Studio flash with Bowens connection

Godox RS50 50 cm extension  For the rigging of spotlights and reflectorsThe extension rod and connecting piece from Godox offer an extension of 50 cm for the rigging of spotlights and reflectors. The extension rod and connecting piece from Godox offer an extension of 50 cm for the rigging of spotlights and reflectors. The feature of the Godox RS50: 50 cm long connecting rodIncludes a rod connector Scope of delivery: 2 x 50 cm extension rod1 x rod connector  

Connection cable jack plug 2.5 mm to 3.5 mm Connect your devices effortlessly! With this high-quality connection cable, you can quickly connect devices with different jack plug sizes. The adapter with 2.5 mm to 3.5 mm jack plug is perfect if you want to connect devices with smaller outputs such as studio flashes, older remote releases or special audio devices to standard audio connections. The cable offers reliable, lossless transmission. The gold-plated contacts and high-quality workmanship guarantee a long service life and maximum conductivity, so you can count on optimal transmission every time. With a flexible length, this cable is not only practical, but also robust and easy to handle – perfect for on the go or for everyday use in the photo studio. The cable is Contents: 1 x connection cable, 2.5 mm jack plug to 3.5 mm jack plug

Spare part gripper square for light tent LSD and LST from GodoxThis angular gripper is a replacement part for a lost holder.Suitable for all Godox LSD and LST light tents for product photography.Included in delivery:1 x gripper angular

Jinbei offers protection caps for all studio heads with a Jinbei or Bowens S-Type bayonet, which effectively cover flash tubes as well as long E27 modeling lights and protect them from shocks and damage.The thick-walled protective cap is made of durable plastic. With the protective cap, the flashes can be easily transported in the carrying bag to the next shooting.Through the opening in the cap, air circulation also takes place. The flash tubes do not have to be completely cooled down before the cap is mounted. There is a short and a long version of this protective cap!FeaturesProtects flash tube and modeling lamp from damage and dirtSuitable for all flash heads with Bowens S-Type, Jinbei or Walimex bayonetFlash cools down even further after maskingAlso suitable for large modeling lightsTechnical detailsCompatibility: Jinbei, Bowens S-Type, Walimex (except CY series)Material: plasticheight: ca.90 mmScope of delivery1 x Jinbei protection cap for flash heads (Bowens S-Type bayonet)

Flash sync cable from X-Sync to 3.5mm connector.Technical data:Connection: X-Sync to 3.5mm jacklength: approx. 13cmScope of delivery:1x X-Sync to 3.5 mm connector flash sync cable

Flash head extension 10m. Compatible with Godox H2400P flash head.Scope of delivery:1 x extension cable 10 meters

Godox AB10RS ball joint arm for the Godox KNOWLED LiteFlow system The Godox AB10RS ball joint arm for the Godox KNOWLED LiteFlow System is a highly flexible accessory that expands your photography and lighting options. This flex arm offers a wide range of customization options to position your equipment exactly according to your needs. One end of the arm has a 5/8" male threaded stud with a 3/8" 16 thread, while the other end has a 5/8" female threaded connection. These versatile thread options allow for easy and secure attachment of various accessories or devices. The fully adjustable nature of the Godox AB10RS allows you to find the optimum position for your equipment. Whether you need to place smaller accessories with precision or need a quick adjustment, this flex arm gives you the flexibility you need. The features of the Godox AB10RS are: Fully adjustable15 cm long5/8" spigot and 5/8" receiver Included in the scope of delivery: 1 x Godox AB10RS flex arm (15 cm, length over all)

Efficient video production with the Godox handle and battery holder for ML60IIBi The importance of a smooth video production cannot be emphasized enough. To optimize this process, we have specially designed the Godox handle and battery holder for the Godox ML60IIBi  developed. It was created to hold two NP-F batteries and offers you the flexibility to work anywhere, regardless of the availability of a mains supply. Portable and handy design for maximum mobility The outstanding feature of this accessory is its portable and handy design. You can move around freely and work in different places. The compact nature of the Godox Handle and Battery Holder for ML60IIBi makes it your indispensable companion on the go. Compatibility with two NP-F batteries The compatibility with two NP-F batteries  is a key feature of this accessory. You have the freedom to choose between different batteries to meet your power requirements. Note, however, that the NP-F batteries are not included and must be purchased separately. Special features for optimum performance Apart from its portable design and compatibility with two NP-F batteries, the Godox handle and battery holder for ML60IIBi offers other special features. You can operate the accessory with two NP-F batteries (not included), and a generous 2-year warranty gives you peace of mind and confidence in the quality of the product. Included in the scope of delivery   1 x Godox AK-B01 Handle and battery holder for ML60IIBi

Designed for use with the P2400 Power Pack, the Godox H2400P flash head features 2400W of power, the popular Bowens front connector for accessories, and a bright 60W LED modeling light. An integrated handle makes it easy to adjust the light angle and transport.For technicians:Max. power 2400 W/sBayonet BowensLED modeling light with 60WattCable length approx. 3.6 metersScope of delivery:1 x flash head H2400P suitable for Powerpack P2400Note: This is "only" the light, there is no generator included, you have to buy this separately. The Godox P2400 generator can be found here.

Godox MS200V studio flash with 200 watt seconds With the MS200V studio flash from Godox you get a studio flash which is equipped with the latest technology. The studio flash offers a fast charging time to flash readiness. The 10W LED modeling light is flexibly adjustable and gives you a good feeling before photography. Settings are made via push buttons on the back of the unit and displayed on the easy-to-read LCD. The MS200V has built-in 2.4 GHz wireless X technology with 32 channels. With an optional X1, X2 or XPro transmitter, you can conveniently control the flash output and modeling light remotely. The flash head also features S1/S2 slave triggering, which facilitates the use of cameras with pre-flash. In addition, the MS300V has a Bowens accessory port on the front that allows the use of Godox modifiers as well as accessories from many other manufacturers that use this system. Advantages at a glance: Built-in receiver for Godox's 2.4 GHz X systemBowens light formaer connection for a wide selectionOptical receiver for triggering by another flash already built inSimple operationEasy-to-read LCD display shows settings and functions For technicians: Guide number of 53 (200Ws)Flash charging time: 0.1-0.9sControl range: 1/1 to 1/32Modeling light: 10W LED / 5800K +/- 200 Kelvinmodeling light control range: 5% - 100%Bowens S-type bayonet adapterDimensions: 283x167x126 mmWeight: 1,3 kg Scope of delivery: 1x Godox MS200V1x flash tube1x protection cap1x cold current cable   You can find all the technical details in the Godox MS200V instruction manual in English   Tu trouveras tous les détails techniques dans le mode d'emploi Godox MS200V en français  

  Connection cable with PC connection on both sides for connecting various radio trigger transceivers or similar.The cable is 35cm long. Scope of delivery:1 x X-Sync connection cable plug to plug

Replacement Rods for Godox P120L Softbox   This is a replacement rod for the Godox P120L softbox in case it is broken or lost.   Scope of delivery:   1 x Replacement Rod for Godox P120L Softbox

Yongnuo YN508 Ringlight RGB 3200-5500KThis ring light creates a shadow-free illumination and is therefore especially suitable for product shots or macro shots. Due to its shape, it creates a round highlight, which makes it also very suitable for portrait shots. This ring light also has a holder for a smartphone and is perfect for Youtoube videos of yourself.The lamp is infinitely dimmable, which allows an adjustment to every light situation. So you are even more flexible and the light can be used as main and fill light.It can be used on any standard lamp tripod and allows you to illuminate the motif without shadows. This ring light can also be separated and used as a single light, you need either two batteries or two power supplies.Note : Suitable lamp tripods can be found here . For the technicians:Light source 480 LED Power 30WattInner diameter approx. 34cmOuter diameter approx. 43cmColor temperature 3200 - 5500K Luminous intensity 3720 lumen (dimmable)Power supply battery or power supply unit (two batteries are required)Connection thread underside: 1/4".weight approx. 1,67kgSuitable battery for YN608 from Patona NP-F970 (you need 2 pieces)Suitable power supply unit for YN608 YN-600 AC (you need 2 pieces)Suitable charger for YN-600 AC from Yongnuo YN-750CFotichaestli light testWe have tested the lamp for you and have come to the following values. The lamp was measured with 100cm distance without diffuser disk on full power with 5600 Kelvin.Kelvin: 4912 Lux: 687 TLCI: 95 RA/CRI: 95.3Included in delivery:1 x Ringlight Yongnuo YN508 (without battery or power supply)1 x tripod holder

Anschlusskabel mit 2,5mm-Klinkenstecker zum Anschliessen diverser Funkauslöser-Transceivers an ein (Studio-)Blitzgerät mit 2,5mm-Klinkenbuchse. Kabellänge 35cm Lieferumfang:1 x X-Sync Blitz Anschlusskabel

Jinbei offers protection caps for all studio heads with a Jinbei or Bowens S-Type bayonet, which effectively cover flash tubes as well as short E27 modeling lights and protect them from shocks and damage.The thick-walled protective cap is made of durable plastic. With the protective cap, the flashes can be easily transported in the carrying bag to the next shooting.Through the opening in the cap, air circulation also takes place. The flash tubes do not have to be completely cooled down before the cap is mounted. There is a short and a short version of this protective cap!FeaturesProtects flash tube and modeling lamp from damage and dirtSuitable for all flash heads with Bowens S-Type, Jinbei or Walimex bayonetFlash cools down even further after maskingTechnical detailsCompatibility: Jinbei, Bowens S-Type, Walimex (except CY series)Material: plasticHeight: ca.45 mmScope of delivery1 x Jinbei protection cap for flash heads (Bowens S-Type bayonet)

Soft video light for individual illuminationThe Patona Premium video light is extremely gentle and is therefore suitable for many different lighting projects. Whether photos or videos - with the Patona Premium LED video light, various projects can be illuminated as desired. The ring light video device with a solid aluminium alloy housing is extremely functional and also provides a good view of thematerial properties contribute to improved heat dissipation. The attractive design and the low weight of the product enhance the value of this ring light video innovationin addition.The video light is individually adjustableTo make the illumination light as soft as possible, 180 3200K and 180 5600K high brightness 2835 LED lights are implemented. At the same time a scientifically basedBacklighting methods are used to enhance the desired effect. The user has the possibility to adjust the degree of brightness from 0 percent to 100 percent.to adjust. The colour temperature can also be adjusted as required - from 3200K to 5600K. This means that even unusual ambient conditions can be designed to suit individual requirements. For even more flexibility and convenience in use, the bracket included in the scope of delivery is perfect. It allows the device to be rotated by up to 360°.will be. The functional control circuit as well as the constant current and output voltage contribute to the fact that each light segment behaves more strongly overall. As a result, each of the existing lamp globes impresses with its significantly higher overall performance. The LCD display shows the degree of current brightness, the colour temperature and last but not least the battery charge level.Technical details of the video lightThe maximum power is 70 watts. The illuminance is specified by the manufacturer as 1500 LUX / 1m. The illumination angle is >120° and the dimming range is 0 to 100 percent. Power is supplied by a V-Mount battery via an external DC15V 5A adapter. The dimensions of the product are 539 mm x 38 mm x 548 mm. The remote control, which is also included, has an LCD display with blue backlight. Its range is about 50 meters. 40 different channels are available. The package includes the Patona Premium ring lightVideo SL-360ARC include a power supply, a remote control, a manual and a professional carrying case.ConclusionThis ring light video product is an extremely high quality device that can be used in different areas. The handling is simple and theThe quality of the material is impressive due to its high value. If you are looking for a product for your image and video projects that not only shines with first-class quality, but alsoflexible in use, you are certainly well advised to use the ring light video device. Scope of delivery:1 x Ringlight SL-360ARC1 x power supply 110-220V1 x remote control (without AAA batteries)1 x instruction1 x professional carrying bag

Fan for Godox VL150Spare part for the LED light Godox VL 150Scope of delivery:1 x fan to VL 150

Power supply for all Godox light tents with three lightsThis Godox LSC3 is intended as a replacement or if the supplied power supply is damaged.Suitable for the following products:Light tent Godox LST 40Light kit Godox LST 60Light kit Godox LST 80Scope of delivery:1 x Godox LSC3 (without cold current cable)

Godox RS25 25 cm extension  For the rigging of spotlights and reflectorsThe extension rod and connecting piece from Godox offer an extension of 25 cm for the rigging of spotlights and reflectors. The extension rod and connecting piece from Godox offer an extension of 25 cm for the rigging of spotlights and reflectors. The feature of the Godox RS25: 25 cm long connecting rodIncludes a rod connector   Scope of delivery: 2 x 25 cm extension rod1 x rod connector  

Godox mains adapter for two TL120 This power adapter fits the Godox TL120 RGB light stick and helps you to supply the light stick (sold separately) with power and allows you to either charge the battery or operate the light stick with mains power while it is connected to the mains. This mains adapter is designed to supply two TL120s with power at the same time.Scope of delivery: 1 x Godox mains adapter for two TL120s

Efficient video production with the Godox V-Mount Handle AK-B02 and ML60IIBi The importance of frictionless video production cannot be overemphasized. To optimize this process, we have developed the Godox Handle and Battery Holder for the Godox ML60IIBi  especially for you. It was created to accommodate a V-mount battery and gives you the flexibility to work anywhere, regardless of the availability of a mains power supply. Portable and handy design for maximum mobilityThe outstanding feature of this accessory is its portable and handy design. You can move around freely and work in different places. The compact nature of the Godox Handle and Battery Holder for ML60IIBi makes it your indispensable companion on the go. Compatibility with V-mount batteriesThe compatibility with V-mount batteries is a key feature of this accessory. You have the freedom to choose between different batteries to meet your power requirements. Note, however, that the V-Mount battery is not included and must be purchased separately. Special features for optimal performanceIn addition to its portable design and compatibility with V-Mount batteries, the Godox Handle and Battery Holder for ML60IIBi offers other special features. You can operate the LED light with V-mount batteries (not included). Included in the scope of delivery   1 x Godox AK-B02 handle and battery holder for ML60IIBi

Godox SW01 safety wire for LiteFlow system The 65 cm long safety wire from Godox is used to secure a Godox luminaire or similar luminaires. Scope of delivery: 1 x Godox SW01 safety wire    

Handle for the Godox ML60 or ML60Bi LED lightIf you have lost your handle for your Godox ML60 or ML60Bi or it is defective, you can find a replacement here.Scope of delivery1 x handle for the Godox ML60 or ML60Bi

Spare part retaining clip for light tent LSD and LST from GodoxThis retaining clip is a replacement part for a lost retaining clip.Suitable for all Godox LSD and LST light tents for product photography.Included in delivery:1 x retaining clip