Yongnuo YN 622C or YN 622N

Wireless Remote Control & Flash Trigger Yongnuo RF-603 II Yongnuo RF-603 Transceiver-System for Nikon MC-DC216-Channel wireless remote for cameras and flashes - 100m rangeThe RF-603 is a transceiver system, which means that both devices are transmitter and receiver, the function is detected in application. Both transceivers provide the function to trigger lightning unleashed. They can also be used for cable release or wireless remote release of a camera. With these capabilities, the RF-603 offers huge features at a low price. Flash triggering Off-camera flash units or studio flashes can be triggered with the RF-603. Both transceivers come with hot shoe and hot shoe mount. The flash is mounted to one transceiver, the other transceiver is mountet on the camera. You can mount a second flash on the transceiver placed on the camera. (Studio) flash units with 6.3mm or 3.5mm jack can be triggerd with an optional trigger cable.   Camera triggering With the RF-603 Wireless Remote and the included release cable, a camera can be triggered from a large distance. Under optimal conditions the range of the trigger is up to 100m. The release button of the sender focuses the camera when you press the button halfway down and triggers the camera when it's pushed all the way down. Time exposure and continuous shooting is possible if the camera modes are set accordingly. You can also use a single transceiver as a cable release. On cameras where the video function is starded by the photo-shutter button, the video recordings can also start and stop with this trigger. Triggering camera and flashIf you set up the transceivers for camera triggering, mount the receiving transceiver on the cameras hot shoe and ad a flash on its top, you will be able to shot and flash remote. With an optional additional transceiver camera and of-camera flashes could be triggered remote. Technical Details: Type: FSK 2.4GHz wireless triggerRange: approx. 100mChannel: 16Power supply: 2x 2x AAAStandby time: min. 45hMax. trigger voltage: 30VWeight (of one transceiver): approx. 36gDimensions: approx. 3,7 x 3,0 x 8,2cm   Scope of delivery: 2 RF-603N TransceiverCable N3 (MC-DC2) for camera triggering Nikon Df, D7500, D7200, D7100, D7000, D5600, D5500, D5300, D5200, D5100, D5000, D3300, D3200, D3100, D750, D610, D600, D90 Nikon Z7, Z6, Z5, Z7II, Z6IINikon Coolpix P7800, P7700Nikon Coolpix A Note:This wireless flash trigger does not support TTL.RF-603 will not work with RF-602.

Flash and wireless remote shutter Yongnuo RF-603 II like Canon RS-80N3 Flash and radio remote shutter release Yongnuo RF-603 II 16-channel radio trigger for cameras and flashes - 100m range The RF-603 is a transceiver system, which means that both devices are transmitter and receiver at the same time and the function is recognized depending on the application. Both transceivers offer the function to trigger flashes unleashed. They can also be used as cable and radio remote triggers for cameras. With these possibilities the RF-603 offers an enormous range of functions at a low price.Flash Trigger The RF-603 enables wireless, unleashed triggering of clip-on and studio flashes even from a great distance. For attachable flashes, the transceivers have a flash shoe to insert the flash. The second transceiver is pushed into the hot shoe. On the transceiver plugged on the camera another flash can be plugged on and triggered. (Studio) flash units with 6.3mm or 3.5mm jack socket can be connected to the transceiver with an optionally available trigger cable.Camera shutter release With the RF-603 wireless shutter release and the supplied release cable, cameras can be released even from a great distance. To do this, connect one of the transceivers to the camera with the cable while releasing the camera with the release button of the second one. Alternatively, the transceiver connected by cable can be used directly as a remote cable release. Under optimal conditions the shutter release has a range of up to 100m. The release button has two pressure points. At the first pressure point the camera focuses, at the second one it releases. Long time exposures and serial pictures are possible. However, the corresponding settings on the camera must be made for this. On cameras where the video function is controlled by the photo release button, video recordings can also be started and stopped with this release.Synchronous remote triggering of camera and flash To trigger the camera and the flash synchronously, you plug the transceiver, which is connected to the camera via cable, onto the camera's hot shoe and equip it with a flash on top. This set can be triggered via the second transceiver. With an optionally available transceiver, both the camera and the unleashed flash can be triggered synchronously.Technical details: Type: FSK 2.4GHz radio triggerRange: approx. 100mSynchronization time: 1/200sek.Channels: 16Power supply: 2x AAA eachStandby time: min. 45hMax. ignition voltage: 30VWeight (single transceiver): approx. 36gDimensions: approx. 3.7 x 3.0 x 8.2cm Compatible with the following cameras: (list is not exhaustive)   • Canon EOS-1D X Mark II • Canon EOS 5DS • Canon EOS 5DS R • Canon EOS 5D Mark IV • Canon EOS 6D Mark II • Canon EOS 7D II • Canon EOS 200D** • Canon EOS 2000D** • Canon EOS 1300D** • Canon EOS M5** • Canon EOS M6** • Canon EOS-1D X • Canon EOS-1D C • Canon EOS-1Ds Mark III • Canon EOS-1Ds Mark II • Canon EOS-1Ds • Canon EOS-1D Mark IV • Canon EOS-1D Mark III • Canon EOS-1D Mark II • Canon EOS-1D • Canon EOS 5D Mark III • Canon EOS 5D Mark II • Canon EOS 5D • Canon EOS 20D • Canon EOS 60Da* • Canon EOS 7D • Canon EOS 50D • Canon EOS 40D • Canon EOS 30D • Canon EOS 10D • Canon EOS D60 • Canon D30 • Canon EOS-1D X Mark III • Canon EOS R5 • Canon EOS R3 • Canon EOS R7** • Canon EOS R10 • Canon EOS R6 Mark II • Canon EOS R1 • Canon EOS R5 Mark II       **Compatible via optional RA-E3 cable Scope of delivery: 2 RF-603N II transceivers1 release cable C3 (RS-80N3) for camera Note: The RF-603 wireless trigger does not transmit TTL data. All camera and flash settings must be made manually. With a suitable flash adapter, the RF-603 can also be used with most cameras of other brands. The RF-603 is not compatible with the RF-602.

Yongnuo YN-622N II i-TTL radio flash output for Nikon and Yongnuo The new flash trigger offers automatic TTL exposure metering without the need for a line of sight between camera and flash. The range of the YN-622 can be up to 100m. The YN-622 is larger than the Yongnuo RF-603 and has almost the same dimensions as the Pixel Kings. However, this allows the use of inexpensive AA batteries and provides space for convenient buttons. The YN-622 supports TTL, manual flash mode, 3 channels and 3 groups, high-speed synchronisation (HSS) up to 1/8000s, automatic zoom, exposure compensation, AF auxiliary light, PC Sync and many other features. The wireless receiver offers a function called HyperSync. This enables faster sync times even with studio flashes or other manual flashes. The new YN-622 fits perfectly into the Yongnuo product line and is available for Canon and Nikon DSLRs. Compatible are all flashes from Yongnuo, Canon's EX II and Nikon i-TTL flashes. Features Compatible flash mode: i-TTL II / Manual / MultiCompatible shutter sync: 1st curtain, 2nd curtain, high-speed sync. Curtain, high-speed synchronisation (HSS / FP) Max 1/8000sControl via the with camera flash menuPC port can output 1st/2nd/HSS signal studio flash; Flash Exposure Compensation (FEC)Flash Exposure Bracketing (FEB)Flash Exposure Lock (FEL)Flash Zoom (Auto, Manual)Tool LightE-TTL Group Ratio (ALL / A: B / A: B C)Manual / Multi Group (ALL / A: B / A: B: C)Live-View controlFocus Assist lightHigh-speed continuous shooting controlSpeedlite flashes on the hot shoe of the transmitter support i-TTLCompatible with all YONGNUO / Nikon i-TTL flash unitsSettings automatically memorised Settings automatically savedSingle-contact cameraDue to Nikon's i-TTL system, it is not possible to control the YN-622N via the camera name. This is done either directly on the transceiver via certain button combinations or via a commander/master-compatible flash unit (SB-700, SB-900, SB-910, SU-800) that can be placed in the hot shoe of the transmitter. This allows you to use the radio system of the YN-622 trigger instead of the infrared signal of the master unit, thus increasing the range of the entire system. Compatible cameras D600, D610, D700, D800, D800E D70, D70s, D80, D90D200, D300, D300sD7000D5000, D5100D3000, D3100, D3200D3, D3s, D4 Compatible flash units Yongnuo YN-465, YN-467, YN-468 II, YN-565, YN-568Nikon SB-400, SB-600, SB-700, SB-800, SB-900, SB-910Nikon SU-800, SB-700, SB-900 and SB-910 can be used as a master unit Scope of delivery 1 x YN-622N II Transceriver The German manual for the Yongnuo YN-622N E-TTL can be found here

Yongnuo YN-622C-Wireless e-TTL Flash Controller Kit for Canon Yongnuo's new radio TTL flash trigger YN-622 is available now! The new flash trigger offers automatic exposure metering TTL without the need of a line of sight between camera and flashes. Infrared bases systems like ST-E2 often suffer from being hidden inside soft boxes or behind bounders which are no problem for radio based systems. Typically radio triggers offer a maximum range of up to 100m under best circumstances. The YN-622 is much bigger than the manual trigger RF-603 and nearly the same dimensions as the Pixel King. This allows the use of widely used AA batteries and comfortable buttons. It supports TTL, manual flash mode, 3 channels and 3 groups, high speed sync (HSS) up to 1/8000s, automatic zoom, exposure compensation, AF assist beam, PC sync and a lot more features. Apparently the radio trigger offers a function called hypersync. This allows shorter sync speeds even with studio flashes or other manual flashes. The new YN-622 fits perfectly in the Yongnuo product line and will be first available for Canon DSLR, probably later for Nikon. Compatible are all flashes by Yongnuo and Canon's EX II flashes. Features Compatible flash mode: E-TTL II/Manual/Multi Compatible Shutter sync: 1st curtain, 2nd curtain, High speed sync (HSS/FP) Max 1/8000s Control remote speedlites using camera's build-in flash menu PC port can output 1st/2nd/HSS signal to trigger studio flash Flash Exposure Compensation (FEC) Flash Exposure Bracketing (FEB) Flash Exposure Lock (FEL) Flash zooming (auto，manual) Modeling Flash E-TTL group ratio (ALL/A:B/A:B C) Manual/Multi Group (ALL/A:B/A:B:C) Live view triggering Focus Assist Lamp High-speed continuous shooting trigger Speedlites on hot-shoe of transmitter supports ETTL Compatible with ALL YongNuo/Canon EXII series speedlites Settings saved automatically Single-contact camera & speedlite triggering Compatibility This Canon EOS cameras offer in camera flash control with Yongnuo YN622 C: 1D Mark III, 1D Mark IV, 1Ds Mark III 5D Mark II, 5D Mark III 7D 40D, 50D, 60D 450D, 500D, 550D, 600D, 650D 1000D, 1100D The following flashes will support this wireless remote control through camera menu": Canon 600EX, 600EX-RT, 580EX II, 430EX II, 320EX, 270EX II YongNuo YN-565EX, YN468, YN468 II, YN467, YN467 II, YN465 If you use the Canon Speedlite 430EX or 580EX (not mark II) or an older camera without the Flash Control menu then you will have to make settings by hand. Older cameras that dont have the same Flash Control menu include the original 5D, 10D, 20D, 30D, 300D, 350D, 1D and 1D Mark II. Package Content 1 x YN-622C- TX Master 1 x YN-622 Transceriver 1 x User manual English and Chinese

Flash and wireless remote shutter Yongnuo RF-603 II like Nikon MC-30 or MC-36   16-channel radio trigger for cameras and flashes - 100m range The RF-603 is a transceiver system, which means that both devices are transmitter and receiver at the same time and the function is recognized depending on the application. Both transceivers offer the function to trigger flashes unleashed. They can also be used as cable and radio remote triggers for cameras. With these possibilities the RF-603 offers an enormous range of functions at a low price.Flash Trigger The RF-603 enables wireless, unleashed triggering of clip-on and studio flashes even from a great distance. For attachable flashes, the transceivers have a flash shoe to insert the flash. The second transceiver is pushed into the hot shoe. On the transceiver plugged on the camera another flash can be plugged on and triggered. (Studio) flash units with 6.3mm or 3.5mm jack socket can be connected to the transceiver with an optionally available trigger cable.Camera shutter release With the RF-603 wireless shutter release and the supplied release cable, cameras can be released even from a great distance. To do this, connect one of the transceivers to the camera with the cable while releasing the camera with the release button of the second one. Alternatively, the transceiver connected by cable can be used directly as a remote cable release. Under optimal conditions the shutter release has a range of up to 100m. The release button has two pressure points. At the first pressure point the camera focuses, at the second one it releases. Long time exposures and serial pictures are possible. However, the corresponding settings on the camera must be made for this. On cameras where the video function is controlled by the photo release button, video recordings can also be started and stopped with this release.Synchronous remote triggering of camera and flash To trigger the camera and the flash synchronously, you plug the transceiver, which is connected to the camera via cable, onto the camera's hot shoe and equip it with a flash on top. This set can be triggered via the second transceiver. With an optionally available transceiver, both the camera and the unleashed flash can be triggered synchronously. Technical details: Type: FSK 2.4GHz radio triggerRange: approx. 100mSynchronization time: 1/200sek.Channels: 16Power supply: 2x AAA eachStandby time: min. 45hMax. ignition voltage: 30VWeight (single transceiver): approx. 36gDimensions: approx. 3.7 x 3.0 x 8.2cm Scope of delivery: 2 RF-603N II transceiversRelease cable N3 (MC-30 / MC-36) for camera Compatible with the following cameras: (list is not exhaustive) • Nikon Z9 • Nikon Z8 • Nikon Z6 • Nikon D850 • Nikon D810 • Nikon D810A • Nikon D6 • Nikon D5 • Nikon D4 • Nikon D4S • Nikon D3 • Nikon D3S • Nikon D3X • Nikon D800 • Nikon D800E • Nikon D700 • Nikon D500 • Nikon D300 • Nikon D200           Note: The RF-603 wireless trigger does not transmit TTL data. All camera and flash settings must be made manually.With a suitable flash adapter, the RF-603 can also be used with most cameras of other brands.The RF-603 is not compatible with the RF-602.  

Take control of your flash lighting directly from your camera: The Yongnuo YN-622N-TX is an i-TTL wireless flash controller for compatible Nikon cameras. It lets you trigger compatible flash units wirelessly and adjust their settings using the built-in LCD display. Control flash output, exposure compensation and zoom for up to three flash groups without having to adjust each flash individually. Whether in the studio or on location, the YN-622N-TX gives you flexible options for creative lighting. i-TTL wireless flash controller for compatible Nikon cameras Control up to 3 flash groups (A/B/C) TTL, manual and Super Sync modes Flash output and flash exposure compensation adjustable in 1/3-stop increments Individual zoom control for each group 7 wireless channels and up to 100 m range Convenient flash control via LCD Adjust settings directly on the transmitter The built-in LCD displays the main flash parameters clearly. You can adjust TTL functions such as flash exposure compensation (FEC) as well as manual flash output directly on the controller. This avoids navigating through the camera menu and lets you adapt your lighting quickly to changing shooting conditions. Combine three flash groups flexibly Control up to three groups with different settings. Combine TTL, manual and Super Sync groups to balance key, fill and effect lighting. The zoom position of each flash head can be adjusted individually for every group. Versatile synchronisation options TTL, high-speed sync and second-curtain sync The YN-622N-TX supports TTL flash control, manual flash control, high-speed sync (HSS / Auto FP) and second-curtain sync. This allows you to work creatively with flash even at fast shutter speeds or when capturing motion. Super Sync for compatible flash units The Super Sync function can, under suitable conditions, allow studio flashes and speedlights without HSS support to be used at shutter speeds above the normal flash sync speed. Results depend on the flash unit, camera and settings used. For studio and outdoor photography Wireless control with up to 100 m range With seven wireless channels and a range of up to 100 m, you can position your flash units flexibly. The system is suitable for portrait, fashion, product and event photography where you want to shape light independently of the camera position. Firmware updates and additional connections Firmware updates can be installed via the USB port. A PC-sync port also allows integration into compatible wired flash setups. The built-in AF assist beam helps with focusing in low-light conditions. What to know before ordering Check compatibility The YN-622N-TX is designed for compatible Nikon cameras with i-TTL support and works with Yongnuo YN-622N i-TTL wireless transceivers. Please check the compatibility of your camera and flash units before purchasing. Batteries not included The controller requires two AA batteries, which are not included. Technical details at a glance Product type: i-TTL wireless flash controller / transmitter Brand: Yongnuo Model: YN-622N-TX Camera connection: Nikon hot shoe Compatible system: Yongnuo YN-622N i-TTL Flash groups: 3 (A/B/C) Wireless channels: 7 Wireless range: up to 100 m Flash modes: i-TTL, manual, Super Sync Sync modes: HSS / Auto FP, second-curtain sync Flash output / FEC adjustment: 1/3-stop increments Zoom control: individual per group Connections: USB, PC sync Power supply: 2 x AA batteries Display: LCD Product number: 4A-YN622-N-TX Scope of delivery 1 x Yongnuo YN-622N-TX controller 1 x User manual (English / Chinese) 1 x LS-2.5/N1 camera cable 1 x LS-2.5/N3 camera cable The German manual for the Yongnuo YN-622N TX E-TTL can be found here  

Yongnuo YN-622C II e-TTL wireless flash trigger for Canon and Yongnuo   Quick lock design Supports USB firmware upgrade Supports "622" communication mode,"560-RX" communication mode Compatible flash mode: E-TTL (II)/ Manual/Multi Compatible Shutter sync: 1st curtain, 2nd curtain, high speed sync (HSS/FP), Max 1/8000s sync speed Control remote flash using camera's flash control menu screen (Remote Control Mode) Support E-TTL/Manual/Multi flash mode mix using (Mix Control Mode) Flash on hot-shoe of transmitter supports ETTL Support Flash Exposure Compensation (FEC) Support Flash Exposure Bracketing (FEB) Support Flash Exposure Lock (FEL) Support modeling Flash Support E-TTL group ratio (ALL/ A:B/ A:B C) Support Manual/Multi group (ALL/ A:B/ A:B:C) Support flash zooming (auto, manual) Support AF assist beam emitter(AF Lamp) Support PC port triggering strobe flashes and support 1st, 2nd curtain/HSS (Super Sync) Support LCD Live view triggering Support high-speed continuous shooting trigger Settings saved automatically Compatible with ALL YongNuo/Canon EXII series flashes Support single-contact of camera & flash triggering (max sync speed is 1/250s)

Yongnuo YN-622N i-TTL radio flash trigger kit for Nikon The new flash trigger offers automatic TTL exposure metering without the need for a line of sight between camera and flash. The range of the YN-622 can be up to 100m. The YN-622 is larger than the Yongnuo RF-603 and has almost the same dimensions as the Pixel Kings. However, this allows the use of cheap AA batteries and provides space for convenient buttons. The YN-622 supports TTL, manual flash mode, 3 channels and 3 groups, high-speed synchronisation (HSS) up to 1/8000s, automatic zoom, exposure compensation, AF auxiliary light, PC Sync and many other features. The wireless receiver offers a function called HyperSync. This enables faster sync times even with studio flashes or other manual flashes. The new YN-622 fits perfectly into the Yongnuo product line and is available for Canon and Nikon DSLRs. Compatible are all flashes from Yongnuo, Canon's EX II and Nikon i-TTL flashes. Features Compatible flash mode: i-TTL II / Manual / MultiCompatible shutter sync: 1st curtain, 2nd curtain, high-speed sync. Curtain, high-speed synchronisation (HSS / FP) Max 1/8000sControl via the with camera flash menuPC port can output 1st/2nd/HSS signal studio flash; Flash Exposure Compensation (FEC)Flash Exposure Bracketing (FEB)Flash Exposure Lock (FEL)Flash Zoom (Auto, Manual)Tool LightE-TTL Group Ratio (ALL / A: B / A: B C)Manual / Multi Group (ALL / A: B / A: B: C)Live-View controlFocus Assist lightHigh-speed continuous shooting controlSpeedlite flashes on the hot shoe of the transmitter support i-TTLCompatible with all YONGNUO / Nikon i-TTL flash unitsSettings automatically memorised Settings automatically savedSingle-contact cameraDue to Nikon's i-TTL system, it is not possible to control the YN-622N via the camera name. This is done either directly on the transceiver via certain button combinations or via a commander/master-compatible flash unit (SB-700, SB-900, SB-910, SU-800) that can be placed in the hot shoe of the transmitter. This allows you to use the radio system of the YN-622 trigger instead of the infrared signal of the master unit, thus increasing the range of the entire system. Compatible cameras: D600, D610, D700, D800, D800E D70, D70s, D80, D90D200, D300, D300sD7000D5000, D5100D3000, D3100, D3200D3, D3s, D4 Compatible flash units: Yongnuo YN-465, YN-467, YN-468 II, YN-565, YN-568Nikon SB-400, SB-600, SB-700, SB-800, SB-900, SB-910Nikon SU-800, SB-700, SB-900 and SB-910 can be used as a master unit Scope of delivery: 1 x YN-622N TX Master 1 x YN-622N Transceriver1 x instruction manual in English, Chinese and German for download The German manual for the Yongnuo YN-622N E-TTL can be found here The German manual for the Yongnuo YN-622N TX E-TTL can be found here  

Yongnuo YN560TX Pro Flash Transmitter Nikon YN560-TX PRO flash transmitter is a upgrade version based on YN560TX II,with TTL/ high speed sync functions,its radio protocol achieves cross-brand compatibility. YN560-TX PRO can control,trigger YN200/YN862 series and the models which have been upgraded to the latest firmware such as YN622C(N) II/YN685/YN968C/YN968N(II) (in 560RX mode) to realize ETTL/M/Multi flash, high speed sync, focal length control functions.Compatible with radio flash and flash trigger models such as YN560III/IV/YN660/YN720/YN860Li RF603 series /RF605 series directly,achieving M/Multi flash functions.16 channels,up to 10,000 settable photographer ID,5 flash groups,A/B/C/D/EFully supports ETTL/M/Multi/GR flash mode.Supports front-curtain sync,second curtain sync(M mode),high speed syncSupports ETTL ratio, flash exposure compensation, flash exposure Lock, flash exposure bracketing, modeling flash functions.Maximum 2.4G radio communication distance is over 100m.Supports remote control focal settings of slave unit flash (only for YONGNUO compatible flashes)Firmware can be upgraded via Micro-USBHigh definition dot-matrix LCD, back-light button.Water and dust resistant quick lock structureBuilt-in AF assist lamp

Off-camera flash is fun – until every power change means digging through the camera menu. The Yongnuo YN-622C-TX is a radio transmitter for Canon with its own LCD screen: you control up to three flash groups right on the trigger, switch between TTL and manual power and use high-speed sync. It pairs with Yongnuo YN-622C receivers. E-TTL II, manual power and Super Sync, mixable per group 3 groups, 7 channels, 2.4 GHz radio with up to 100 m range HSS up to 1/8000 s and second-curtain sync LCD screen, runs on 2 AA batteries Your flashes under control, no menu diving Everything on the screen Power, flash exposure compensation in 1/3 stops and zoom are set per group directly on the YN-622C-TX. That saves time on set and keeps you connected with your subject instead of buried in the camera menu. Mix TTL and manual Group A in TTL, group B on manual 1/8 and group C driving a studio strobe via Super Sync: modes can be combined per group. Flash Value Lock (FVL) holds a metered TTL output. Fast shutter speeds in daylight HSS lets you shoot wide open even in bright sun. Super Sync lets studio strobes and speedlites without HSS work at shutter speeds above your camera's sync speed, with the timing adjustable manually per group. What it looks like in practice Outdoor portrait in the afternoon Two Canon speedlites on YN-622C receivers stand either side of your subject. You darken the sky at 1/2000 s with HSS, run the key light in TTL and dial in the rim light manually – all from the transmitter on your camera. What you should know before you order Transmitter only, receivers sold separately The YN-622C-TX is the on-camera transmitter only. Every off-camera flash needs a Yongnuo YN-622C receiver or a flash with the YN-622 radio system built in. It is not compatible with other radio systems such as Canon RT or Godox X. Check compatibility with newer bodies The YN-622C-TX is a proven trigger for Canon EOS DSLRs (list below). The manufacturer has not published a compatibility list for mirrorless Canon EOS R models – ask us before you buy if you shoot EOS R. User manual The included manual is in English and Chinese. We can provide a German manual on request. Technical details at a glance Manufacturer: Yongnuo Model: YN-622C-TX System: Canon E-TTL / E-TTL II Radio: 2.4 GHz, 7 channels Range: up to 100 m Groups: 3 (A, B, C), TTL / M / Super Sync mixable Power and FEC: adjustable in 1/3 stops Sync: HSS up to 1/8000 s, first and second curtain, Super Sync Other features: Flash Value Lock, per-group zoom control, AF assist light, battery indicator, auto-saved settings Ports: PC sync socket (also usable as input), USB for firmware updates Power: 2 x AA Compatible receiver: Yongnuo YN-622C Compatible Canon cameras (per manufacturer): EOS-1D Mark III, 1D Mark IV, 1Ds Mark III, 1D X, 5D Mark II, 5D Mark III, 6D, 7D, 40D, 50D, 60D, 70D, 100D, 450D, 500D, 550D, 600D, 650D, 700D, 1000D, 1100D In the box 1 x Yongnuo YN-622C-TX transmitter 1 x user manual (English/Chinese)

Yongnuo YN-622 C II E-TTL II wireless flash trigger for Canon and Yongnuo complementary Yongnuo's new radio TTL flash trigger YN-622 is available now! The new flash trigger offers automatic exposure metering TTL without the need of a line of sight between camera and flashes. Infrared bases systems like ST-E2 often suffer from being hidden inside soft boxes or behind bounders which are no problem for radio based systems. Typically radio triggers offer a maximum range of up to 100m under best circumstances.The YN-622 is much bigger than the manual trigger RF-603 and nearly the same dimensions as the Pixel King. This allows the use of widely used AA batteries and comfortable buttons.It supports TTL, manual flash mode, 3 channels and 3 groups, high speed sync (HSS) up to 1/8000s, automatic zoom, exposure compensation, AF assist beam, PC sync and a lot more features.Apparently the radio trigger offers a function called hypersync. This allows shorter sync speeds even with studio flashes or other manual flashes. The new YN-622 fits perfectly in the Yongnuo product line and will be first available for Canon DSLR, probably later for Nikon. Compatible are all flashes by Yongnuo and Canon's EX II flashes.FeaturesCompatible flash mode: E-TTL II/Manual/MultiCompatible Shutter sync: 1st curtain, 2nd curtain, High speed sync (HSS/FP) Max 1/8000sControl remote speedlites using camera's build-in flash menuPC port can output 1st/2nd/HSS signal to trigger studio flashFlash Exposure Compensation (FEC)Flash Exposure Bracketing (FEB)Flash Exposure Lock (FEL)Flash zooming (auto，manual)Modeling FlashE-TTL group ratio (ALL/A:B/A:B C)Manual/Multi Group (ALL/A:B/A:B:C)Live view triggeringFocus Assist LampHigh-speed continuous shooting triggerSpeedlites on hot-shoe of transmitter supports ETTLCompatible with ALL YongNuo/Canon EXII series speedlitesSettings saved automaticallySingle-contact camera & speedlite triggeringCompatibilityThis Canon EOS cameras offer in camera flash control with Yongnuo YN622 C:1D Mark III, 1D Mark IV, 1Ds Mark III5D Mark II, 5D Mark III7D40D, 50D, 60D450D, 500D, 550D, 600D, 650D1000D, 1100DThe following flashes will support this wireless remote control through camera menu":Canon 600EX, 600EX-RT, 580EX II, 430EX II, 320EX, 270EX IIYongNuo YN-565EX, YN468, YN468 II, YN467, YN467 II, YN465If you use the Canon Speedlite 430EX or 580EX (not mark II) or an older camera without the Flash Control menu then you will have to make settings by hand. Older cameras that dont have the same Flash Control menu include the original 5D, 10D, 20D, 30D, 300D, 350D, 1D and 1D Mark II.Package Content1 x YN-622C II Transceriver

Wireless flash control without cables or line of sight: The Yongnuo YN-622N II i-TTL wireless flash trigger lets you control compatible Nikon and Yongnuo flash units remotely. Its transceiver system transmits TTL information and supports wireless control of multiple flashes. From automatic i-TTL exposure to manual flash power and high-speed sync, the YN-622N II offers versatile lighting options for studio and on-location photography. i-TTL wireless control for compatible Nikon cameras and flash units High-speed sync (HSS/FP) up to 1/8000 s 2.4 GHz wireless communication with a range of up to 100 m 7 wireless channels and 3 flash groups (A/B/C) Supports i-TTL, manual flash and Multi/stroboscopic modes Transceiver system: each unit can operate as transmitter or receiver Wireless i-TTL flash control Automatic exposure and manual control The YN-622N II wirelessly transmits TTL communication between camera and flash. Compatible flash units can be used in i-TTL mode or with manually adjusted flash power. Supported features include flash exposure compensation (FEC), flash exposure lock (FEL) and flash exposure bracketing (FEB). Flexible control of multiple flash groups With three groups and seven wireless channels, you can organize multiple flashes and balance their output to suit your setup. Mixed mode allows compatible flash units to operate in i-TTL and manual mode at the same time. This gives you versatile lighting options for portraits, product photography and other creative work. High-speed sync up to 1/8000 s Flash photography at fast shutter speeds High-speed sync enables flash photography at shutter speeds above the camera's normal flash sync speed, up to 1/8000 s when supported by the camera and flash. This is especially useful for portraits in bright daylight when shooting with a wide aperture or controlling ambient light. Compatible with studio flashes The PC sync connection can trigger compatible studio flashes and manual flash units. A separate PC sync cable may be required. Available sync functions depend on the camera and flash being used. Practical upgrades in version II Quick-lock shoe and firmware updates The second version features a quick-lock hot shoe and supports USB firmware updates. It also offers multiple communication modes, including 622 mode and 560-RX mode, for integration with compatible Yongnuo wireless systems. Transceiver design for flexible use The transmitter and receiver units are identical. Each unit automatically detects whether it is mounted on the camera or connected to a flash. A wireless setup requires two transceivers: one on the camera and one on the flash. Additional receivers can expand the system. What to know before ordering Check compatibility The YN-622N II is designed for compatible Nikon cameras and Nikon i-TTL and Yongnuo flash units. Supported flashes include Nikon SB-400, SB-600, SB-700, SB-800, SB-900 and SB-910, as well as Yongnuo YN-465, YN-467, YN-468 II, YN-565 and YN-568. Please check compatibility with your camera and flash before ordering. Nikon camera menu Due to Nikon's i-TTL system, the YN-622N II cannot be controlled through the camera menu on every camera. Settings can be adjusted directly on the transceiver or through a compatible master flash unit. Batteries not included Each transceiver requires two AA batteries. Batteries are not included. Rechargeable AA batteries can be used. Technical details at a glance Product type: i-TTL wireless flash trigger / transceiver Brand: Yongnuo Model: YN-622N II Wireless technology: 2.4 GHz Range: up to 100 m Wireless channels: 7 Flash groups: 3 (A/B/C) Flash modes: i-TTL, manual, Multi Sync modes: first and second curtain, HSS/FP Maximum HSS sync speed: 1/8000 s (camera and flash dependent) Additional features: FEC, FEL, FEB, flash zoom, AF assist light Connections: hot shoe, PC sync Firmware update: via USB Power: 2 x AA per transceiver Scope of delivery 2 x Yongnuo YN-622N II transceivers (transmitter/receiver) 1 x instruction manual (English; German manual available for download) Batteries not included The German manual for the Yongnuo YN-622N E-TTL can be found here  

Wireless Remote Control & Flash Trigger Yongnuo RF-603 II for Canon RS-60E3   The RF-603 is a transceiver system, which means that both devices are transmitter and receiver, the function is detected in application. Both transceivers provide the function to trigger lightning unleashed. They can also be used for cable release or wireless remote releaseof a camera. With these capabilities, the RF-603 offers huge features at a low price. Flash triggering Off-camera flash units or studio flashes can be triggered with the RF-603. Both transceivers come with hot shoe and hot shoe mount. The flash is mounted to one transceiver, the other transceiver is mountet on the camera. You can mount a second flash on the transceiver placed on the camera. (Studio) flash units with 6.3mm or 3.5mm jack can be triggerd with an optional trigger cable. Camera triggering With the RF-603 Wireless Remote and the included release cable, a camera can be triggered from a large distance. Under optimal conditions the range of the trigger is up to 100m. The release button of the sender focuses the camera when you press the button halfway down and triggers the camera when it's pushed all the way down. Time exposure and continuous shooting is possible if the camera modes are set accordingly. You can also use a single transceiver as a cable release. On cameras where the video function is starded by the photo-shutter button, the video recordings can also start and stop with this trigger. Triggering camera and flash If you set up the transceivers for camera triggering, mount the receiving transceiver on the cameras hot shoe and ad a flash on its top, you will be able to shot and flash remote. With an optional additional transceiver camera and of-camera flashes could be triggered remote. Technical Details: Type: FSK 2.4GHz wireless triggerRange: approx. 100mChannel: 16Power supply: 2x 2x AAAStandby time: min. 45hMax. trigger voltage: 30VWeight (of one transceiver): approx. 36gDimensions: approx. 3,7 x 3,0 x 8,2cm Scope of delivery: 2 RF-603C II TransceiverCable C3 (RS-60E3) for camera triggering Note: This wireless flash trigger does not support TTL.RF-603 will not work with RF-602.

Yongnuo YN560TX Pro Flash Transmitter Canon   YN560-TX PRO flash transmitter is a upgrade version based on YN560TX II,with TTL/ high speed sync functions,its radio protocol achieves cross-brand compatibility. YN560-TX PRO can control,trigger YN200/YN862 series and the models which have been upgraded to the latest firmware such as YN622C(N) II/YN685/YN968C/YN968N(II) (in 560RX mode) to realize ETTL/M/Multi flash, high speed sync, focal length control functions.Compatible with radio flash and flash trigger models such as YN560III/IV/YN660/YN720/YN860Li RF603 series /RF605 series directly,achieving M/Multi flash functions.16 channels,up to 10,000 settable photographer ID,5 flash groups,A/B/C/D/EFully supports ETTL/M/Multi/GR flash mode.Supports front-curtain sync,second curtain sync(M mode),high speed syncSupports ETTL ratio, flash exposure compensation, flash exposure Lock, flash exposure bracketing, modeling flash functions.Maximum 2.4G radio communication distance is over 100m.Supports remote control focal settings of slave unit flash (only for YONGNUO compatible flashes)Firmware can be upgraded via Micro-USBHigh definition dot-matrix LCD, back-light button.Water and dust resistant quick lock structureBuilt-in AF assist lamp