Godox XPro II TTL Wireless Flash Trigger for Sony Cameras

Godox V860III system flash with LED light for Sony cameras Power, speed and integrated radio transmission make the V860III TTL Li-Ion system flash from Godox a very good option for the demanding photographer. The V860III is fully compatible with this manufacturer's systems and supports many advanced features and functions. It is also equipped with the Godox 2.4 GHz X wireless system, which offers both master and slave TTL functionality with a range of up to 50 meters. In addition, the flash is powerful and versatile, with a guide number of 60 at ISO 100 and 105 mm and a zoom range of 20 to 200 mm, which can be extended to 14 mm using the extendable plate. This system flash is powered by a rechargeable lithium-ion battery, thus achieving the flash's fast recharge time. For general operation, the V860III offers all the features of an indirect flash, including tilt from -7 to 90° and rotation left and right 180°. As a TTL-compatible unit, this flash offers support for high-speed sync, flash exposure compensation, sync to 1st and 2nd axis, and flash sync to 2nd axis. It can also act as an optical master or slave unit if needed.Another big plus of this system flash is that it uses the same battery as the Godox V1 flash. For remote control, these two devices are suitable at the moment: Godox Xpro transmitter to Sony Godox X2T transmitter to Sony All advantages at a glance: wireless Godox 2.4 GHz X radio system has an impressive rangepowerful guide number of 60 at ISO 100 and 105 mmZoom range from 20 to 200 mmShort recharge times For technicians: TTL adjustment option +/- 3EVGuide number 60Power in watts 76Manual regulation 1/1 to 1/256High Speed Sync up to 1/8000sSynchronization to 1st and 2nd shutter curtainsAF light center 0.6 - 10 mAF light peripheral 0.6 - 5 mFlash Zoom 20-200 mm with lens hood up to 14 mmWireless Godox 2.4 GHz X radio system with range up to 100 mFirmware update bar via USB port (Micro-USB)Color temperature: 5300±200kLED modeling light with 2 Watt X-Sync connector 2,5 mmNumber of flashes with one battery charge approx. 480Weight with battery approx. 530 g Scope of delivery: 1 x Godox V860III to Sony1x Godox VB26 Li-ion battery 1x Godox charger for VB261 x carrying bag1 x stand1 x manual in English   You can find all the technical details in the Godox V860III to Sony instruction manual in English

System Flash with Sony ADI and P-TTL With full support for Sony P-TTL and a built-in 2.4 GHz radio system, the Godox TT685S II System Flash makes it easy to create both simple and elaborate lighting setups. A powerful and effective lighting tool, this flash offers a high guide number of 60 at ISO 100 and a zoom range of 20-200mm. The TT685S II system flash works as a wireless master or slave unit with TTL functionality. You can find the corresponding transmitters here: (with these transmitters, only Godox flashes can be controlled). Xpro Sony or X2T Sony For maximum versatility, the flash head tilts from -7 to 120° and rotates a full 330°, giving you more flexible flash angles and a more efficient lighting setup process. Also new and unique is the TCM (TTL Converted to Manual) function, which allows instant switching from TTL to manual mode. This feature helps you memorize the correct exposure value and is useful for quickly finding a good starting point for setting external flashes in manual mode. An easy-to-read LCD display on the back shows flash settings, and the flash has a 2.5mm sync port for easy wired connections. For technicians: - TTL adjustment capability +/- 3EV- Maunelle regulation 1/1 to 1/128 in 1/3 increments- High Speed Sync - up to 1/8000s- Flash charging time: 0.1 - 2.6 seconds- Second shutter curtain - AF Assist light - Flash zoom adjustment - 2.4 GHz, range up to 100m- Compatible with Godox AD600pro or AD400pro and AD200pro - Firmware self-updatable via USB-C port- X-Sync connection with 2.5 mm- Reflector: manual zoom adjustment, 20 - 200 mm (up to 14 mm, with wide angle diffuser), reflector card- Tiltable from -7 to 120- Horizontally rotatable up to 330- Connection for battery pack (Attention: Connection "Canon")- needs 4 pieces of AA batteries we recommend the use of Rechargeable batterys Compatible with the following cameras: Sony Alpha A6000 A6100 A6300 A6400 A6500 A6600Sony Alpha A68 A77 IISony Alpha A7 A7 II A7 III A7 IVSony Alpha A7R A7R II A7R III A7R IVSony Alpha A7S A7S II A7S IIISony Alpha A9 A9 IISony Alpha A7CSony Alpha A99 A99 IISony Alpha ZV-E10Sony Alpha a1Sony Cyber-shot DSC-HX400V DSC-HX50V DSC-RX10 DSC-RX10 II DSC-RX10 III DSC-RX10 IV DSC-RX100 IISony ZV-1 Scope of delivery 1x Godox TT685 version 2 to Sony  1x carrying bag1x stand1x manual in English Note: If you want to use a battery pack with this flash, you need the connector for Canon flashes!   You can find all the technical details in the Godox TT685II to Sony instruction manual in English

Innovative design: The Godox V1Pro Sony clip-on flash The best clip-on flash for Sony, now even better! The Godox V1Pro clip-on flash for Sony is characterized by a round flash head and a detachable additional flash. This is there to perfect the lighting of your scenes. The Pro version of the clip-on flash not only impresses with its compact design, similar to the original V1 clip-on flash, but is also equipped with additional functions. Simply attach the included SU100 accessory flash to the front of the Godox V1Pro to Sony to optimize your portrait shots in manual or TTL mode. The powerful 76-watt clip-on flash is compatible with many Sony cameras and supports E-TTL / E-TTL II automatic mode. The Godox V1Pro for Sony offers a zoom range of 28 to 105 mm as well as a 330° rotation of the head and a tilt range of -7 to 120°. The round flash head ensures a uniform quality of light for creative effects and a distinctive look. The detachable additional flash for the small additional light The SU-1 additional flash included in the scope of delivery can be easily attached to or removed from the front of your V1Pro to Sony. When switched on, the auxiliary flash acts as an additional fill light, which is extremely useful for your portrait shots. You can set the power of the subflash from 1/128 to 1/1 and -3 to +3 EV in 1/3 increments. Your powerful, versatile on-camera light source The Godox V1Pro clip-on flash for Sony supports high-speed synchronization up to 1/8000 s, ideal for bright backgrounds and shots with large apertures. It also enables synchronization to the first and second shutter curtain as well as flash exposure compensation. In addition to these functions, a 2W LED modeling light has been added, which can be used for careful composition. The rechargeable battery ensures longevity The V1Pro clip-on flash is powered by an included rechargeable battery with a charging time of 1.5 sec - fast enough to keep up with the action. The flash output can be set from 1/1 to 1/256, allowing you to take 500 full power flashes on one battery charge. For continuous shooting, your V1Pro Sony can flash 100 times at full power before the overheat protection level is reached. The supplied battery has an integrated USB-C port, which allows it to be charged directly on any USB-C compatible device. If the capacity of this battery is not sufficient, the Godox V1Pro clip-on flash for Sony can be supplied with power using the separately available PB960 battery pack. The 2.4 GHz X wireless radio system from Godox for your flexibility The Godox 2.4 GHz X wireless radio system has a range of up to 100 meters. This makes your Godox V1Pro clip-on flash to Sony, where you can choose between 32 channels and different groups, a very flexible clip-on flash. This allows you to avoid interference with other photographers or, in the case of complex setups, to trigger each flash individually according to your needs.   Further advantages and features of the Godox V1Pro clip-on flash In addition to the hot shoe, the Godox V1Pro clip-on flash for Sony has a 2.5 mm sync connector for a wired connection. The flash head is equipped with a magnetic surface to attach optionally available Godox light modifiers at lightning speed. With the clear LCD display, you are always up to date with your settings. The modeling light with a colour temperature of 3,300 K and an output of 2 W allows you to create a precise composition. Firmware updates can be conveniently installed via the USB-C port. The compact dimensions of 15.6 x 12.4 x 7.59 cm and a low weight of just 580 grams make the V1Pro the ideal companion for your photography. The Godox V1Pro clip-on flash for Sony is compatible with the optional AK-R1 set, which can be attached magnetically. Specific information on the Godox V1Pro clip-on flash for Sony: Please note that the flash head of the Godox V1Pro clip-on flash for Sony must be raised in order to use the SU100 add-on flash supplied. Also note that this add-on flash does not work with wireless transmission or high-speed synchronization. Scope of delivery: 1 x Godox V1Pro Sony clip-on flash 1 x carrying bag 1 x additional flash SU-1 1 x Godox VB30 battery 1 x USB-C cable 1 x power adapter with USB-A connection 1 x Stand for clip-on flash 1 x instruction manual in English and Chinese You can download the instructions for the Godox V1Pro Sony clip-on flash here   You can find all the technical details in the Godox V1Pro to Sony instruction manual in English

MF-R76S ring flash for Sony from GodoxThe Godox MF-R76S TTL Macro Ring Flash is compatible with Sony TTL and illuminates your subject with soft, even light, ideal for macro photography. The ring flash consists of two components: a controller, which is mounted on the hot shoe of your camera, and the ring flash, which is attached to the filter thread of your lens. The set already includes adapter rings with a diameter of 49, 52, 55, 58, 62, 67, 72 and 77 mm. With a guide number of 45.9' at ISO 100, the MF-R76S provides detailed all-around illumination for close-up shots. The dual tube design allows each side to be set to a different light level for higher contrast illumination when needed.To increase the camera's versatility, the MF-R76S offers TTL and manual modes in combination with HSS, First and Second curtain sync functions. In addition, two flash assist lights with 10 adjustable power levels are very useful for low-light scenes. The control unit powers the system via an included lithium battery, allowing long exposures with up to 550 flashes at full power. A large display shows flash settings for easy navigation and control. The package also includes a charger, USB-C cable, and storage bag. The only thing that is still needed is a power adapter for the outlet, that would be zb a suitable.Wireless control with Godox 2.4 GHz X The MF-R76S works with the Godox 2.4 GHz X Wireless System, which receives radio signals from the separately available XPro/X2T transmitters. With this system, you can create a variety of lighting setups and different effects. That said, if you want to use the flash detached from the camera, a Godox remote trigger is required. These models are available at the moment:Godox XPro to SonyGodox X2T to SonyGodox Xpro-II to SonyThe advantages of this ring flash at a glance:Compatible with Sony TTLRemote control via Godox 2.4 GHz wireless X systemOptimized for macro and close-up photographyRechargeable lithium battery includedLens adapter rings already includedScope of delivery:1 x Godox MF-R76S TTL macro ring flash for Sony1 x 49 mm adapter ring1 x 52 mm adapter ring1 x 55 mm adapter ring1 x 58 mm adapter ring1 x 62 mm adapter ring1 x 67 mm adapter ring1 x 72 mm adapter ring1 x 77 mm adapter ring1 x WB100 lithium battery1 x USB charger1 x USB-C charging cable1 x storage bag1 x Instruction manual English / Chinese

System flash with round flash head to Sony Full TTL support for your Sony camera The Godox V1S is the first TTL flash from Godox with a round flash head and with HSS support to Sony. This allows sync times of up to 1/8000s. Now Godox does not need to fear the comparison with the Profot A1. This text is from Fotichaestli and may be downloaded from big webshops with D..... must not be used. The flash can be used in all known modes like TTL, manual and stroboscopic or multi. Additionally the V1S can be triggered by different Godox transmitters, because a receiver is already built into the flash.   These transmitters can be found here:   X2T-S   Xpro-S   The light shapers from the Godox AK-R1 set can be magnetically attached to the flash head. If you want to use the flash with a Softobox with Bowensmount, this is the suitable Godox S2 adapter. Besides the HSS function the V1S also offers Flash Exposure Compensation, which is used to adjust the flash amount. So you can control the flash light independently from the actual exposure from the camera. To make a flash exposure bracketing, you use the FEB function (Flash Exposure Bracketing). This allows you to quickly find the optimal flash exposure for a subject without having to make many settings. The V1S comes with an automatic zoom range of 28-105mm. With a power of 76Ws the flash is also able to flash against the sun. With the same transmitter you can also control the AD600B, so the Godox system is very easy to expand without having to buy new transmitters and receivers all the time. The special thing about this flash is that it is powered by a Li-Ion battery. This battery allows up to 480 flashes with one charge. You can find the right replacement battery for long shoots here.   For the technicians:   - TTL adjustment +/- 3EV- Power 76Ws- Maunelle regulation 1/1 to 1/128- High Speed Sync - up to 1/8000s- Second closing curtain - AF Assist Light - Flash zoom adjustment - 2.4 GHz, range up to 100m- Compatible with Godox AD600pro AD400pro AD200, AD200pro- Firmware self updatable- color temperature: 5600±200k - 2.5mm Sync Connection- USB connection (Micro-USB)- LED light with 2Watt 3300±200k - Charging time under 1.5 seconds- Flashes with one battery charge approx. 480- Weight with battery 530g without 420g- Battery type: Godox VB26 Compatible with all Sony cameras that have a Sony Multi Interface Sony cameras with MI flash base e.g. A7 A7R A7S A7 II A7R II A7S II A7S II A7 III A7R III A6000 A6300 A6500 etc. Scope of delivery:   1x Godox V1S to Sony  1x Godox VB26 Li-ion battery1x Godox charger for VB261x transport bag1x stand1x manual in English       You can find all the technical details in the Godox V1 to Sony instruction manual in English Tu trouveras tous les détails techniques dans le mode d'emploi Godox V1 pour Sony en français

Simple studio flash with 300 watt seconds from Godox   Godox is proud to present the new SK300II-V, an evolution of the SK series.  True to the principle of providing photographers with versatile and technologically advanced photographic equipment. This allows you, as a creative photographer, to fully realize your creative potential and work efficiently.   With the SK300II-V studio flash from Godox you get a studio flash which is equipped with the latest technology. The studio flash offers a fast charging time to flash readiness. The 10W LED modeling light is flexibly adjustable and gives you a good feeling before photography.   Settings are made via push buttons on the back of the unit and displayed on the easy-to-read LCD. The SK300II-V has built-in 2.4 GHz wireless X technology with 32 channels. With an optional X1, X2 or XPro transmitter, you can conveniently control the flash output and modeling light remotely. The flash head also features S1/S2 slave triggering, which facilitates the use of cameras with pre-flash. In addition, the SK300II-V has a Bowens accessory port on the front that allows the use of Godox modifiers as well as accessories from many other manufacturers that use this system.   Advantages at a glance:   Built-in receiver for Godox's 2.4 GHz X systemBowens light formaer connection for a wide selectionOptical receiver for triggering by another flash already built inSimple operationEasy-to-read LCD display shows settings and functions   For technicians:   Guide number of 58(300Ws)Flash charging time: 0,1-0,9sControl range: 1/1 to 1/16Modeling light: 10W LED / 5700K +/- 200 Kelvinmodeling light control range: 5% - 100%Bowens S-type bayonet adapterDimensions: 350x206x137mmWeight: 2 kg   Scope of delivery:   1x Godox SK300II-V1x flash tube1x protection cap1x cold current cable       You can find all the technical details in the Godox SK300II instruction manual in English

Simple studio flash with 400 watt seconds from Godox   Godox is proud to present the new SK400II-V, an evolution of the SK series.  True to the principle of providing photographers with versatile and technologically advanced photographic equipment. This allows you, as a creative photographer, to fully realize your creative potential and work efficiently.   With the SK300II-V studio flash from Godox you get a studio flash which is equipped with the latest technology. The studio flash offers a fast charging time to flash readiness. The 10W LED modeling light is flexibly adjustable and gives you a good feeling before photography.   Settings are made via push buttons on the back of the unit and displayed on the easy-to-read LCD. The SK300II-V has built-in 2.4 GHz wireless X technology with 32 channels. With an optional X1, X2 or XPro transmitter, you can conveniently control the flash output and modeling light remotely. The flash head also features S1/S2 slave triggering, which facilitates the use of cameras with pre-flash. In addition, the SK300II-V has a Bowens accessory port on the front that allows the use of Godox modifiers as well as accessories from many other manufacturers that use this system.   Advantages at a glance:   Built-in receiver for Godox's 2.4 GHz X systemBowens light formaer connection for a wide selectionOptical receiver for triggering by another flash already built inSimple operationEasy-to-read LCD display shows settings and functions   For technicians:   Guide number of 65 (400Ws)Flash charging time: 0,1-0,9sControl range: 1/1 to 1/16Modeling light: 10W LED / 5700K +/- 200 Kelvinmodeling light control range: 5% - 100%Bowens S-type bayonet adapterDimensions: 390x232x137mmWeight: 2.1 kg   Scope of delivery:   1x Godox SK400II-V1x flash tube1x protection cap1x cold current cable     You can find all the technical details in the Godox SK400II instruction manual in English

HC-SP hot shoe cover for Sony multi-interface shoe This protective cap is suitable for clip-on flashes, microphones, and other devices with a Sony multi-interface shoe. The protective cap is simply attached to the MIS connection of the respective device. Once attached, it protects the sensitive contacts of the connection from dirt and damage. Thanks to the protective cap, you can safely transport your flash unit or microphone in your bag or backpack without worrying about damaging the connectors on the device. Special features and advantages Effective protection for the hot shoe in everyday use and when traveling Perfect fit for Sony multi-interface connectors Extends the life of camera connectors Lightweight, compact, and ready for use at any time Discreet design to match the camera body Compatibility Sony HVL-F60M External Flash/Video Light Sony HVL-F20M External Flash Sony ADP-MAA Sony Multi-Interface Shoe Adapter Nissin i40 Compact Flash for Sony Cameras Sony ECM-W1M Wireless Microphone Sony HVL-F32M MI (Multi-interface Shoe) Camera Flash ECM-XYST1M Godox V1 to Sony Godox TT685 to Sony Godox V860-2 to Sony Godox V860-3 to Sony Godox Xpro to Sony Godox Xpro-II to Sony Technical details Material: Plastic Color: Black Weight: approx. 2 g Scope of delivery 1 x HC-SP protective cap from JJC

Godox AD1200Pro studio flash with rechargeable battery for maximum light output and flexible use The Godox AD1200Pro is a battery-powered flash system for photographers who want to use a lot of light output flexibly. With 1200 Ws, TTL support, high-speed synchronization, and an integrated 40 W LED modeling light, this system is designed for demanding productions with high light requirements. If you want to work on the go and plan to use powerful flash output at the same time, the AD1200Pro offers you a performance-oriented solution. Who it's for The Godox AD1200Pro is suitable for photographers who need a lot of light. It is particularly suitable for productions that require high light reserves, flexible positioning, and a battery-powered workflow. If you want to work independently of a fixed power source and rely on powerful performance, this flash system is a compelling choice. Advantages at a glance 1200 Ws power for very light-intensive applications Studio flash with rechargeable battery for flexible working without a fixed power connection TTL metering via separately available transmitter High-speed synchronization up to 1/8000 sec. Integrated 40 W LED modeling light Integrated radio/HF receiver and optical receiver 8-step power control Suitable for demanding shoots with high lighting requirements 5/8" receiver for attaching the light USB-C socket for firmware updates What makes this product special The Godox AD1200Pro is aimed at photographers who need very high light output from a battery-powered flash system. With 1200 Ws, it offers clear reserves for situations where more compact battery-powered flashes are not sufficient. At the same time, the system remains mobile and supports you with TTL, HSS, and integrated modeling light for flexible and controlled lighting. The AD1200Pro really comes into its own during shoots that demand high performance and independence from the power grid. Compatibility TTL metering is supported via a transmitter that is not included in the scope of delivery. Compatible systems include Canon E-TTL / E-TTL II, FUJIFILM TTL, Four Thirds TTL, Nikon i-TTL, Pentax P-TTL, and Sony ADI / P-TTL. In addition, the Godox AD1200Pro has an integrated radio/HF receiver and an integrated optical receiver. Technical details Power range: 1200 Ws Color temperature: 5600 K TTL metering: Yes, via transmitter not included in delivery Supported TTL systems: Canon E-TTL / E-TTL II, FUJIFILM TTL, Four Thirds TTL, Nikon i-TTL, Pentax P-TTL, Sony ADI / P-TTL Modeling light: 40 W LED integrated Watt seconds: 1200 Ws Power control: 8-step range Wireless remote control: Radio/HF receiver integrated Optical receiver: Integrated Synchronization speed: 1/8000 sec. Power source: Rechargeable battery Light inputs/outputs: 1x integrated cable with proprietary power input Inputs/outputs power supply/controller: 1x 1/8" / 3.5 mm flash synchronization input (socket), 1x USB-C socket for firmware update Light fixture mounting: 1x 5/8“ receiver Weight: 8.25 kg (light fixture) Scope of delivery 1 x flash head 1 x generator 1 x Godox WB1200 battery for AD1200Pro 1 x Godox battery charger for the AD1200 Pro battery-powered flash system 1 x power cord 1 x reflector 1 x glass protective cover 1 x Godox carrying bag for the AD1200Pro Conclusion The Godox AD1200Pro is the right choice for photographers looking for a battery-powered flash system with very high performance. With 1200 Ws, TTL, HSS, integrated LED modeling light, and battery operation, it offers you powerful reserves for demanding productions with high lighting requirements. If you want to work on the go without compromising on performance, this is a well-designed and powerful solution.     You can find all the technical details in the Godox AD1200Pro user manual        

Godox X1R-S receiver for Sony – your partner for wireless flash triggering The Godox X1R-S receiver is perfect for you if you are looking for a reliable and powerful radio receiver for your Sony flash. Whether you are a professional photographer or an ambitious amateur photographer, this receiver offers you everything you need for creative and flexible flash control. Full compatibility with Sony The X1R-S was designed specifically for Sony detachable flashes. It mounts on the flash foot of the corresponding flash and is fully compatible with the ADI/P-TTL flash system. This means that you have full control over your flash units – including flash exposure compensation, first or second curtain sync, and high-speed sync up to 1/8000 second. You can conveniently and precisely adjust your flash power without compromise. To control the X1R-S, a Godox transmitter is required, which is the Godox Xpro Godox Xpro II Godox X2T or the Godox X3 Wireless freedom Thanks to 2.4 GHz wireless technology, you can change flash settings from a distance of up to 100 meters. You no longer have to worry about annoying cables or complicated setups. With the Godox X1R-S, you have the freedom to design your set exactly as you want it – without any restrictions. Versatile and powerful The receiver supports up to five flash groups and 32 channels. This makes it easy to control multiple flashes simultaneously and create creative lighting scenarios. Whether on-location or in the studio, the Godox X1R-S offers you the flexibility you need. Easy to use The intuitive menu navigation and compact design make it easy to use. You can get started right away and don't have to worry about complicated settings. The Godox X1R-S receiver is a reliable companion that will never let you down. Technical details: Radio technology: 2.4GHz Range up to 100 meters Max. sync speed in HSS mode: 1/8000s Batteries: 2xAA each (not included) We recommend using rechargeable batteries Contents: 1 x Godox X1R-S receiver1 x camera cable 1 x 3.5mm jack cable incl. adapter 6.5mm1x user manual (English) without battery

Godox X1R-N receiver for Nikon – your partner for wireless flash triggering The Godox X1R-N receiver is perfect for you if you are looking for a reliable and powerful radio receiver for your Nikon flash. Whether you are a professional photographer or an ambitious amateur photographer, this receiver offers you everything you need for creative and flexible flash control. Full compatibility with Nikon The X1R-N was designed specifically for Nikon detachable flashes. It mounts on the flash foot of the corresponding flash and is fully compatible with the i-TTL flash system. This means that you have full control over your flash units – including flash exposure compensation, first or second curtain sync, and high-Npeed sync up to 1/8000 second. You can conveniently and precisely adjust your flash power without compromise. To control the X1R-N, a Godox transmitter is required, which is the Godox Xpro Godox Xpro II Godox X2T or the Godox X3 Wireless freedom Thanks to 2.4 GHz wireless technology, you can change flash settings from a distance of up to 100 meters. You no longer have to worry about annoying cables or complicated setups. With the Godox X1R-N, you have the freedom to design your set exactly as you want it – without any restrictions. Versatile and powerful The receiver supports up to five flash groups and 32 channels. This makes it easy to control multiple flashes simultaneously and create creative lighting scenarios. Whether on-location or in the studio, the Godox X1R-N offers you the flexibility you need. Easy to use The intuitive menu navigation and compact design make it easy to use. You can get started right away and don't have to worry about complicated settings. The Godox X1R-N receiver is a reliable companion that will never let you down. Technical details: Radio technology: 2.4GHz Range up to 100 meters Max. sync speed in HSS mode: 1/8000s Batteries: 2xAA each (not included) We recommend using rechargeable batteries Contents: 1 x Godox X1R-N receiver1 x camera cable 1 x 3.5mm jack cable incl. adapter 6.5mm1x user manual (English) without battery

Godox protective cap for clip-on flashes and other devices with Sony Multi-Interface connectorThis protective cap is suitable for clip-on flashes, microphones and other devices with Sony Multi-Interface connector. The protective cap is simply plugged onto the MIS connector of the respective device. It protects the sensitive contacts of the connector from dirt and damage. Thanks to the protective cap, you can safely carry your flash unit or microphone in your pocket or backpack without fear of damaging the connectors of the respective device. Protective cap Compatible with the following devices:Sony HVL-F60M External Flash/Video LightSony HVL-F20M External Flash/Video LightSony ADP-MAA Sony multi-interface shoe adapterNissin i40 Compact Flash for Sony camerasSony ECM-W1M Wireless MicrophoneSony HVL-F32M MI (multi-interface hot shoe) Camera FlashECM-XYST1MGodox V1 for SonyGodox TT685 for SonyGodox V860-2 for SonyGodox V860-3 for SonyGodox Xpro to SonyGodox Xpro-II to SonyGodox X2T to SonyScope of delivery1 x Protective cover Sony from Godox

Godox has fundamentally rethought lighting for macro photography with the MF12 Macro Flash.With this flash head, it is easy to take beautiful and sharp photos of small subjects such as plants, animals and insects from a very short distance. The MF12 can be used in a variety of ways. With the included flash stand, it can be used in very tight spaces. However, the highlight of this flash set is that it can be mounted directly to a lens with a special adapter, and this adapter allows up to six MF12 flash heads to be mounted and positioned individually. As a camera-independent TTL flash, the MF12 can be used with the Godox XPro and Godox X2T. These triggers are compatible with major brand cameras including Nikon, Sony, Canon, FUJIFILM, Olympus and Panasonic.2.4 GHz wireless controlWireless control allows transmission over long distances for more flexibility in your shooting. In addition, 5 groups of 32 channels each help avoid interference and noise when multiple wireless systems operate close to each other.Compact designThe MF12 macro flash is ideal for close-up shooting thanks to its compact design and unique ability to attach directly to the lens via an optional adapter or place around the subject with the included flash stand. Rechargeable batteryThe powerful built-in lithium battery supports approximately 500 full-power flashes with a flash recycle time of 0.01 to 1.7 seconds. This battery can also be easily recharged via an included USB Type-C cable.Color effects and color temperature adjustment kitIncluded with the MF12 macro flash are the MF-11C color effect and MF-11T color temperature adjustment sets. The color effect set includes a selection of colored gel filters to expand your creative options. The Color Temperature Adjustment Set contains a range of gel filters to adjust the color temperature of the flash head. This allows you to match the color temperature of the ambient light no matter where you are shooting.Mounting RingsIncluded in this 2-piece kit are 8 different mounting rings: 49mm, 52mm, 55mm, 58mm, 62mm, 67mm, 72mm, and 77mm.Scope of delivery:2 x MF12 Macro Flash1 x MF-AR mounting ring2 x MF-11C color effect set2 x MF-11T set / color temperature 2 x Extreme close-up positioning adapter 2 x MF12 adapter for cold hot shoe2 x color filter holder2 x Flash stand2 x USB Type-C cable2 x Soft Case for color filter set1 x carrying bagNote: order the matching double loader at the same time