Filter holder for plug-in filters from the Haida brand

Filter holder for Fujifilm XF 8-16mm F2.8 R LM WR lens for 150mm plug-in filterThis M15 filter holder kit is designed for use with a Fujifilm XF 8-16mm F2.8 R LM WR lens. It allows convenient use of up to two separately available 150 mm wide and 2 mm thick plug-in filters together with a separately available Haida Magnetic Filter for the Haida M15 Filter Holder. The Haida Magnetic Filter for the Haida M15 Filter Holder is mounted in a non-threaded aluminum alloy ring and is specifically designed for use between the included Haida M15 Filter Holder and a Filter Holder Adapter Ring. For filters such as the Haida Magnetic Circular Polarizer, the outer adjustment wheel of the filter holder is integrated into the filter ring, allowing independent rotation and adjustment of these types of filters.The aluminum alloy filter holder is pre-installed with a pair of plastic holders and is initially designed for a rectangular filter. Using the Haida M15 Filter Holder is as simple as placing the kit's adapter ring over the built-in hood of a Fujifilm XF 8-16mm F2.8 R LM WR lens, followed by an optional Haida magnetic filter for the Haida M15 Filter Holder. After attaching to an adapter ring, the filter holder's pull-and-release knob provides a reliable yet adjustable connection, allowing 360° rotation of the holder, which enhances the use of 150 mm wide rectangular plug-in filters with varying positioning.Advantages at a glance:Fits plug-in filters with a width of 150 mm and a thickness of 2 mmspecial for the Fujifilm XF 8-16 mm F2.8 R LM WR lensmounting and demounting of the filter holder is done by a locking knobFilter holder can be rotated 360Magnetic filter can be adjusted individually from the outside without disassembling the rest of the filterScope of delivery:1 x filter holder M15 for 150 mm filter1 x adapter set for Fujifilm XF 8-16 mm F2.8 R LM WR1 x cleaning cloth1 x lens cap holderThe polarizing filter must be ordered separately and can be found here.<?xml:namespace prefix ="o" ns ="urn:schemas-microsoft-com:office:office" />

Filter holder to Sony FE 12-24 mm F2.8 GM lens for 150 mm plug-in filterThis M15 filter holder kit is designed for use with a Sony FE 12-24mm F2.8 GM lens. It allows convenient use of up to two separately available 150 mm wide and 2 mm thick plug-in filters together with a separately available Haida Magnetic Filter for the Haida M15 Filter Holder. The Haida Magnetic Filter for the Haida M15 Filter Holder is mounted in a non-threaded aluminum alloy ring and is specifically designed for use between the included Haida M15 Filter Holder and a Filter Holder Adapter Ring. For filters such as the Haida Magnetic Circular Polarizer, the outer adjustment wheel of the filter holder is integrated into the filter ring, allowing independent rotation and adjustment of these types of filters.The aluminum alloy filter holder is pre-installed with a pair of plastic holders and is initially designed for a rectangular filter. Using the Haida M15 Filter Holder is as simple as placing the kit's adapter ring over the integral hood of a Sony FE 12-24mm F2.8 GM lens, followed by an optional Haida magnetic filter for the Haida M15 Filter Holder. After attaching to an adapter ring, the filter holder's pull-and-release knob provides a reliable yet adjustable connection, allowing 360° rotation of the holder, which enhances the use of 150 mm wide rectangular plug-in filters with varying positioning.Advantages at a glance:Fits plug-in filters with a width of 150 mm and a thickness of 2 mmspecial for the Sony FE 12-24 mm F2.8 GM lensmounting and demounting of the filter holder is done by a locking knobFilter holder can be rotated 360Magnetic filter can be adjusted individually from the outside without disassembling the rest of the filterScope of delivery:1 x filter holder M15 for 150 mm filter1 x adapter set for the Sony FE 12-24 mm F2.8 GM1 x cleaning cloth1 x lens cap holder<?xml:namespace prefix ="o" ns ="urn:schemas-microsoft-com:office:office" />

Haida M10 and M10-II light barrier Spare part for filter holder M10 and M10-II The light barrier is included in the original scope of delivery of the holder and if it ever gets lost, you can find a replacement here.Scope of delivery: 1 x Haida light barrier to M10

Haida M10-II Enthusiast Filter Set Expand your photographic possibilities with the Haida M10 II Enthusiast Kit! Our comprehensive filter set offers you as a passionate landscape and outdoor photographer professional solutions to push your creative limits. With the high-quality filter holder and the filters specially designed for the Haida M10 II series, you can capture unique images. Our Haida M10 II filter holder is the heart of this kit. You will appreciate the durability and stability of the filter holder, which is made of high-quality aluminum. Precise positioning of the 100 mm rectangular filters in front of your lens will be effortless. The mounting is very easy and the handling intuitive - an indispensable tool for your filter shots. The neutral density (ND) filter in our kit has the medium strength ND64. With this ND filter, you can reduce the amount of incident light to create mesmerizing effects like flowing water, blurry motion, or dramatic cloud formations. For high contrast situations, like stunning sunrises or sunsets, our Gradient ND (GND) filters are perfect. Our Circular Polarizer (CPL) filters reduce reflections and unwanted specularity on non-metallic surfaces. By simply rotating the CPL filter, you can adjust the intensity of polarization to make the sky appear bluer, highlight clouds, or improve the visibility of underwater landscapes. Of course, we've thought of the accessories, too! The included carrying case keeps your filters safe and organized - perfect for traveling! In addition to the metal filter holder, you'll also receive a lens cap and lens cloth to care for your equipment. Explore new creative possibilities and expand your photography skills with the Haida M10 II Enthusiast Kit. Whether you love landscape photography, long exposures, or architectural photography, this kit gives you the tools to capture stunning images with impressive detail and brilliant color. The benefits of this enthusiast kit at a glance: M10-II filter holder, latest versionDrop-in circular polarizer filterFor 100 mm wide and 2 mm thick filters, also from other manufacturersHolds up to 3x 100 mm wide filtersND1.8 neutral density filterND0.9 soft grade ND67-, 72-, 77-, and 82-mm adapter ringscarrying bagMicrofiber cleaning cloth Included in delivery: 1 x M10-II Filter Holder1 x 67mm M10 adapter ring1 x 72mm M10 adapter ring1 x 77mm M10 adapter ring1 x 82mm M10 adapter ring4 x adapter ring protection cap1 x M10-II Drop-in Nano-coating CPL Filter1 x Red-Diamond ND1.8 (64x) filter, 100x100mm1 x Red-Diamond soft gradient ND0.9 filter, 100x150mm1 x M10 drop-in frame ( if the drop-in polarizing filter is not used )1 x M10 carrying bag for 6 filters 100x100 or 100x150mm1 x Microfiber lens cleaning cloth, 30x30cm

Haida M15 magnetic nano-magnetic polarizing filterThe Haida M15 Magnetic CPL Filter is a circular polarizing filter designed specifically for use with the Haida M15 filter holder system. This filter attaches to the front of the filter holder and can be rotated independently of the drop-in filters already in the filter holder. But what makes this filter so special?Independent rotation from plug-in filters: one of the outstanding features of the Haida M15 Magnetic CPL filter is its ability to rotate independently from plug-in filters. This means you can adjust the polarizing filter to best suit your subject without having to change the position of other filters. This flexibility allows you to achieve the effects you want without wasting valuable time changing filters.Nano coating for impressive image quality: Another impressive feature of the Haida M15 Magnetic CPL filter is its nano coating. This special coating ensures outstanding image quality by reducing reflections and stray light. The result is clear, high-contrast images with vivid colors. Whether you're shooting landscapes or portraits, this nano-coating will take your images to the next level. Areas of application of the Haida M15 magnetic nano-magnetic polarizing filter The Haida M15 polarizing filter is versatile and suitable for various types of photography:Landscape photography In landscape photography, reducing reflections on water and glass surfaces is critical. The Haida M15 polarizing filter enables clear shots of stunning landscapes and captures the natural beauty of the surroundings.Architectural photography In architectural photography, straight lines and clear details are of utmost importance. The Haida M15 polarizing filter minimizes distortion and ensures crisp and precise architectural images.Porträt photography The Haida M15 polarizing filter can also show its strengths in portrait photography. The reduction of skin reflections and the increase in color saturation contribute to vivid portraits with natural beauty. This NanoPro MC magnetic polarizing filter is specially designed for the  Haida M15 filter system has been developed.Scope of delivery: 1 x NanoPro MC polarizing filter für the M15 system.<?xml:namespace prefix ="o" ns ="urn:schemas-microsoft-com:office:office" />  Typical questions related to this product: Does the filter affect the exposure time of my shots? The filter may slightly affect the exposure time, especially if the filter effect is used to the maximum. It is recommended to adjust the exposure accordingly. Is the Haida M15 magnetic pole filter with nano coating hard to clean? No, thanks to the nano-coating, the filter is easy to clean and resistant to fingerprints.

The Christmas gift for landscape photographers The 100 mm wide Haida slide-in filter set is packed in a beautiful box and contains everything an ambitious landscape photographer needs. The Haida M10-II filter holder can hold up to three slide-in filters and one drop-in filter. The adapter rings supplied allow the filter holder to be mounted on lenses with a filter diameter of 67 mm, 72 mm, 77 mm and 82 mm. Additional adapter rings are available from us individually. The three supplied slide-in filters are the most commonly used filters in landscape photography. The set includes a soft graduated neutral density filter with 3 f-stops, plus two neutral density filters, one with 6 f-stops and one with 10 f-stops. A graduated neutral density filter is used to darken an overexposed part of the image. The neutral density filters are used for general light reduction. This set includes the following products: 1 x M10-II filter holder1 x 67 mm M10 adapter ring incl. protective cap1 x 72 mm M10 adapter ring incl. protective cap1 x 77 mm M10 adapter ring incl. protective cap1 x 82 mm M10 adapter ring incl. protective cap4 x adapter ring protective cap1 x M10-II drop-in nano-coated CPL filter1 x neutral density filter ND1.8 (64x) filter, 100x100mm1 x neutral density filter ND3.0 (1000x) filter, 100x100mm1 x soft graduated ND filter ND0.9, 100x150mm1 x M10 drop-in frame (if the drop-in polarization filter is not used)1 x M10 carrying bag for 6 filters 100x100 or 100x150mm1 x lens cleaning cloth  

Haida M10 II Professional Kit for Landscape Photography Welcome to the world of professional filter photography with the Haida M10 II Professional Kit. This comprehensive filter set is designed to meet the needs of discerning photographers and expand their creative vision. The Professional Kit includes the state-of-the-art Haida M10 II Filter Holder and a comprehensive selection of high-quality filters designed specifically for professionals to take their photographic skills to a new level.   Haida M10 II Filter Holder: The M10 II filter holder is the centerpiece of this impressive kit. Made of high-quality aluminum, the filter holder is characterized by its sturdiness and durability. It is perfectly suited for intensive use in professional environments and under demanding conditions. With its precise filter positioning, it allows you to realize your creative ideas with ease and produce images of outstanding quality.   Haida ND Filter: The M10 II Professional Kit includes a selection of high-quality neutral density (ND) filters designed specifically for long exposures and demanding situations. The various ND filter strengths, ranging from ND8 to ND1000, offer the flexibility to extend exposure times and capture stunning effects such as flowing water or softly blurred motion.   Haida GND Filters: The gradient ND (GND) filters in the Professional Kit let you capture stunning landscape images with perfectly balanced contrast. With the soft and hard GND filters, you can harmoniously stage the sky and foreground even in difficult lighting situations such as sunset or sunrise.   Haida CPL Filters: The Professional Kit's Circular Polarizer (CPL) filters are essential for reducing reflections and improving color saturation and contrast. The CPL filters can eliminate unwanted reflections on non-metallic surfaces and turn the sky a brilliant blue. Carrying case and accessories: The M10 II Professional Kit comes with a customized carrying case to safely store and conveniently transport the valuable filters. The kit also includes a metal filter holder, lens cap and lens cloth to keep your equipment well maintained and protected.   Expand your photographic skills and discover the limitless possibilities of filter photography with the Haida M10 II Professional Kit. Whether you're a professional photographer striving for the highest image quality or an amateur photographer looking to realize your creative vision, this kit gives you the tools to create stunning images.   The benefits of this Professional kit at a glance:   M10-II filter holder, latest version Drop-in circular polarizer filter For 100mm wide and 2mm thick filters, including filters from other manufacturers Holds up to 3x 100mm wide filters ND0.9, 1.8, & 3.0 neutral density filters ND0.9 Soft, ND0.9 Hard, ND0.9 Rev GND 67-, 72-, 77-, and 82mm adapter rings Carrying case Microfiber cleaning cloth   Included in delivery:   1 x M10-II Filter Holder1 x 67 mm M10 adapter ring1 x 72 mm M10 adapter ring1 x 77 mm M10 adapter ring1 x 82 mm M10 adapter ring4 x adapter ring protective cap1 x M10-II drop-in multi-coated CPL filter1 x Red-Diamond ND3.0 (1000x) filter, 100x100mm1 x Red-Diamond ND1.8 (64x) filter, 100x100mm1 x Red-Diamond Soft GND0.9 filter, 100x150mm1 x Red-Diamond Hard GD0.9 filter, 100x150mm1 x M10 drop-in insert frame (if the drop-in polarizing filter is not used)1 x M10 carrying bag for 6 filters 100x100 or 100x150mm

Haida M10-II Slide Block for 2-PieceThe M10-II sliding block for 2-piece filters from Haida is equipped with a simple connection structure that allows assembly and disassembly without screws. This pair (for the left and right side of the filter) is compatible with 2 mm thick filters.This set is supplied together with the filter holder. It is a replacement part for a defective or lost slider block.Haida original number: HD4709Scope of delivery:2 pieces slider block 2 filters Haida M10-II filter holder.

Filter holder for Tamron SP 15-30 mm f2.8 Di VC USD lens for 150 mm plug-in filter.This M15 filter holder kit is designed for use with a Tamron SP 15-30mm f2.8 Di VC USD lens.  It allows convenient use of up to two separately available 150 mm wide and 2 mm thick plug-in filters together with a separately available Haida Magnetic Filter for the Haida M15 Filter Holder. The Haida Magnetic Filter for the Haida M15 Filter Holder is mounted in a non-threaded aluminum alloy ring and is specifically designed for use between the included Haida M15 Filter Holder and a Filter Holder Adapter Ring. For filters such as the Haida Magnetic Circular Polarizer, the outer adjustment wheel of the filter holder is integrated into the filter ring, allowing independent rotation and adjustment of these types of filters.The aluminum alloy filter holder is pre-installed with a pair of plastic holders and is initially designed for a rectangular filter.Using the Haida M15 Filter Holder is as simple as placing the kit's adapter ring over the integral hood of a Tamron SP 15-30mm f2.8 Di VC USD lens, followed by an optional Haida magnetic filter for the Haida M15 Filter Holder.  After attaching to an adapter ring, the filter holder's pull-and-release knob provides a reliable yet adjustable connection, allowing 360° rotation of the holder, which enhances the use of 150 mm wide rectangular plug-in filters with varying positioning.Advantages at a glance:Fits plug-in filters with a width of 150 mm and a thickness of 2 mmspecial for the Tamron SP 15-30 mm f2.8 Di VC USD lens and Tamron SP 15-30 mm f/2.8 Di VC USmounting and demounting of the filter holder is done by a locking knobFilter holder can be rotated 360Magnetic filter can be adjusted individually from the outside without disassembling the rest of the filterScope of delivery:1 x filter holder M15 for 150 mm filter1 x adapter set for the Tamron SP 15-30 mm f2.8 Di VC USD1 x cleaning cloth1 x lens cap holderThe polarizing filter must be ordered separately and can be found here.<?xml:namespace prefix ="o" ns ="urn:schemas-microsoft-com:office:office" />

Filter holder to Nikon 14-24mm F2.8G ED lens for 150mm plug-in filter.This M15 filter holder kit is designed for use with a Nikon AF-S NIKKOR 14-24mm f/2.8G ED lens. It allows convenient use of up to two separately available 150 mm wide and 2 mm thick plug-in filters together with a separately available Haida Magnetic Filter for the Haida M15 Filter Holder. The Haida Magnetic Filter for the Haida M15 Filter Holder is mounted in a non-threaded aluminum alloy ring and is specifically designed for use between the included Haida M15 Filter Holder and a Filter Holder Adapter Ring. For filters such as the Haida Magnetic Circular Polarizer, the outer adjustment wheel of the filter holder is integrated into the filter ring, allowing independent rotation and adjustment of these types of filters.The aluminum alloy filter holder is pre-installed with a pair of plastic holders and is initially designed for a rectangular filter. Using the Haida M15 Filter Holder is as simple as placing the kit's adapter ring over the built-in hood of a Nikon AF-S NIKKOR 14-24mm f/2.8G ED lens, followed by an optional Haida magnetic filter for the Haida M15 Filter Holder. After attaching to an adapter ring, the filter holder's pull-and-release knob provides a reliable yet adjustable connection, allowing 360° rotation of the holder, which enhances the use of 150 mm wide rectangular plug-in filters with varying positioning.Advantages at a glance:Fits plug-in filters with a width of 150 mm and a thickness of 2 mmspecial for the Nikon AF-S NIKKOR 14-24 mm f/2.8G ED lensMounting and dismounting of the filter holder is done by a locking knobFilter holder can be rotated 360Magnetic filter can be adjusted individually from the outside without disassembling the rest of the filterScope of delivery:1 x filter holder M15 for 150 mm filter1 x adapter set for the Nikon 14-24 mm F2.8G ED1 x cleaning cloth1 x lens cap holder

Haida M10 Adapter Ring for Sony 14mm f 1.8 GM Lens   This Haida filter holder adapter ring is designed to allow the use of a Haida M10 filter holder on an Sony 14mm f 1.8 GM Lens. Using the filter holder is easily accomplished by first sliding the rear lens collar over the back of the lens until it achieves a secure fit. Then the adapter ring for the front filter holder can be screwed onto the front of the mounted rear lens collar. The adapter ring and lens collar are made of aluminum alloy to ensure a long service life with low weight. The advantages at a glance: Haida M10 system can be used on an ultra-wide angleeasy mountingUse of up to 3 plug-in filters   Note: Due to the design of the lens, the Haida M10 holder can NOT be used with the M10 drop-in filters, but only with the plug-in filters.   For the technicians: Filter holder system compatibility Haida M10material: aluminumWeight: 120grHaida number: HD4761 Suitable for the following lens: Sony 14mm f 1.8 GM Scope of delivery: 1 x Haida M10 Adapter to Sony 14mm f 1.8 GM

Haida M10-II filter holder kit with lens adapter ring and drop-in circular polarizer filter The M10-II filter holder from Haida uses the supplied  lens adapter ring to attach the M10-II filter holder to the front of the lens. The M10-II filter holder can hold up to three rectangular filters with a width of 100 mm and a thickness of 2 mm as well as a single M10-II drop-in filter, such as the supplied CPL filter.

The Haida M10-II filter holder has been enhanced to allow even more convenient use of up to three separately available 100 mm wide, 2 mm thick filters together with a separately available drop-in circular polarizer, neutral density, graduated neutral density or neutral density-polarizer combination filter. For still images or video capture where a drop-in filter is not used, an empty drop-in cover is provided to occupy the filter holder accessory slot for these filters. The cover is then used to prevent stray light, which could have undesirable effects on exposure, from getting between the filter holder and the lens behind it.This aluminum alloy filter holder is pre-installed with two pairs of plastic filter slots and initially configured to hold two rectangular filters. An additional pair of filter slots is also provided so that the Haida M10-II filter holder can be configured to hold three rectangular filters. Using the filter holder is simple, starting by screwing a separately available Haida M10 filter holder adapter ring onto a lens with a corresponding front filter thread. Once mounted on an adapter ring, the filter holder's push-and-release lever helps create a reliable yet adjustable connection that allows the holder to rotate 360°, which in turn enables the use of graduated filters and other filters that are enhanced by varying positioning. To prevent stray light from entering between an installed filter and a connected lens, two seals are attached to the front of the M10-II filter holder. These gaskets are positioned so that together they form a seal between the slots of the filter holder.Easy attachment to an adapter ring with a push and release lever.The locking lever provides a reliable, yet adjustable connection that allows 360° rotation of the filter holder, favoring the use of graduated neutral density and other filters enhanced by varying positioning. Built-in seals on the front of the filter holder further help prevent stray light from getting between an installed filter and a connected lens.With the new fixing screw on the side, the position of the filter holder can also be locked.Scope of delivery:1 x Haida M10-II filter holder1 x Drop-in empty insert frame (to be used when the drop-in polarizing filter is not in use)1 x storage bag

Haida M15 filter holder: maximize your photographic creativity Photography is an art form that allows us to capture and interpret the world in our own way. But to get the most out of your photographic adventures, you need the right gear. The Haida M15 filter holder is an indispensable tool for all photographers who want to push their creative boundaries. In this article, we take a close look at the Haida M15 filter holder and reveal how it can revolutionize your photographic journey.The Haida M15 filter holder at a glance The Haida M15 filter holder is a remarkable accessory for photographers who strive for the highest image quality. This filter holder allows practical use of up to two separately available 150 mm wide and 2 mm thick filters together with a separately available Haida magnetic filter for the Haida M15 filter holder.High quality materials and präzision. The filter holder is made of aluminum alloy, which is not only lightweight, but also extremely durable. The präzision with which this filter holder was developed is impressive. It fits perfectly between the Haida M15 filter holder and a separately available adapter ring for the filter holder, allowing for seamless integration.Flexibilityät in the use of filters. The Haida M15 filter holder is designed to accommodate a variety of filters. A special highlight is the integration of a Haida Magnetic Circular Polarizer, where the external rotation of the filter holder interacts with the filter ring. This allows for independent rotation and adjustment of filters, which is often critical in photography.Easy to use, impressive results The application of the Haida M15 filter holder is very simple. To begin, a separately available Haida M15 filter holder adapter ring is placed on a compatible lens. Then an optional Haida magnetic filter can be added to the Haida M15 filter holder. After placing the filter holder on the adapter ring, the filter holder pull and release knob helps you make a reliable, yet adjustable connection. This allows the filter holder to rotate 360°, which is beneficial when using rectangular gray filters or other filters that require variable positioning. Versatile filter options With the Haida M15 filter holder you can give free rein to your creativity. You can combine and experiment with different filters to create unique effects. From ND filters üto graduated filters to specialty filters, this filter holder accommodates it all and gives you full control üover your images.Müheless operation The operation of the Haida M15 filter holder is child's play. The filter holder is easy to attach and detach, and the rotary knob allows for quick adjustments. You'll never miss a precious shooting moment while experimenting with different filters. Adapters to this filter holder with a screw thread can be found here: Haida M15 adapter ring 105mm Haida M15 adapter ring 95mm Haida M15 adapter ring 82mm Haida M15 adapter ring 77mm Haida M15 adapter ring 72mm Haida M15 adapter ring 67mm Haida number: HD4320<?xml:namespace prefix ="o" ns ="urn:schemas-microsoft-com:office:office" />Scope of delivery: 1 x Haida M15 filter holder (without lens or thread adapter). 1 x holder für second filterTypical questions related to this product: What kind of filters can I use with the Haida M15 filter holder? You can use up to two filters with a width of 150mm and a thickness of 2mm. This opens up a variety of possibilities for you, including ND filters and graduated filters. How do I attach the Haida M15 filter holder to my lens? You simply place a separately available Haida M15 filter holder adapter ring on your lens and attach the filter holder to it. Can I use filters from other brands? Yes, you can use filters from other brands as long as they have the correct dimensions.

Filter holder to Sigma 14-24 mm F2.8 DG HSM Art lens for 150 mm plug-in filterThis M15 filter holder kit is designed for use with aSigma 14-24 mm F2.8 DG HSM Art lens.  It allows convenient use of up to two separately available 150 mm wide and 2 mm thick plug-in filters together with a separately available Haida Magnetic Filter for the Haida M15 Filter Holder. The Haida Magnetic Filter for the Haida M15 Filter Holder is mounted in a non-threaded aluminum alloy ring and is specifically designed for use between the included Haida M15 Filter Holder and a Filter Holder Adapter Ring. For filters such as the Haida Magnetic Circular Polarizer, the outer adjustment wheel of the filter holder is integrated into the filter ring, allowing independent rotation and adjustment of these types of filters.The aluminum alloy filter holder is pre-installed with a pair of plastic holders and is initially designed for a rectangular filter.Using the Haida M15 Filter Holder is as simple as placing the kit's adapter ring over the built-in hood of a Sigma 14-24mm F2.8 DG HSM Art lens, followed by an optional Haida magnetic filter for the Haida M15 Filter Holder.  After attaching to an adapter ring, the filter holder's pull-and-release knob provides a reliable yet adjustable connection, allowing 360° rotation of the holder, which enhances the use of 150 mm wide rectangular plug-in filters with varying positioning.Advantages at a glance:Fits plug-in filters with a width of 150 mm and a thickness of 2 mmspecial for the Sigma 14-24 mm F2.8 DG HSM Art lensmounting and demounting of the filter holder is done by a locking knobFilter holder can be rotated 360Magnetic filter can be adjusted individually from the outside without disassembling the rest of the filterScope of delivery:1 x filter holder M15 for 150 mm filter1 x adapter set for the Sigma 14-24 mm F2.8 DG HSM Art ( DG HSM = Canon EF or Nikon F Mount)1 x cleaning cloth1 x lens cap holder<?xml:namespace prefix ="o" ns ="urn:schemas-microsoft-com:office:office" />

Haida M10 Filter Holder 100mm for 52mm   The new generation of Haida filter holders is finally here! It guarantees even more fun and pleasure for landscape photographers. The prototype has already been tested by many Haida ambassadors and suggestions for improvements have been implemented.  Took a little longer, but we can assure you: The waiting was worth it. Everything that was possible was improved and optimized on the M10 filter holder: - The filter holder can be used very quickly with a! It can be assembled and disassembled by hand.- No more screwing around necessary: Holder on it and ready- Made of black anodised aluminium alloy- Wear-free unlocking bolt, made of solid metal- Optimized design- The polarizing filter is directly in front of the lens. - DROP IN System and DROP IN Filter for even more filter combinations- Easier handling of the DROP IN polarizing filter- DROP IN filters can be easily changed mega- No more vignetting at 16-17 mm (full format), even when using 3 filters at the same time All landscape photographers who work with wide-angle focal lengths can breathe a sigh of relief: vignetting is a thing of the past with this filter. The polarizing filter is directly in front of the lens. When not in use, you can use the supplied insertable frame to prevent unwanted incidence of light. It fits up to 3 filters (100mm system) in the holder, also those of other filter manufacturers. Two slots are pre-assembled, another one can be added. The screws are supplied. The newly developed polarizing filter Drop In NanoPro MC is supplied with the filter kit. The slot for this is firmly integrated in the frame. The polarizing filter can be easily adjusted with the screw without having to remove the holder from the lens. It is located directly in front of the lens, so vignetting or shading no longer occur. Further DROP IN Filters - ND Filter- Night Clear Filter- 2-1 Polarization / ND Filter With this kit you receive a filter system of the extra class, with which you will have much joy. Scope of delivery: 1 piece M10 metal filter holder1 piece Drop-In NanoPro MC Polarization plug-in filter1 piece Drop-in frame ( to be used when the Drop-in polarization filter is not used )1 piece metal adapter ring in the size 52mm 1 piece stretcher / storage bag

Filter holder to Sony 14 mm f1.8 GM lens for 150 mm plug-in filterThis M15 Filter Holder Kit is designed for use with a Sony 14 mm f1.8 GM lens. It allows convenient use of up to two separately available 150 mm wide and 2 mm thick plug-in filters together with a separately available Haida Magnetic Filter for the Haida M15 Filter Holder. The Haida Magnetic Filter for the Haida M15 Filter Holder is mounted in a non-threaded aluminum alloy ring and is specifically designed for use between the included Haida M15 Filter Holder and a Filter Holder Adapter Ring. For filters such as the Haida Magnetic Circular Polarizer, the outer adjustment wheel of the filter holder is integrated into the filter ring, allowing independent rotation and adjustment of these types of filters.The aluminum alloy filter holder is pre-installed with a pair of plastic holders and is initially designed for a rectangular filter. Using the Haida M15 Filter Holder is as simple as placing the kit's adapter ring over the integral hood of a Sony 14mm f1.8 GM lens, followed by an optional Haida magnetic filter for the Haida M15 Filter Holder. After attaching to an adapter ring, the filter holder's pull-and-release knob provides a reliable yet adjustable connection, allowing 360° rotation of the holder, which enhances the use of 150 mm wide rectangular plug-in filters with varying positioning.Advantages at a glance:Fits plug-in filters with a width of 150 mm and a thickness of 2 mmspecial for the Sony 14 mm f1.8 GM lensMounting and dismounting of the filter holder is done by a locking knobFilter holder can be rotated 360Magnetic filter can be adjusted individually from the outside without disassembling the rest of the filterScope of delivery:1 x filter holder M15 for 150 mm filter1 x adapter set for the Sony 14 mm f1.8 GM1 x cleaning cloth1 x lens cap holder

Haida M15 Filter Bag The Haida M15 filter bag is the ideal solution for photographers who want to transport their valuable filters safely and store them in an organized way. With high-quality workmanship, a well thought-out design and practical features, this bag ensures maximum protection and comfortable handling. The Haida M15 filter bag was specially developed for the Haida M15 filter system. It offers space for several rectangular filters as well as a round filter and ensures a clear arrangement of the filter elements. The robust, weatherproof material protects the filters from knocks, scratches and external influences. Thanks to the compact design and secure closure system, photographers can have their filters to hand at all times – whether they are on an outdoor shoot, traveling or in the studio. Special features and benefits Optimal protection: The bag is made of durable, water-repellent material that protects your filters from dust, moisture and scratches. Intelligent organization: Multiple compartments allow for organized storage of up to six rectangular filters and one round filter. Quick access: The filters are easily accessible thanks to the well-thought-out interior layout, ensuring quick filter changes. Robust workmanship: High-quality seams, reinforced edges and a secure closure ensure a long service life. Compact size: The bag is lightweight and space-saving, so it can easily be stored in a photo bag or backpack. Compatibility The Haida M15 Filter Pouch is specially designed for the Haida M15 filter system and offers space for the following filter types: Rectangular filters measuring 150 x 100 mm or 150 x 150 mm Round M15 magnetic filters Compatible with Haida M15 filter holders and corresponding accessories Technical details Material: High-quality, water-repellent and durable polyester Dimensions: approx. 20 cm x 15 cm x 5 cm (L x W x H) Weight: approx. 300 g Capacity: Up to 6 rectangular filters + 1 round filter Closure: Secure Velcro or zipper Color: Black with Haida logo Contents 1x Haida M15 filter bag 1x shoulder strap for comfortable transport 1x silica gel drying agent (to protect against moisture) With the Haida M15 filter bag, your filters are well protected and always ready for use – perfect for professional and ambitious photographers who value safe and practical storage.

Haida M10 Adapter Ring for LAOWA 12mm F2.8with this adapter, the Haida M10 filter system can also be used on a Laowa Objetkiv.Suitable for:  LAOWA 12mm F2.8Scope of delivery: 1x adapter to fit Laowa 12mm F2.8

Haida M10 Adapter Ring for LAOWA 10-18mm F4.5-5.6with this adapter the Haida M10 filter system can also be used on a Laowa Objetkiv.Fit too: LAOWA 10-18mm F4.5-5.6Scope of delivery:1x Adapter fits Laowa 10-18mm F4.5-5.6

The protective cap fits all M10 adapter rings from 37-82 mm diameter and protects your lens during transport.Included in delivery:1 x Protection cap for M10 adapter ring

With this kit you have an easy start into landscape photography.   The kit includes: 1 x M15 filter holder1 x M15 magnetic polishing filter1 x Red Diamond ND3.0 grey filter 150x150mm1 x Red Diamond ND 0.9 soft graduated filter 150x170mm1 x Haid M15 filter bag for transport   The only additional thing you need is an adapter for your objetkiv.   At the moment it is available for the following Objetkiv:   Haida M15 Adapter Ring zu Canon 14mm F2.8L II Objektiv   Haida M15 Adapter Ring zu Fujifilm XF 8-16mm F2.8 R LM WR Objektiv   Haida M15 Adapter Ring zu Sigma 12-24mm F4.0 DG HSM Art Objektiv   Haida M15 Adapter Ring zu Sony 12-24mm F4 G Objektiv   Haida M15 Adapter Ring zu Nikon 14-24mm 2.8G ED Objektiv   Haida M15 Adapter Ring zu Tamron SP 15-30mm f/2.8 Di VC USD   Haida M15 Adapter Ring zu Sigma 14mm F1.8 DG HSM Art Objektiv   Haida M15 Adapter Ring zu Sigma 20mm F1.4 DG HSM Objektiv   Haida M15 Adapter Ring zu Sigma 14-24mm F2.8 DG HSM Art Objketiv   Haida M15 Adapter Ring zu Nikon PC 19mm F4E ED Tilt-Shift Objektiv   Haida M15 Adapter Ring zu Canon TS-E 17mm F4L Tilt-Shift Objektiv   Haida M15 Adapter Ring zu Olympus M. Zuiko ED 7-14mm F2.8 PRO Objektiv   Haida M15 Adapter Ring zu Tokina 16-28mm F2.8 PRO AT-X Objektiv  

Haida M10-II Master Kit for Landscape Photography   Experience the master class of filter photography with the Haida M10 II Master Kit. This comprehensive filter set is designed to delight professional and amateur photographers alike and expand their creative possibilities. The Master Kit includes the state-of-the-art Haida M10 II Filter Holder and an impressive selection of high-quality filters designed specifically to meet the demanding needs of photographers.   Haida M10 II Filter Holder: The M10 II filter holder is the centerpiece of this impressive kit. Made from precision-engineered aluminum, the filter holder boasts a rugged construction yet lightweight design, ideal for on-the-go use. With the new quick-release mount, the filter holder attaches to the front of the lens in a snap. Precise positioning of the filter lets you unleash your creative vision and achieve stunning results.   Haida ND Filters: The M10 II Master Kit includes a range of high-quality Neutral Density (ND) filters specifically designed for long exposures and stunning effects. The different strengths of the ND filters, from the light ND8 to the extreme ND1000, allow you to extend the exposure time to capture fascinating effects such as flowing water or blurred motion.   Haida GND Filters: The Master Kit's gradient ND (GND) filters let you capture stunning landscape shots with balanced contrast and detail. The soft and hard GND filters offer the flexibility to harmonize the sky and foreground even in difficult lighting conditions such as sunset or sunrise.   Haida CPL Filter: The Master Kit's Circular Polarizer Filters (CPL Filters) are essential for reducing reflections and enhancing colors and contrasts. The CPL filter eliminates unwanted reflections on non-metallic surfaces and renders the sky a brilliant blue. Carrying case and accessories: the M10 II Master Kit comes with a customized carrying case for safe storage and easy transportation of the valuable filters. The kit also includes a metal filter holder, lens cap and lens cloth to keep your equipment well maintained and protected.   Expand your photography skills and discover the incredible world of filter photography with the Haida M10 II Master Kit. Whether you're a professional photographer striving for the highest image quality or an amateur photographer looking to realize your creative vision, this kit gives you the tools to create stunning images.   The benefits of this enthusiast kit at a glance:   M10-II filter holder, latest version Drop-in circular polarizer filter For 100mm wide and 2mm thick filters, including filters from other manufacturers Holds up to 3x 100mm wide filters ND0.9, 1.8, & 3.0 neutral density filters ND0.9 Soft, ND0.9 Hard, ND0.9 Rev GND 67-, 72-, 77-, and 82mm adapter rings Carrying case Microfiber cleaning cloth   Included in delivery:   1 x M10-II Filter Holder1 x 67 mm M10 adapter ring1 x 72 mm M10 adapter ring1 x 77 mm M10 adapter ring1 x 82 mm M10 adapter ring4 x adapter ring protective cap1 x M10-II Drop-in Nano-coating CPL Filter1 x Red-Diamond ND3.0 (1000x) filter, 100x100mm1 x Red-Diamond ND1.8 (64x) filter, 100x100mm1 x Red-Diamond ND0.9 (8x) filter, 100x100mm1 x Red-Diamond soft gradient GND 0.9 filter, 100x150mm1 x Red-Diamond reverse gradient GND 0.9 filter, 100x150mm1 x Red-Diamond hard gradient GND 0.9 filter, 100x150mm1 x M10-II drop-in insert frame (if the drop-in polarizing filter is not used)1 x M10 carrying bag for 6 filters 100x100 or 100x150mm

Haida M10-II slide block for 3-piece filterThe M10-II Slider Block for 3-piece filters from Haida features a simple connection structure that allows assembly and disassembly without screws. This pair (for the left and right side of the filter) is compatible with 2 mm thick filters.This set is supplied together with the filter holder. It is a replacement part for a defective or lost slider block.Haida original number: HD4709-3Scope of delivery:2 pieces slider block 3 filters Haida M10-II filter holder