Lens adapter for Haida M10 & M10-II - your perfect connection for creative filter photography

Haida M10 Adapter Ring for Olympus M.Zuiko Digital ED 7-14mm f2.8 PROThis Haida filter holder adapter ring is designed to allow the use of a Haida M10 filter holder on an Olympus M.Zuiko Digital ED 7-14mm f2.8 PRO lens. Using the filter holder is easily accomplished by first sliding the rear lens collar over the back of the lens until it achieves a secure fit. Then the adapter ring for the front filter holder can be screwed onto the front of the mounted rear lens collar. The adapter ring and lens collar are made of aluminum alloy to ensure a long service life with low weight.The advantages at a glance:Haida M10 system can be used on an ultra-wide angleeasy mountingUse of up to 3 plug-in filters (this can result in vignetting of up to 40% at the shortest focal length) Note: Due to the design of the lens, the Haida M10 holder can NOT be used with the M10 drop-in filters, but only with the plug-in filters.For the technicians:Filter holder system compatibility Haida M10material: aluminumWeight: 120grHaida number: HD4629Suitable for the following lens:Olympus M.Zuiko Digital ED 7-14mm f2.8 PRO Scope of delivery:1 x Haida M10 Adapter to Olympus M.Zuiko Digital ED 7-14mm f2.8 PRO

Expand the capabilities of your Nikon NIKKOR Z 14-24mm f/2.8 S with the Haida M10 adapter ring. Specifically designed for this ultra-wide-angle lens, the adapter allows you to mount the Haida M10 filter holder and use 100mm slot-in filters for landscape, architectural and long-exposure photography. Take control of light and shape your images creatively. Lens-specific adapter ring for the Nikon NIKKOR Z 14-24mm f/2.8 S Enables the use of the Haida M10 filter holder Compatible with 100mm slot-in filters Precise solution for a lens without a conventional front filter thread Metal adapter ring The Haida M10 filter system for the Nikon Z 14-24mm Filter use on an ultra-wide-angle lens The Nikon Z 14-24mm f/2.8 S does not have a conventional front filter thread due to its design. The Haida M10 adapter ring connects the lens to the filter holder, allowing you to use the M10 filter system with this ultra-wide-angle lens. Flexible use of slot-in filters Once the M10 filter holder is mounted, you can use compatible 100mm slot-in filters. This is particularly useful for landscape photography, where you may want to darken the sky, control contrast or achieve longer exposure times. Important filter compatibility information Not compatible with M10 drop-in filters Due to the specific design of the Nikon Z 14-24mm f/2.8 S, the Haida M10 filter holder with this adapter ring cannot be used with M10 drop-in filters. Use only compatible 100mm slot-in filters with this combination. What to know before ordering Check compatibility This adapter ring is specifically designed for the Nikon NIKKOR Z 14-24mm f/2.8 S. Please check the exact lens model before ordering, as lens-specific adapters are not universally compatible. Filter holder sold separately The scope of delivery includes only the adapter ring. The compatible Haida M10 filter holder and slot-in filters are sold separately. Technical details at a glance Product type: Lens adapter ring for filter holder Brand: Haida Filter system: Haida M10 / M10 II Compatible lens: Nikon NIKKOR Z 14-24mm f/2.8 S Filter type: 100mm slot-in filters Material: Metal Purpose: Mounting the Haida M10 filter holder to the lens Note: Not compatible with M10 drop-in filters Haida part number: HD4620 Scope of delivery 1 x Haida M10 adapter ring for Nikon Z 14-24mm f/2.8 S

The Laowa 12mm F2.8 is an ultra-wide lens with a strongly curved front element – a regular screw-in filter or a standard adapter ring won't fit here. The Haida M10 adapter ring is exactly the solution: made specifically for the Laowa 12mm F2.8, it securely takes the Haida M10 filter holder (100 mm system). So you can use ND, GND and polarising filters even on this demanding wide-angle. Dedicated adapter ring made specifically for the Laowa 12mm F2.8 Makes the Haida M10 filter holder system (100 mm) usable on this lens Precise mount for a secure fit of the holder on the curved front element Made by Haida, matched to the M10 system Filters on an ultra-wide – finally possible Built for the curved front element Because the Laowa 12mm F2.8 has no standard filter thread, it needs a purpose-built adapter. This ring fits precisely on the lens and forms the base onto which the Haida M10 holder mounts – no makeshift solution, no vignetting from filters that are too small. Access to the whole M10 system Once mounted, the 100 mm drop-in filters of the Haida M10 system are open to you: graduated filters for the sky, ND filters for long exposures by the water, and the polariser built into the M10. Ideal for landscape, architecture and astro with this extreme wide-angle. What you should know before you order The adapter ring only This is the adapter ring only. The Haida M10 filter holder and the filters are not included – we stock those separately. Exactly for the Laowa 12mm F2.8 The ring is made precisely for the Laowa 12mm F2.8 and is not intended for other lenses. Check that you are using this exact lens before you order. Technical details at a glance Type: lens-specific adapter ring for filter holder System: Haida M10 (100 mm filter holder) Compatibility: Laowa 12mm F2.8 Brand: Haida Scope of delivery 1 x Haida M10 adapter ring for Laowa 12mm F2.8

The Laowa 10-18mm F4.5-5.6 is a compact ultra-wide zoom – but fitting filters isn't as simple as on a standard lens. This Haida adapter lets you use your M10 or M10-II filter holder on the Laowa, so ND, graduated ND and polarising filters work just as they do on your other lenses. Made specifically for the Laowa 10-18mm F4.5-5.6 Fits the Haida M10 and M10-II filter holders Two-piece: lens collar plus holder adapter ring Aluminium alloy construction Your filter system on the ultra-wide One system for all your lenses No need for a separate filter system just for the Laowa. The adapter makes the lens compatible with the M10 / M10-II holder you already own, so your 100 mm filters keep working. Secure fit The collar slides onto the lens barrel from behind until it seats firmly, then the holder adapter ring screws onto the front. The holder sits securely and rotates as usual. What it looks like in practice Long exposure on the coast You want to shoot a rocky coastline at 10 mm with silky water. Fit the adapter, attach the M10 holder, slide in an ND and a grad – and expose for several seconds without blowing out the sky. What to know before you order For this one lens only The adapter is made for the Laowa 10-18mm F4.5-5.6 and won't fit other lenses. Holder sold separately You get the adapter only. The Haida M10 or M10-II holder and filters are needed in addition. Vignetting at 10 mm At the widest setting some filter stacks may show dark corners. Test your combination at the wide end. Technical details at a glance Manufacturer: Haida Manufacturer part number: HD4460 Compatible lens: Laowa 10-18mm F4.5-5.6 Compatible holders: Haida M10, Haida M10-II Material: aluminium alloy Design: rear lens collar and front holder adapter ring In the box 1 x Haida M10 adapter for Laowa 10-18mm F4.5-5.6 (lens collar and adapter ring)

Haida 95 Lens adapter suitable for M10 and M10-II filter holder The Lens adapter for the Haida M10 and M10-II filter system are specially developed rings that are attached to the lens and allow the filter holder to be mounted. If you have different lenses, a lens adapter is very useful as it is suitable for every lens. You do not need a separate filter holder for each lens, which saves costs and increases efficiency.

The protective cap fits all M10 adapter rings from 37-82 mm diameter and protects your lens during transport.Included in delivery:1 x Protection cap for M10 adapter ring