Godox V860 MK3 Kit TTL Camera Flash for Sony

The battery is dead, the charger is at home, and your next shoot is tomorrow morning. Having a second charger in your camera bag solves this problem once and for all. The VC26 charges via USB-C, so it doesn’t need its own power adapter—just a cable that you’re carrying with you anyway. For Godox Li-ion batteries in the VB26 series and the VB30 Charges via USB-C, so you can use a power bank, laptop, or cell phone charger Fully charged in about 3.5 hours LED indicator shows the charge level at a glance Compact enough to fit in the side pocket of a camera backpack Charges without a dedicated power adapter Power comes via USB-C The VC26 doesn’t have its own power plug; instead, it has a USB-C port. This lets you charge it from your laptop, a power bank in your backpack, or your phone’s charger. When traveling, you save on an extra device and an adapter, and in the car, all you need is a USB port. Battery level at a glance An LED shows you whether the battery is still charging or fully charged. That may sound trivial, but it saves you from wondering in the morning before you leave whether the battery really did charge fully overnight. Here’s what it looks like in everyday use A second charger for your backpack Most people buy the VC26 as a second charger that stays in their camera bag at all times. That way, you have one at home at your desk and one in your luggage, and you’ll never leave it on the kitchen table again. Charging in the car between appointments There’s often a forty-minute drive between the wedding ceremony and the reception. With the VC26 plugged into the car’s USB port, the drained battery gets recharged quite a bit, instead of letting the drive go to waste. What you should know before ordering All versions of the VB26 series are compatible Godox has continued to develop the VB26 over the years, which is why the batteries have a suffix letter depending on their generation. This doesn’t matter for the charger—the design has remained the same across all versions. So you can charge both an older and a newer battery in the same device. The VB30 can also be charged with it In addition to the VB26 series, the VC26 also accommodates the VB30, which is used in other Godox flashes. So if you use both series, one charger is all you need—no need to carry around two charging cradles. While the VB30 itself can also be charged directly via USB-C on the battery, the flash remains ready for use while in the cradle. Cable and power adapter are not included The charging cradle is shipped on its own. A USB-C cable and power adapter are not included, since most people already have several of these at home. So plan to use a cable you already have, or let us know when you place your order, and we’ll include one for you. Only one battery at a time The VC26 charges one battery at a time. If you work with three or four batteries and want to charge them all overnight, a multi-battery charger is the better option. You can find the selection in flash accessories. Technical Details at a Glance Compatible Batteries: All versions of the Godox VB26 series, as well as the VB30 Power Supply: USB-C Charging Time: About 3.5 hours for a full battery Display: LED for charge status Capacity: one battery at a time Package Contents 1 x Godox VC26 charger

HC-SP hot shoe cover for Sony multi-interface shoe This protective cap is suitable for clip-on flashes, microphones, and other devices with a Sony multi-interface shoe. The protective cap is simply attached to the MIS connection of the respective device. Once attached, it protects the sensitive contacts of the connection from dirt and damage. Thanks to the protective cap, you can safely transport your flash unit or microphone in your bag or backpack without worrying about damaging the connectors on the device. Special features and advantages Effective protection for the hot shoe in everyday use and when traveling Perfect fit for Sony multi-interface connectors Extends the life of camera connectors Lightweight, compact, and ready for use at any time Discreet design to match the camera body Compatibility Sony HVL-F60M External Flash/Video Light Sony HVL-F20M External Flash Sony ADP-MAA Sony Multi-Interface Shoe Adapter Nissin i40 Compact Flash for Sony Cameras Sony ECM-W1M Wireless Microphone Sony HVL-F32M MI (Multi-interface Shoe) Camera Flash ECM-XYST1M Godox V1 to Sony Godox TT685 to Sony Godox V860-2 to Sony Godox V860-3 to Sony Godox Xpro to Sony Godox Xpro-II to Sony Technical details Material: Plastic Color: Black Weight: approx. 2 g Scope of delivery 1 x HC-SP protective cap from JJC

What's new with the TTL remote release from Godox? It has a revised display and key layout. In addition, the trigger now has Bluetooth and can easily be controlled via smartphone. Photographers can trigger TTL flash units wirelessly with full support for TTL functions. The zoom setting and flash output can of course be controlled remotely. Shooting with external flashes becomes incredibly easy. Say goodbye to manual mode or flash-indicating shutter release or camera settings. The Godox X2T-S unit is a highly reliable, wireless, radio-based TTL shutter release and flash control system. Functions- Radio triggering 2.4GHz flash triggering, TTL and manual- AutoFocus Assistant Light- Remote trigger control for TTL with +/- EV adjustment (3 levels in 1/3 steps - 18 different levels)- Mix TTL and manual flash control, triggers multiple groups with TTL, different from manual mode- High speed synchronisation, shutter speeds up to 1/8000s- Upgradeable via integrated USB port With this system you can trigger either studio flashes or Godox system flashes manually or in TTL mode. Godox X2T-S offers up to 5 flash groups. The flash zoom can be adjusted dynamically. As you adjust your lens, the Godox X2T-S TCU transmits the setting to the flash unit. The flash zoom can also be set manually. The transmitter unit works with a range of up to 100m with two AA/Mignon batteries each. For the technicians:Frequency: 2.4 GHzRange: up to 100mGroup: 5 - A, B, C Channels: 32Wireless ID: 01-99Max Sync Speed: 1/8000sWeight 90gFirmware upgrade via USB connection type C Compatibilityall current Sony cameras which have TTL and the Sony MI flash foot Scope of delivery1x Godox X2T-S TTL transmitter   You can find all the technical details in the Godox X2T to Sony instruction manual in English

Godox CF-07 color filter set for clip-on flashesThe Godox Speedlight CF-07 color filter set is a selection of correction and effect filters for your clip-on flash. The set consists of 7 color filters (5 per color) that attach to the flash head with Velcro. With this set you can quickly and easily use color filters for a variety of effects.FeaturesVelcro fastenerSet of 7 different color filters (5 per color)Size of the filters: 39x80mmIncluded in delivery: 5x 010 color filter medium yellow5x 026 color filter light red5x 079 color filter light blue5x 204 Full CT Orange color filter5x 205 1/2 CT Orange Color Filter5x 206 1/4 CT Orange Color Filter5x 244 Color Filter Full Plus GreenVelcro fastenerFilter Holder

You’re in the middle of a wedding ceremony, your flash stops working, and that moment won’t come again. Having a charged spare battery in your bag is the most affordable way to prepare for exactly this situation. The VB-26 is the same battery already powering your Godox flash and can be swapped out in just a few seconds. For Godox flash units with a VB-26 battery, including the V1, V860III, and Ring 72 3000 mAh capacity, good for about 480 flashes at full power Replacement in the flash takes seconds; no tools required Same design as the standard battery; no adapter required Not to be confused with the VB30, which is designed for other Godox flashes A second battery changes the way you work 3000 mAh for long events About 480 flashes at full power is the lower limit, not the best-case scenario. When using TTL indoors, your flash rarely fires at full power, so you’ll get even more out of it. For an entire event, though, it’s still better to plan with two batteries than with just one that you have to conserve. Swap Instead of Saving If you only have one battery with you, you’ll unconsciously use the flash more sparingly and miss shots. With a second one in your backpack, you don’t have to worry about that. You work until the flash alerts you, swap it out during the next break, and keep going. Here’s what that looks like in everyday life Wedding from the Reception to the Dance A day like this lasts over ten hours, and toward evening in the dark hall, the flash needs the most power. That’s exactly when the first battery runs out. With the spare battery, you can swap it out during the setup instead of in the middle of a speech. Photojournalism Without a Power Outlet On a construction site or out in the field, there’s no time to stop and charge. Two fully charged batteries in your bag will cover a full workday without you having to worry about the order of your shots. What You Should Know Before You Order Godox Makes Two Similar Batteries The VB-26 and VB30 look similar but aren’t interchangeable. The VB30 is used in the V1Pro, the V100, and the MF-T76 macro flash, among others. To be sure, check the battery currently in your flash—the model number is printed on it. If you’re unsure, give us a call—we can clear this up in two minutes. You can find the battery from the other series in Flash Accessories. The versions of the VB26 series are compatible Godox has continued to develop the battery over the years, which is why you’ll see model numbers with an appended letter. The versions differ in capacity but are identical in design and work with the same flash unit and charger. So you can easily use a newer battery alongside an older one without having to replace your charger. The runtime depends on the specific battery. It requires a charging cradle, even the latest version The VB-26 does not have its own USB port in any of its versions. So you always charge it in a charging cradle and not directly via the battery itself, unlike the VB30 from the other Godox series. If you already have the charger from your first battery, you don’t need anything else, since it works with all versions in the series. If you want to charge multiple batteries at once, you’ll find chargers for three batteries simultaneously in the flash accessories. Technical Details at a Glance Cell Type: Lithium-ion Voltage: 7.2 volts Capacity: 3000 mAh, 21.6 Wh Flashes per charge: approximately 480 at full power, depending on the flash unit Package Contents 1 x Godox VB-26 Li-Ion battery

Godox protective cap for clip-on flashes and other devices with Sony Multi-Interface connectorThis protective cap is suitable for clip-on flashes, microphones and other devices with Sony Multi-Interface connector. The protective cap is simply plugged onto the MIS connector of the respective device. It protects the sensitive contacts of the connector from dirt and damage. Thanks to the protective cap, you can safely carry your flash unit or microphone in your pocket or backpack without fear of damaging the connectors of the respective device. Protective cap Compatible with the following devices:Sony HVL-F60M External Flash/Video LightSony HVL-F20M External Flash/Video LightSony ADP-MAA Sony multi-interface shoe adapterNissin i40 Compact Flash for Sony camerasSony ECM-W1M Wireless MicrophoneSony HVL-F32M MI (multi-interface hot shoe) Camera FlashECM-XYST1MGodox V1 for SonyGodox TT685 for SonyGodox V860-2 for SonyGodox V860-3 for SonyGodox Xpro to SonyGodox Xpro-II to SonyGodox X2T to SonyScope of delivery1 x Protective cover Sony from Godox

Godox Xpro II Wireless Flash Remote Trigger to Sony The XPro II TTL wireless flash trigger is designed to work with the Godox X wireless 2.4 GHz system, providing effective and reliable flash triggering up to 100 meters away. This updated model is compatible with the Sony TTL system, including support for high-speed sync up to 1/8000 second, and offers advanced control options for working with system-specific functions. For maximum reliability and control, you can set up 16 groups on one of 32 channels, then access 99 wireless ID settings to limit interference with other nearby systems. In addition, this wireless shutter now features Bluetooth connectivity for remote operation with the Godox APP. Simply download the GodoxPhoto app to a compatible iPhone or Android smartphone or tablet, and you can remotely adjust flash mode, power, modeling light, high-speed sync, and more. In addition to the basic manual and TTL control modes, other settings are also available, including strobe flash and second-curtain sync. You can set flash exposure compensation from -3 to 3 EV and wirelessly control modeling light, zoom setting, and more. Compatible with the Godox X 2.4 GHz wireless radio system, these are eg. Godox AD200ProGodox AD300ProGodox Witstro AD400ProGodox Witstro AD600ProGodox AD1200proGodox flash generator P2400Godox V1 to Nikon (also Godox V1 flashes to other brands)Godox V860-III to Nikon (also Godox V860 III flashes to other brands)Godox TT685-II to Nikon (also Godox TT685 II flashes to other brands). Technical features: Effectively and reliably triggers flashes up to 100 meters awaySupports high-speed synchronization up to 1/8000 second16 groups on 32 channels with access to 99 wireless ID settingsStroboscopic flash and second curtain synchronizationAdjusts flash exposure compensation from -3 to +3 EVControl of modeling light, zoom setting and moreBluetooth connectivity for remote control via the GodoxPhoto app2.5mm sync port supports triggering via wired connectionUSB Type-C port for firmware updatesOperates on two AA batteries for added convenience What makes version 2 different from version 1 of the Xpro in detail? Improved compatibility for mirrorless camerasNew flip-lock mounting mechanismStorage of user settings in 5 different memory locations for later recallNew individual modeling lamp control (adjust modeling lamp for each light separately in proportional and percentage)Firmware update via USB-C to PC or Mac with Godox V3 UtilityChannel scan function (scan your location for the least interference)New Sekonic L-858 integration (trigger your lights via Sekonic L858 meter).Improved TCM function (convert TTL flash exposures to manual power settings, now with more supported Godox flash units)New menu interface Scope of delivery: 1 x Godox Xpro-II to Sony   You can find all the technical details in the Godox XproII to Sony instruction manual in English

If you use a flash regularly, you’ll eventually end up with three or four batteries in rotation. After an event, they’re all dead, and you end up plugging them into the same charger one after another, turning your evening into a charging session. The VC26T charges three batteries at once and is ready by morning, without you having to switch them out overnight. Charges three Godox batteries simultaneously: VB26 series and VB30 Fully charged in about 1.4 hours—significantly faster than a single charging tray Operates on 100 to 240 volts, so it works abroad too Power cord included; ready to use right out of the box One device instead of three charging cradles and three cables For frequent flash users with multiple batteries in rotation Three batteries, one device, one outlet Simultaneously instead of one after another Three slots mean you can plug everything in after the event and not have to worry about it anymore. If you use single-battery chargers, you have to switch them out twice—and experience shows you’ll never get the timing right. Either way, everything’s fully charged by morning—just without the overnight shift. About 1.4 hours per cycle The device charges noticeably faster than a simple USB charger. If you return from your first appointment in the afternoon and have to head out again in the evening, the break in between is enough time to charge a full set of batteries. Here’s what it looks like in everyday life Wedding season with appointments on consecutive days During peak season, you have one event on Saturday and one on Sunday. On Saturday night, you put all the batteries in the VC26T; on Sunday morning, you pack a full set. Without a multi-charger, it turns into a game of math figuring out which battery goes in when. Traveling with a single outlet in your hotel room In hotels, outlets are scarce and usually already occupied by a laptop and cell phone. One device for three batteries instead of three individual chargers solves this problem, and since it operates from 100 to 240 volts, you only need the plug adapter for your destination country. What You Should Know Before Ordering Accommodates Both Godox Series The slots fit both the VB26 series and the VB30. Godox has continued to develop the VB26 over the years, adding a letter to the model name depending on the generation, while the design has remained the same. This means you can use older and newer batteries together. If you’re using flashes from both series, this single device covers everything. It’s only worth it starting with the third battery If you’re working with one or two batteries, a single charging tray is sufficient and takes up less space in your luggage. The VC26T really shows its strength when three batteries regularly run out at the same time. You can find individual charging cradles in the flash accessories. Technical Details at a Glance Compatible batteries: Godox VB26 series (all versions) and VB30 Capacity: three batteries at once Input: 100 to 240 volts via IEC power cord Output: 8.4 volts, 1.35 A Charging time: approximately 1.4 hours Package Contents 1 x Godox VC26T charger 1 x IEC power cord

Godox TR-S TTL Hot Shoe Riser Sony – More freedom when using flash The Godox TR-S TTL Hot Shoe Riser Sony is a practical accessory that offers you more flexibility and stability when using your camera and flash units. The hot shoe riser raises the hot shoe, ensures optimal positioning, and expands the possibilities in your creative workflow. Advantages of the Godox TR-S TTL Hot Shoe Riser Sony The riser was specially designed for Sony cameras and allows for even more comfortable handling. Thanks to the raised position of the hot shoe, even larger lenses can be used without any problems and without shadows or interference. The most important advantages at a glance: Optimal height: Prevents shadows from large lenses. Sturdy consTR-Suction: High-quality materials guarantee long-lasting use. TTL support: Ensures fast and precise flash conTR-Sol. Easy installation: Quickly attaches to the hot shoe of your Sony camera. Compact design: Ideal for mobile use. Who is the Hot Shoe Riser suitable for? If you regularly work with external flash technology and want more flexible flash positioning, this riser is the right choice for you. You will benefit from the increased flash position, especially when shooting porTR-Saits, events, or products. Workmanship and design The Godox TR-S TTL Hot Shoe Riser Sony features a solid metal consTR-Suction with precise connections. Its compact dimensions allow for easy TR-Sansport in any camera bag. Thanks to its well-thought-out design, your camera remains comfortable to handle at all times. Practical applications With the Hot Shoe Riser, you can: Avoid annoying lens shadows Place your flash in a better shooting position Ensure precise TTL exposure conTR-Sol Expand the versatility of your camera setup Whether in the studio or on the go, the riser always offers you the flexibility you need. Scope of delivery The Godox TR-S TTL Hot Shoe Riser Sony comes with: Godox TR-S TTL Hot Shoe Riser Sony Conclusion The Godox TR-S TTL Hot Shoe Riser Sony is an indispensable accessory for photographers who value precise flash positioning, reliable technology and maximum flexibility. With its high-quality workmanship and well-thought-out functionality, it will quickly become an integral part of your photography equipment.

Softbox large for clip-on flashes RSB-L This large softbox creates even and soft light with your flash unit - hard shadows are a thing of the past. With this Sofbox you provide ideal illumination and eliminates störende flash reflections. The inner walls are coated with a reflective surface and ensure an even light dispersion.The attachment of the softbox über an elastic band, which is wrapped around the flash unit. The rubberized inside of the straps prevents the box from slipping on the system flash.The advantages at a glance: Large softbox for clip-on flashes. Easy to attach via Velcro - fits almost all flash units Illuminated area: 320 x 195 mm Mass HxWxD: 330 x 205 x 18 mm Robust materialFits many clip-on flash units: (list not exhaustive). Godox TT350, V350, TT685 I +II, V860 II + III Canon Speedlite 600EX 580EX I+II, 550EX, 540EZ, 520EZ, 430EX I+II, 420EX, 420EZ, 380EX Nikon Speedlight SB-900 SB-800, SB-700, SB-600, SB-28, SB-26, SB-25, SB-24 Sony HVL-58AM, HVL-56AM Nissin Di866, Di622 Yongnuo YN-560 II, YN-560 III, YN-565, YN-568Scope of delivery 1x Softbox 20x33 cm clip-on flashes RSB-L

Godox AK-R25 adapter to square clip-on flash headThe AK-R25 adapter holder for square flash heads allows you to use a square Godox flash head with the AK-R21 projection attachment. Key features:Adapts square flash heads to the AK-R21 projection attachment.Scope of delivery:1 x Godox AK-R25 Square Flash Head Adapter Holder to AK-R21 Projection Attachment.