Flash tubes for studio flashes from Jinbei and Godox

Flash tube for Jinbei Spark-400D   Technical data: Power: 400 watt seconds suitable for: Jinbei Spark-400D studio flash Scope of delivery: 1 x Jinbei 400Ws flash tube

Flash tube for Jinbei HD-600Technical data:Power: 600 watt secondssuitable for: all Jinbei HD-600 versions Scope of delivery:1 x Jinbei 600Ws flash tube

Flash Tube to Godox  QT600II and QT400II The smooth and quick replacement is done by pulling out the old and plugging in the new flash wheel respectively. Notes on the flash tube change To change the flash tube, turn off the flash, disconnect it from the power supply and wait until the protection bell and Röhre are cold. In any case, please use clean cotton gloves or microfiber cloth to change. Carefully pull off the protective bell. Unwind the twisted wire from the flash tube holder and carefully pull the bulb out of the unit. To insert a new flash tube, push off the legs of the replacement tube and carefully slide it into the final position. Then wrap the wire around the flash tube holder again and put the protective cover back on. Fits the following Godox Stutioblitzes:  Godox QT400II M Godox QT600II M Godox GT300 Godox GT400 Scope of delivery: 1 x Godox flash röhre 600 Ws to QT600IIM

Godox Glass lamp cover for AD300proReplacement protective glass for Godox AD300Pro flash. Only compatible with the AD300Pro from Godox.Scope of delivery:1x Godox AD300pro protective glass

This Jinbei flash tube replaces the flash tube at the Jinbei DM-6 studio flash units and restores their operational readiness! The problem-free and fast exchange takes place by pulling out the old or plugging in the new tube.Notes on changing the flash tubeTo change the flash tube, turn off the flash, disconnect it from the power supply, and wait until the tube is cold. Always use clean cotton gloves or a microfiber cloth to change the flash tube.Uncoil the twisted ignition wire from the flash tube holder and carefully pull the lamp out of the device. To insert a new flash tube, support the legs of the replacement tube and carefully slide it into the end position. Then rewind the ignition wire around the flash tube holder.Technical Details:Compatible with: Jinbei DM-6 studio flashScope of delivery:1 x Jinbei 550 Ws flash tube for DM-6 studio flash

Modeling light replacement lamp for Jinbei MSN II studio flashes.Technical data:300 watts230 Voltfits Jinbei MSN II and Pilot series Scope of delivery:1 x Jinbei 300W Modeling Lamp / spare light for Jinbei MSN II and Pilot Series

Godox Flash Tube for AD400Pro and AD400Pro II The Godox flash tube compatible with AD400Pro and AD400Pro II is the right original replacement part if you want to keep your flash unit fully operational. It offers 400 Ws of power, a color temperature of 5600 K, and can be replaced by the user. This allows you to quickly and easily get your Godox flash unit back up and running. Suitable for This flash tube is intended for owners of a Godox AD400Pro or AD400Pro II who are looking for a suitable and original replacement part. It is suitable for photographers who work in the studio or on the go and want a clean, compatible solution in case of a defect or wear and tear of their flash tube. Original Godox product Suitable for Godox AD400Pro and Godox AD400Pro II User-replaceable 400 Ws power Color temperature of 5600 K Suitable replacement part for quick continued operation of your flash unit What makes this product special The key advantage of this Godox flash tube is that it is designed to fit the AD400Pro and AD400Pro II perfectly. You are not getting a generic accessory, but an original Godox product that is tailored to these models. This ensures a reliable replacement solution and gives you peace of mind when using your flash unit. Compatibility Suitable for Godox AD400Pro Suitable for Godox AD400Pro II Technical details Brand: Godox Product type: Flash tube Power: 400 Ws User replaceable: Yes Color temperature: 5600 K Scope of delivery 1 x Godox flash tube compatible with AD400Pro and AD400Pro II Conclusion This Godox flash tube is the right choice if you are looking for an original and compatible replacement part for your Godox AD400Pro or AD400Pro II. You benefit from guaranteed compatibility, easy replaceability, and clearly defined product features. Ideal for anyone who wants to get their flash unit back up and running reliably and without any detours.

Jinbei HD-610 HD-601 HD-400pro replacement flash tubeFlash tube for various Jinbei flashes Technical data:up toPower: 600 watt secondsto fit:  Jinbei HD-601Jinbei HD-610Jinbei HD-400proJinbei Mars-3 proScope of delivery:1 x Jinbei 600Ws Flash Tube

Jinbei 150 Watt replacement modelling light for Spark / DP & DP-II & DP-III studio flashesThis Jinbei modeling light replaces the modeling light on the Jinbei DP, DPII, DPIII, DPE, Millennia II, Spark studio flash units and restores their operational readiness! The problem-free and fast exchange takes place by pulling out the old or inserting the new modelling light.Notes on changing the modelling lightTo change the modeling lamp, turn off the flash, disconnect it from the power supply, and wait until the modeling lamp is cold. Please use clean cotton gloves or a microfibre cloth to change the modelling light.Technical details:Power consumption: 150 WLamp base: E27Compatible with: Jinbei DP, DPII, DPIII, DPE, Millennia II, Spark studio flashesRA: 99.8TLCI: 100Lux: 4280Kelvin: 2850KScope of delivery:1 x Jinbei modeling lamp 150 W for Jinbei DP, Millennia, Spark studio flashesNote: The lights will be checked by us before shipment, if they arrive broken, please contact us immediately.

Flash tube for Jinbei MSN-1200 pro Technical data: Power: 1200 watt seconds suitable for: Jinbei MSN-1200 pro HSS Studio Flash Scope of delivery: 1 x Jinbei 1200Ws flash tube

The Godox flash tube for the H2400P flash head is a 2400Ws replacement tube. Scope of delivery:1 x FT-H2400P Flash Tube

Godox Flash Tube for AD600Pro and AD600Pro II The Godox flash tube for AD600Pro and AD600Pro II is the right original replacement part if you want to keep your flash unit fully operational. It offers 600 Ws of power, a color temperature of 5600 K, and can be replaced by the user. This allows you to quickly and easily get your Godox flash unit back up and running. Suitable for This flash tube is intended for owners of a Godox AD600Pro or AD600Pro II who are looking for a suitable and original replacement part. It is suitable for photographers who work in the studio or on the go and want a clean, compatible solution in case of a defect or wear and tear of their flash tube. Advantages at a glance Original Godox product Suitable for Godox AD600Pro and Godox AD600Pro II User-replaceable 600 Ws power output Color temperature of 5600 K Suitable replacement part for quick continued operation of your flash unit What makes this product special The key advantage of this Godox flash tube is that it is designed to fit the AD600Pro and AD600Pro II perfectly. You are not getting a generic accessory, but an original Godox product that is tailored to these models. This ensures a reliable replacement solution and gives you peace of mind when using your flash unit. Compatibility Suitable for Godox AD600Pro Suitable for Godox AD600Pro II Technical details Brand: Godox Product type: Flash tube Power: 600 Ws User replaceable: Yes Color temperature: 5600 K Scope of delivery 1 x Godox flash tube compatible with AD600Pro and AD600Pro II Conclusion This Godox flash tube is the right choice if you are looking for an original and compatible replacement part for your Godox AD600Pro or AD600Pro II. You benefit from guaranteed compatibility, easy replaceability, and clearly defined product features. Ideal for anyone who wants to get their flash unit back up and running reliably and without any detours.

Jinbei HD-610 - Glass Protector - Protective glassThis safety glass can be mounted on the HD-610 from Jinbei. It protects the sensitive lighting element of the flash from damage and dirt, thus extending the life of the lamp. It also prevents the risk of direct skin contact with the lamp when changing the light shaper.Fits to:Jinbei HD-610Scope of delivery:1 x protection glass for Jinbei HD-610

Halogen modeling light for studio monolight strobes 150W 220-240VHalogen modeling light 150W for Jinbei DM3-400 Studio monolight strobes.It shows the light position od the subject and supports the autofocus.Do not touch the bulb with bare hands!

Godox flash tube for AD800Pro as a suitable replacement part for reliable flash performance The Godox flash tube for the AD800Pro is a suitable replacement part for photographers who want to keep their studio flash reliably operational. It offers 800 W, a color temperature of 5800 K (+/-200 K) and can be replaced by the user. This makes it a practical solution for replacing an existing flash tube or as a useful spare in the studio and for planned use. Who it's suitable for This flash tube is suitable for photographers who already use a Godox AD800Pro. It is particularly useful for anyone who wants to keep their equipment reliably ready for use in their everyday professional life and wants to have a suitable replacement part at hand. An additional flash tube is also a practical addition for studios or regular productions. Suitable for Godox AD800Pro 800 W power Color temperature of 5800 K (+/-200 K) Can be changed by the user Practical as a replacement or spare Useful addition for reliable flash operation What makes this product special The Godox flash tube is specially designed for the AD800Pro, making it a suitable solution for targeted replacement. It is particularly practical that it can be replaced by the user themselves. This saves time in your daily work and helps you get your flash unit back up and running quickly. As a spare, it is also a useful addition for photographers who want to work with their AD800Pro in a planned manner and without unnecessary interruptions. Compatibility The Godox flash tube is suitable for the Godox AD800Pro. Technical details Wattage: 800 Color temperature: 5800 K (+/-200 K) Replaceable: Can be replaced by the user Scope of delivery 1 x FT-800Pro flash tube for Godox AD800Pro Conclusion The Godox flash tube for the AD800Pro is a practical and suitable addition for photographers who depend on reliable operation of their flash unit. With 800 W, 5800 K (+/-200 K) and a self-replaceable design, it is a clean solution as a spare part or backup. Anyone who wants to work with the AD800Pro should complement their setup with this flash tube.  

Flash tube for Jinbei MSN-800pro Technical data: Power: 800 watt seconds suitable for: Jinbei MSN-800pro HSS Studio Flash Scope of delivery: 1 x Jinbei 800Ws flash tube

Godox Flash Tube for AD300Pro and AD300Pro II The Godox flash tube for AD300Pro and AD300Pro II is the right original replacement part if you want to keep your flash unit fully operational. It offers 300 Ws of power, a color temperature of 5600 K, and can be replaced by the user. This allows you to quickly and easily get your Godox flash unit back up and running. Suitable for This flash tube is intended for owners of a Godox AD300Pro or AD300Pro II who are looking for a suitable and original replacement part. It is suitable for photographers who work in the studio or on the go and want a clean, compatible solution in case of a defect or wear and tear of their flash tube. Advantages at a glance Original Godox product Suitable for Godox AD300Pro and Godox AD300Pro II User-replaceable 300 Ws power output Color temperature of 5600 K Omega-shaped, 2-pin design What makes this product special The key advantage of this Godox flash tube is that it is designed to fit the AD300Pro and AD300Pro II perfectly. You are not getting a generic accessory, but an original Godox product that is tailored to these models. This ensures a reliable replacement solution and gives you peace of mind when using your flash unit. Compatibility Suitable for Godox AD300Pro Suitable for Godox AD300Pro II Technical details Brand: Godox Product type: Flash tube Power: 300 Ws Shape: Omega-shaped Design: 2-pin User replaceable: Yes Color temperature: 5600 K Scope of delivery 1 x Godox flash tube compatible with AD300Pro and AD300Pro II Conclusion This Godox flash tube is the right choice if you are looking for an original and compatible replacement part for your Godox AD300Pro or AD300Pro II. You benefit from guaranteed compatibility, easy replacement, and clearly defined product features. Ideal for anyone who wants to get their flash unit back up and running reliably and without any detours.

Jinbei HD-200pro Flash Tube With the Jinbei HD-200pro Flash Tube, you get a professional replacement tube for your Jinbei flash heads – for consistent brightness, long-lasting performance, and professional results in your photo setup. The Jinbei HD-200pro flash tube ensures reliable light output and is specially designed for daily use in the studio and on location. It offers: High-quality filament material that guarantees stable color temperature. Robustness and long service life for all flash intensities. Seamless compatibility with Jinbei HD-200Pro flash Special features and advantages Easy installation: You can easily replace the tube – no tools required, a clear advantage over similar models. Constant color temperature: For consistent color reproduction without color casts at different power levels. Durability & reliability: Designed for high flash contacts, ideal even for intensive use. Compared to alternative models, the HD-200pro is more precise in its manufacturing and offers higher temperature stability—for consistent results across many shots. Compatibility Jinbei HD-200Pro Technical details Type: Flash tube (HD-200pro) Color temperature: approx. 5600 K (daylight) Power: 200 Ws Connection: Bayonet mount Scope of delivery 1 × Jinbei HD-200pro flash tube

Godox Flash Tube for SK300IIV and SK400IIV – Replacement flash tube for studio photography The Godox Flash Tube for SK300II and SK400II is the perfect replacement component for your studio flash units. With high light output and precise color rendering, it ensures consistent results in your professional photography. This flash tube has been specially developed as an original replacement part for the Godox SK300II and SK400II studio flashes. It impresses with its reliable performance, high light output, and long service life. Thanks to its simple installation, you can replace the flash tube yourself and be up and running again in no time – whether in the studio or on location. The integrated UV protective coating ensures natural color rendering, while the precise design guarantees a perfect fit. Special features and advantages High color fidelity thanks to UV-coated glass tube Long service life – ideal for intensive use in photo studios Easy installation without additional tools Perfect compatibility with SK300IIV & SK400IIV – no readjustment necessary Compact replacement for studio storage Compared to third-party products, the original Godox flash tube is optimally matched to the respective flash system and thus guarantees consistent light quality. Compatibility Godox SK300II Godox SK400II Note: Not compatible with older SK models without the “II” designation. Technical Light color: approx. 5600K (daylight) Power: approx. 300–400 Ws depending on flash model Mounting: plug-in system, suitable for SKIIV series Service life: up to 10,000 flashes Scope of delivery 1x Godox flash tube for SK300II-V / SK400II-V

This safety glass can be mounted on the HD-610 Pro from Jinbei. It protects the sensitive lighting element of the flash from damage and dirt, thus extending the life of the lamp. It also prevents the risk of direct skin contact with the lamp when changing the light shaper. Fits to: Jinbei HD-610 Pro   Scope of delivery: 1 x protection glass for Jinbei HD-610 Pro  

Godox Flash Tube for AD1200Pro The Godox flash tube for AD1200Pro is the right original replacement part if you want to keep your flash unit fully operational. It offers 1200 Ws of power, a color temperature of 5600 K, and can be replaced by the user. This allows you to quickly and easily get your Godox AD1200Pro back up and running. Suitable for This flash tube is intended for owners of a Godox AD1200Pro who are looking for a suitable and original replacement part. It is suitable for photographers who work in the studio or on location and want a clean, compatible solution in the event of a defect or wear and tear on their flash tube. Advantages at a glance Original Godox product Suitable for Godox AD1200Pro User-replaceable 1200 Ws power Color temperature of 5600 K Suitable replacement part for quick continued operation of your flash unit What makes this product special The key advantage of this Godox flash tube is that it is designed to fit the AD1200Pro perfectly. You are not getting a generic accessory, but an original Godox product that is tailored to this model. This ensures a reliable replacement solution and gives you peace of mind when using your flash unit. Compatibility Suitable for Godox AD1200Pro Technical details Brand: Godox Product type: Flash tube Power: 1200 Ws User replaceable: Yes Color temperature: 5600 K Scope of delivery 1 x Godox flash tube compatible with AD1200Pro Conclusion This Godox flash tube is the right choice if you are looking for an original and compatible replacement part for your Godox AD1200Pro. You benefit from guaranteed compatibility, easy replacement, and clearly defined product features. Ideal for anyone who wants to get their flash unit back up and running reliably and without any detours.

Glass protective cover for Godox AD1200Pro – Reliable protection for your flash tube The glass protective cover for the Godox AD1200Pro is an essential accessory if you want to protect your flash tube optimally. It protects the sensitive glass elements from dust, scratches, and impacts, thereby extending the life of your equipment. Specially designed for the Godox AD1200Pro, the glass protective cover fits perfectly and is easy to install. Thanks to its robust construction, it offers you maximum safety in the studio and on location. The cover not only protects against external influences, but also ensures even light distribution without compromising light quality. Special features and advantages Perfect fit for the Godox AD1200Pro Robust glass material for optimal protection Easy to use and quick to install Protects against dust, dirt, and physical damage Extends the life of your flash tube Compatibility Specially designed for the Godox AD1200Pro Not compatible with other flash models Technical details Material: High-quality protective glass Weight: approx. 90 g Dimensions: approx. 69.8 x 79.4 x 65 Color: Transparent Mounting: Directly on the flash head of the Godox AD1200Pro Scope of delivery 1x glass protective cover for Godox AD1200Pro With this glass protective cover, you get a durable, practical, and easy-to-use accessory that provides optimal protection for your investment in the Godox AD1200Pro.  

Technisch Daten:Leistung: 1200 Wattsekundenpassend zu: Godox AD-H1200B Lieferumfang:1 x Godox Blitzröhre 1200 WS

Ring flash Godox ML-150 II flash tubes replacement With this replacement part, you can ensure that your Godox ML-150 II ring flash always delivers optimal light output. Ideal for photographers who need precise and even illumination. The flash tube for the Godox ML-150 II is a high-quality replacement part that has been specially developed for precise and even illumination. It ensures that your ring flash works reliably again and that you achieve optimal results for studio shots, macro shots, or beauty photography. The tube's modern technology ensures constant light output and extends the life of your ring flash. Special features and advantages Easy installation: Quick and easy to replace Maximum light output: Maintains the full intensity of the ML-150 II Reliability: Guaranteed stable results for every shoot. This replacement part saves you time and money by ensuring that your studio equipment is ready for immediate use again. Compatibility Specially designed for the Godox ML-150 II Ring Flash Technical details Power: Equivalent to the original flash tube Light color: Neutral white Material: Glass, heat-resistant Dimensions: Perfect fit for ML-150 II Weight: Lightweight and easy to handle Connection: Directly compatible with ring flash internal connection Scope of delivery 1 x Godox ML-150 II flash tube replacement