ND filter for landscape photography

Haida Rücklinsen holder to Sony 14 mm f 1.8 GM This rear filter adapter ring for the Sony 14 mm f/1.8 GM lens from Haida allows selected Haida filters to be attached behind the rear element of a lens that does not have a conventional filter thread on the front. Simply remove the existing rear ring from the lens with the included mini-screwdriver, then install this precision-engineered aluminum adapter ring in its place. Then, the appropriate filters suitable for the adapter ring can be easily inserted as needed and removed when ready. Once the adapter ring is installed, there is no reason to remove it. It can stay in place indefinitely without affecting the function or performance of the lens.Lens Compatibility Sony 14mm f/1.8 GM Lens (SEL-14F18GM)Haida item number: HD4763Scope of delivery: 1 x Haida Rücklinsen holder to Sony 14 mm f 1.8 GM

Landscape photographers watch out, this bag is a special production for our own brand. A well thought-out design allows you to transport plug-in filters for the 150mm system safely through the landscape. The outer fabric is durable cotton, the outside is reinforced so that nothing can happen to your precious filters.There is space for a filter holder and in another 8 compartments there is enough room to store all the filters you need.On each side there is a zipper so that the filters can be easily removed and stored again when in use.It can also be attached to the belt, which has a fastening possibility at the back. The long belt is adjustable and can also be removed.With the supplied short strap and the included velcro tape, the bag can also be attached directly to the tripod.All in all a filter bag, where everything has been thought of and which is also haptically a pleasure.The bag can be used with 150x150 and also with 170x150 filters.Dimensions:height: 20 cmwidth: 19 cmDepth with closed zipper: 5 cmDepth with open zipper on top: 18 cmWeight 385gr.Scope of delivery:1 x filter bag1 x velcro tape1 x long transport belt1 x short belt

Haida Rear Lens Mist Black 1/4 Filter Type 2 The Haida Rear Lens Mist Black 1/4 Filter Type 2 is a high-quality effect filter that attaches directly to the rear lens of compatible lenses. It gives your photos and videos a soft, cinematic glow by softening light sources while slightly reducing contrast. Perfect for portraits, night shots, or creative film looks straight out of the camera. This filter is based on the finest optical technology. Micro-particles incorporated into the filter glass scatter bright light in a targeted manner without noticeably affecting the sharpness of your images. This allows you to create atmospheric, soft highlights and a harmonious overall picture. The Haida Rear Lens Mist Black 1/4 Filter Type 2 has been specially developed for cameras with rear lens filter systems and offers: Natural soft focus without significant loss of detail Minimal reflections thanks to multi-coated surface Compact, robust design ideal for photography and videography Special features and advantages Cinematic look directly in the camera – less post-processing required Soft glow effect with bright light sources, perfect look for film and portraits Reduced contrast, but high detail retention in shadow areas High-quality workmanship for clear, high-quality results Ideal for run-and-gun filmmakers who want to work quickly and flexibly Compatibility This filter is compatible with lenses that support the Haida Type 2 rear lens filter system. Ideal for mirrorless cameras with large image sensors and interchangeable lenses. Technical Details Filter type: Rear lens diffusion filter Black Mist 1/4 Series: Type 2 Material: High-quality optical glass Coating: Multi-layer coating, dirt, oil, and water repellent Strength: 1/4 – subtle diffusion for professional film looks Very light, compact, and ideal for mobile work Scope of delivery Haida rear lens Mist Black 1/4 filter type 2 Protective box or storage case

Haida Rücklinsen holder to Sony  FE 12-24mm F28 GM This rear filter adapter ring for Haida's Sony FE 12-24mm f/2.8 GM lens allows you to install select Haida filters behind the rear element of a lens that does not have a conventional filter thread on the front. Simply remove the existing rear ring from the lens with the included mini-screwdriver, then install this precision-engineered aluminum adapter ring in its place. Then, the appropriate filters suitable for the adapter ring can be easily inserted as needed and removed when ready. Once this adapter ring is installed, there is no reason to remove it. It can stay in place indefinitely without affecting the function or performance of the lens. This adapter ring for Rücklinsenfilter, is suitable für the following lenses:         Sony  FE 12-24mm F2.8 GM Sony 14mm f/1.8 GM LensHaida item number: HD4642Scope of delivery: 1 x Adapter ring

Haida NanoPro Filter Set DJI Mini 4 Pro The Haida NanoPro Filter Set DJI Mini 4 Pro is the perfect choice if you want to take your drone photography to the next level. With high-quality ND and CPL filters, you can achieve professional image quality, reduce overexposure, and get the most out of your aerial shots. The filters from Haida's NanoPro series feature high-quality multi-layer coating that reduces reflections, stray light, and color shifts. They are specially designed for the DJI Mini 4 Pro and, thanks to their lightweight and robust frame, are easy to install without affecting the flight performance of your drone. The filters allow for longer exposure times, natural colors, and razor-sharp results—ideal for video recording in strong sunlight or for creative long exposures. Special features and advantages Nano coating: Scratch-resistant, water- and stain-repellent for maximum durability. Lightweight design: Minimal additional weight, perfectly optimized for the Mini 4 Pro. Versatile applications: Ideal for landscape, architecture, and videography. Professional image control: ND filters reduce light, CPL filters minimize reflections. Compared to standard filters, Haida NanoPro filters offer improved color neutrality and significantly higher robustness. Compatibility DJI Mini 4 Pro drone Technical Details Filter Type: ND & CPL Coating: Multi-layer NanoPro coating Weight: approx. 1 g per filter Material: High-quality optical glass with aluminum frame Easy clip-on mounting Scope of delivery Haida NanoPro ND filters (various strengths ND8, ND16, ND32, ND64, and ND256) Haida NanoPro CPL filter Protective case for safe storage

ND filter plug-in filter ND 0.9 100 mm from Haida   The rectangular Haida Gray Filter ND0.9 provides shutter speed extension during exposure in a shot by reducing the amount of incoming light on the sensor. The Neutral Density 0.9 filter is rather weak and is particularly suitable for low-light shooting or videographers. A three-stop latitude allows photographers and videographers to work with a more open aperture in the midday sun. The ND 0.9 gray filter is particularly suitable for:Long exposures in low light when you don't want to extend the shutter speed too long. For example, for sunrises and sunsets or cloudy skies. Videographers are just as enthusiastic as photographers about the ND0.9 and use it for lower apertures in sunlight.  With an ND0.9 you can achieve the following shutter speeds: At 1/2000sec, the shutter speed increases to 1/250sec.At 1/500sec the shutter speed increases to 1/60secAt 1/125sec, the shutter speed increases to 1/15sec. Multi-coated optical glass reduces reflectionsThe Haida gray filter is made of glass that is ground and polished on both sides for durability and the highest optical quality. The two-millimeter-thin glass filter is free of color casts and offers high resolution. Its special multi-coating reduces the occurrence of reflections and makes the filter insensitive to scratches. Easy to mount with separately available adapter rings and filter holder.For mounting, screw the matching adapter ring from the Haida M10 filter system onto the lens and attach the filter holder to it. In this way, the graduated filter can be easily used with lenses from a focal length of approximately 16 millimeters on a full-frame camera (APS-C from approximately 11 millimeters).Up to three slots in the holder accommodate the desired creative filters. When inserting the ND filter, please make sure that the gray filter covers the lens properly so that no light enters sideways.   Metal box for safe storage and transportationThe filter comes with a metal box. This is perfect for transporting or storing the filter well protected. All advantages at a glance: Ideal for landscape photographyHigh-quality optical glass with nano coatingFor more open apertures in daylightAbsolute color neutralityEasy insertion instead of screwing (adjust image detail and insert filter directly)Scratch-resistant multi-coating suppresses reflectionsRed Diamond version, significantly increased break resistanceRounded R5 edges for easier mountingPart of a complete filter system with optionally available adapter rings and filter holder Technical details: Material: glass, multi-coated, scratch resistant, splash water protectedCoating: Nano Pro coatedPower: 0.9 (3 stops)Dimensions (W x L x H): 100 x 100 x 2 mmWeight: 65 g Scope of delivery: 1 x Haida Gray Filter ND 0.9 100 x 100 mm1 x transport box Gray filter calculationThe aperture reduction of ND filters is calculated as follows:The density of ND filters is usually given in steps of 0.3.To obtain the aperture reduction, first multiply the value by 10 and then divide by 3. 0.3 x 10 = 3 | 3 = 1 f-stop0.9 x 10 = 9 | 3 = 3 f-stops0.6 x 10 = 6 | 3 = 2 f-stops1.2 x 10 = 12 | 3 = 4 f-stops1.8 x 10 = 18 | 3 = 6 f-stops3.0 x 10 = 30 | 3 = 10 f-stops3.6 x 10 = 36 | 3 = 12 f-stops4.5 x 10 = 45 | 3 = 15 f-stops  

Haida Rear Lens Filter Clear Night Type I without holder Remove annoying light pollution from night shots – the Haida Rear Lens Filter Clear Night Type I ensures clearer, more detailed images and is the ideal companion for demanding night and astrophotography. Without holder – for maximum flexibility when used with Haida M rear lens adapters. The Haida Clear Night Type I rear lens filter has been specially developed to effectively reduce light pollution, especially from artificial light sources such as street lights or industrial lighting. It specifically filters out the yellowish-orange wavelengths of light (typically sodium vapor lamps), resulting in a more natural night sky and better contrasts. This rear lens filter attaches directly to the camera's bayonet mount (in combination with a suitable Haida adapter), providing an elegant solution without adding bulk to the front of the lens – perfect for wide-angle lenses. Special features and advantages Optimized for night photography: Less light pollution, more stars and details visible. Type I: Suitable for lenses with this bayonet mount design. Lightweight, compact, and robust: Ideal for travel and outdoor shooting. Easy to install: Rear lens mounting saves space and weight. No vignetting: No dark corners, even with ultra-wide-angle lenses. Compatibility Sigma 14-24mm F/2.8 DG DN Art lens for Sony E and Leica L Sony FE 12-24mm F4 G Sony FE 12-24mm F2.8 GM Nikon Z 14-24mm F2.8 S Sony 14mm f/1.8 GM Sigma 14mm f/1.4 DG DN Art Leica L Sigma 14mm f/1.4 DG DN Art Sony E Leica Super-Vario-Elmarit-SL 14-24 f/2.8 ASPH Technical details Material: Optical glass with nano coating Diameter: Rear lens compatible (depending on adapter) Type: Clear Night Type I Coating: Multi-coated, water- and oil-repellent Weight: approx. 5 g Mounting: Rear lens position, without holder Haida number: HD4647 Scope of delivery Haida Clear Night rear lens filter Type I (without holder)

ND filter plug-in filter ND 1.8 100 mm Haida   Little Stopper Gray Filters ND1.8 are perfect for long exposures during sunsets.   The Haida rectangular ND1.8 gray filter provides shutter speed extension during exposure in a shot by reducing the amount of incoming light on the sensor. The Neutral Density 1.8 filter is a medium-strength gray filter - which is also called a Little Stopper - and is particularly suitable for long exposures of water, sunrises or sunsets. It is also interesting for videographers who want to film with very low apertures. A 6-stop latitude makes the surface look smooth and sleek in long exposures of water. For filmmakers, it allows working with very low f-stops in the midday sun. The ND1.8 gray filter is especially suitable for:Perfect for long exposures of water such as rivers, lakes, ocean, streams or other moving subjects.Videographers allows to work with very low apertures. For example, with apertures around F1.4.When flashing against the sun, for example in portrait photography, the ND filter allows you to extend the camera shutter speed into the range of the flash sync speed. With an ND1.8 you can achieve the following shutter speeds: At 1/2000sec, the shutter speed is extended to 1/30sec.At 1/500sec the shutter speed increases to 1/8secAt 1/125sec, the shutter speed increases to 1/2sec. Multi-coated optical glass reduces reflectionsThe Haida gray filter is made of glass that is ground and polished on both sides for durability and the highest optical quality. The two-millimeter-thin glass filter is free of color casts and offers high resolution. Its special multi-coating reduces the occurrence of reflections and makes the filter insensitive to scratches. Easy to mount with separately available adapter rings and filter holder.For mounting, screw the matching adapter ring from the Haida M10 filter system onto the lens and attach the filter holder to it. In this way, the graduated filter can be easily used with lenses from a focal length of approximately 16 millimeters on a full-frame camera (APS-C from approximately 11 millimeters).Up to three slots in the holder accommodate the desired creative filters. When inserting the ND filter, please make sure that the gray filter covers the lens properly so that no light enters sideways.   Metal box for safe storage and transportationThe filter comes with a metal box. This is perfect for transporting or storing the filter well protected. All advantages at a glance: Ideal for landscape photographyHigh-quality optical glass with nano coatingFor more open apertures in daylightAbsolute color neutralityEasy insertion instead of screwing (adjust image detail and insert filter directly)Scratch-resistant multi-coating suppresses reflectionsRed Diamond version, significantly increased break resistanceRounded R5 edges for easier mountingPart of a complete filter system with optionally available adapter rings and filter holder Technical details: Material: glass, multi-coated, scratch resistant, splash water protectedCoating: Nano Pro coatedStrength: ND1.8 (6 stops)Dimensions (W x L x H): 100 x 100 x 2 mmWeight: 65 g Scope of delivery: 1 x Haida Gray Filter ND1.8 100 x 100 mm1 x transport box Gray filter calculation The aperture reduction of ND filters is calculated as follows:The density of ND filters is usually given in steps of 0.3.To obtain the aperture reduction, first multiply the value by 10 and then divide by 3. 0.3 x 10 = 3 | 3 = 1 f-stop0.9 x 10 = 9 | 3 = 3 f-stops0.6 x 10 = 6 | 3 = 2 f-stops1.2 x 10 = 12 | 3 = 4 f-stops1.8 x 10 = 18 | 3 = 6 f-stops3.0 x 10 = 30 | 3 = 10 f-stops3.6 x 10 = 36 | 3 = 12 f-stops4.5 x 10 = 45 | 3 = 15 f-stops  

Haida Rear Lens Mist Black 1/4 Filter Type 1 The Haida Rear Lens Mist Black 1/4 Filter Type 1 is a professional diffusion filter that is mounted directly on the lens mount—i.e., on the rear. It creates a soft, cinematic look, reduces contrast in highlights, and gives portraits and video recordings a natural, soft glow. Ideal for cinematographers and photographers who want to give their images a high-quality, cinematic touch. The Haida Rear Lens Mist Black 1/4 Filter Type 1 is specially designed for lenses with a rear filter slot. Unlike classic screw-in filters, this filter is mounted directly on the bayonet mount, leaving the front of the lens free and making it compact to handle. The filter reduces harsh light reflections, creates smooth transitions in the highlights, and ensures even light distribution. At the same time, details and color reproduction remain natural. The result is a harmonious, cinematic image with controlled softness – perfect for video and portrait photography. Thanks to its high-quality optical glass coating, the filter is resistant to scratches, moisture, and dust. The nano multi-coating prevents color casts and guarantees neutral color characteristics. Special features and advantages Rear lens mount: Attached directly to the lens bayonet – ideal for lenses with integrated filter slots. Soft, cinematic look: Softens highlights without blurring the image. More natural skin tones: Perfect for portrait and beauty shots. No color cast: Color neutral thanks to high-quality multi-coating. Compact solution: No vignetting, no additional weight on the front of the lens. Robust construction: Scratch-resistant, water-repellent nano-coating. Compatibility The Haida Rear Lens Mist Black 1/4 Filter Type 1 is compatible with lenses that have a rear filter slot and support the Haida Type 1 Standard. Typically, this includes selected Sony, Canon, Nikon, and Sigma lenses with bayonet mount systems. These are the following lenses: Sigma 14-24mm F/2.8 DG DN Art lens for Sony E and Leica L                     Sony  FE 12-24mm F4 G Lens                                                                                  Sony  FE 12-24mm F2.8 GM lensNikon Z 14-24mm F2.8 S lens  Sony 14mm f/1.8 GM lens Sigma 14mm f/1.4 DG DN Art lens Leica L Sigma 14mm f/1.4 DG DN Art lens Sony E Leica Super-Vario-Elmarit-SL 14-24 f/2.8 ASPH   Technical details Filter type: Rear lens diffusion filter (Mist Black 1/4) Density: 1/4 stop – medium diffusion for a soft look Material: Optical glass with nano multi-coating Mount: Bayonet (Type 1) Dimensions: Specific to Haida Type 1 reverse lens system Color neutrality: No visible color cast Coating: Scratch-resistant, water- and oil-repellent Scope of delivery 1 × Haida rear lens Mist Black 1/4 filter type 1 1 × Protective box with padded insert 1 × Cleaning cloth

Haida rear filter adapter ring for selected Sigma Art lenses für Canon EF This rear filter adapter ring for selected Sigma Art lenses for Canon EF from Haida makes it possible to install selected Haida filters behind the rear element of a lens that does not have a conventional filter thread on the front. Simply remove the existing rear ring from the lens with the included mini-screwdriver, then install this precision-engineered aluminum adapter ring in its place. Then, the appropriate filters suitable for the adapter ring can be easily inserted as needed and removed when ready. Once this adapter ring is installed, there is no reason to remove it. It can stay in place indefinitely without affecting the function or performance of the lens.This adapter ring for Rücklinsenfilter, is suitable for the following lens:            Sigma 14mm F1.8 DG HSM Art Lens with Canon EF Mount Sigma 12-24mm F4.0 DG HSM Art lens with Canon EF mount Sigma 14-24mm F2.8 DG HSM Art lens with Canon EF mount Haida item number : HD4644Scope of delivery: 1 x adapter ring

Rear lens filter suitable for Sony FE 12-24 mm F4.0 G A rear lens filter is a gray filter (ND filter) that is inserted directly into the bayonet of the lens. This has two advantages, firstly, gray filters are relatively small and do not require much space, and secondly, such gray filters are much cheaper than a plug-in filter system, which is mounted in front of the lens. Ultra-wide-angle lenses with a pom-pom front lens or a permanently mounted sun visor then require filters with a width of 150 mm, and such plug-in filter systems are expensive and bulky to transport. Rear lens filters are therefore a good choice for long exposures in landscape or architectural photography. The ND 0.9, ND 1.2, ND 1.8 and ND 3.0 filters included in the set reduce exposure by 3, 4, 6 and 10 stops, respectively. The filters are made of optical glass that provides clarity and color fidelity. To prevent internal ghosting and reflections, each glass surface is coated with 10 layers of anti-reflective coating that better protects the filter substrate and helps it stay clean for a longer period of time. The nano-coating of these neutral density filters provides an additional layer that creates an improved beading effect when their surfaces come into contact with water or oil, allowing for more efficient cleaning. A plastic case is included for storage and transportation.This set is suitable for the following lenses: Sony FE 12-24 mm F4.0 G (SEL1224G) Included in the package is the following:1 x Rear lens filter filter ND 0.9 1 x rear lens filter ND 1.2 filter 1 x rear lens filter ND 1.8 filter 1 x rear lens filter ND 3.0 filter 1 x adapter suitable for Sony FE 12-24 mm F4.0 GTypical question related to this product: Can multiple filters be used at the same time? No, the holder is only designed for use with a single filter.

Rear lens filter suitable for the  Nikon Nikkor Z 14-24 mm f/2.8 S A rear lens filter is a gray filter (ND filter) that is inserted directly into the bayonet of the lens. This has two advantages, firstly, gray filters are relatively small and do not require much space, and secondly, such gray filters are much cheaper than a plug-in filter system, which is mounted in front of the lens. Ultra-wide-angle lenses with a pom-pom front lens or a permanently mounted sun visor then require filters with a width of 150 mm, and such plug-in filter systems are expensive and bulky to transport. Rear lens filters are therefore a good choice for long exposures in landscape or architectural photography. The ND 0.9, ND 1.2, ND 1.8 and ND 3.0 filters included in the set reduce exposure by 3, 4, 6 and 10 stops, respectively. The filters are made of optical glass, which provides clarity and color fidelity. To prevent internal ghosting and reflections, each glass surface is coated with 10 layers of anti-reflective coating that better protects the filter substrate and helps it stay clean for a longer period of time. The nano-coating of these neutral density filters provides an additional layer that creates an improved beading effect when their surfaces come into contact with water or oil, allowing for more efficient cleaning. A plastic case is included for storage and transportation.This set is suitable for the following lens: Nikon Nikkor Z 14-24 mm f/2.8 S  LensScope of delivery 1 x Rear lens filter filter ND 0.9 1 x rear lens filter ND 1.2 filter 1 x rear lens filter ND 1.8 filter 1 x rear lens filter ND 3.0 filter 1 x adapter suitable for Nikkor Z 14-24 mm f/2.8 S

Haida Video ND 1.8 Filter 4 x 5.65 V-ProThe 4 x 5.65" Video 1.8 filter from Hadia helps you control light. It reduces the exposure by 6 stops. This filter is designed for use with high-resolution video capture with CMOS and CCD sensors. The filter is made of optical glass for consistent clarity and is 4 x 5.65" (101.6 x 143.5 mm), so it fits well with lightweight or clip-on matte boxes.For technicians:Filter type: diffusionFilter Factor 1.8-Stop)Filter size: 4 "x5.65"Filter thickness: 4 mmFilter material: GlassHaida number: HD4742Scope of delivery:1 x Haida Video ND 1.8 Filter 4 x 5.65 V-Pro1 x Transport box with foam inlay

Haida Rücklinsenfilter adapter ring to Tamron SP 15-30 F2.8 This filter adapter ring for selected Tamron Haida lenses allows selected Haida filters to be mounted behind the rear element of a lens that does not have a conventional filter thread on the front. Simply remove the existing rear lens ring from the lens with the included mini-screwdriver and install this precision-engineered aluminum adapter ring in its place. The appropriate filters that fit on the adapter ring can then be easily inserted as needed and removed after use. Once the adapter ring is installed, there is no reason to remove it. It can remain in place indefinitely without affecting the function or performance of the lens.Suitable for the following lens:Tamron SP 15-30mm f/2.8 Di VC USD Lens with Canon EF Mount   Tamron SP 15-30mm f/2.8 Di VC USD G2 Lens Haida item number: HD4596Scope of delivery: 1 x adapter ring

Haida Back Lens Filter Adapter Ring to Sigma LensesHaida adapter ring for Sigma back lens filters, suitable for the following lenses:           Sigma 14-24mm F2.8 DG HSM Art lens for Canon EFSigma 12-24mm F4.0 DG HSM artificial lens for Canon EFHaida item number: HD4593Scope of delivery:1 x adapter ring

Haida 4 x 5.65 V-Pro Series MC IRND 0.9 Glass FilterThe 4 x 5.65" Video 0.9 filter from Hadia helps you control light. It reduces the exposure by 3 stops. This filter is designed for use with high-resolution video capture with CMOS and CCD sensors. The filter is made of optical glass for consistent clarity and is 4 x 5.65" (101.6 x 143.5 mm), so it fits well with lightweight or clip-on matte boxes.For technicians:Filter type: diffusionFilter Factor 0.9-Stop)Filter size: 4 "x5.65"Filter thickness: 4 mmFilter material: GlassHaida number: HD4739Scope of delivery:1 x Haida Video ND 0.9 Filter 4 x 5.65 V-Pro1 x Transport box with foam inlay

ND Filter plug-in filter ND 3.0 100 mm Haida   The rectangular Haida Gray Filter ND3.0 provides shutter speed extension during exposure in a shot by reducing the amount of incoming light on the sensor. The Neutral Density Filter 3.0 filter is a stronger gray filter - which is also called a Big Stopper - and is particularly suitable for long exposures of water in sunlight or for architectural photographers. A latitude of 10 stops makes the surface look smooth and flowing when taking long exposures of water. Architectural photographers use the ND filter for extended long exposures that make moving people, animals or cars in front of buildings, landmarks or in busy squares disappear from the picture. The ND3.0 gray filter is especially suitable for:Perfect for long exposures of water such as rivers, lakes, sea, streams, etc.Architectural photographers often use long time exposure to photograph places deserted, for example. With an ND3.0, you can achieve the following shutter speeds: At 1/2000sec, the shutter speed increases to 1/2sec.At 1/500sec, the shutter speed increases to 2sec.At 1/125sec, the shutter speed increases to 8sec. Multi-coated optical glass reduces reflectionsThe Haida gray filter is made of double-sided ground and polished glass, which stands for durability and highest optical quality. The two-millimeter-thin glass filter is free of color casts and offers high resolution. Its special multi-coating reduces the occurrence of reflections and makes the filter insensitive to scratches. Easy to mount with separately available adapter rings and filter holder.For mounting, screw the matching adapter ring from the Haida M10 filter system onto the lens and attach the filter holder to it. In this way, the graduated filter can be easily used with lenses from a focal length of approximately 16 millimeters on a full-frame camera (APS-C from approximately 11 millimeters).Up to three slots in the holder accommodate the desired creative filters. When inserting the ND filter, please make sure that the gray filter covers the lens properly so that no light enters sideways.   Metal box for safe storage and transportationThe filter comes with a metal box. This is perfect for transporting or storing the filter well protected. All advantages at a glance: Ideal for landscape photographyHigh-quality optical glass with nano coatingAbsolute color neutralityEasy insertion instead of screws (adjust the image section and insert the filter directly)Scratch-resistant multi-coating suppresses reflectionsRed Diamond version, break resistance significantly increasedRounded R5 edges for easier mountingPart of a complete filter system with optionally available adapter rings and filter holder Technical details: Material: glass, multi-coated, scratch resistant, splash water protectedCoating: Nano Pro coatedStrength: ND3.0 (10 stops)Dimensions (W x L x H): 100 x 100 x 2 mmWeight: 65 g Scope of delivery: 1 x Haida Gray Filter ND3.0 100 x 100 mm1 x transport box Gray filter calculationThe aperture reduction of ND filters is calculated as follows:The density of ND filters is usually given in steps of 0.3.To obtain the aperture reduction, first multiply the value by 10 and then divide by 3. 0.3 x 10 = 3 | 3 = 1 f-stop0.9 x 10 = 9 | 3 = 3 f-stops0.6 x 10 = 6 | 3 = 2 f-stops1.2 x 10 = 12 | 3 = 4 f-stops1.8 x 10 = 18 | 3 = 6 f-stops3.0 x 10 = 30 | 3 = 10 f-stops3.6 x 10 = 36 | 3 = 12 f-stops4.5 x 10 = 45 | 3 = 15 f-stops  

ND filter plug-in filter ND 3.0 150 mm Haida Latest version of Haida, increased breaking strength, rounded design R5 for easier installation.A neutral density gray filter reduces the amount of light that falls through the lens onto the image sensor. These filters are also called Neutral Density (ND) filters because light is swallowed but no color changes occur. Haida filters are made of high quality optical glass.High scratch resistance, low material fatigue and chamfered corners to prevent accidental breakage, let Haida filters provide years of best service.This filter fits Haida's 150mm filter system and almost all 150mm filter holders from other manufacturers.Thickness of the filter about 2.0mm  Scope of delivery: 1 x Haida Red Diamond 150x150 ND3.0 1000x ND filter made of glass. 1 x Filter BoxIn case you are wondering How does the aperture reduction of ND filters compute? It goes like this.The density of ND filters is usually given in increments of 0.3. To get the aperture reduction, first multiply the value by 10 and then divide it by 3.0.3 x 10 = 3  | 3 = 1  Aperture 0.6 x 10 = 6  | 3 = 2  aperture 1.2 x 10 = 12 | 3 = 4  apertures 3.0 x 10 = 30 | 3 = 10 f-stops 3.6 x 10 = 36 | 3 = 12 f-stops 4.5 x 10 = 45 | 3 = 15 f-stops

ND filter plug-in filter ND 0.9 150 mm Haida The latest plug-in filter from the house of Haida. Improved the breaking strength and the multiple coating, so that the dirt adheres less and more Bildschärfe is achieved. The round corners make it easier to mount.Haida filters are made of high quality optical glass.A neutral gray filter reduces the amount of light that falls through the lens onto the image sensor. These filters are also called neutral density (ND) filters, because light is swallowed, but do not cause color changes. The filter is also fondly called "Little Stopper".Haida filters are made of high quality optical glass.This filter fits Haida 150mm filter system and almost all 150mm filter holders from other manufacturers.Thickness of the filter about 2.0 mm  Scope of delivery: 1 x Haida Red Diamond 150x150 ND0.9 8x glass ND filter. 1 x Filter Box

Rear lens filter for various Canon EF lensesA rear lens filter is a gray filter (ND filter) that is inserted directly into the bayonet of the lens. This has two advantages, firstly, gray filters are relatively small and do not require much space, and secondly, such gray filters are much cheaper than a plug-in filter system, which is mounted in front of the lens. Ultra-wide-angle lenses with a pom-pom front lens or a permanently mounted sun visor then require filters with a width of 150 mm, and such plug-in filter systems are expensive and bulky to transport. Rear lens filters are therefore a good choice for long exposures in landscape or architectural photography. The ND 0.9, ND 1.2, ND 1.8 and ND 3.0 filters included in the set reduce exposure by 3, 4, 6 and 10 stops, respectively. The filters are made of optical glass, which provides clarity and color fidelity. To prevent internal ghosting and reflections, each glass surface is coated with 10 layers of anti-reflective coating that better protects the filter substrate and helps it stay clean for a longer period of time. The nano-coating of these neutral density filters provides an additional layer that creates an improved beading effect when their surfaces come into contact with water or oil, allowing for more efficient cleaning. A plastic case is included for storage and transportation.This set is suitable for the following lenses: Canon EF 8-15 mm f/4L Fisheye Canon EF 11-24 mm F4L USM Canon EF 14 mm f/2.8L USM Canon EF 15 mm f/2.8 Fisheye Canon EF 16-35 mm f/2.8L USM(Does not fit version II or III) Canon EF 17-35 mm f/2.8L USM Canon EF 17-40 mm f/4L USMScope of delivery1 x Rear lens filter filter ND 0.9 1 x rear lens filter ND 1.2 filter 1 x rear lens filter ND 1.8 filter 1 x rear lens filter ND 3.0 filter 1 x adapter für rear lens filter

Haida Rear Filter Adapter Ring to Sony FE 12-24mm F4 G Lens This filter adapter ring for the Sony FE 12-24mm 1:4 G lens allows selected Haida filters to be mounted behind the rear element of a lens that does not have a conventional filter thread on the front. Simply remove the lens' existing rear lens ring with the included mini-screwdriver and install this precision-engineered aluminum adapter ring in its place. The appropriate filters that fit on the adapter ring can then be easily inserted as needed and removed after use. Once the adapter ring is installed, there is no reason to remove it. It can remain in place indefinitely without affecting the function or performance of the lens.Haida adapter ring for Rücklinsenfilter, suitable for the following lens:            Sony FE 12-24mm F4 GHaida item number: HD4598Scope of delivery: 1 x Adapter ring fit Sony FE 12-24mm F4 G lens.

Rear lens filter to the Tamron SP 15-30mm f/2.8 Di VC USD lensA rear lens filter is a gray filter (ND filter) that is inserted directly into the bayonet of the lens. This has two advantages, firstly, gray filters are relatively small and do not require much space, and secondly, such gray filters are much cheaper than a plug-in filter system, which is mounted in front of the lens. Ultra-wide-angle lenses with a pom-pom front lens or a permanently mounted sun visor then require filters with a width of 150 mm, and such plug-in filter systems are expensive and bulky to transport. Rear lens filters are therefore a good choice for long exposures in landscape or architectural photography. The ND 0.9, ND 1.2, ND 1.8 and ND 3.0 filters included in the set reduce exposure by 3, 4, 6 and 10 stops, respectively. The filters are made of optical glass, which provides clarity and color fidelity. To prevent internal ghosting and reflections, each glass surface is coated with 10 layers of anti-reflective coating that better protects the filter substrate and helps it stay clean for a longer period of time. The nano-coating of these neutral density filters provides an additional layer that creates an improved beading effect when their surfaces come into contact with water or oil, allowing for more efficient cleaning. A plastic case is included for storage and transportation.This set is suitable for the following lenses: Tamron SP 15-30mm f/2.8 Di VC USD Lens with Canon EF Mount   Tamron SP 15-30mm f/2.8 Di VC USD G2 lens Scope of delivery1 x Rear lens filter filter ND 0.9 1 x rear lens filter ND 1.2 filter 1 x rear lens filter ND 1.8 filter 1 x rear lens filter ND 3.0 filter 1 x adapter to the Tamron SP 15-30mm f/2.8 Di VC USD lensTypical question related to this product: Can multiple filters be used at the same time? No, the holder is only designed for use with a single filter.

Rear lens filter für Sigma 14-24 mm and Sigma 14 mm A rear lens filter is a gray filter (ND filter) that is inserted directly into the bayonet of the lens. This has two advantages, firstly, gray filters are relatively small and do not require much space, and secondly, such gray filters are much cheaper than a plug-in filter system, which is mounted in front of the lens. Ultra-wide-angle lenses with a pom-pom front lens or a permanently mounted sun visor then require filters with a width of 150 mm, and such plug-in filter systems are expensive and bulky to transport. Rear lens filters are therefore a good choice for long exposures in landscape or architectural photography. The ND 0.9, ND 1.2, ND 1.8 and ND 3.0 filters included in the set reduce exposure by 3, 4, 6 and 10 stops, respectively. The filters are made of optical glass that provides clarity and color fidelity. To prevent internal ghosting and reflections, each glass surface is coated with 10 layers of anti-reflective coating that better protects the filter substrate and helps it stay clean for a longer period of time. The nano-coating of these neutral density filters provides an additional layer that creates an improved beading effect when their surfaces come into contact with water or oil, allowing for more efficient cleaning. A plastic case is included for storage and transportation. This set is suitable for the following lenses: Sigma 14-24 mm f/2.8 DG DN Art lens with Sony E-mount connector. Sigma 14-24 mm f/2.8 DG DN Art lens with Leica L mount Sigma 24 mm f/1.4 DG DN Art lens with Sony E-mount connection Sigma 14 mm f/1.4 DG DN Art lens with Leica L mount Sigma 14 mm f/1.4 DG DN Art lens with Sony E-mount connection Leica Super-Vario-Elmarit-SL 14-24 f/2.8 ASPH Scope of delivery 1 x Rear lens filter filter ND 0.9 1 x rear lens filter ND 1.2 filter 1 x rear lens filter ND 1.8 filter 1 x rear lens filter ND 3.0 filter   Typical question related to this product: Can multiple filters be used at the same time? No, the holder is only designed for use with a single filter.

Rear lens filter suitable for Sigma lenses with Canon EF mount. A rear lens filter is a gray filter (ND filter) that is inserted directly into the bayonet of the lens. This has two advantages, firstly, gray filters are relatively small and do not require much space, and secondly, such gray filters are much cheaper than a plug-in filter system, which is mounted in front of the lens. Ultra-wide-angle lenses with a pom-pom front lens or a permanently mounted sun visor then require filters with a width of 150 mm, and such plug-in filter systems are expensive and bulky to transport. Rear lens filters are therefore a good choice for long exposures in landscape or architectural photography. The ND 0.9, ND 1.2, ND 1.8 and ND 3.0 filters included in the set reduce exposure by 3, 4, 6 and 10 stops, respectively. The filters are made of optical glass, which provides clarity and color fidelity. To prevent internal ghosting and reflections, each glass surface is coated with 10 layers of anti-reflective coating that better protects the filter substrate and helps it stay clean for a longer period of time. The nano-coating of these neutral density filters provides an additional layer that creates an improved beading effect when their surfaces come into contact with water or oil, allowing for more efficient cleaning. A plastic case is included for storage and transportation.This set is suitable for the following lenses: Sigma 14-24 mm F2.8 DG HSM Art lens with Canon EF Sigma 12-24 mm F4.0 DG HSM Art lens with Canon EF Sigma 14 mm F1.8 DG HSM Art lens with Canon EFScope of delivery 1 x Rear lens filter filter ND 0.9 1 x Rear lens filter ND 1.2 filter 1 x rear lens filter ND 1.8 filter 1 x rear lens filter ND 3.0 filter 1 x Adapter to the lenses listed above.