Peak Design Camera Straps – Perfect for your camera

Bold Pack for Capture Peak Design black CB-BK-1 Bolt Pack contains 2 replacement sets of clamping bolts for Capture: one pair of thumb-drive bolts which clamp to any strap up to 1.5 cm thick and one pair of hex-drive bolts which clamp to any strap up to 1.6 cm thick. Scope of delivery:1 x screw set for Peak Design Capture in black

Peak Design Leash Camera Strap – Coyote: Your camera, your adventure, your freedom You don't just hold a camera in your hands – you capture moments, emotions and stories. But what if you could concentrate fully on your subject without worrying about uncomfortable, impractical straps? The Peak Design Leash camera strap in Coyote is not just a camera strap. It is a revolution for minimalists, adventurers and creatives who want to combine maximum flexibility with uncompromising safety. Ultra-light, versatile and quickly adjustable – this strap puts an end to restrictions and lets you become completely one with your camera. Minimalist & ultra-light – yet extremely robust Feel that? Almost nothing. That's because the Peak Design Leash is so slim and light that you hardly notice it. And yet it is unshakably strong – thanks to high-quality, tear-resistant nylon fabric with a soft but durable surface. It fits perfectly without chafing or slipping. A strap that becomes one with you and never slows you down. Quick & smart adjustment – for every situation Whether you want to wear your camera casually around your neck, as a shoulder strap or crossbody – with the clever dual aluminum buckles, you can adjust the length in seconds. No annoying fiddling, no cumbersome repositioning. A single, fluid movement is all it takes – and your strap adapts to your moment. Magical flexibility thanks to the Anchor Link system A tripod shoot here, a spontaneous handheld photo there – you don't want to struggle with cumbersome attachments? The Peak Design Anchor Link system makes it possible. The lightning-fast quick-release buckles are bombproof, but release in seconds when you want to remove the strap. No stress, no delay – pure freedom. Technical details Material: High-strength, abrasion-resistant 19mm nylon strap Color: Coyote (tactical beige-brown with a sophisticated finish) Adjustable length: 83 cm to 145 cm Maximum load capacity: 90 kg (safe for any camera) Weight: Only 86 g – hardly noticeable, but incredibly strong Attachment: Anchor-Link system with 4 anchor points (can hold up to 90 kg per anchor) Compatibility: Fits almost any camera, binoculars or other devices with eyelets Scope of delivery 1x Peak Design Leash camera strap – Coyote 4x Anchor-Links for maximum flexibility 1x anchor mount for tripod thread attachment 1x storage bag for transport and protection Feel the freedom with the Peak Design Leash in Coyote. No compromises. No ballast. Just you, your camera and your creative flow. Get it now – and turn every shot into an adventure!

Replacement Anchor Loops for Peak Design Camera Straps and Wrist Loops The four anchor loops are the perfect complement for the Slide, Slide Lite and Leash camera straps, the Clutch hand strap and the Cuff wrist strap. This allows Peak Design products to be used for multiple cameras. It eliminates the hassle of remounting. Shallower lugs and stronger anchor cords. The new features of this kit are just great. For example, in addition to the material - aluminum - the fasteners are a quarter flatter than their predecessors. The anchor loops have been equipped with slightly beveled washers, which makes it much easier to snap them into the plug-in closures. The very stable loops can be easily attached in small round eyelets or narrow flat eyelets - without split rings. The anchor loops are maximally compatible with Peak Design products. Resistance and resilience - thanks to Dyneema cord. Ideal to withstand high loads, the cords of the anchor loops were made of the resistant polyethylene-based plastic - Dyneema. This allows the anchor cords to withstand loads of up to 90 kg. Color coding for timely replacement of worn anchor loops A red core in the anchor loops is used for color coding. During intensive use, the material can get tired, if the red core is visible, it means: this anchor loop should be replaced. Technical details Material: Dyneema, thermoplastic materialThe diameter of the "cord" is: 1.7mm Color:  black Scope of delivery 4 x Anchor attachment loops 3rd generation

Peak Design Slide Lite The newly updated Slide Lite packs the unrivaled versatility of Slide into a smaller package, perfectly suited for mirrorless and light DSLR cameras. Wear Slide Lite as a sling, neck, or shoulder strap. Seatbelt-style nylon webbing has a smooth side that glides over clothing in sling mode and a grippy side that prevents slipping in shoulder mode. Dual quick-adjusters provide instant access and easy reconfiguration. Unique Anchor Link system connects quickly and dual points of connection keep your camera more stable than traditional sling straps. Plus, Anchors now work with any 3rd party tripod plate or L-bracket, as well as any Peak Design plate. Updates include: new silicone grip, upgraded webbing, lower profile strap/hardware transitions. Anchor connectors have been updated to be smaller, faster, and more secure. Total Stability Highly stable camera carry via 2 configurable points of connection Holds all cameras Works with heaviest of pro cameras or binoculars Hyper Adjustable Huge range of length adjustment, made possible by 2 quick-pull adjusters So smooth Webbing glides over clothing for quick camera access No bulky d-rings Connects to strap loops or bottom of camera body via ultra low-profile Anchor Mount hardware Whats new Revamped Anchors More secure, fast, and lower profile than ever. New canted/angled Anchors for effortless 1-handed connection. New thin Anchor cords fit through more camera strap loops/eyelets. 25% slimmer Anchor housing hardware. Still strong as ever Anchors still hold 200 lbs (90 kg) Works with any tripod or L-brackets Anchors work with any Peak Design or 3rd party tripod plate, including L-brackets Anchor Mount New low-profile Anchor Mount is strong, versatile, and leaves a tiny footprint Webbing upgrade New ultra-smooth nylon webbing with tighter, more durable weave Better Grip Upgraded silicone grip is more effective and durable Overmolded Hardware Strap molded directly into adjustment hardware for significantly lower-profile design Specs Material: ballistic NylonLength: up to 144 cm (adjustable)width: 3,2 cmweight: 141 gHolds: up to 90 kgStandard Plate: Aluminium, 38 x 38 x 14 mm, with 1/4-inch-screw     Whats in the box 1x Slide Lite camera strap1x 4mm hex wrench4x Anchor connectors1x Anchor Mount1x microfiber pouch

Peak Design Camera Strap Rope Long – Kelp The Peak Design Rope Camera Strap Long in Kelp is the ideal companion for photographers who value comfort, security, and flexibility when using their camera. With its robust rope design, it offers maximum load capacity and ensures that your camera always remains secure and within easy reach. The Rope Strap from Peak Design impresses with its minimalist yet extremely durable design. Made from high-quality, weather-resistant material, it adapts ergonomically to your body and can be carried comfortably over your shoulder or around your neck. The clever Anchor Links allow for quick attachment and removal of the camera—ideal for dynamic photo situations or when switching between different cameras. The rope design reduces pressure points and allows for long periods of wear without fatigue. Thanks to the Anchor Links, you can remove your camera in seconds or switch between multiple devices—perfect for outdoor, street, or travel photography. Special features and advantages Robust, durable rope material Elastic, abrasion-resistant construction Flexible use as a shoulder or neck strap Quick attachment thanks to the Peak Design Anchor System The Peak Design Rope Strap is compatible with all cameras that have long 1/4-inch threaded connections, including: Canon EOS series Nikon DSLR and mirrorless models Sony Alpha series Fujifilm X series Panasonic Lumix Technical details Length: approx. 134 cm (long) Material: High-quality, weatherproof rope and nylon Weight: approx. 68 g Load capacity: up to 80 kg Color: Kelp Scope of delivery 1 x Peak Design Rope Camera Strap Long 4 x Peak Design Anchor Links

Peak Design Standard Plate PL-S-3The standard plate clamping plate only fits the Capture Clip v3. It is an ideal supplement if you use the clip for several cameras, because separate clamping plates for each camera save the need to change clamping plates when changing cameras.Arca-Swiss-compatible clamping profile on all four sides of the plate1/4 screw for attaching the plate to the tripod thread of a cameraScrew can be moved to adjust the position of the plateImportant: Only suitable for Capture Clip v3. Too flat for older clips.Eyelets for attaching anchor loops to each corner of the plate.Technical detailsMaterial: aluminium, PVCDimensions: 7 x 38 x 38 mmWeight: 14 gClamping profile: Arca-Swiss compatibleCamera screw: 1/4 inchScope of delivery1 standard plate clamping plate1 hexagon socket wrench (4 mm)referenceThe 2017 version of the Standard Plate cannot be used for older capture clip models. The plate can be used, but because of the flatter profile, the distance between the top of the plate and the top of the clip would be too small to insert the plate into the clip with a camera mounted on it.

Peak Design Anchor Mount   Attach your Peak Design strap (or any standard OEM neck/hand strap) directly to the bottom of your camera in the most low-profile, unobtrusive way possible. Unlike a tripod plate, Anchor Mount is so small and slim that it won’t hinder access to battery compartments or flip screens. Plus, when you connect one end of your strap to Anchor Mount your camera will hang with the lens facing downward—this gives you far more stability and comfort when using longer lenses. Ultra-strong machined/anodized aluminum construction. Note that Anchor Mount is not tripod or Capture compatible. We often recommend attaching 1 end of your PD strap to your camera's side strap lug (opposite the grip) and the other end to the bottom. These 2 connection points let the camera hang with the lens facing down for greater comfort and stability, especially with longer primes and zooms. Anchor Mount is the most low-profile, unobtrusive connection point available for PD Anchors and standard camera straps.   Works with all pd StrapsAttach PD Anchors to increase your carry options with any of our straps. Compatible with all versions of our Anchors and straps.   Works with oem StrapsAttach any standard camera neck strap or wrist strap. Works with strap ends up to 11mm wide.   Twist resistantUltra-secure 4mm hex drive with anti-twist pad.   Fits any cameraScrews into any standard 1/4""-20 tripod socket.   Super strongRugged, weatherproof machined/anodized aluminum construction. Note: Anchor Mount is not compatible with tripods or Capture system. If you frequently use a tripod or Capture, check out our Standard Plate.     Whats in the box1 x Anchor Mount1 x 4mm hex key   MaterialsAnodized aluminum plate with hard rubber anti-twist pad, turned/machined stainless steel hex-drive screw   WeightUnpackaged: 18 g (.71 oz)   SizeLength: 30 mm (1.2 in) Width: 20 mm (.79 in)   Strength ratingCan withstand well over 200 lbs (90 kg), making Anchor Mount safe for use with the largest of professional cameras.   WarrantyGuaranteed for life.  

Bold Pack for Capture Peak Design silver CB-SV-1   Bolt Pack contains 2 replacement sets of clamping bolts for Capture: one pair of thumb-drive bolts which clamp to any strap up to 1.5 cm thick and one pair of hex-drive bolts which clamp to any strap up to 1.6 cm thick.   Scope of delivery:1 x screw set for Peak Design Capture in silver

Peak Design Camera Strap Rope Standard – Kelp The Peak Design Rope Camera Strap Standard in Kelp is the ideal companion for photographers who value comfort, security, and flexibility when using their camera. With its robust rope design, it offers maximum load capacity and ensures that your camera always remains secure and within reach. The Rope Strap from Peak Design impresses with its minimalist yet extremely durable design. Made from high-quality, weather-resistant material, it adapts ergonomically to your body and can be carried comfortably over your shoulder or around your neck. The clever Anchor Links allow for quick attachment and removal of the camera—ideal for dynamic photo situations or when switching between different cameras. The rope design reduces pressure points and allows for long periods of wear without fatigue. Thanks to the Anchor Links, you can remove your camera in seconds or switch between multiple devices—perfect for outdoor, street, or travel photography. Special features and advantages Robust, durable rope material Elastic, abrasion-resistant construction Flexible use as a shoulder or neck strap Quick attachment thanks to the Peak Design Anchor System The Peak Design Rope Strap is compatible with all cameras that have standard 1/4-inch threaded connections, including: Canon EOS series Nikon DSLR and mirrorless models Sony Alpha series Fujifilm X series Panasonic Lumix Technical details Length: approx. 120 cm (standard) Material: High-quality, weatherproof rope and nylon Weight: approx. 65 g Load capacity: up to 80 kg Color: Kelp Scope of delivery 1 x Peak Design Rope camera strap standard 4 x Peak Design Anchor Links

Peak Design PROpad Elegant, simple and practical. The new version of the Peak Design PROpad has been adapted and improved according to customer requirements. Attach your camera quickly and easily to your belt or backpack. With the Capture Pro, attaching and removing your camera has never been easier. With Peak Design's robust system, even your large camera plus lens is always with you comfortably and safely. Scope of delivery 1 x Peak Design PROpad PP-2  

Peak Design Cuff hand strap in Coyote – The ultimate hand strap for your camera Imagine holding your camera firmly in your hand – with a security so effortless and reliable that you can fully concentrate on the moment. No shaking, no stress, no fear of sudden mishaps. The Peak Design Cuff Hand Strap in Coyote is your invisible guardian angel, unobtrusive but uncompromisingly there for your camera. Your trusty companion, whether you're capturing breathtaking landscapes, dynamic street photography sessions or intimate portraits, this little masterpiece gives you the freedom you need. Unrivaled security and comfort Security often feels bulky – but not with the Cuff hand strap. Thanks to the innovative anchor link system, your camera can be securely attached and released just as quickly. The high-quality nylon webbing with reinforced stitching not only makes it comfortable to wear, but also completely reliable. The fully adjustable length ensures that the loop fits perfectly – not too loose, not too tight, but just right. Stylish design in coyote Form meets function. The subtle coyote color gives the hand strap an elegant, earthy look that blends perfectly with your gear – whether in the city or in the middle of the wilderness. The magnetic clasp ensures a tidy wrist when you are not using the strap. With a single movement, it becomes a stylish wristband that you will hardly notice. Versatility for all situations This hand strap adapts to you – not the other way around. Whether you want to hold a DSLR, a mirrorless camera or even binoculars securely, the Cuff hand strap can handle any challenge. The robust Peak Design Anchors can easily support up to 90 kg and guarantee maximum stability, no matter where your adventure takes you. Technical features Material: High-quality nylon webbing with Hypalon accents Attachment system: Peak Design Anchor Links (up to 90 kg load capacity) Length: Adjustable for a perfect fit Closure: Magnetic, for easy carrying as a wristband Color: Coyote - stylish, understated and modern Contents 1x Peak Design Cuff Hand Strap Coyote 2x Peak Design Anchors (safe for up to 90 kg load) 1x microfiber bag for storage With the Peak Design Cuff Hand Strap in Coyote, you'll enjoy complete freedom of movement and security in any situation. Feel the control, the confidence and the elegance – and shoot as if there were no limits. Grab it and secure your freedom!

Camera strap Peak Design Leash black The Leash Black from Peak Design is an optimised camera strap for small cameras. The essentials: Flatter buckles, slightly tapered discs on the matching anchor loops that make it easier to engage and thin buckles for small straps. The new and extremely flat anchor mount plate for attaching the Leash Black to the tripod thread of the camera as well as improved material properties, aluminium bar buckles and Hypalon finger loops for adjusting the optimum strap length round off the innovations. Shoulder strap, neck strap or sling strap – extremely versatileThe Leash Black is a real all-rounder thanks to its various functions. It can be used as a shoulder harness, neck harness or sling harness. The Leash Black as a sling strap, i.e. worn diagonally around the upper body with the camera hanging at the side of the body, offers the greatest wearing and operating comfort. The camera is in your hand in a flash and snapshots are safely in the box. For smaller camera types such as SLR or DSLM camerasThe Leash Black is ideal for smaller camera types such as entry-level DSLRs, mirrorless system cameras or compact cameras. Perfectly thought-out and secure - thanks to the anchor loop and plug-in fastenerLike all other Peak Design straps, the Cuff-Black also has a clever fastening system consisting of a plug-in fastener on the wrist strap and a sturdy anchor loop for attaching to the camera. Both components can be easily separated from each other despite their extremely secure connection. This makes it quick and easy to attach and detach from the camera. The hand strap can either be attached to a belt or directly to the camera tripod thread using an adapter. Easier engagement of the anchor loops thanks to thin laces and bevelled discs The plug-in fastener of the Cuff-Black alone is a quarter flatter than the previous Cuff. The bevelled discs on the anchor loops make it easier to engage the plug-in fastener. The thin but very sturdy loops are easier to attach to cameras with narrow flat or small round lenses, making the use of split rings superfluous. These new anchor loops fit into the buckles of both older products and the 2017 Leash camera strap. Extremely flat camera plate for attachment to the tripod thread of a cameraWith the small and very flat anchor mount plate, the Leash Black can be attached to the tripod thread of your camera. Compared to interchangeable plates, this plate does not add much bulk. The anchor loops are attached to the aluminium plate using two eyelets. Space-saving storage Since the Leash Black is flat and narrow, it can be rolled up and stowed in a jacket pocket if required. The leash is narrow and flat. Adjust the optimum harness length thanks to aluminium bar buckles and Hypalon loopsThe aluminium bar buckles and Hypalon loops of the Leash Black make it quick and easy to adjust the optimum harness length. Ultra-smooth and torsion-resistant nylon fabric ensures better durability thanks to a tighter weaveThe material and design of the cuff loop have been optimised – a new, tightly woven nylon fabric is extremely durable. The smooth surface provides a comfortable feel and glides gently along clothing when used as a sling strap. The improved material does not twist as quickly. The load points have been reinforced and the buckle is made from a mix of metal and plastic. The aluminium stopper and the Hypalon application on the outside of the loop round off the high quality. Technical detailsMaterial: nylon, aluminium, HypalonColour: blackLength: approx. 81-145 cm (adjustable)Belt width: approx. 1.9 cmLoad capacity: 90 kg (anchor loops) Scope of delivery1 strap, 4 anchor loops, 1 anchor mount camera plate  

Peak Design Long Leather Camera Strap in Black This high-quality leather camera strap combines stylish design with maximum comfort. Thanks to its durable materials and thoughtful construction, you can carry your camera safely and elegantly—ideal for everyday use or professional shoots. The leather camera strap in black impresses with its minimalist, modern design without obtrusive seams or large metal fittings. The high-quality leather sits comfortably on your shoulder and adapts to your body, while the low-profile hardware holds your camera securely. The strap is sturdy, flexible, and durable, perfect for use with mirrorless cameras or DSLR systems. Features and benefits Elegant, timeless black leather for style-conscious photographers Slim profile avoids annoying bulkiness Easy to attach thanks to integrated fasteners Keeps your camera handy at all times without restricting your freedom of movement The strap is universally applicable and compatible with: Digital single-lens reflex cameras (DSLR) Mirrorless system cameras Technical details Length: 134cm Material: Premium leather Weight: approx. 61 g Color: Black Low-profile metal hardware integrated Scope of delivery 1 × Peak Design leather camera strap, long, black 2 × Quick-release adapter

Peak Design Camera Strap Rope Long – Black The Peak Design Rope Camera Strap Long in Black is the ideal companion for photographers who value comfort, security, and flexibility when using their camera. With its robust rope design, it offers maximum load capacity and ensures that your camera always remains secure and within reach. The Rope Strap from Peak Design impresses with its minimalist yet extremely durable design. Made from high-quality, weather-resistant material, it adapts ergonomically to your body and can be carried comfortably over your shoulder or around your neck. The clever Anchor Links allow for quick attachment and removal of the camera—ideal for dynamic photo situations or when switching between different cameras. The rope design reduces pressure points and allows for long periods of wear without fatigue. Thanks to the Anchor Links, you can remove your camera in seconds or switch between multiple devices—perfect for outdoor, street, or travel photography. Special features and advantages Robust, durable rope material Elastic, abrasion-resistant construction Flexible use as a shoulder or neck strap Quick attachment thanks to the Peak Design Anchor System The Peak Design Rope Strap is compatible with all cameras that have long 1/4-inch threaded connections, including: Canon EOS series Nikon DSLR and mirrorless models Sony Alpha series Fujifilm X series Panasonic Lumix Technical details Length: approx. 134 cm (long) Material: High-quality, weatherproof rope and nylon Weight: approx. 68 g Load capacity: up to 80 kg Color: Black Scope of delivery 1 x Peak Design Rope Camera Strap Long 4 x Peak Design Anchor Links

Peak Design Camera Strap Rope Standard – Ocean The Peak Design Rope Camera Strap Standard in Ocean is the ideal companion for photographers who value comfort, security, and flexibility when using their camera. With its robust rope design, it offers maximum load capacity and ensures that your camera always remains secure and within reach. The Rope Strap from Peak Design impresses with its minimalist yet extremely durable design. Made from high-quality, weather-resistant material, it adapts ergonomically to your body and can be carried comfortably over your shoulder or around your neck. The clever Anchor Links allow for quick attachment and removal of the camera—ideal for dynamic photo situations or when switching between different cameras. The rope design reduces pressure points and allows for long periods of wear without fatigue. Thanks to the Anchor Links, you can remove your camera in seconds or switch between multiple devices—perfect for outdoor, street, or travel photography. Special features and advantages Robust, durable rope material Elastic, abrasion-resistant construction Flexible use as a shoulder or neck strap Quick attachment thanks to the Peak Design Anchor System The Peak Design Rope Strap is compatible with all cameras that have standard 1/4-inch threaded connections, including: Canon EOS series Nikon DSLR and mirrorless models Sony Alpha series Fujifilm X series Panasonic Lumix Technical details Length: approx. 120 cm (standard) Material: High-quality, weatherproof rope and nylon Weight: approx. 65 g Load capacity: up to 80 kg Color: Ocean Scope of delivery 1 x Peak Design Rope camera strap standard 4 x Peak Design Anchor Links

Peak Design Cuff in black   Total peace of mind in a tiny, low-profile package. The all-new Cuff is the most elegant, unobtrusive way to protect your camera from accidental drops. Quickly and securely connects to any camera, binoculars, or other device using our unique Anchor Link system. Wrist loop magnetically locks in the open position, or comfortably cinches down on your wrist for added security. New all-custom aluminum hardware. When not in use, Cuff stores as a bracelet for quick accessibility.TOTALLY REDESIGNED New adjusterAnodized aluminum adjuster locks Cuff in an open position or cinches to your wrist. Magnets, yo!Adjustable magnet lets you wear Cuff as a bracelet when not in use. Slimmer Anchor CordsThinner Anchor cords fit through more camera strap eyelets, yet still hold 200 lbs (90kg) each. New anchor shapeAngled shape enables effortless 1-handed connection. Upgraded WebbingStrap has increased durability, smoothness, and twist resistance. Keep open or cinchedNew adjuster hardware lets you keep Cuff locked in an open loop so you can easily fit your hand through. Pull the adjuster to cinch Cuff around your wrist for more security. Automatic drop protectionIf you drop your camera, Cuff automatically cinches down on your wrist, which in turn will warm the cockles of your heart. Not just for CamerasConnect Cuff to binoculars, GoPros, rangefinders, tools, and more. Ultralight and compactKeep Cuff on your camera, on your wrist, or in your pocket. Cuff uses ultralight materials and hardware for total security with a minimal footprint. Super strongStrong enough to hold any pro camera/lens/accessory combo. Anchors each hold over 200lbs (90kg) and feature extreme abrasion-resistance. Fits (almost) allCuff's wrist loop can fit palms that are over 5 in (13 cm) wide. Them's some big hands right there.     [youtube;xKojw12egwg;560;315]     Whats in the Box2 x Anchors (3rd generation, thinner anchor cords)1 x Cuff Camera Wrist Strap1 x Microfiber Pouch   Wrist loop sizeDiameter when open: 9.7 cm (3.82 in), but easily fits hands 5+ inches wide diameter when cinched: 4.5 cm (1.75 in)   Strap Width19 mm (0.75 in)   MaterialsStrap: Seatbelt-style nylon webbing, anodized aluminum adjuster hardware, Hypalon® and leather accents (leather on Ash only) Connectors: Glass-reinforced nylon Links with stainless steel springs, 2-layer anti-abrasion woven thermoplastic Anchor cord, thermoplastic Anchor overmolding   Strength ratingAnti-abrasion thermoplastic-corded Anchors can withstand over 200 lbs (90 kg), making Cuff safe for use with the largest of professional cameras.   Magnet ratingAdjustable magnetic clasp (for bracelet configuration) is safe for use around electronics.   WarrantyGuaranteed for life.  

Peak Design Capture silver clip and plate  For belt or strap - ultra-stable camera clip  Super practical and comfortable. With the Capture Clip V3 Clip camera clip, the camera can be carried on a rucksack strap, shoulder strap, trouser belt or waistband. This has the advantage that both hands are free and the camera does not dangle, even when there is a lot of movement, but remains firmly in position. The Capture Pro Clip is the perfect companion for everyday life and especially for outdoor tours such as climbing or cycling. It is suitable for SLR cameras, compact cameras and mirrorless system cameras.   Easy grip for spontaneous snapshots The Capture Clip V3 Clip is easy to handle. Once the clip has been positioned on the belt or strap, all you have to do is snap the camera plate attached under the camera into the multi-secured holder and you're done. For spontaneous snapshots, the camera can simply be removed from the Capture Clip V3 clip and then reattached to the clip. Incl. PROplate camera plate – combines the advantages of all previous camera plates The advantages of the ARCAplate, DUALplate and MICROplate camera plate attachments are all combined in the PROplate. Thanks to the all-round Arca profile in the basic configuration, this camera plate can always be inserted into the clip offset by 90 degrees in all four directions. This means that the camera lens can always be inserted facing downwards. The great thing about this is that the Capture-Clip camera plate does not need to be replaced with a corresponding interchangeable plate. Thanks to its compatibility with the quick-release coupling, the camera can be attached directly to a tripod from the Capture Clip. However, thanks to its width of 5.2 cm, the PROplate has a stable and suitable support surface for large SLR cameras.    PROplate camera plate with eyelets for the anchor loops of the leash, cuff, slide and clutch The anchor loops from the Peak Design System can be attached to four eyelets in the corners of the PROplate. This enables quick and flexible movement between the Capture Clip V3 Clip, slides such as the Clutch and Cuff hand loops and the Slide and Leash straps. For use as a tripod head with quick-release coupling - tripod thread on the back To ensure that the Capture Clip V3 Clip can be attached to almost any camera tripod or panhead, there is a removable ¼-inch adapter on the 3/8-inch internal thread on the back. This also allows it to be used as a quick-release coupling for a ball head. Protects against falling out or theft - multiple protection on the camera plate holder To prevent the camera from being stolen or falling out of the Capture Clip V3 Clip, the camera plate can be secured in multiple ways. The grid lock prevents the camera from slipping out of the holder; the camera can only be removed by pressing and holding the red release button. The release button itself can be locked by turning the upper part 90 degrees, and the camera plate can also be clamped in the holder with a locking screw.   Fits belts and straps with a thickness of up to 1.3 cm and a width of up to 7.6 cm The Capture Clip V3 clip can be attached to all belts and straps with a maximum thickness of 1.3 cm and a width of 7.6 cm. The Capture Clip V3 Clip is easy to attach: the unscrewed clip is unfolded, then attached to the belt or strap and finally screwed back on using the two clamping screws.   Technical details Material: aluminium, etc.Dimensions: approx. 2.0 x 8.3 x 4.0 cmWeight: approx. 70 g (without camera plate)Carrying capacity: approx. 90 kg (200 lbs.)Camera screw: 1/4 inch   Scope of delivery 1 camera clip V3 in silver1 clamping plate (Arca-Swiss compatible)1 hexagon socket wrench   Note The Capture Clip v3 from 2017 can accommodate all Peak Design camera plates released up to that point. However, the new flatter standard plate discs cannot be used for older Capture Clip models. Although these plates can be used, the distance between the top of the plate and the top of the clip would be too small to insert the plate into the clip with a camera mounted on it.

Your new companion: the Peak Design Slide Lite camera strap in Coyote Imagine you're out and about – whether you're in the wild, in bustling cities or at an event full of magical moments. You reach for your camera and it fits perfectly in your hand. Why? Because you're using the Peak Design Slide Lite Coyote camera strap – your trusty companion that perfectly combines comfort, style and functionality. This accessory will not only revolutionize your workflow, but also take your photography experience to a new level. Flexible use for every moment Whether you wear the strap around your neck, across your shoulder, or over your shoulder in the classic way, the Slide Lite effortlessly adapts to your style and your needs. Thanks to the fully adjustable length, you can switch between different carrying methods in seconds, giving you flexibility in every situation. Comfort meets safety The Slide Lite combines cushioned comfort with complete security. The inside of the strap is lined with a non-slip silicone layer that ensures the strap stays exactly where it should – even when you're on the move. You'll be surprised how light and comfortable it feels on your skin, even during extended wear. Robust elegance in a coyote design With its elegant coyote color and high-quality materials, the Slide Lite not only turns heads, but also withstands the toughest conditions. The double-layer nylon fabric structure is incredibly durable and lightweight. In addition, the innovative Peak Design Anchor connections are not only easy to use, but also keep your camera safe. Technical features at a glance Material: High-strength nylon fabric with silicone coating Adjustable length: 99 cm – 145 cm Width: 3.2 cm – ideal for compact and mirrorless cameras Load capacity: Up to 90 kg – more security for your valuable equipment Weight: Only 141 g – light yet extremely robust Scope of delivery In the box you will find everything you need to get started right away: Peak Design Slide Lite Coyote camera strap 4 Anchor connections for maximum flexibility Anchor mount plate for attachment to the tripod mount Microfiber storage bag – ideal for on the go Grab the Peak Design Slide Lite in Coyote and make it part of your photographic adventures. Once you've tried it, you'll never want to be without it – we promise!

Peak Design Camera Strap Slide Ocean – The versatile professional strap for your camera The Peak Design Slide camera strap in Ocean is the perfect solution for photographers who value comfort, flexibility, and style. Whether worn around the neck, over the shoulder, or as a sling, this strap adapts perfectly to your working style and gives you maximum control over your camera. The Slide Ocean from Peak Design is more than just a camera strap – it is a well-designed premium accessory for professionals and ambitious amateur photographers. With its wide, padded nylon strap, it is comfortable to wear, even during longer shoots with heavy equipment. Thanks to the proven Anchor Link system, you can attach or remove the strap in seconds – without any tools. The high-quality workmanship, combined with the elegant blue design (Ocean), makes the Slide not only functional but also visually appealing. Special features and advantages Versatile carrying options: Use the harness as a shoulder strap, neck strap, or sling – depending on the situation and your preference. Ultra-fast length adjustment: With the aluminum quick-release buckles, you can adjust the harness to the ideal length in a flash. Robust materials: The Slide is made of tear-resistant, abrasion-resistant nylon fabric with Hypalon reinforcements for maximum durability. Secure fastening system: The patented Anchor Links hold up to 90 kg and offer maximum safety for your camera. Compatibility Compatible with almost all popular DSLR and mirrorless cameras Works with Peak Design Capture Clip (sold separately) Also ideal for binoculars or other devices with matching eyelets. Technical details Material: Woven nylon, aluminum, Hypalon Length adjustment: 99–145 cm Strap width: 4.5 cm Weight: approx. 148 g Load capacity: up to 90 kg Color: Ocean (blue) Scope of delivery 1x Slide camera strap Ocean 4x Anchor connections 1x Anchor mount (tripod thread adapter) 1x Hex key 1x Microfiber bag

Peak Design Slide black Versatile camera strap - neck strap, shoulder strap or sling strap With its enormous versatility, the Slide is the flagship of the Peak Design strap system. The Slide is a real all-rounder as it can be used as a neck strap, shoulder strap or sling strap. It is also ideal as a camera strap for SLR cameras or mirrorless system cameras. Slide as a sling strap - convenient and quick camera access The Slide Lite as a sling strap, i.e. worn diagonally around the upper body with the camera hanging on the side of the body, offers the greatest wearing and operating comfort. The camera is at hand in a flash and snapshots are safely in the box. Stable position when used as a sling strap or shoulder strap When the Slide is used as a shoulder strap or sling strap, the camera attached to the strap does not dangle around thanks to its stable position. Perfectly thought-out and secure - thanks to the anchor loop and buckle The Slide has a clever fastening system consisting of buckles on the actual strap and two sturdy anchor loops for attaching to the camera. Both components can be easily separated from each other despite the extremely secure connection. This enables quick and easy attachment and detachment from the camera. The loops can be attached either to a strap or directly to the camera tripod thread using the enclosed camera plate. Anchor loops also compatible with other Peak Design products Since the anchor loops are also compatible with the plug-in fasteners of other Peak Design products, the various straps and hand loops can be easily interchanged. Simple handling for great effect: remove the Slide camera strap from the anchor loops on the camera and simply clip in another strap or hand strap. Attach the Slide to the tripod thread of a camera using an Arca-compatible camera plate The Slide can be attached to the tripod thread of the camera using the standard plate camera plate. This turns the strap into a sling strap. The anchor loops are attached to the plate with an all-round Arca profile using two eyelets. This allows the camera to be quickly attached to a panhead with a compatible quick-release coupling. The camera plate can also be used for the CapturePro and Capture Clip. Belt width and inner padding = high wearing comfort without bulk The weight distribution is optimised thanks to the width of the slide of 45. A thin inner padding prevents it from cutting into the skin and ensures a high level of comfort. Thanks to the relatively wide support surface in combination with the integrated padding, the Slide is extremely comfortable to wear and can even be used for a heavy professional SLR camera. Smooth = sling strap, non-slip = shoulder strap The different textures of the Slide have a good reason: if it is used as a sling strap, the strap glides gently along the clothing. When used as a shoulder strap, the side with the non-slip rubber strip prevents the Slide from slipping too easily or sliding off the shoulder. Perfect upper material – Tear-resistant and quite smooth The material of the Slide is made of ballistic nylon. Similar to a seatbelt in a car, this material is very resistant and tear-proof. Constant contact with clothing is harmless, as the material is gentle on the material thanks to its smooth and soft texture. Fold-out metal straps – for adjusting the optimum belt length With the help of two fold-out metal brackets on the slide, the belt length can be quickly and easily adjusted to the optimum length - even single-handedly. Technical details Material: ballistic nylonLength: 99 - 137 cm (adjustable)Width: 4.5 cmWeight: 171 gCapacity: up to 90 kgColour: blackStandard plate: made of aluminium, 38 x 38 x 14 mm, with 1/4-inch camera screw Scope of delivery 1 SL-BK-3 slide carrying strap, 4 micro anchor loops, 1 anchor mount with 1/4’ connection, 1 Allen key (4 mm)

Peak Design Leash ash The Leash Ash from Peak Design is an optimised camera strap for small cameras. The essentials: Flatter buckles, slightly tapered discs on the matching anchor loops, which make it easier to engage, and thin buckles for small straps. The new and extremely flat anchor mount plate for attaching the Leash Black to the tripod thread of the camera as well as improved material properties, aluminium bar buckles and Hypalon finger loops for adjusting the optimum strap length round off the innovations. Shoulder strap, neck strap or sling strap – extremely versatileThe Leash Black is a real all-rounder thanks to its various functions. It can be used as a shoulder harness, neck harness or sling harness. The Leash Black as a sling strap, i.e. worn diagonally around the upper body with the camera hanging at the side of the body, offers the greatest wearing and operating comfort. The camera is in your hand in a flash and snapshots are safely in the box. For smaller camera types such as SLR or DSLM camerasThe Leash Black is ideal for smaller camera types such as entry-level DSLRs, mirrorless system cameras or compact cameras. Perfectly thought-out and secure - thanks to the anchor loop and plug-in fastenerLike all other Peak Design straps, the Cuff-Black also has a clever fastening system consisting of a plug-in fastener on the wrist strap and a sturdy anchor loop for attaching to the camera. Both components can be easily separated from each other despite their extremely secure connection. This makes it quick and easy to attach and detach from the camera. The hand strap can either be attached to a belt or directly to the camera tripod thread using an adapter. Easier engagement of the anchor loops thanks to thin laces and bevelled discs The plug-in fastener of the Cuff-Black alone is a quarter flatter than the previous Cuff. The bevelled discs on the anchor loops make it easier to engage the plug-in fastener. The thin but very sturdy loops are easier to attach to cameras with narrow flat or small round lenses, making the use of split rings superfluous. These new anchor loops fit into the plug-in fasteners of both older products and the 2017 Leash camera strap. The Cuff-Black buckle alone is a quarter flatter than the previous Cuff. The tapered discs on the anchor loops make it easier to engage the buckle. The thin but very sturdy loops are easier to attach to cameras with narrow flat or small round lenses, making the use of split rings superfluous. These new anchor loops fit into the buckles of both older products and the 2017 Leash camera strap. Extremely flat camera plate for attachment to the tripod thread of a cameraWith the small and very flat anchor mount plate, the Leash Black can be attached to the tripod thread of your camera. Compared to interchangeable plates, this plate does not add much bulk. The anchor loops are attached to the aluminium plate using two eyelets. Space-saving storage Since the Leash Black is flat and narrow, it can be rolled up and stowed in a jacket pocket if required. The leash is narrow and flat. Adjust the optimum harness length thanks to aluminium bar buckles and Hypalon loopsThe aluminium bar buckles and Hypalon loops of the Leash Black make it quick and easy to adjust the optimum harness length. Ultra-smooth and torsion-resistant nylon fabric ensures better durability thanks to a stronger weaveThe material and design of the cuff loop have been optimised – a new, tightly woven nylon fabric is extremely durable. The smooth surface provides a comfortable feel and glides gently along clothing when used as a sling strap. The improved material does not twist as quickly. The load points have been reinforced and the buckle is made from a mix of metal and plastic. The aluminium stopper and the Hypalon application on the outside of the loop round off the high-quality finish.   Technical detailsMaterial: nylon, aluminium, Hypalon, nubuck leatherColour: Ash (light grey)Length: approx. 81-145 cm (adjustable)Belt width: approx. 1.9 cmLoad capacity: 90 kg (anchor loops)   Scope of delivery1 strap, 4 anchor loops, 1 anchor mount camera plate

Für belt or strap - ultra-stable camera clip Super practical and comfortable. With the Capture Clip V3 Clip camera clip, the camera can be carried on a rucksack strap, shoulder strap, trouser belt or waistband. This has the advantage that both hands are free and the camera does not dangle even when moving around a lot, but remains firmly in position. The Capture Pro Clip is the perfect companion for everyday life and especially for outdoor tours such as climbing or cycling. It is suitable for SLR cameras, compact cameras and mirrorless system cameras. Easy grip for spontaneous snapshots The Capture Clip V3 Clip is easy to handle. Once the clip has been positioned on the belt or strap, all you have to do is snap the camera plate attached under the camera into the multi-secured holder and you're done. For spontaneous snapshots, the camera can simply be removed from the Capture Clip V3 clip and then reattached to the clip. Incl. PROplate camera plate – combines the advantages of all previous camera plates The advantages of the ARCAplate, DUALplate and MICROplate camera plate attachments are all combined in the PROplate. Thanks to the all-round Arca profile in the basic configuration, this camera plate can always be inserted into the clip offset by 90 degrees in all four directions. This means that the camera lens can always be inserted facing downwards. The great thing about this is that the Capture-Clip camera plate does not need to be replaced with a corresponding interchangeable plate. Thanks to its compatibility with the quick-release coupling, the camera can be attached directly to a tripod from the Capture Clip. However, thanks to its width of 5.2 cm, the PROplate has a stable and suitable support surface for large SLR cameras.  PROplate camera plate with eyelets for the anchor loops of the leash, cuff, slide and clutch The anchor loops from the Peak Design System can be attached to four eyelets in the corners of the PROplate. This enables quick and flexible movement between the Capture Clip V3 Clip, slides such as the Clutch and Cuff hand loops and the Slide and Leash straps. For use as a tripod head with quick-release coupling - tripod thread on the back To ensure that the Capture Clip V3 Clip can be attached to almost any camera tripod or panhead, there is a removable ¼-inch adapter on the 3/8-inch internal thread on the back. This also allows it to be used as a quick-release coupling for a ball head. Protects against falling out or theft - multiple protection on the camera plate holder To prevent the camera from being stolen or falling out of the Capture Clip V3 Clip, the camera plate can be secured in multiple ways. The grid lock prevents the camera from slipping out of the holder; the camera can only be removed by pressing and holding the red release button. The release button itself can be locked by turning the upper part 90 degrees, and the camera plate can also be clamped in the holder with a locking screw. Fits belts and straps with a thickness of up to 1.3 cm and a width of up to 7.6 cm The Capture Clip V3 clip can be attached to all belts and straps with a maximum thickness of 1.3 cm and a width of 7.6 cm. The Capture Clip V3 Clip is easy to attach: the unscrewed clip is unfolded, then attached to the belt or strap and finally screwed back on using the two clamping screws. Technical details Material: aluminum, etc.Dimensions: approx. 2.0 x 8.3 x 4.0 cmWeight: approx. 70 g (without camera plate)Carrying capacity: approx. 90 kg (200 lbs.)Camera screw: 1/4 inch Scope of delivery 1 camera clip V3 in black1 clamping plate (Arca-Swiss compatible)1 hexagon socket wrench Note The Capture Clip v3 from 2017 can accommodate all Peak Design camera plates released up to that point. However, the new flatter standard plate plates cannot be used for older Capture Clip models. Although these plates can be inserted, the distance between the top of the plate and the top of the clip would be too small to insert the plate into the clip with a camera mounted on it.

Peak Design Camera Strap Slide Coyote – The versatile professional strap for your camera The Peak Design Slide camera strap in Coyote is the perfect solution for photographers who value comfort, flexibility, and style. Whether around your neck, over your shoulder, or as a sling, this strap adapts perfectly to your working style and gives you maximum control over your camera. The Slide Coyote from Peak Design is more than just a camera strap – it is a well-designed premium accessory for professionals and ambitious amateur photographers. With its wide, padded nylon strap, it is comfortable to wear, even during longer shoots with heavy equipment. Thanks to the proven Anchor Link system, you can attach or remove the strap in seconds – without any tools. The high-quality workmanship, combined with the elegant, sand-colored design (Coyote), makes the Slide not only functional but also visually appealing. Special features and advantages Versatile carrying options: Use the harness as a shoulder strap, neck strap, or sling – depending on the situation and your preference. Ultra-fast length adjustment: With the aluminum quick-release buckles, you can adjust the harness to the ideal length in a flash. Robust materials: The Slide is made of tear-resistant, abrasion-resistant nylon fabric with Hypalon reinforcements for maximum durability. Secure attachment system: The patented Anchor Links hold up to 90 kg and offer maximum safety for your camera. Compatibility Compatible with almost all popular DSLR and mirrorless cameras Works with Peak Design Capture Clip (sold separately) Also ideal for binoculars or other devices with suitable eyelets Technical details Material: Woven nylon, aluminum, Hypalon Length adjustment: 99–145 cm Strap width: 4.5 cm Weight: approx. 148 g Load capacity: up to 90 kg Color: Coyote (sand-colored) Scope of delivery 1x Slide camera strap Coyote 4x Anchor connections 1x Anchor Mount (tripod thread adapter) 1x Hex key 1x Microfiber bag

Your new companion: the Peak Design Slide Lite camera strap in Ocean You reach for your camera, and it fits perfectly in your hand. Why? Because you're using the Peak Design Camera Strap Slide Lite in Ocean – your faithful companion that combines comfort, style, and functionality in perfect harmony. This accessory will not only revolutionize your workflow, but also take your photography experience to a whole new level. Flexible use for every moment Whether you wear the strap around your neck, across your chest, or classically over your shoulder, the Slide Lite effortlessly adapts to your style and needs. Thanks to its continuously adjustable length, you can switch between different carrying styles in seconds, allowing you to remain flexible in any situation. Comfort meets safety The Slide Lite combines padded comfort with absolute safety. The inside of the strap is coated with a non-slip silicone layer that ensures the strap stays exactly where it should – even when you move. You'll be surprised at how light and comfortable it feels against your skin, even during longer periods of use. Robust elegance in Ocean design With its elegant Ocean color and high-quality materials, the Slide Lite not only attracts attention, but also withstands the toughest conditions. The double-layer nylon fabric structure is incredibly durable and lightweight at the same time. Add to that the innovative Peak Design Anchor connections, which are not only easy to use but also keep your camera secure. Technical features at a glance Material: High-strength nylon fabric with silicone coating Length adjustable: 39 in. – 57 in. (99 cm – 145 cm) Width: 3.2 cm – ideal for compact and mirrorless cameras Load capacity: Up to 90 kg – more security for your valuable equipment Weight: Only 141 g – lightweight yet extremely robust Scope of delivery 1 x Peak Design Slide Lite camera strap in Ocean4 x Anchor connectors for maximum flexibility1 x hex wrench with 4 mm 1 x Anchor mount plate for attaching to the tripod mount1 x microfiber storage bag – ideal for on the go Grab the Peak Design Slide Lite in Ocean and make it part of your photographic adventures. Once you try it, you'll never want to be without it again – promise!