Godox AK-B01 Handgrip for ML60IIBi

JJC DB-NPF7K2 USB Dual Battery Charger and Battery Pack   With the USB Dual Battery Charger you can charge 2 batteries at the same time. There are two power supply modes available, once via the existing USB cable you can charge your battery with a power supply, laptop or car charger. The USB-C input also allows quick charging in QC 3.0 mode.The corresponding power supply and cable must be purchased separately. The battery type NP-F770 fits and works perfectly with the corresponding camcorders or LED lights. The JJC Li-ion battery is made from a high quality battery cell. Technical data: USB Dual Battery Chargerfor the following batteries Sony NP-F550/F750/F970/FM50/FM500H2 power supply modes available: via USB input or USB-C inputintegrated USB cable for easy transport (cable length approx. 10cm)Supports QC 3.0 fast-charging technology when input via USB-C portAllows simultaneous charging of 2 batteriesLED display for battery charge status Standard Charge 700mA±50mA *1 600mA±50mA *2 QC 3.0 Fast charging 1200mA±50mA *11000mA±50mA *2 Dimensions: 80 x 58 x 25 mm batteries: Li-Ion 7,4V 4400mAh 32,6Wh Scope of delivery:1 x charger2 x battery JJC B-NPF770

Finally a continuous LED light that doesn't eat half your camera bag. The Godox ML60IIBi runs at a solid 60 watts, flips between warm studio light and daylight, and fits in any kit–even as a clip-on module behind the lens. 60 Watt LED continuous light, Bi-Color (2800 to 6500 K) Compact and lightweight – no space hog in your kit CRI/TLCI over 95 – accurate colour, no colour grading needed Tilt joint and mounting for tripod or camera Powered via USB-C or optional battery pack (NP-F series) Real light that goes everywhere 60 watts that work The ML60IIBi is not a toy fill light. At 60 watts it lights a face at distance, plays well with a key light, or shines through a window–whatever you need. And it stays rock solid, never flickers. Pick your colour, not your kit Warm for portraits, daylight for outdoors, anything in between at a dial–all without two fixtures and without busting your bag. One light, one colour wheel. Colour is right from the start Instead of grading everything in Davinci later: the ML60IIBi ships calibrated to CRI/TLCI over 95. Your grade lives in camera. How this works in practice Portrait without the rig Drop the ML60IIBi in a tabletop stand, set the colour to your mood, and done–no mixer, no cable mess, no second PA. Shoot in an hour, colour locked in the edit. Fill light on every job When the sun is wrong or the window too small: slip the ML60IIBi into a stand, a ring-flash adapter, or a camera clip–and the colour matches your main light instantly. What to know before you order 60 watts works for – Solid key or fill light at close to mid range, pocket light for video, clip-on module for run-and-gun–not as a key light for high-speed work at f/1.4 from 30 feet away. For that, reach for strobes. Bi-Color means no RGB You dial between warm and daylight–everything in between is a blend. No colour effects like the ML100R. Need neon blue or green haze, that's a different light. No power supply in the box The head runs off USB-C–any modern power bank or laptop charger works. NP-F batteries slot on optionally (just clip, no fuss). Technical specs at a glance Output: 60 Watt LED Colour temperature: 2800 to 6500 K (Bi-Color) Colour accuracy: CRI/TLCI over 95 Power: USB-C or NP-F battery (optional) Mount: tilt joint, hot shoe, tripod thread Size: compact, lightweight, bag-friendly In the box 1 x Godox ML60IIBi LED continuous light Mounting hardware (joint, shoe) Optional: Diffuser / reflector (softbox function) NP-F battery and holder Tripod (not included)