Camera Cable-C like Canon RS-60 E3 from JJC

SmallRig Camera Cage for Canon EOS R8  The camera accäfig f for the Canon EOS R8 is a snug-fitting Käfig that fully encloses the camera. Thus, it offers protection and support for matching accessories for your Canon EOS R8. The grip experience on the hull is improved.   With the help of this camera acäfig you can mount accessories like monitor, microphone, light and handles firmly to the camera. The Käfig features üseveral 1/4-inch 20-lücher and 3/8-inch 16-positioning lücher for ARRI, which include the 3765 top handle, the side handle 2093C , the  Monitor holder 2903 And the Magic Arm 3875 can support t. A microphone and LED video light can be attached to the top cold shoe mount. On the left side is the NATO rail, to which side handles can be mounted. The Käfig is equipped with a "cold" ISO flash shoe, this allows a quick change of accessories. The lower Arca-Swiss quick-release plate accepts Arca tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals and allows quick switching between gimbal, handheld and tripod shooting.   The Käfig locks the camera üvia a lower 1/4-inch 20 screw and two side locking adapters. Integrated rubber pads protect the camera from scratches. Even after mounting the camera fig you ll have unrestricted access to buttons, card slots, flip screen and battery compartment.  Note: Before you install the Käfig, you had to please remove the side locking adapter.   A double-sided screw key is included to facilitate disassembly and assembly. The advantages at a glance: Specially for the Canon EOS R8 constructed. Compatible with the Arca-Swiss clamping system Can be used directly on gimbals from DJI For the technicians: Product dimensions: 148.1 x 60.3 x 103.0 mm Product weight: 140.0 ± 5.0g Material(s): aluminum alloy Suitable for the following camera: Canon EOS R8  Scope of delivery: 1 x Camera accäfig suitable for Canon EOS R8 

The most advanced and flexible camera Interval shutter release for fast motion The LRTimelapse Pro Timer 3 is one of the most advanced and flexible camera interval triggers for time-lapse and astro-photographers. It has been developed by Gunther Wegner, one of the pioneers of time-lapse photography "Made in Germany" and is especially designed for the needs of professionals and demanding amateur photographers.The LRT Pro Timer is a small and lightweight interval shutter release with built-in Li-ion battery, which can be charged via USB and lasts up to 20 hours. It features a razor-sharp OLED display that is readable in all conditions and a single button for easy and ergonomic operation - even in the dark and with gloves on. It can trigger two cameras at the same time, allows time-controlled and periodic recording, offers special support for mirrorless cameras, a flashlight function for foreground illumination and above all: it enables the shortest possible black times. This means that the camera can be operated while recording!Intervals can be set in steps of 0.1 seconds. Interval ramping allows during recording a continuous adjustment of the interval over an adjustable period of time - also in combination with motion control hardware. Optionally, the camera can be operated in bulb mode (astro-photography) for time-lapse and single exposures. The lighting of the timer can be switched off completely - essential for shots in the dark. Default values for interval, number of exposures etc. can be stored in the LRT Pro Timer settings.The integrated real time clock allows time-controlled exposures and periodic exposures at certain times of the day. The LRT Pro Timer has a small and light-weight housing, which can be attached directly to the camera's hot shoe in two different angles, alternatively with corresponding eyelets, also on a tripod.The release cable for the respective camera is not included. It is a standardized cable that must be purchased separately if required. Suitable cables can be found here in our store. Compared to its predecessor, the LRT Pro Timer 3 offers a larger display (double resolution, almost three times the size), a cover made of optical precision glass to protect the display, a stylish aluminum knob for more precise settings and haptic indicators for the camera port numbers on the housing. The LRT Pro Timer works with any camera for which a standard release cable is available (DSLR / DSLM, Nikon, Canon, Sony, Fuji, Olympus, Leica and many others). Technical specifications: - CE Certification- Fast ATSAMD21 Cortex M0 processor, - 128 x 64 pixel black and white OLED display, shielded by a precision optical glass cover.- Built-in 500 mAh LiPo battery (can be upgraded to 800 mAh by the user), which can be charged via Micro-USB.- Battery powered real time clock (CR1220 button cell).- 2 camera connectors with standardized 2.5 mm jack sockets (3-pin).- 2 flash shoes on the housing at different angles for direct mounting on the camera.- 2 eyelets on the housing for passing a cord or Velcro tape through for mounting on a tripod.- Tested temperature range: -20 ° C - + 40 ° C - Do not leave the timer in a car exposed to direct sunlight. It is best to store the LRT Pro Timer in a backpack in very cold conditions to avoid discharging or damaging the battery by cold.- Intervals from 0.3 seconds to 12 hours- Interval steps: 0.1 seconds or even 0.01 seconds if required.- Number of shots: 1 to unlimited- Bulb time for single exposure up to 24 hours, bulb time for time-lapse shots maximum (interval 1 sec.).- Operating time with fully charged battery approx. 20 hours, approx. 20,000 releases Interval: 4 seconds, display switched on).- Firmware updates via UF2 files, by copying the firmware file to a drive which is provided after connecting the timer to a computer (PC or Mac). The timer must be set to update mode by double clicking the reset button.- Although the optical glass cover of the LRT Pro Timer 3.0 provides good protection, the LRT Pro Timer is not waterproof. Please do not operate the device in rain or expose it directly to water.- Size (incl. rotator): 83 x 43 x 29 mm- Weight (including battery): 67 g- Packaging size: 135 x 89 x 35 mm- Weight incl. packaging: 107g*) For cameras that do not require AF signal. By default the minimum shutter speed is calculated as (shutter release time + AF_time + 50ms) rounded up to the next 100ms. By default this is 0.4 seconds. For cameras that do not require an AF signal to be sent before release, you can set the AF time to 0 in the settings. The minimum interval is then 0.3 seconds. Please note that most cameras are not able to record such short intervals. Attention: Li-Ion battery is installed; camera connection cables are NOT included in the scope of delivery can be found here in the store!   Further information can be found at https://lrtimelapse.com/lrtpt/.