Haida Rear Lens Filter Clear Night Typ I

Rear lens filter für Sigma 14-24 mm and Sigma 14 mm A rear lens filter is a gray filter (ND filter) that is inserted directly into the bayonet of the lens. This has two advantages, firstly, gray filters are relatively small and do not require much space, and secondly, such gray filters are much cheaper than a plug-in filter system, which is mounted in front of the lens. Ultra-wide-angle lenses with a pom-pom front lens or a permanently mounted sun visor then require filters with a width of 150 mm, and such plug-in filter systems are expensive and bulky to transport. Rear lens filters are therefore a good choice for long exposures in landscape or architectural photography. The ND 0.9, ND 1.2, ND 1.8 and ND 3.0 filters included in the set reduce exposure by 3, 4, 6 and 10 stops, respectively. The filters are made of optical glass that provides clarity and color fidelity. To prevent internal ghosting and reflections, each glass surface is coated with 10 layers of anti-reflective coating that better protects the filter substrate and helps it stay clean for a longer period of time. The nano-coating of these neutral density filters provides an additional layer that creates an improved beading effect when their surfaces come into contact with water or oil, allowing for more efficient cleaning. A plastic case is included for storage and transportation. This set is suitable for the following lenses: Sigma 14-24 mm f/2.8 DG DN Art lens with Sony E-mount connector. Sigma 14-24 mm f/2.8 DG DN Art lens with Leica L mount Sigma 24 mm f/1.4 DG DN Art lens with Sony E-mount connection Sigma 14 mm f/1.4 DG DN Art lens with Leica L mount Sigma 14 mm f/1.4 DG DN Art lens with Sony E-mount connection Leica Super-Vario-Elmarit-SL 14-24 f/2.8 ASPH Scope of delivery 1 x Rear lens filter filter ND 0.9 1 x rear lens filter ND 1.2 filter 1 x rear lens filter ND 1.8 filter 1 x rear lens filter ND 3.0 filter   Typical question related to this product: Can multiple filters be used at the same time? No, the holder is only designed for use with a single filter.

Haida Rücklinsen holder to Sony 14 mm f 1.8 GM This rear filter adapter ring for the Sony 14 mm f/1.8 GM lens from Haida allows selected Haida filters to be attached behind the rear element of a lens that does not have a conventional filter thread on the front. Simply remove the existing rear ring from the lens with the included mini-screwdriver, then install this precision-engineered aluminum adapter ring in its place. Then, the appropriate filters suitable for the adapter ring can be easily inserted as needed and removed when ready. Once the adapter ring is installed, there is no reason to remove it. It can stay in place indefinitely without affecting the function or performance of the lens.Lens Compatibility Sony 14mm f/1.8 GM Lens (SEL-14F18GM)Haida item number: HD4763Scope of delivery: 1 x Haida Rücklinsen holder to Sony 14 mm f 1.8 GM

Rear lens filter suitable for Sony FE 12-24 mm F2.8 GM A rear lens filter is a gray filter (ND filter) that is inserted directly into the bayonet of the lens. This has two advantages, firstly, gray filters are relatively small and do not require much space, and secondly, such gray filters are much cheaper than a plug-in filter system, which is mounted in front of the lens. Ultra-wide-angle lenses with a pom-pom front lens or a permanently mounted sun visor then require filters with a width of 150 mm, and such plug-in filter systems are expensive and bulky to transport. Rear lens filters are therefore a good choice for long exposures in landscape or architectural photography. The ND 0.9, ND 1.2, ND 1.8 and ND 3.0 filters included in the set reduce exposure by 3, 4, 6 and 10 stops, respectively. The filters are made of optical glass, which provides clarity and color fidelity. To prevent internal ghosting and reflections, each glass surface is coated with 10 layers of anti-reflective coating that better protects the filter substrate and helps it stay clean for a longer period of time. The nano-coating of these neutral density filters provides an additional layer that creates an improved beading effect when their surfaces come into contact with water or oil, allowing for more efficient cleaning. A plastic case is included for storage and transportation.This set is suitable for the following lens: Sony FE 12-24mm F2.8 GM Lens  (SEL-1224GM)Scope of delivery 1 x Rear lens filter filter ND 0.9 1 x Rear lens filter ND 1.2 filter 1 x rear lens filter ND 1.8 filter 1 x rear lens filter ND 3.0 filter 1 x adapter suitable for Sony FE 12-24 mm F2.8 GM

Rear lens filter suitable for the  Nikon Nikkor Z 14-24 mm f/2.8 S A rear lens filter is a gray filter (ND filter) that is inserted directly into the bayonet of the lens. This has two advantages, firstly, gray filters are relatively small and do not require much space, and secondly, such gray filters are much cheaper than a plug-in filter system, which is mounted in front of the lens. Ultra-wide-angle lenses with a pom-pom front lens or a permanently mounted sun visor then require filters with a width of 150 mm, and such plug-in filter systems are expensive and bulky to transport. Rear lens filters are therefore a good choice for long exposures in landscape or architectural photography. The ND 0.9, ND 1.2, ND 1.8 and ND 3.0 filters included in the set reduce exposure by 3, 4, 6 and 10 stops, respectively. The filters are made of optical glass, which provides clarity and color fidelity. To prevent internal ghosting and reflections, each glass surface is coated with 10 layers of anti-reflective coating that better protects the filter substrate and helps it stay clean for a longer period of time. The nano-coating of these neutral density filters provides an additional layer that creates an improved beading effect when their surfaces come into contact with water or oil, allowing for more efficient cleaning. A plastic case is included for storage and transportation.This set is suitable for the following lens: Nikon Nikkor Z 14-24 mm f/2.8 S  LensScope of delivery 1 x Rear lens filter filter ND 0.9 1 x rear lens filter ND 1.2 filter 1 x rear lens filter ND 1.8 filter 1 x rear lens filter ND 3.0 filter 1 x adapter suitable for Nikkor Z 14-24 mm f/2.8 S

Rear lens filter suitable for Sony FE 12-24 mm F4.0 G A rear lens filter is a gray filter (ND filter) that is inserted directly into the bayonet of the lens. This has two advantages, firstly, gray filters are relatively small and do not require much space, and secondly, such gray filters are much cheaper than a plug-in filter system, which is mounted in front of the lens. Ultra-wide-angle lenses with a pom-pom front lens or a permanently mounted sun visor then require filters with a width of 150 mm, and such plug-in filter systems are expensive and bulky to transport. Rear lens filters are therefore a good choice for long exposures in landscape or architectural photography. The ND 0.9, ND 1.2, ND 1.8 and ND 3.0 filters included in the set reduce exposure by 3, 4, 6 and 10 stops, respectively. The filters are made of optical glass that provides clarity and color fidelity. To prevent internal ghosting and reflections, each glass surface is coated with 10 layers of anti-reflective coating that better protects the filter substrate and helps it stay clean for a longer period of time. The nano-coating of these neutral density filters provides an additional layer that creates an improved beading effect when their surfaces come into contact with water or oil, allowing for more efficient cleaning. A plastic case is included for storage and transportation.This set is suitable for the following lenses: Sony FE 12-24 mm F4.0 G (SEL1224G) Included in the package is the following:1 x Rear lens filter filter ND 0.9 1 x rear lens filter ND 1.2 filter 1 x rear lens filter ND 1.8 filter 1 x rear lens filter ND 3.0 filter 1 x adapter suitable for Sony FE 12-24 mm F4.0 GTypical question related to this product: Can multiple filters be used at the same time? No, the holder is only designed for use with a single filter.

Haida Rear Lens Filter Set for Sony FE 14mm f/1.8 GM The Haida Rear Lens Filter Set for Sony FE 14mm f/1.8 GM was developed specifically for demanding landscape and architectural photographers. It allows you to use high-quality filters directly on the rear lens of the lens, expanding your creative possibilities for long-exposure, nature, and wide-angle photography. This filter set is perfectly matched to the Sony FE 14mm f/1.8 GM, a lens that cannot be used with conventional front filters due to its design. The filters are mounted precisely on the rear lens and do not negatively affect image quality. High-quality optical glass ensures maximum sharpness, neutral color reproduction, and minimal reflections. The precise workmanship guarantees a secure fit and easy handling in everyday photography. Special features and advantages Specially developed rear lens solution for ultra-wide angles No vignetting despite extreme image angles Ideal for long exposures and creative effects Compact, lightweight, and ideal for outdoor photography High scratch resistance and durable coating Compared to universal filter systems, this set offers a perfectly integrated solution without additional holders or large filter adapters. Suitable for the following lens: Sony FE 14 mm f/1.8 GM lens (SEL14F18GM) Technical details Filter type: Rear lens filter Material: High-quality optical glass Coating: Multi-coated Mounting: Rear lens Weight: approx. 20 g (set) Scope of delivery: 1 x ND 0.9 filter1 x ND 1.2 filter1 x ND 1.8 filter1 x ND 3.0 filter1 x adapter suitable for Sony FE 14 mm f. 1.8 GM lens

Haida Rücklinsen holder to Sony  FE 12-24mm F28 GM This rear filter adapter ring for Haida's Sony FE 12-24mm f/2.8 GM lens allows you to install select Haida filters behind the rear element of a lens that does not have a conventional filter thread on the front. Simply remove the existing rear ring from the lens with the included mini-screwdriver, then install this precision-engineered aluminum adapter ring in its place. Then, the appropriate filters suitable for the adapter ring can be easily inserted as needed and removed when ready. Once this adapter ring is installed, there is no reason to remove it. It can stay in place indefinitely without affecting the function or performance of the lens. This adapter ring for Rücklinsenfilter, is suitable für the following lenses:         Sony  FE 12-24mm F2.8 GM Sony 14mm f/1.8 GM LensHaida item number: HD4642Scope of delivery: 1 x Adapter ring