Godox AD-S60S Octa Softbox inside silver

Godox fabric diffuser suitable for AD-S60 Replacement diffuser for a lost fabric diffuser suitable for the following softboxes: Godox AD-S60S softbox Scope of delivery: 1 x fabric diffuser for AD-S60

Godox ML30 Video Light Daylight   With this permanent light you acquire a lightweight and compact always-on light for photography and video lighting. LED lights have been installed, which promise a high CRI and TLCI value, which ensures an extremely good color rendering. The ML30 light is dimmable from 0 to 100% and has an active, yet quiet fan that ensures the ideal temperature inside the unit during prolonged use. So it can't overheat. You can even use it to create over eight lighting effects such as flash, conference, paparazzi, TV and broken light bulb. You can use the ML30 anywhere in the world, it runs on 100 to 240V thanks to the included power adapter. If you don't have AC power, you can also run it with two NP-F970 batteries. The advantages at a glance: Ultra-quiet active fanOptional remote controlAC or optional battery power12 lighting FX For the technicians: Color temperature 5,600K ± 200KColor accuracy standard CRI 96TLCI 97Cooling system fan activePower control: 0 to 100%.Power: 8590 Lux at 1 m, with reflectorDimension: 120,0 x 88,0 x 88,0 mmWireless channels / groups 32 / 16AC input power 100 to 240 VAC, 50 / 60 HzDC input power 16.8 / 16.8 VDC at 4.2 APower source AC adapter, external battery 2 x Sony L-series (NP-F)Maximum power consumption 37.6 WCable length 5 m Scope of delivery: 1x Video light ML301x handle1x Battery box BC601x reflector with Godox connection1x lamp protection1x power cable approx.5 m1x DC cable approx. 1.5 m1x connection cable approx. 0.2 m   You can find all the technical details in the Godox ML30 instruction manual in English

Finally a continuous LED light that doesn't eat half your camera bag. The Godox ML60IIBi runs at a solid 60 watts, flips between warm studio light and daylight, and fits in any kit–even as a clip-on module behind the lens. 60 Watt LED continuous light, Bi-Color (2800 to 6500 K) Compact and lightweight – no space hog in your kit CRI/TLCI over 95 – accurate colour, no colour grading needed Tilt joint and mounting for tripod or camera Powered via USB-C or optional battery pack (NP-F series) Real light that goes everywhere 60 watts that work The ML60IIBi is not a toy fill light. At 60 watts it lights a face at distance, plays well with a key light, or shines through a window–whatever you need. And it stays rock solid, never flickers. Pick your colour, not your kit Warm for portraits, daylight for outdoors, anything in between at a dial–all without two fixtures and without busting your bag. One light, one colour wheel. Colour is right from the start Instead of grading everything in Davinci later: the ML60IIBi ships calibrated to CRI/TLCI over 95. Your grade lives in camera. How this works in practice Portrait without the rig Drop the ML60IIBi in a tabletop stand, set the colour to your mood, and done–no mixer, no cable mess, no second PA. Shoot in an hour, colour locked in the edit. Fill light on every job When the sun is wrong or the window too small: slip the ML60IIBi into a stand, a ring-flash adapter, or a camera clip–and the colour matches your main light instantly. What to know before you order 60 watts works for – Solid key or fill light at close to mid range, pocket light for video, clip-on module for run-and-gun–not as a key light for high-speed work at f/1.4 from 30 feet away. For that, reach for strobes. Bi-Color means no RGB You dial between warm and daylight–everything in between is a blend. No colour effects like the ML100R. Need neon blue or green haze, that's a different light. No power supply in the box The head runs off USB-C–any modern power bank or laptop charger works. NP-F batteries slot on optionally (just clip, no fuss). Technical specs at a glance Output: 60 Watt LED Colour temperature: 2800 to 6500 K (Bi-Color) Colour accuracy: CRI/TLCI over 95 Power: USB-C or NP-F battery (optional) Mount: tilt joint, hot shoe, tripod thread Size: compact, lightweight, bag-friendly In the box 1 x Godox ML60IIBi LED continuous light Mounting hardware (joint, shoe) Optional: Diffuser / reflector (softbox function) NP-F battery and holder Tripod (not included)