SmallRig Cage Kit for Nikon Z 8 3941

Flash and wireless remote shutter Yongnuo RF-603 II like Nikon MC-30 or MC-36   16-channel radio trigger for cameras and flashes - 100m range The RF-603 is a transceiver system, which means that both devices are transmitter and receiver at the same time and the function is recognized depending on the application. Both transceivers offer the function to trigger flashes unleashed. They can also be used as cable and radio remote triggers for cameras. With these possibilities the RF-603 offers an enormous range of functions at a low price.Flash Trigger The RF-603 enables wireless, unleashed triggering of clip-on and studio flashes even from a great distance. For attachable flashes, the transceivers have a flash shoe to insert the flash. The second transceiver is pushed into the hot shoe. On the transceiver plugged on the camera another flash can be plugged on and triggered. (Studio) flash units with 6.3mm or 3.5mm jack socket can be connected to the transceiver with an optionally available trigger cable.Camera shutter release With the RF-603 wireless shutter release and the supplied release cable, cameras can be released even from a great distance. To do this, connect one of the transceivers to the camera with the cable while releasing the camera with the release button of the second one. Alternatively, the transceiver connected by cable can be used directly as a remote cable release. Under optimal conditions the shutter release has a range of up to 100m. The release button has two pressure points. At the first pressure point the camera focuses, at the second one it releases. Long time exposures and serial pictures are possible. However, the corresponding settings on the camera must be made for this. On cameras where the video function is controlled by the photo release button, video recordings can also be started and stopped with this release.Synchronous remote triggering of camera and flash To trigger the camera and the flash synchronously, you plug the transceiver, which is connected to the camera via cable, onto the camera's hot shoe and equip it with a flash on top. This set can be triggered via the second transceiver. With an optionally available transceiver, both the camera and the unleashed flash can be triggered synchronously. Technical details: Type: FSK 2.4GHz radio triggerRange: approx. 100mSynchronization time: 1/200sek.Channels: 16Power supply: 2x AAA eachStandby time: min. 45hMax. ignition voltage: 30VWeight (single transceiver): approx. 36gDimensions: approx. 3.7 x 3.0 x 8.2cm Scope of delivery: 2 RF-603N II transceiversRelease cable N3 (MC-30 / MC-36) for camera Compatible with the following cameras: (list is not exhaustive) • Nikon Z9 • Nikon Z8 • Nikon Z6 • Nikon D850 • Nikon D810 • Nikon D810A • Nikon D6 • Nikon D5 • Nikon D4 • Nikon D4S • Nikon D3 • Nikon D3S • Nikon D3X • Nikon D800 • Nikon D800E • Nikon D700 • Nikon D500 • Nikon D300 • Nikon D200           Note: The RF-603 wireless trigger does not transmit TTL data. All camera and flash settings must be made manually.With a suitable flash adapter, the RF-603 can also be used with most cameras of other brands.The RF-603 is not compatible with the RF-602.  

Battery Nikon EN-EL15C with USB-C input from Patona This battery is identical in construction to the Nikon EN-EL15C, with one small difference, it has a USB-C connector. The EN-EL15C battery can be charged directly via this port. There is no need for a special charger anymore. Simply connect it to an appropriate fast charging adapter and the battery will be charged. Technical data: 2250 mAh / 15.8Wh7.0 VoltUSB-C input max. 1.2 A (Higher input currents are automatically reduced via IC control of the battery)Li-Ion This battery is used in the following models: Nikon D500Nikon D610 Nikon D750 Nikon D800 Nikon D800E Nikon D810 Nikon D810A Nikon D850Nikon D7000Nikon D7100Nikon D7200Nikon Z5Nikon Z6Nikon Z7Nikon Z6 IINikon Z7 II Note: Does not work with the Nikon ZR RED / SKU: VOA180AE   Name of the compatible original batteries: Nikon EN-EL15C, VFB12802 Scope of delivery: 1 x Patona battery like Nikon EN-EL15C. Note: Due to continuous efforts to improve the product and product features, both pictures and specifications may vary slightly from the delivered product.

Replacement/supplement cable for various JJC productsVarious JJC products offer the advantage of replacing the camera release cable with a simple plug connection. So you can use a JJC shutter release e.g. for Nikon and Canon EOS by simply purchasing a suitable cable for your camera.The cable is also suitable for many releases from other manufacturers with 2.5mm jack socket.Technical data: Spiral cable Max. Length: 90cmOriginal Connection Name: Nikon-MC30Scope of delivery: 1x JJC camera cable Cable-BCompatible with the following cameras: Nikon Z9, D850, D810A, D810, D800, D800E, D700, D500, D300, D300s, D200, D100 (battery grip required), D5, D4S, D4, D3S, D3X, D3, D2X, D2Xs, D2H, D2Hs, D1X, D1H, D1Nikon F6, F5, F90X, F100, MC-30Fuji S3 Pro, S5 Pro, Kodak DCS Pro

The advantage of manual release is that you can no longer shake or accidentally move the image section. The cable release can also be used manually. The shutter release can be locked for manual long time exposure, the built-in stopwatch then counts down until the exposure is finished. Video recording can also be started and stopped. More features: The signal tones can be switched off, the display is illuminated and a key lock can be set. Mirror lock up is not possible with this cable release. Delayed triggering Long time exposures (the exposure time on the camera may have to be set to "BULB") Interval and continuous shooting Relevant notes: The camera focuses automatically before the shutter release if the release is programmed. The exposure time counts towards the interval. If you want an exposure time of 8 seconds, for example, the interval must be 10 seconds. So that the timer does not "hang around" in the air, there is this practical attachment: Timer Tripod Mounting RCH-TM Compatible with:   • Nikon Z9 • Nikon Z8 • Nikon Z6 • Nikon D850 • Nikon D810 • Nikon D810A • Nikon D6 • Nikon D5 • Nikon D4 • Nikon D4S • Nikon D3 • Nikon D3S • Nikon D3X • Nikon D800 • Nikon D800E • Nikon D700 • Nikon D500 • Nikon D300 • Nikon D200           You may need to set the USB function of the camera to "Auto".   Technical details: Delayed shutter release (Delay): 0s - 99h 59min 59s Long time exposure (Bulb): 0s to 99h 59min 59s* Interval: 1s - 99h 59min 59s Continuous shooting: 1-399 or infinite dimensions: 11 x 4,5 x 2,2cm weight: 72g Power supply: 2 micro cells (AAA) Cable length: approx. 90cm Operating temperature: -20 to +50°C   Scope of delivery: 1x Timer cable release 2x AAA batteries 1x manual in English and German

Display protector coated for Nikon Z 8With this LCD protector you get a screen protector that meets the highest demands and scores with the latest technology. Since it is made of 0.3 mm thick glass, it can - unlike conventional films - not throw bubbles. Thus, the brilliance of your display is preserved and it is optimally protected. You can remove the screen protector without leaving any residue, because it can be applied with the principle of auto-absorption. The functionality of any existing touchscreen is also retained. Once you have mounted the screen protector, it is no longer necessary to fold the monitor. So you no longer have to worry about scratching the display if you forget to fold it in.The advantages at a glance:Perfect protection without bubblesSelf-adhesive & removable without leaving any residueREAL GLASS - clear view and color fastnessOnly 0.3 mm thickHardened tempered glass6-layer principle Impact resistantDust repellentAge-resistantFor technicians:Japanese optical glassHardness of the glass: 8HLight transmission: > 90Absorption capacity: 130g/ cm² Resistance of the glass: 12 kg/ cm²CompatibilityNikon Z 8Scope of delivery1x screen protector for Nikon Z 8The pictures are only sample pictures, delivered item may differ from the picture.[youtube;xgdX7iKheVQ;560;315]

Protect battery for Nikon EN-EL15c from Patona The Protect battery for Nikon EN-EL15c from Patona is the perfect choice for demanding photographers who expect maximum reliability and longevity. This premium replacement battery has been specially developed for Nikon cameras to ensure optimum performance and longer operating time. With a capacity of 2250 mAh, it offers impressive battery life so you can concentrate on your shots without having to constantly check the charge level. Thanks to the modern protection technology, the battery is protected against overcharging, deep discharge and short circuits, which provides additional safety and extends the battery's service life. The Patona Protect battery is equipped with high-quality cells that are not only powerful but also particularly durable. Compatible with a wide range of Nikon camera models, such as the Nikon Z series and the D7500, this battery is a reliable choice for photographers traveling, shooting or working in hectic environments. In addition, the battery impresses with its easy handling and perfect fit in your camera. With the Protect battery from Patona, you are always ready for the next perfect shot. Technical data of the Protect battery for Nikon EN-EL15c Voltage: 7.2Volt Capacity: 2250mAh / 16.2Wh Cell type: Li-Ion The battery is used in the following cameras: • Nikon D500 • Nikon D610 • Nikon D750 • Nikon D800 • Nikon D800E • Nikon D810 • Nikon D810A • Nikon D850 • Nikon D7000 • Nikon D7100 • Nikon D7200 • Nikon Z5 • Nikon Z6 • Nikon Z6 II • Nikon Z7 • Nikon Z7 II           Note: Does not work with the Nikon ZR RED / SKU: VOA180AE Designation of original battery: EN-EL15C, VFB12802  Scope of delivery: 1x camera battery from Patona like Nikon EN-EL15c

Remote release MA-B like Nikon MC-30 MC-36 MC-30A from JJC The Nikon MC-30 MC-36 MC-30A compatible remote shutter release is the perfect tool for photographers who want to maximise their creative possibilities. This high-quality accessory allows you to trigger your camera remotely, giving you a whole new dimension of control and precision. From impressive long exposures at night to mesmerising macro shots and perfect self-portraits, the Nikon MC-30 MC-36 MC-30A remote trigger gives you the freedom you need. With a cable length of 80 cm, you have enough leeway to trigger your camera from different angles and distances without touching it directly. This minimises camera shake and ensures razor-sharp images. The ergonomic design of the remote trigger sits comfortably in the hand and makes operation child's play. Thanks to the robust design and high-quality materials, you will enjoy using this tool for a long time, even with intensive use. The hard-wearing cable can also withstand the challenges of outdoor use and travelling. The Nikon MC-30 MC-36 MC-30A remote control has been specially developed for Nikon cameras with a 10-pin connector and guarantees smooth compatibility. Whether you are an experienced professional or a passionate amateur photographer, this remote release will help you take your photography skills to the next level. In addition, the Nikon MC-30 MC-36 MC-30A remote shutter release offers a semi-automatic shutter release function. You can half-press the trigger to focus before you take the picture - an important function that helps you to take precise and sharp pictures. With the Nikon MC-30 MC-36 MC-30A remote shutter release, you not only have a practical accessory in your hand, but also a tool that takes your creativity and precision to a new level. Technical details: Cable length: approx. 90cm Dimensions: approx. 105x34x23 mm Weight: approx. 45g Compatible with the following cameras: (list is not exhaustive) • Nikon Z9 • Nikon Z8 • Nikon Z6 • Nikon D850 • Nikon D810 • Nikon D810A • Nikon D6 • Nikon D5 • Nikon D4 • Nikon D4S • Nikon D3 • Nikon D3S • Nikon D3X • Nikon D800 • Nikon D800E • Nikon D700 • Nikon D500 • Nikon D300 • Nikon D200           Scope of delivery: 1x remote shutter release MA-B like Nikon MC-30 MC-36 MC-30A from JJC