Timer for long time exposure

Wire MultiFunction Timer Remote TM-F2 for Sony The advantage of manual release is that you can no longer shake or accidentally move the image section.The cable release can also be used manually. The shutter release can be locked for manual long time exposure, the built-in stopwatch then counts down until the exposure is finished. Video recording can also be started and stopped. More features: The signal tones can be switched off, the display is illuminated and a key lock can be set.Mirror lock up is not possible with this cable release. Delayed triggeringLong time exposures (the exposure time on the camera may have to be set to "BULB")Interval and continuous shooting Relevant notes: The camera focuses automatically before the shutter release if the release is programmed.The exposure time counts towards the interval. If you want an exposure time of 8 seconds, for example, the interval must be 10 seconds. So that the timer does not "hang around" in the air, there is this practical attachment: Timer Tripod Mounting RCH-TM suitable for Sony cameras which have a multi-terminal connection for the Sony RM-VPR1 remote release: (list is not exhaustive)     • Sony Alpha A1  • Sony Alpha A9 III  • Sony Alpha A9 II  • Sony Alpha A9  • Sony Alpha A7S III  • Sony Alpha A7S II  • Sony Alpha A7S  • Sony Alpha A7R V • Sony Alpha A7RM IV A • Sony Alpha A7R IV • Sony Alpha A7 RM III A • Sony Alpha A7 R III • Sony Alpha A7 II • Sony Alpha A7R • Sony Alpha A7 IV • Sony Alpha A7 III • Sony Alpha A7 II • Sony Alpha A7 • Sony Alpha 6600 • Sony Alpha 6500 • Sony Alpha 6400 • Sony Alpha 6300 • Sony Alpha 6100 • Sony Alpha 6000 • Sony Alpha 5100 • Sony Alpha 5000         • Sony SLT A99 II • Sony SLT A77 II • Sony SLT A68 • Sony SLT A99     • Sony ZV-1 • Sony RX1R II • Sony RX10 IV • Sony RX10 III • Sony RX10 II • Sony RX10 • Sony RX100 VII  • Sony RX100 VI • Sony RX100 VA • Sony RX100 V • Sony RX100 IV • Sony RX100 III • Sony RX100 II • Sony RX10M2 • Sony RX0  • Sony RX0 II         The manual of your camera will tell you around page 11 whether your camera has such a socket. Usually referred to as Multi/Micro USB socket in the camera manual. You may need to set the USB function of the camera to "Auto".   Technical details: Delayed shutter release (Delay): 0s - 99h 59min 59sLong time exposure (Bulb): 0s to 99h 59min 59s*Interval: 1s - 99h 59min 59sContinuous shooting: 1-399 or infinitedimensions: 11 x 4,5 x 2,2cmweight: 72gPower supply: 2 micro cells (AAA)Cable length: approx. 90cm Operating temperature: -20 to +50°C   Scope of delivery: 1x Timer cable release2x AAA batteries1x manual in English and German

Remote Control Holder RCH-TM from JJC   The JJC RCH-TM Remote Control Holder is designed specifically for the JJC TM Series, WT-868 and MT-636 remote controls. It can hold one remote control and keep your remote control ready for convenient operation. Made of high quality material, this holder is robust and durable. The Velcro closure on the back of the holder allows you to attach this holder to a tripod.   Product Features: Specially designed for JJC TM Series, WT-868 and MT-636 remote controls.Holds one remote controlKeeps your remote control ready for convenient operation.Made of high quality material, robust and durable.With the Velcro fastener you can attach the holder to a tripod.   Technical data:   Weight: 24g Size: 65mm X 130mm X 55mm Material: Neoprene/Polyester   Scope of delivery:   1 x holder for tripod mounting  

Radio Remote Release Kit Hähnel Captur Timer for Nikon The Hähnel Captur LCD Timer works with radio and allows you to control the camera wirelessly according to your wishes. The receiver is plugged onto the camera's hot shoe and connected to the remote release socket with the camera cable. The transmitter can also be connected to the camera with the cable and used as a cable release. The high range of 100m leaves all limits open, whether wildlife, landscape or event photography, the wireless companion from Hähnel is the ideal solution for all cases. All advantages at a glance: Single and serial shot self-timer / interval timer / long exposure mode Image counter Range up to 100m DCM Digital channel adjustment Operation with 2x AA batteries Frequency selection for individual control of multiple cameras Thanks to the 2.4GHz reception frequency, transmission through walls is possible LCD display with backlight compatibility: Connection same as MC-DC2: • Nikon Z7 • Nikon Z7 II • Nikon Z6 • Nikon Z6 II • Nikon Z6 III • Nikon Z5 • Nikon D90 • Nikon D3100 • Nikon D3200 • Nikon D3300 • Nikon D5000 • Nikon D5100 • Nikon D5200 • Nikon D5300 • Nikon D5500 • Nikon D5600 • Nikon D7000 • Nikon D7100 • Nikon D7200 • Nikon D7500 • Nikon D780 • Nikon Df • Nikon COOLPIX P7700 • Nikon COOLPIX P7800 • Nikon COOLPIX A • Nikon COOLPIX P1000 • Nikon COOLPIX P950 •  •  •  Connection same as MC-36A: • Nikon Z9 • Nikon Z8 • Nikon Z6 • Nikon D850 • Nikon D810 • Nikon D810A • Nikon D6 • Nikon D5 • Nikon D4 • Nikon D4S • Nikon D3 • Nikon D3S • Nikon D3X • Nikon D800 • Nikon D800E • Nikon D700 • Nikon D500 • Nikon D300 • Nikon D200           Scope of delivery: 1x Hähnel Captur Timer Module 1x Hähnel Captur receiver Nikon 1x connection cable N1 1x connection cable N2 4x AA battery

The most advanced and flexible camera Interval shutter release for fast motion The LRTimelapse Pro Timer 3 is one of the most advanced and flexible camera interval triggers for time-lapse and astro-photographers. It has been developed by Gunther Wegner, one of the pioneers of time-lapse photography "Made in Germany" and is especially designed for the needs of professionals and demanding amateur photographers.The LRT Pro Timer is a small and lightweight interval shutter release with built-in Li-ion battery, which can be charged via USB and lasts up to 20 hours. It features a razor-sharp OLED display that is readable in all conditions and a single button for easy and ergonomic operation - even in the dark and with gloves on. It can trigger two cameras at the same time, allows time-controlled and periodic recording, offers special support for mirrorless cameras, a flashlight function for foreground illumination and above all: it enables the shortest possible black times. This means that the camera can be operated while recording!Intervals can be set in steps of 0.1 seconds. Interval ramping allows during recording a continuous adjustment of the interval over an adjustable period of time - also in combination with motion control hardware. Optionally, the camera can be operated in bulb mode (astro-photography) for time-lapse and single exposures. The lighting of the timer can be switched off completely - essential for shots in the dark. Default values for interval, number of exposures etc. can be stored in the LRT Pro Timer settings.The integrated real time clock allows time-controlled exposures and periodic exposures at certain times of the day. The LRT Pro Timer has a small and light-weight housing, which can be attached directly to the camera's hot shoe in two different angles, alternatively with corresponding eyelets, also on a tripod.The release cable for the respective camera is not included. It is a standardized cable that must be purchased separately if required. Suitable cables can be found here in our store. Compared to its predecessor, the LRT Pro Timer 3 offers a larger display (double resolution, almost three times the size), a cover made of optical precision glass to protect the display, a stylish aluminum knob for more precise settings and haptic indicators for the camera port numbers on the housing. The LRT Pro Timer works with any camera for which a standard release cable is available (DSLR / DSLM, Nikon, Canon, Sony, Fuji, Olympus, Leica and many others). Technical specifications: - CE Certification- Fast ATSAMD21 Cortex M0 processor, - 128 x 64 pixel black and white OLED display, shielded by a precision optical glass cover.- Built-in 500 mAh LiPo battery (can be upgraded to 800 mAh by the user), which can be charged via Micro-USB.- Battery powered real time clock (CR1220 button cell).- 2 camera connectors with standardized 2.5 mm jack sockets (3-pin).- 2 flash shoes on the housing at different angles for direct mounting on the camera.- 2 eyelets on the housing for passing a cord or Velcro tape through for mounting on a tripod.- Tested temperature range: -20 ° C - + 40 ° C - Do not leave the timer in a car exposed to direct sunlight. It is best to store the LRT Pro Timer in a backpack in very cold conditions to avoid discharging or damaging the battery by cold.- Intervals from 0.3 seconds to 12 hours- Interval steps: 0.1 seconds or even 0.01 seconds if required.- Number of shots: 1 to unlimited- Bulb time for single exposure up to 24 hours, bulb time for time-lapse shots maximum (interval 1 sec.).- Operating time with fully charged battery approx. 20 hours, approx. 20,000 releases Interval: 4 seconds, display switched on).- Firmware updates via UF2 files, by copying the firmware file to a drive which is provided after connecting the timer to a computer (PC or Mac). The timer must be set to update mode by double clicking the reset button.- Although the optical glass cover of the LRT Pro Timer 3.0 provides good protection, the LRT Pro Timer is not waterproof. Please do not operate the device in rain or expose it directly to water.- Size (incl. rotator): 83 x 43 x 29 mm- Weight (including battery): 67 g- Packaging size: 135 x 89 x 35 mm- Weight incl. packaging: 107g*) For cameras that do not require AF signal. By default the minimum shutter speed is calculated as (shutter release time + AF_time + 50ms) rounded up to the next 100ms. By default this is 0.4 seconds. For cameras that do not require an AF signal to be sent before release, you can set the AF time to 0 in the settings. The minimum interval is then 0.3 seconds. Please note that most cameras are not able to record such short intervals. Attention: Li-Ion battery is installed; camera connection cables are NOT included in the scope of delivery can be found here in the store!   Further information can be found at https://lrtimelapse.com/lrtpt/.

Timer cable release such as Nikon MC-DC2 from JJC A cable release offers you decisive advantages over manual camera release. It eliminates camera shake and prevents unintentional shifting of the image detail. The cable release is an indispensable tool, especially for long exposures and video recording. Manual control and long exposure The cable release can be used both manually and automatically. For long exposures, it offers the option of locking the shutter. While the shot is in progress, the built-in stopwatch counts the exposure time. This gives you full control over the duration of the shot. Video recordings can also be conveniently started and stopped at the push of a button. Additional functions for more flexibility The cable release offers a range of practical features: Delayed release: perfect for time-lapse photography. Long exposures: set the camera to “BULB” mode and precisely control the exposure time. Interval and continuous shooting: ideal for time-lapse or continuous photography. User-friendly operation You can turn off the beeps if necessary and activate the key lock to prevent accidental entries. The backlit display makes it easy to use, even in low light conditions. Tips for use With the programmed release, the camera automatically focuses before taking the shot. Remember that the exposure time counts towards the interval. If you want an exposure time of 8 seconds, the interval should be at least 10 seconds to allow enough time for the shutter to release. So that the timer does not "hang around" in the air, there is this practical attachment: Timer Tripod Mounting RCH-TM Compatible with the following Nikon cameras.   • Nikon Z7 • Nikon Z7 II • Nikon Z6 • Nikon Z6 II • Nikon Z6 III • Nikon Z5 • Nikon D90 • Nikon D3100 • Nikon D3200 • Nikon D3300 • Nikon D5000 • Nikon D5100 • Nikon D5200 • Nikon D5300 • Nikon D5500 • Nikon D5600 • Nikon D7000 • Nikon D7100 • Nikon D7200 • Nikon D7500 • Nikon D780 • Nikon Df • Nikon COOLPIX P7700 • Nikon COOLPIX P7800 • Nikon COOLPIX A • Nikon COOLPIX P1000 • Nikon COOLPIX P950 •  •  •    Technical details: Delayed release (Delay): 0s - 99h 59min 59s Long exposure (Bulb): 0s to 99h 59min 59s* Interval: 1s - 99h 59min 59s Continuous shooting: 1-399 or infinity Dimensions: 11 x 4.5 x 2.2 cm Weight: 72 g Power supply: 2 micro cells (AAA) Cable length: approx. 90 cm Operating temperature: -20 to +50°C Contents: 1x timer cable release 2x AAA batteries 1x manual in English and German

Radio Remote Release Kit Hähnel Captur Timer for SonyThe Hähnel Captur LCD Timer works with radio and allows you to control the camera wirelessly according to your wishes. The receiver is plugged onto the camera's hot shoe and connected to the remote release socket with the camera cable. The transmitter can also be connected to the camera with the cable and used as a cable release. The high range of 100m leaves all limits open, whether wildlife, landscape or event photography, the wireless companion from Hähnel is the ideal solution for all cases.All advantages at a glance:Single and serial shot self-timer / interval timer / long exposure mode Image counter Range up to 100m DCM Digital channel adjustment Operation with 2x AA batteries Frequency selection for individual control of multiple cameras Thanks to the 2.4GHz reception frequency, transmission through walls is possible LCD display with backlightcompatibility:* Enumeration not exhaustive A7 / A7MarkII / A7MarkIII / A7R / A7RMarkII / A7RMarkIII / A7RMarkIV/ A7MarkIV/ A7S / A7SMarkII / A9 / A58/ A68/ A3000 / A3500 / A5000 / A5100 / A6000 / A6100 / A6300 / A6400 / A6500 / A6600 / HX50 / HX60 / HX80 / HX300 / HX400 / NEX-3N / RX10 /RX10MarkII / RX10Mark III / RX10MarkIV/ RX100 / RX100MarkII / RX100MarkIII / RX100MarkIV/ RX100MarkV/ RX100Mark VI / RX100MarkVII / WX500Scope of delivery:1x Hähnel Captur Timer Module 1x Hähnel Captur receiver Sony 1x connection cable S2 4x AA battery

Radio Remote Release Kit Hähnel Captur Timer for Canon The Hähnel Captur LCD Timer works with radio and allows you to control the camera wirelessly according to your wishes. The receiver is plugged onto the camera's hot shoe and connected to the remote release socket with the camera cable. The transmitter can also be connected to the camera with the cable and used as a cable release. The high range of 100m leaves all limits open, whether wildlife, landscape or event photography, the wireless companion from Hähnel is the ideal solution for all cases. All advantages at a glance: Single and serial shot self-timer / interval timer / long exposure mode Image counter Range up to 100m DCM Digital channel adjustment Operation with 2x AA batteries Frequency selection for individual control of multiple cameras Thanks to the 2.4GHz reception frequency, transmission through walls is possible LCD display with backlight Compatibility: Connection same as RS-80N3 • Canon EOS-1D X Mark II • Canon EOS 5DS • Canon EOS 5DS R • Canon EOS 5D Mark IV • Canon EOS 6D Mark II • Canon EOS 7D II • Canon EOS 200D** • Canon EOS 2000D** • Canon EOS 1300D** • Canon EOS M5** • Canon EOS M6** • Canon EOS-1D X • Canon EOS-1D C • Canon EOS-1Ds Mark III • Canon EOS-1Ds Mark II • Canon EOS-1Ds • Canon EOS-1D Mark IV • Canon EOS-1D Mark III • Canon EOS-1D Mark II • Canon EOS-1D • Canon EOS 5D Mark III • Canon EOS 5D Mark II • Canon EOS 5D • Canon EOS 20D • Canon EOS 60Da* • Canon EOS 7D • Canon EOS 50D • Canon EOS 40D • Canon EOS 30D • Canon EOS 10D • Canon EOS D60 • Canon D30 • Canon EOS-1D X Mark III • Canon EOS R5 • Canon EOS R3 • Canon EOS R7** • Canon EOS R10 • Canon EOS R6 Mark II • Canon EOS R1 • Canon EOS R5 Mark II     Connection same as RS-60E3   • Canon EOS RP • Canon EOS M5 • Canon EOS M6 Mark II • Canon EOS RA • Canon EOS 90D • Canon EOS 250D • Canon EOS 2000D • Canon EOS 1300D • Canon EOS R6 • Canon EOS 850D • Canon EOS R • Canon EOS 80D • Canon EOS 77D • Canon EOS 70D • Canon EOS 60Da • Canon EOS 60D • Canon EOS 800D • Canon EOS 760D • Canon EOS 750D • Canon EOS 700D • Canon EOS 650D • Canon EOS 600D • Canon EOS 550D • Canon EOS 500D • Canon EOS450D • Canon EOS 400D • Canon EOS 350D • Canon EOS 300D • Canon EOS 200D • Canon EOS 100D • Canon EOS 1200D • Canon EOS M6 • Canon EOS R6 Mark II • Canon EOS R8 • Canon EOS R100     Scope of delivery: 1x Hähnel Captur Timer Module 1x Hähnel Captur receiver Canon 1x connection cable C1 1x connection cable C2 4x AA battery

Timer Remote Control like Canon RS-60N3 from JJC The advantage of manual release is that you can no longer shake or accidentally move the image section. The cable release can also be used manually. The shutter release can be locked for manual long time exposure, the built-in stopwatch then counts down until the exposure is finished. Video recording can also be started and stopped. More features: The signal tones can be switched off, the display is illuminated and a key lock can be set. Mirror lock up is not possible with this cable release. Delayed triggering Long time exposures (the exposure time on the camera may have to be set to "BULB") Interval and continuous shooting Relevant notes: The camera focuses automatically before the shutter release if the release is programmed. The exposure time counts towards the interval. If you want an exposure time of 8 seconds, for example, the interval must be 10 seconds. So that the timer does not "hang around" in the air, there is this practical attachment: Timer Tripod Mounting RCH-TM Compatible with:   • Canon EOS RP • Canon EOS M5 • Canon EOS M6 Mark II • Canon EOS RA • Canon EOS 90D • Canon EOS 250D • Canon EOS 2000D • Canon EOS 1300D • Canon EOS R6 • Canon EOS 850D • Canon EOS R • Canon EOS 80D • Canon EOS 77D • Canon EOS 70D • Canon EOS 60Da • Canon EOS 60D • Canon EOS 800D • Canon EOS 760D • Canon EOS 750D • Canon EOS 700D • Canon EOS 650D • Canon EOS 600D • Canon EOS 550D • Canon EOS 500D • Canon EOS450D • Canon EOS 400D • Canon EOS 350D • Canon EOS 300D • Canon EOS 200D • Canon EOS 100D • Canon EOS 1200D • Canon EOS M6 • Canon EOS R6 Mark II • Canon EOS R8 • Canon EOS R100     Technical details: Delayed shutter release (Delay): 0s - 99h 59min 59s Long time exposure (Bulb): 0s to 99h 59min 59s* Interval: 1s - 99h 59min 59s Continuous shooting: 1-399 or infinite dimensions: 11 x 4,5 x 2,2cm weight: 72g Power supply: 2 micro cells (AAA) Cable length: approx. 90cm Operating temperature: -20 to +50°C   Scope of delivery: 1x Timer cable release 2x AAA batteries 1x manual in English and German

The advantage of manual release is that you can no longer shake or accidentally move the image section. The cable release can also be used manually. The shutter release can be locked for manual long time exposure, the built-in stopwatch then counts down until the exposure is finished. Video recording can also be started and stopped. More features: The signal tones can be switched off, the display is illuminated and a key lock can be set. Mirror lock up is not possible with this cable release. Delayed triggering Long time exposures (the exposure time on the camera may have to be set to "BULB") Interval and continuous shooting Relevant notes: The camera focuses automatically before the shutter release if the release is programmed. The exposure time counts towards the interval. If you want an exposure time of 8 seconds, for example, the interval must be 10 seconds. So that the timer does not "hang around" in the air, there is this practical attachment: Timer Tripod Mounting RCH-TM Compatible with:   • Nikon Z9 • Nikon Z8 • Nikon Z6 • Nikon D850 • Nikon D810 • Nikon D810A • Nikon D6 • Nikon D5 • Nikon D4 • Nikon D4S • Nikon D3 • Nikon D3S • Nikon D3X • Nikon D800 • Nikon D800E • Nikon D700 • Nikon D500 • Nikon D300 • Nikon D200           You may need to set the USB function of the camera to "Auto".   Technical details: Delayed shutter release (Delay): 0s - 99h 59min 59s Long time exposure (Bulb): 0s to 99h 59min 59s* Interval: 1s - 99h 59min 59s Continuous shooting: 1-399 or infinite dimensions: 11 x 4,5 x 2,2cm weight: 72g Power supply: 2 micro cells (AAA) Cable length: approx. 90cm Operating temperature: -20 to +50°C   Scope of delivery: 1x Timer cable release 2x AAA batteries 1x manual in English and German

Timer trigger TM-A like Canon TC-80N3 or RS-80N3 from JJC The Timer Remote Trigger, compatible with your Canon RS-80N3, is the perfect tool for photographers who want to have more control over their shots. With this advanced remote shutter release, you can not only trigger your camera remotely, but also set precise time intervals to easily master challenging projects such as long exposures, time-lapse photography or self-portraits. The remote timer gives you the ability to precisely control the exposure time and set different intervals for continuous shooting. You can easily set start times, exposure duration and interval times to program complex shooting sequences. This is particularly useful when taking landscape or night shots where every second counts to achieve the desired results. Thanks to its ergonomic design, the timer remote control fits comfortably in your hand, and the intuitive user interface makes it easy for you to make the desired settings. The robust construction and high-quality materials ensure that you can rely on your remote shutter release even in demanding conditions. With a cable length of 80 cm, the Timer remote trigger offers you enough flexibility to work from different positions without touching your camera. This minimizes camera shake and gives you razor-sharp images, even with long exposure times. This timer remote trigger has been specially designed for your Canon camera with the RS-80N3 connection and guarantees smooth compatibility. Whether you're a seasoned professional or a passionate amateur photographer, this remote shutter release gives you the control and precision you need to take your photography skills to the next level. The timer remote shutter release is a powerful tool that allows you to turn your creative ideas into great pictures. To prevent the timer from “hanging around” freely in the air, there is this practical attachment:  Timer tripod mount RCH-TM   Compatible with the following cameras: (list is not exhaustive) • Canon EOS-1D X Mark II • Canon EOS 5DS • Canon EOS 5DS R • Canon EOS 5D Mark IV • Canon EOS 6D Mark II • Canon EOS 7D II • Canon EOS 200D** • Canon EOS 2000D** • Canon EOS 1300D** • Canon EOS M5** • Canon EOS M6** • Canon EOS-1D X • Canon EOS-1D C • Canon EOS-1Ds Mark III • Canon EOS-1Ds Mark II • Canon EOS-1Ds • Canon EOS-1D Mark IV • Canon EOS-1D Mark III • Canon EOS-1D Mark II • Canon EOS-1D • Canon EOS 5D Mark III • Canon EOS 5D Mark II • Canon EOS 5D • Canon EOS 20D • Canon EOS 60Da* • Canon EOS 7D • Canon EOS 50D • Canon EOS 40D • Canon EOS 30D • Canon EOS 10D • Canon EOS D60 • Canon D30 • Canon EOS-1D X Mark III • Canon EOS R5 • Canon EOS R3 • Canon EOS R7** • Canon EOS R10 • Canon EOS R6 Mark II • Canon EOS R1 • Canon EOS R5 Mark II     **Compatible via optional RA-E3 cable Continuous shooting: 1-399 or infinite Dimensions: 11 x 4.5 x 2.2cm Weight: 72g Power supply: 2 micro cells (AAA) Cable length: approx. 90cm Operating temperature: -20 to +50°C Scope of delivery: 1x timer cable extension 2x AAA batteries 1x instructions in English and German

Radio Remote Release Kit Hähnel Captur Timer for FujifilmThe Hähnel Captur LCD Timer works with radio and allows you to control the camera wirelessly according to your wishes. The receiver is plugged onto the camera's hot shoe and connected to the remote release socket with the camera cable. The transmitter can also be connected to the camera with the cable and used as a cable release. The high range of 100m leaves all limits open, whether wildlife, landscape or event photography, the wireless companion from Hähnel is the ideal solution for all cases.All advantages at a glance: Single and serial shot self-timer / interval timer / long exposure mode Image counter Range up to 100m DCM Digital channel adjustment Operation with 2x AA batteries Frequency selection for individual control of multiple cameras Thanks to the 2.4GHz reception frequency, transmission through walls is possible LCD display with backlightcompatibility:FinepixS1 / GFX50R / GFX50S / GFX100 / X30 / X70 / X100F / X100T / X-A1 / X-A2 / X-A3 / X-A5 / X-A7 / X-A10 / X-E1 / X-E2 / X-E2S / X- E3 / XF10 / X-H1 / X-M1 / X-Pro2 / X-Q1 / X-Q2 / X-T1 / X-T2 / X-T3 / X-T4 / X-T10 / X-T20 / X-T30 / X-T100 * Enumeration not exhaustive Scope of delivery:1x Hähnel Captur Timer Module 1x Hähnel Captur receiver Fuji 1x connection cable F1 1x connection cable F2 4x AA battery

Timer Remote Controller TM-R2 like Fujifilm RR-100 from JJC The advantage of manual release is that you can no longer shake or accidentally move the image section. The cable release can also be used manually. The shutter release can be locked for manual long time exposure, the built-in stopwatch then counts down until the exposure is finished. Video recording can also be started and stopped. More features: The signal tones can be switched off, the display is illuminated and a key lock can be set Mirror lock up is not possible with this cable release Delayed triggering Long time exposures (the exposure time on the camera may have to be set to "BULB") Interval and continuous shooting Relevant notes: The camera focuses automatically before the shutter release if the release is programmed. The exposure time counts towards the interval. If you want an exposure time of 8 seconds, for example, the interval must be 10 seconds. So that the timer does not "hang around" in the air, there is this practical attachment: Timer Tripod Mounting RCH-TM Compatible with:    • Fujifilm GFX 100 • Fujifilm GFX100S • Fujifilm GFX50S • Fujifilm GFX 50R • Fujifilm GFX100S II* • Fujifilm X-H1 • Fujifilm X-H2 • Fujifilm X-H2S • Fujifilm X-Pro2 • Fujifilm X-Pro3 • Fujifilm X-T5 • Fujifilm X-T4 • Fujifilm X-T3 • Fujifilm X-T2 • Fujifilm X-T1 • Fujifilm X-T50* • Fujifilm X-T30 • Fujifilm X-T20 • Fujifilm X-T10 • Fujifilm X-T200 • Fujifilm X-T100 • Fujifilm X-E3 • Fujifilm X-E2S • Fujifilm  X-E2 • Fujifilm X-E1 • Fujifilm X-A7 • Fujifilm X-A5 • Fujifilm X-A10 • Fujifilm X70 • Fujifilm X30 • Fujifilm X100F • Fujifilm X100T • Fujifilm XF10 •       * this connection cable is needed here to connect the 3.5 mm plug on the camera side Technical details:    Delayed shutter release (Delay): 0s - 99h 59min 59s Long time exposure (Bulb): 0s to 99h 59min 59s* Interval: 1s - 99h 59min 59s Continuous shooting: 1-399 or infinite dimensions: 11 x 4,5 x 2,2cm weight: 72g Power supply: 2 micro cells (AAA) Cable length: approx. 90cm Operating temperature: -20 to +50°C   Scope of delivery: 1x Timer cable release 2x AAA batteries 1x manual in English and German

Radio Remote Release Kit Hähnel Captur Timer for Panasonic and OlympusThe Hähnel Captur LCD Timer works with radio and allows you to control the camera wirelessly according to your wishes. The receiver is plugged onto the camera's hot shoe and connected to the remote release socket with the camera cable. The transmitter can also be connected to the camera with the cable and used as a cable release. The high range of 100m leaves all limits open, whether wildlife, landscape or event photography, the wireless companion from Hähnel is the ideal solution for all cases.All advantages at a glance:Single and serial shotself-timer / interval timer / long exposure modeImage counterRange up to 100mDCM Digital channel adjustmentOperation with 2x AA batteriesFrequency selection for individual control of multiple camerasThanks to the 2.4GHz reception frequency, transmission through walls is possibleLCD display with backlightcompatibility:Olympus: E-30 / E-400 / E-410 / E-420 / E-450 / E-510 /E-520 / E-550 / E-600 / E-620 / E-M1 / E-M1MarkII / E-M1X / E-M5 / E-M5MarkII / E-M10 / E-M10MarkII / E-P1/ E-P2 / E-P3 / E- P5 / E-PL2 / E-PL3 / E-PL5 / E-PL6 / E-PL7 / E-PL8 / E-PM1 / E-PM2 / PEN-F / SP-100 / SP-510 / SP-550 / SP-560 / SP-565 / SP570 / SP590 / Stylus1 / Stylus1S / XZ-1 / XZ-2 *Panasonic: DC- S5 / FZ20 / FZ30 / FZ50 / FZ100 / FZ150 / FZ200 / FZ300 / FZ330 / FZ1000 / FZ1000MarkII / FZ2000 / FZ2500 / G1 / G2 / G3 / G5 / G6 / G7 / G9 / G10 / G70 / G80 / G81 / G85 / G90 / G91 / G95 / GF1 / GH1 / GH2 / GH3/ GH4 / GH5 / GH5S / GX1 GX7 / GX8 / L1/ L10 / LC1 / S1 / S1H / S1M / S1R / S1RM ** Listing not exhaustiveScope of delivery:1x Hähnel Captur Timer Module1x Hähnel Captur receiver P/O1x connection cable O11x connection cable P24x AA battery

The advantage of manual release is that you can no longer shake or accidentally move the image section. The cable release can also be used manually. The shutter release can be locked for manual long time exposure, the built-in stopwatch then counts down until the exposure is finished. Video recording can also be started and stopped. More features: The signal tones can be switched off, the display is illuminated and a key lock can be set. Mirror lock up is not possible with this cable release. Delayed triggering Long time exposures (the exposure time on the camera may have to be set to "BULB") Interval and continuous shooting Relevant notes: The camera focuses automatically before the shutter release if the release is programmed. The exposure time counts towards the interval. If you want an exposure time of 8 seconds, for example, the interval must be 10 seconds. So that the timer does not "hang around" in the air, there is this practical attachment: Timer Tripod Mounting RCH-TM Compatible with:   • Olympus OM-D E-M1 Mark II • Olympus OM-D E-M1 Mark III • Olympus OM-D E-M1 X • Olympus OM-D E-M5 Mark III       Technical details: Delayed shutter release (Delay): 0s - 99h 59min 59s Long time exposure (Bulb): 0s to 99h 59min 59s* Interval: 1s - 99h 59min 59s Continuous shooting: 1-399 or infinite dimensions: 11 x 4,5 x 2,2cm weight: 72g Power supply: 2 micro cells (AAA) Cable length: approx. 90cm Operating temperature: -20 to +50°C   Scope of delivery: 1x Timer cable release 2x AAA batteries 1x manual in English and German

Wire Timer Remote TM-R for Fujifilm RR-90 from JJC The advantage of manual release is that you can no longer shake or accidentally move the image section. The cable release can also be used manually. The shutter release can be locked for manual long time exposure, the built-in stopwatch then counts down until the exposure is finished. Video recording can also be started and stopped. More features: The signal tones can be switched off, the display is illuminated and a key lock can be set Mirror lock up is not possible with this cable release Delayed triggering Long time exposures (the exposure time on the camera may have to be set to "BULB") Interval and continuous shooting Relevant notes: The camera focuses automatically before the shutter release if the release is programmed. The exposure time counts towards the interval. If you want an exposure time of 8 seconds, for example, the interval must be 10 seconds. So that the timer does not "hang around" in the air, there is this practical attachment: Timer Tripod Mounting RCH-TM Compatible with:   • Fujifilm GFX 50S  • Fujifilm X30 • Fujifilm X70 • Fujifilm X100F • Fujifilm X100T • Fujifilm X-A1 • Fujifilm X-A2 • Fujifilm X-A3 • Fujifilm X-A10 • Fujifilm X-E2 • Fujifilm X-E2S • Fujifilm X-E3 • Fujifilm X-M1 • Fujifilm XQ1 • Fujifilm X-Pro2 • Fujifilm XQ2 • Fujifilm FinePix S1 • Fujifilm X-T1 • Fujifilm X-T2 • Fujifilm X-T10 • Fujifilm X-T20 • Fujifilm X-A5 • Fujifilm X-H1 • Fujifilm X-T100 • Fujifilm XF10               Technical details:   Delayed shutter release (Delay): 0s - 99h 59min 59s Long time exposure (Bulb): 0s to 99h 59min 59s* Interval: 1s - 99h 59min 59s Continuous shooting: 1-399 or infinite dimensions: 11 x 4,5 x 2,2cm weight: 72g Power supply: 2 micro cells (AAA) Cable length: approx. 90cm Operating temperature: -20 to +50°C   Scope of delivery: 1x Timer cable release 2x AAA batteries 1x manual in English and German

The advantage of manual release is that you can no longer shake or accidentally move the image section. The cable release can also be used manually. The shutter release can be locked for manual long time exposure, the built-in stopwatch then counts down until the exposure is finished. Video recording can also be started and stopped.More features: The signal tones can be switched off, the display is illuminated and a key lock can be set. Mirror lock up is not possible with this cable release.Delayed triggering Long time exposures (the exposure time on the camera may have to be set to "BULB") Interval and continuous shootingRelevant notes: The camera focuses automatically before the shutter release if the release is programmed. The exposure time counts towards the interval. If you want an exposure time of 8 seconds, for example, the interval must be 10 seconds.So that the timer does not "hang around" in the air, there is this practical attachment:Timer Tripod Mounting RCH-TM Compatible with: Olympus E-620, E-600, E-520, E-510, E-450, E-420, E-410, E-400, E-30Olympus Pen E-P5, E-P3, E-P2, E-P1, E-PL9, E-PL8, E-PL7, E-PL6, E-PL5, E-PL3, E-PL2, E-PM2 Olympus E-M10 Mark II, OM-D E-M10, OM-D E-M5 Mark II, OM-D E-M5, OM-D E-M1Olympus Stylus 1S, Stylus 1, Stylus SH-2, Stylus SH-1Olympus SP-820 UZ, SP-810 UZ, SP-720 UZ, SP-620 UZ, SP-610 UZ, SP-590UZ, SP-570 UZ, SP-565 UZ, SH-50, SZ-16NOT FOR Pen E-PL1Technical details: Delayed shutter release (Delay): 0s - 99h 59min 59s Long time exposure (Bulb): 0s to 99h 59min 59s* Interval: 1s - 99h 59min 59s Continuous shooting: 1-399 or infinite dimensions: 11 x 4,5 x 2,2cm weight: 72g Power supply: 2 micro cells (AAA) Cable length: approx. 90cm Operating temperature: -20 to +50°CScope of delivery: 1x Timer cable release 2x AAA batteries 1x manual in English and German

Timer Remote Shutter Cord TM-PK1 like Pentax CS-310   The advantage to manual Auslösen is that you can no longer blur or accidentally shift the image section. The cable outöser can also be used manually. The Auslöser can be locked für manual long exposure, the built-in stopwatch then zählt until the recording is completed. Video recording can also be started and stopped. Other features: The signal lights can be turned off, the display is illuminated and a key lock can be set up. Mirror lockout is not enabled by this cable outlet. Delayed Auslösen Long exposures (Possibly the exposure time must be set to "BULB" on the camera). Interval and continuous shooting Pertinent notes: The camera will focus automatically before releasing if the release is programmed.  Exposure time counts towards the interval. If you want an exposure time of 8 seconds, for example, the interval must be 10 seconds long. So that the timer does not "hang around" freely in the air, there is this convenient attachment: Timer Tripod Mount RCH-TM Compatible with the following cameras: Pentax K-70 Pentax KP Fujifilm X-T200 Fujifilm X-E4 Fujifilm GFX 100 II Nikon Z50 II Nikon Z5 II Nikon ZR Technical details:  Delayed output (Delay): 0s - 99h 59min 59s. Long exposure (Bulb): 0s to 99h 59min 59s*. Interval: 1s - 99h 59min 59s Continuous shooting: 1-399 or infinity Mass: 11 x 4.5 x 2.2cm Weight: 72g Power supply: 2 micro cells (AAA) Cableänge: approx. 90cm Operating temperature: -20 to +50°C Scope of delivery: 1x Timer cable outletöser 2x AAA batteries 1x manual in English and German