timer transmitter 1 x Godox TR-RX receiver 1 x C1 release cable (2.5 mm)

Demo unit – checked and ready to ship. Condition: New. Does your DSLR or mirrorless camera's built-in audio sound hollow and pick up lens noise? The Godox IVM-S2 is a compact on-camera shotgun mic for the hot shoe. With a cardioid pattern, two low-cut settings and three-step gain, it brings voices forward – and runs for weeks on a single AA battery. Cardioid pattern focuses on the voice in front of the camera Low-cut 75 / 150 Hz and gain -10 / 0 / +10 dB Up to 21 days of operation on one AA battery Integrated shock mount, 67 g, TRS and TRRS cables included Clearer voices straight into the camera Filter out the noise The two-step low-cut (75 or 150 Hz) reduces hum from air conditioning, traffic or footsteps, while the shock mount isolates handling noise from the camera. Levels that suit your camera Many cameras get noisy when you crank their input. With +10 dB on the mic, you can keep the camera's gain lower – or drop to -10 dB for loud sources. Camera or smartphone With a TRS cable for cameras and a TRRS cable for phones, plus a cold shoe and 1/4" thread, the IVM-S2 fits on your camera, a phone rig or a gimbal. What it looks like in practice Vlog and product video Mount the IVM-S2 in the hot shoe for a vlog with low-cut at 75 Hz and gain at +10 dB. Later, screw it onto a mini tripod at your desk and record the voice-over for a product video. Good to know before you order Needs an AA battery The mic runs on a 1.5 V AA battery – not plug-in power or USB. Always keep a spare handy. A shotgun, not a wireless system The IVM-S2 sits on the camera, so the further away your subject is, the more room sound it captures. For distance interviews, a wireless mic is the better choice. Foam windscreen only A foam windscreen is included. For windy outdoor shoots, add a furry windscreen. Technical details at a glance Polar pattern: cardioid Frequency range: 20 Hz – 18 kHz Low-cut: 75 Hz / 150 Hz switchable Gain: -10 dB / 0 dB / +10 dB Sensitivity: -38 dB ±3 dB SNR: > 75 dB Max. SPL: 110 dB Power: 1 x 1.5 V AA battery Battery life: up to approx. 21 days continuous Output: 3.5 mm jack Dimensions: 77.5 x 70.5 x 48.7 mm Weight: approx. 67 g (with bracket) Operating temperature: -10 °C to +45 °C In the box 1 x Godox IVM-S2 microphone with shock mount 1 x foam windscreen 1 x 3.5 mm TRS cable 1 x 3.5 mm TRRS cable 1 x user manual

Demo unit – checked and ready to ship. Condition: New. Two cameras on two separate straps quickly turn into a tangle – and all the weight ends up on your neck. The Bronkey Tokyo #501 is a handmade leather harness for two cameras: the load is spread across both shoulders, and both bodies hang securely at your sides, always within reach. Black leather with red stitching, handmade in Spain. Dual camera leather harness, black with red stitching Two cameras, attached via 1/4" tripod-socket connectors (2 included) High-strength nickel-plated steel carabiners that swivel and lock, plus a safety strap Adjustable for heights of approx. 150 to 200 cm Two cameras, no sore neck Weight spread over both shoulders The harness shares the load of two bodies and lenses across your shoulders instead of your neck – a real relief on long wedding or event days. Securely attached Each camera clips onto a swivelling, locking nickel-plated steel carabiner via a tripod-socket connector. An extra safety strap gives what Bronkey calls triple protection. Craftsmanship you can see Bronkey handmakes its straps in Spain. The black leather with red stitching looks premium and develops a patina over time. It ships in a black-stained wooden box – a great gift, too. What it looks like in real life Wedding with wide and tele A 24–70 mm on your left, a 70–200 mm on your right. In the church you switch from wide shot to portrait without changing lenses – both cameras stay calm at your sides. Good to know before you order Attaches via the tripod socket Cameras connect through the 1/4" tripod socket, so a quick release plate cannot be mounted there at the same time. Leather needs a little care Real leather can darken in the rain and appreciates occasional care. If you need a vegan or fully weatherproof option, a nylon strap is the better choice. Pre-owned This is a pre-owned / demo item. Light signs of use on the leather are possible; see the condition stated above. Technical details at a glance Manufacturer: Bronkey (handmade in Spain) Model: Tokyo #501, SKU TOK-501 Type: dual camera harness Material: vegetable-grain leather with red stitching Colour: black with red stitching Hardware: high-strength nickel-plated steel carabiners, swivelling and locking Camera attachment: 1/4" tripod-socket connectors Safety: additional safety strap Fit: heights approx. 150–200 cm What's in the box 1 x Bronkey Tokyo #501 dual camera harness 2 x tripod-socket connectors (1/4") 1 x protective cotton bag 1 x wooden presentation box

Demo unit – checked and ready to ship. Condition: New. Strap off for the tripod, strap back on for the walk – with conventional straps it's a fiddle every time. The PGYTECH Camera Shoulder Strap clicks on and off in seconds with quick connectors, and comes with an Arca-type quick release plate the strap can attach to as well. Night Black, with a padded shoulder section. Quick connectors with dead-centre locking, one-handed push-button release Rated up to 90 kg by PGYTECH, UHMWPE lanyard 4.5 cm wide, EPDM padding, adjustable at both ends Includes PGYTECH Arca-type plate and two sets of connectors Faster between tripod and shoulder Click on, click off The small connectors stay on the camera, the strap just clicks in. Press the button to release – one-handed, even with gloves – and switch to a tripod or gimbal without losing anything. Arca-type plate included The included Arca-type plate goes into the tripod socket and doubles as a strap anchor, so your camera drops straight onto an Arca head. Built-in wear indicator The connector lanyard has a three-layer structure. When the outer layer wears through, a warning layer tells you it's time to replace it. What it looks like in real life Landscape hike with a tripod On the trail the camera rides on your shoulder. At the viewpoint you unclip the strap, drop the camera onto the tripod head with the Arca plate – and clip the strap back on in seconds afterwards. Good to know before you order Length PGYTECH lists the strap at 152 cm, adjustable at both ends. The "100–142 cm" range from our list is not confirmed by the manufacturer. Proprietary connectors The connectors are PGYTECH's own system and not officially compatible with Peak Design anchors. Pre-owned This is a pre-owned / demo item. Light signs of use are possible; see the condition stated above. Technical details at a glance Manufacturer: PGYTECH Model: Camera Shoulder Strap, Night Black (P-CB-119) Dimensions: 1520 x 45 mm Weight: 139 g Materials: polyester, EPDM, fibre-reinforced nylon; UHMWPE lanyard Load capacity: up to 90 kg (manufacturer rating) Compatibility: universal, via strap lugs or tripod socket (plate) What's in the box 1 x PGYTECH Camera Shoulder Strap with quick connectors 2 x sets of attachment connectors 1 x PGYTECH Arca-type quick release plate 1 x Allen key 1 x metal adapter for side lugs

Demo unit – checked and ready to ship. Condition: New For a walk with a small camera, a backpack is overkill and a jacket pocket isn't enough. The WANDRD ROGUE Sling 3L is a compact sling for a compact camera or a small mirrorless body with a pancake lens, plus the essentials. Wear it as a sling, a messenger or around your waist – in Aegean Blue. 3 litres, approx. 15 x 23 x 10 cm outside, only around 450 g Three ways to carry: sling, messenger, waist Weather-resistant ballistic nylon and zips Removable, adjustable divider in the main compartment Small, quick and tough Camera in hand in seconds Swing the bag to the front, open the main compartment and your camera is in your hand – no stopping, no taking off a backpack. Organised in a small space An accordion-style back pocket, a catch-all pocket with pen loop, a key clip and an adjustable divider give batteries, cards, phone and keys their place. Built for outdoors The shell is 840D Jr. ballistic nylon with coating plus 1680D ballistic nylon. An air mesh back panel and three grab handles make it comfortable to carry. What it looks like in real life City break with a compact Your Fujifilm X100 or small mirrorless with a pancake sits in the main compartment, spare battery and cards in the back pocket. Wear it on your back while walking and swing it round for the shot. Good to know before you order Small kit only 3 litres is compact: WANDRD says it fits a small point-and-shoot with accessories, an APS-C body with pancake lens or a mini drone. A full-frame body with a zoom won't fit. Weather-resistant, not waterproof Materials and zips are weather-resistant, but the bag isn't waterproof or meant for heavy, sustained rain. Version 1 This is the first version (V1) of the ROGUE Sling; WANDRD has since released an updated version. Pre-owned This is a pre-owned / demo item. Light signs of use are possible; see the condition stated above. Technical details at a glance Manufacturer: WANDRD Model: ROGUE Sling 3L (V1), Aegean Blue, part no. SLG3-AB-1 Volume: 3 L External: approx. 15 x 23 x 10 cm (H x W x D) Internal: approx. 14 x 20 x 9 cm Weight: approx. 0.45 kg Strap length: 42–110 cm Materials: 840D Jr. ballistic nylon (coated), 1680D ballistic nylon Carry modes: sling, messenger, waist What's in the box 1 x WANDRD ROGUE Sling 3L, Aegean Blue, with divider

Demo unit – checked and ready to ship. Condition: New. Neck strap one minute, cross-body sling the next, off entirely for the tripod after that – a regular strap can't keep up. The Peak Design Slide is Peak Design's wide pro strap: length adjusts in seconds, Anchor Links click on and off instantly, and it's built for larger cameras. This one comes in Midnight, a deep navy blue. Wide 4.6 cm strap for DSLRs and full-frame mirrorless bodies Length adjustable from 99 to 145 cm Anchor Link quick-connect system, 4 anchors and Anchor Mount included One smooth side, one grippy side – stays on your shoulder One strap for every situation Adjust in seconds The quick adjusters let you cinch the strap tight while walking and lengthen it to shoot, switching between sling, shoulder and neck carry on the fly. Click off for the tripod The anchors stay on the camera and the strap simply clicks in. For a tripod or gimbal, it comes off in one move – Peak Design rates the system at around 90 kg (200 lb). Grippy on the shoulder One side has a grippy texture so the strap doesn't slide off your shoulder; the other is smooth so it glides nicely in sling mode. What it looks like in real life A day of street reportage While walking, the camera sits snug across your back. To shoot, pull the strap long for full freedom of movement. Back at the hotel, unclip it and pack the camera without a tangle. Good to know before you order Slide, not Slide Lite This is the wide Slide (4.6 cm). For small, light cameras the slimmer Slide Lite is often more comfortable; the Slide shines with larger bodies. Check the anchors Anchor cords are wear parts. Peak Design recommends inspecting them regularly and replacing them when worn. Pre-owned This is a pre-owned / demo item. Light signs of use are possible; see the condition stated above. Technical details at a glance Manufacturer: Peak Design Model: Slide (V3), colour Midnight, part no. SL-MN-3 Width: 4.6 cm Length: 99–145 cm, adjustable Weight: 148 g Material: nylon webbing, leather details Load capacity: approx. 90 kg / 200 lb (manufacturer rating) Connection: Anchor Links What's in the box 1 x Peak Design Slide, Midnight 4 x Anchors 1 x Anchor Mount

Demo unit – checked and ready to ship. Condition: New. With a long lens on a monopod, you only want to tilt and pan. A ball head that gives way in every direction just gets in the way. The Sunwayfoto DT-03S is a compact two-way tilt head with exactly those two axes. It weighs 363 g, holds up to 15 kg and comes with an Arca-Swiss lens plate. Two-way head: 180° tilt, 360° pan Holds up to 15 kg and weighs only 363 g Dual locking knobs on the left and right Includes DPG-80DRL telephoto lens plate (Arca-Swiss) Steady control for long lenses Only the movement you need The DT-03S tilts forward and back through 180° and pans 360° on its base. It never flops sideways, which keeps it calm on a monopod while you track birds or athletes. Locked when it counts There's a locking knob on each side. Tighten one or both, with both giving maximum holding power. The elongated knobs and the pan knob are ratcheted so they don't get in each other's way. Built for outdoor use The body is T6061 aluminium with stainless steel at the stress points and a hard-anodised finish, so it holds up to long days outside. What it looks like in practice Bird photography by the lake Your 150–600 mm sits on the DPG-80DRL plate in the DT-03S on a monopod. Loosen one knob, tilt up to the heron and pan with it as it takes off. While you wait, lock both knobs and the rig stays put. What you should know before you order Not a ball head The DT-03S is a two-axis tilt head. For portrait orientation with the camera mounted directly or for angled setups, a ball head is more practical. With a telephoto lens, you simply rotate the tripod collar for portrait shots. Designed for lenses with a tripod collar The included DPG-80DRL is a lens plate for tripod collars. To mount a camera body directly, you'll need a matching Arca-Swiss camera plate or L-bracket. 3/8" mounting thread The base has a 3/8" female thread. Tripods with a 1/4" screw need an adapter. Technical details Type: two-way tilt head for tripods and monopods Tilt range: 180° (fore and aft), with scale Panning: 360°, lockable, with scale Max. load: 15 kg Weight: 363 g Clamp: SAC-60 screw-knob, Arca-Swiss compatible, replaceable Tripod mount: 3/8" female thread Material: T6061 aluminium, stainless steel, hard-anodised In the box 1 x Sunwayfoto DT-03S tilt head with SAC-60 clamp 1 x DPG-80DRL quick release plate for telephoto lenses

We are clearing out our warehouse and selling transparent open fronted storage bins made of polyethylene that we no longer need. Thanks to the clear material, the contents are visible from every side, even on a shelf or in a stack. Ideal for small parts, screws, spare parts or consumables in the workshop, warehouse, garage or basement. The bins are sturdily built: reinforcing ribs on the sides and back keep them in shape even under load. They stack securely or can be hung on louvre panels and mobile racks using the hanging rail on the back. The open front gives you access even when the bins are stacked. Details: Colour: transparent Material: polyethylene (PE) External dimensions (L x W x H): 342 x 204 x 164 mm Internal dimensions (L x W x H): 250 x 163 x 162 mm Capacity: 12 litres Load capacity: 20 kg, stacking load: 60 kg, hanging load: 10 kg Temperature resistant from –40 °C to +80 °C Resistant to many oils, greases, acids and alkalis Carrying handles at front and back Label holder on the front Condition: used, clean and fully functional, minor signs of wear

We’re clearing out our warehouse and selling polyethylene open-fronted storage bins that we no longer need. The bins are ideal for small parts, screws, spare parts, or supplies in a workshop, warehouse, garage, or basement. The bins are very sturdy: Reinforcing ribs on the sides and back keep them dimensionally stable even under load. They can be safely stacked or hung on wall panels and mobile shelving units using the hanging bar on the back. Thanks to the open front, you can see the contents at a glance and access them even when stacked. Details: Color: green Material: polyethylene (PE) External dimensions (L x W x H): 342 x 204 x 164 mm Internal dimensions (L x W x H): 250 x 163 x 162 mm Capacity: 12 liters Load capacity: 20 kg, stacking load: 60 kg, suspended load: 10 kg Temperature-resistant from –40 °C to +80 °C Resistant to many oils, greases, acids, and alkalis Carrying handles on the front and back Label holder on the front (labels not included) Condition: used, clean, and fully functional