Godox AK-B02 Handgrip for ML60IIBi

You have tripods in your closet and light modifiers on the wall, but no light that you can just plug in and take with you. The Godox ML100Bi fills exactly that gap: 120 watts of bi-color light in the size of a coffee cup, which you can mount on the tripod that’s already set up. You’re paying for the light, not for a second set of accessories. 2800 to 6500K bi-color, adapts to any ambient light CRI 97 and TLCI 98, skin tones remain natural Up to 34,300 lux with the 15° reflector—bright enough to compete with daylight Weighs just 487g and is the size of the palm of your hand—fits in any backpack Includes AD-E2 umbrella adapter—you can use umbrellas right away Control via the Godox Light App from up to 30 meters away Just the light—you already have the rest What’s included Light, protective cap, 15° reflector, AD-E2 umbrella adapter, power adapter, and cable. You’ll be ready to light your scene right away and can use umbrellas too. What’s not included: a tripod and a bag—which you’ve probably had sitting in your closet for ages. What’s Not Included No second reflector, no tripod, no carrying case, no battery grip. If you’re hesitating about any of these, read the last section: One of the two kits will be the more cost-effective option. Here’s what it looks like in everyday use Second light in your existing setup As a kicker or hair light next to your main light: You set the color temperature exactly to match what’s already there, and with a CRI of 97, nothing clashes. You can mount it on any tripod using the included head adapter. Interview in mixed lighting 2800 to 6500K continuously adjustable: You match the light that’s already there instead of fighting it. No color cast that you’ll have to correct in Lightroom later. Dimming ranges from 0 to 100 percent. Portrait against the sun With the 15° reflector, you get 34,300 lux at one meter. That’s enough to cleanly isolate a face against daylight. Eleven lighting effects—from fire to TV—are included for on-board film scenes. What you should know before ordering Need a tripod, bag, or a second reflector? Then check out the Kit1. It includes 15° and 36° reflectors, a tripod, the umbrella tilt, and a carrying case. Ordering these items separately rarely works out cheaper. Do you need battery power? The light also runs on a battery, but a handle isn’t included here. Either get the Kit2 with V-Mount handle, or you can retrofit the BG02 handle with a built-in 95-Wh battery. Bi-Color or RGB? If you want color effects, check out the ML100R, which ranges from 1,800 to 10,000K and offers full RGB. That comes at the cost of color accuracy: CRI 95 instead of the 97 here. For interviews and portraits, Bi-Color is the cleaner choice. Technical Details at a Glance Color temperature: 2,800 to 6,500K Color accuracy: CRI 97, TLCI 98 Brightness: 3,670 lux (1 m, 5,600K), up to 34,300 lux with a 15° reflector Power consumption: 120W Dimming: 0 to 100% Cooling: Fan Weight: 487g Dimensions: 12.19 x 11 x 4.6 cm Tripod thread: 1/4"-20 Package Contents 1 x LED Spot Light 1 x Protective cap 1 x 15° reflector 1 x Godox AD-E2 umbrella tilt 1 x Power adapter 1 x Cable

Finally a continuous LED light that doesn't eat half your camera bag. The Godox ML60IIBi runs at a solid 60 watts, flips between warm studio light and daylight, and fits in any kit–even as a clip-on module behind the lens. 60 Watt LED continuous light, Bi-Color (2800 to 6500 K) Compact and lightweight – no space hog in your kit CRI/TLCI over 95 – accurate colour, no colour grading needed Tilt joint and mounting for tripod or camera Powered via USB-C or optional battery pack (NP-F series) Real light that goes everywhere 60 watts that work The ML60IIBi is not a toy fill light. At 60 watts it lights a face at distance, plays well with a key light, or shines through a window–whatever you need. And it stays rock solid, never flickers. Pick your colour, not your kit Warm for portraits, daylight for outdoors, anything in between at a dial–all without two fixtures and without busting your bag. One light, one colour wheel. Colour is right from the start Instead of grading everything in Davinci later: the ML60IIBi ships calibrated to CRI/TLCI over 95. Your grade lives in camera. How this works in practice Portrait without the rig Drop the ML60IIBi in a tabletop stand, set the colour to your mood, and done–no mixer, no cable mess, no second PA. Shoot in an hour, colour locked in the edit. Fill light on every job When the sun is wrong or the window too small: slip the ML60IIBi into a stand, a ring-flash adapter, or a camera clip–and the colour matches your main light instantly. What to know before you order 60 watts works for – Solid key or fill light at close to mid range, pocket light for video, clip-on module for run-and-gun–not as a key light for high-speed work at f/1.4 from 30 feet away. For that, reach for strobes. Bi-Color means no RGB You dial between warm and daylight–everything in between is a blend. No colour effects like the ML100R. Need neon blue or green haze, that's a different light. No power supply in the box The head runs off USB-C–any modern power bank or laptop charger works. NP-F batteries slot on optionally (just clip, no fuss). Technical specs at a glance Output: 60 Watt LED Colour temperature: 2800 to 6500 K (Bi-Color) Colour accuracy: CRI/TLCI over 95 Power: USB-C or NP-F battery (optional) Mount: tilt joint, hot shoe, tripod thread Size: compact, lightweight, bag-friendly In the box 1 x Godox ML60IIBi LED continuous light Mounting hardware (joint, shoe) Optional: Diffuser / reflector (softbox function) NP-F battery and holder Tripod (not included)