SpiderPro Tripod Carrier

Camera Holder Dual SpiderLight   The SpiderLight camera carrying system is a sophisticated transport solution for ambitious hobby photographers or professional photographers. The camera is carried comfortably on the hip, always ready to hand for the right moment. This set consists of 1 SpiderLight Belt with protective pad, 1 SpiderLight Holster Pad, 2 SpiderLight Holster, 2 SpiderLight Plates and 2 SpiderLight Pins.   With this dual system you can comfortably carry 2 cameras on your hip while your hands are free and there is no annoying belt around your neck.The SpiderLight Camera Holsters are made of stainless steel and hardened aluminum and are attached to the SpiderLight Belt or Holster Pad. With the pin on the camera pad the cameras are hooked into the holsters. So the cameras are located at your hip and you have your hands free and no annoying belt around your neck.The holsters are equipped with a two-stage safety lock. In the locked position the camera can only be released again when you operate the lever. In the open position, the camera can be removed at any time with one hand movement. The holster pads on the belt act as a buffer and absorb movements and shocks. They also protect the camera from scratches. The belt has a safety buckle and can only be opened if 3 pressure points are pressed simultaneously.   Product features:   For the use of 2 mirrorless or small DSLR camerasStainless steel holster with safety leverCamera plates made of hardened aluminumSturdy and padded holster pads made of robust material Suitable for mirrorless or small cameras.   Technical data: Total weight: 460 gCamera plate connections: 1/4-inch camera screw, 1/4-inch female threadMaterial: stainless steel, aluminium, nylonColor: black, silver   Scope of delivery:   1x SpiderLight Belt hip belt with mounted holster1x SpiderLight Pad with mounted holster2x SpiderLight camera plates with pin2x Allen wrench

Camera support system V2 from Spiderlight This carrying system is perfect for your heavy cameras, which you can mount and dismount in one easy step. Comfortable, safe and practical. In version 2 with many improvements that make working with the carrying system even more comfortable. The Spider Pro Camera Holster is a professional hip carrying system especially designed for heavy DSLR cameras with mounted flash and zoom lens. This system allows the camera to be carried safely, hands-free and above all back-friendly in a fixed position directly on the hip. Remove the camera from the Spider Pro holster, take a picture and then snap the camera back into the holster. This secure and reliable DeepL access to the camera makes the Spider Pro holster a must-have for many wedding, concert, sports and studio photographers. The Spider Light Camera Holster is compatible with all Spider Holster accessories. The Spider Pro memory card pouch, the lens cases and the Spider Monkey Clips can be attached to the hip strap. This is new in version 2: Camera plate, pin, expandability for a second camera In the 2nd version, the Spider carrying system has been optimised at various points to further improve the carrying comfort and the expandability for a second camera. The camera plate in version 2 has a modified geometry, so that the camera is fixed in a comfortable position in the holster on the left as well as on the right side. An anti-slip coating on the camera plate prevents unintentional loosening of the plate.  One of the most important innovations of the plate concerns the stainless steel pin: instead of a firmly screwed and glued pin, the Anti-Twist-Pin is now used. This pin is not screwed into the camera plate itself, but is instead fixed with an additional hexagon socket screw on the back of the pin. A groove at the base of the pin ensures that it cannot twist in the camera plate.  Another decisive innovation of the Spider Pro Camera Holster V2: The extension for a second camera can now be attached completely without tools. Product features: Quick and intuitive access to the cameraUnique in terms of operation, safety and durabilityOptimum weight distribution on the hipsSturdy hip belt with safety buckleSecurity lock against falling out and theft   For the technicians: Total weight: 465 glength hip belt: 71 - 127 cm (total length incl. holster 153cm)Camera plate connections: 1/4-inch camera screw, 2 x 1/4-inch female threadLoad capacity: recommended up to approx. 5 kg camera weightMaterial: aluminium, stainless steel, nylonColour: black, silver Scope of delivery: 1 Spider Pro v2 holster, mounted on the Spider Pro Belt hip belt1 Spider Pro v2 camera plate with anti-twist pin and Allen key

Camera support system for two SpiderPro cameras This carrying system is perfect for your heavy cameras, which you can mount and dismount in one easy step. Comfortable, safe and practical. In version 2 with many improvements that make working with the carrying system even more comfortable. The Spider Pro Camera Holster is a professional hip carrying system especially designed for heavy DSLR cameras with mounted flash and zoom lens. This system allows you to carry your camera safely, hands-free and above all back-friendly in a fixed position directly on your hips. Remove the camera from the Spider Pro holster, take a picture and then snap the camera directly back into the holster. This secure and reliable DeepL access to the camera makes the Spider Pro holster a must-have for wedding, concert, sports and studio photographers. Additional Lens Collar Plate for the lens clip. In addition to two camera plates for the camera body, the Spider Pro v2 Dual Camera System includes an additional Lens Collar Plate to accommodate a camera with a heavy . Zoom lens directly with the tripod clamp on the Spider holster. This is new in version 2:Camera plate, pin, expandability for second camera. In the 2nd version, the Spider carrying system has been optimised at various points to further improve the carrying comfort and the expandability for a second camera. The camera plate in version 2 has a modified geometry, so that the camera is fixed in a comfortable position in the holster on the left as well as on the right side. An anti-slip coating on the camera plate prevents unintentional loosening of the plate.  One of the most important innovations of the plate concerns the stainless steel pin: instead of a firmly screwed and glued pin, the Anti-Twist-Pin is now used. This pin is not screwed into the camera plate itself, but is instead fixed with an additional hexagon socket screw on the back of the pin. A groove at the base of the pin ensures that it cannot twist in the camera plate. Another decisive innovation of the Spider Pro Camera Holster V2: The extension for a second camera can now be attached completely without tools. Security lock against falling out and theftWith this Spider Pro system, your camera is secured with a safety lock against accidental falling out and theft. The safety lock is opened and closed with a lateral unlocking lever. When the unlocking lever is in the lower position, the lock is closed. The camera locks securely in the holster, but can only be removed if the release lever is pressed simultaneously. If the lever is in the upper position, the safety lock is deactivated. Your camera can be removed with one hand for quicker access. All advantages at a glance: Quick and intuitive access to camerasUnique in terms of operation, safety and durabilityOptimum weight distribution on the hipsSturdy hip belt with safety buckleSecurity lock against falling out and theft   For the technicians: Total weight: 964 glength hip belt: 71 - 127 cmCamera plate connections: 1/4-inch camera screw, 2 x 1/4-inch female threadLoad capacity: recommended up to approx. 5 kg camera weight per holsterMaterial: aluminium, stainless steel, nylonColour: black, silver Scope of delivery: 1x Spider Pro v2 Holster, mounted on the Spider Pro Belt hip belt1x Spider Pro v2 Holster, mounted on the Spider Pro Pad2x Spider Pro v2 camera plates with anti-twist pin and Allen key1x Spider Lens Collar Plate with Anti-Twist Pin and Allen Key