Ordered by 2pm, delivered the next day
Guaranteed product availability
Dispatch or collection

Solar Filter with 95mm from Haida

CHF 129.00*

Temporarily Out of Stock

Diameter
Enter your email in the field below and we will notify you when the product is back in stock.
Product number: HD4782-95
Our benefits
  • own warehouse
  • fast shipping
  • shipping with Swiss Post
  • pick-up after order possible
Our payment methods:

Haida Solar Screw Filter 95 mm Diameter

The Haida Solar Filter 95 mm with a neutral density of 6.0 produces images with a neutral hue and no color cast or loss of sharpness. The 20-step exposure reduction, built-in infrared blocking, and 6.0 density block invisible radiation. This is outside the visual spectrum that can be detected by the image sensors. This can affect the capture of clear images.
This filter has the effect of darkening the entire image, which makes it particularly suitable for photographing the sun and solar eclipses. With this filter, you can take photos with a larger aperture or slower shutter speed than normally required. This is a photo-only filter and is not suitable for direct naked-eye observation of the sun.
Warning: Under no circumstances should these filters be used to view a solar eclipse with the naked eye. These products are intended for on-camera use only. These filters do not provide the same level of optical protection as eclipse glasses, and using these filters to look directly at the sun before, during, or after an eclipse could permanently damage your eyesight.

Haida and Fotichaestli will not be liable for any costs, expenses or medical claims related to damage to your eyesight resulting from improper use of these filters.

Due to the extremely long exposure times that these filters allow, there is a great risk that light will penetrate through the camera body and be reflected in your image. Therefore, when using a camera with an optical viewfinder, it is imperative to darken the viewfinder. This can be done with a cloth or with a tape that does not stick too well.
Haida and Fotichaestli is not liable for any damage caused by exposing the sensor of your camera to direct sunlight with or without our filters.

Use of this filter is at your own risk.

All advantages at a glance:

For slower shutter speeds when taking photos 
High quality optical Nano Pro glass
Scratch resistant and water repellent
No color cast, high sharpness
Ultra Slim for no vignetting
Front cap mountable
Multiple filters can be combined thanks to front thread

For the technicians:

Material: multi-coated optical Nano Pro glass
Protection against: splash water, dirt, dust, oil, scratches etc.
Extension factor: 6.0 / 1'000'000x / 20 f-stops
Filter size: 95 mm
Height: 3 mm
Ultra Slim mount: Slim design to prevent vignetting
Front cap mountable: Yes, see note
Front thread available: Same size as the connection thread
Filters can be stacked together (Note: the more filters on top of each other, the more vignetting will result)

Designation by Haida: NanoPro One Million X Edition

Scope of delivery:

1 x Haida Slim Gray Filter ND 6.0 (1'000'000x) Ø 95 mm
1 x plastic transport box

Note: Due to the slim design, the lens cap does not sit as snugly as it would without the filter and can therefore fall off more quickly.

Properties "Solar Filter with 95mm from Haida"
Diameter: 95mm
Manufacturer "Haida Filter"

The manufacturer Haida specializes in the production of high quality filters for various uses in photography. Haida filters are all made of optical glass. Haida produces filter holders as well as screw filters. The filter holders for plug-in filters are available in the width of 100 mm and 150 mm in our assortment. There are also matching Haida adapter rings in different sizes. Of course, Haid also manufactures ND and GND filters in various dimensions. The Haida ND filters are mainly used in landscape photography. When it comes to coating, the Haida company uses the NanoPro MC designation for multi-coated surfaces, with the NanoPro series being the most current version. Haida systems are available for all sizes of lenses from different manufacturers. The kit Haida M10 II system for 100 mm should not be missing on any photographer's wish list. Haida filters can be used especially well for shooting with water. Haida products do not need to be afraid of comparison with other products such as those from Lee. The ND or gray filters are available in different strengths. So that not too much time is lost in post-processing, the filters from Haid are color-neutral. With the Haida M10 series, you can make perfect long exposures. The corresponding 100 mm graduated filters can be mounted high or low in the filter holder. For ultra-wide angles, Haida also has a corresponding solution in its range, namely the M15 system. With a width of 150 mm, these filters cover a wider angle of view compared to the 100 mm. If such an ultra-wide angle is on your wish list, please be sure to note the Haida M15, there are various adapters for the most diverse combinations. Haida also has rear lens filters, these mount in the lens bayonet and are available in various strengths. Simply put, you can find the right filter for every application in Haida's range. Whether these are then used in the city or in the countryside, it does not matter. The products are also accompanied by brochures or manuals in English that give an overview of the entire range. 

 

Related links of the manufacturer

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Related products

Step Up Ring 86mm-95mm
Step Up Ring 86mm-95mm
Kiwifotos Step-Up Ring 86-95mm  The Kiwifotos Step-Up Ring 86-95mm allows you to combine lenses with an 86mm filter thread with larger 95mm filters. This allows you to continue using your existing filters and saves you from having to buy multiple sizes. Ideal for ambitious amateur photographers and professionals who want to work flexibly. The step-up ring is made of precisely machined, anodized aluminum. It is robust, lightweight, and ensures a secure, play-free connection between the lens and filter. Thanks to its precise threading, the adapter can be easily mounted and removed. Special features and advantages Reduces costs through multiple use of filters High-quality metal design Precisely cut internal and external threads Slim design to minimize vignetting 86mm filter thread, compatible with models from: DSLR cameras System cameras Compact cameras with filter thread Technical details Internal thread: 86 mm External thread: 95 mm Material: Anodized aluminum Color: Matte black Design: Ultra slim Weight: approx. 10 g Scope of delivery 1x Kiwifotos Step-Up Ring 86-95 mm    

CHF 18.00*
Temporarily Out of Stock
Step Up Ring 72mm-95mm
Step Up Ring 72mm-95mm
Kiwifotos Step-Up Ring 72-95mm  The Kiwifotos Step-Up Ring 72-95mm allows you to combine lenses with a 72mm filter thread with larger 95mm filters. This allows you to continue using your existing filters and saves you from having to buy multiple sizes. Ideal for ambitious amateur photographers and professionals who want to work flexibly. The step-up ring is made of precisely machined, anodized aluminum. It is robust, lightweight, and ensures a secure, play-free connection between the lens and filter. Thanks to its precise threading, the adapter can be easily mounted and removed. Special features and advantages Reduces costs through multiple use of filters High-quality metal design Precisely cut internal and external threads Slim design to minimize vignetting Suitable for all cameras and lenses with a 72mm filter thread, including models from: DSLR cameras System cameras Compact cameras with filter thread Technical details Internal thread: 72 mm External thread: 95 mm Material: Anodized aluminum Color: Matte black Design: Ultra slim Weight: approx. 5 g Scope of delivery 1x Kiwifotos Step-Up Ring 72-95mm

CHF 22.00*