Godox QT600III M Studio Flash 600 Ws

Your Godox QT400II or QT600II fires weaker, unevenly or not at all, even though the electronics are fine. Usually the flash tube is worn out. This matching replacement part gets the studio strobe back to full power quickly. Replacement flash tube for Godox QT400II and QT600II Colour temperature 5600 K User replaceable by pulling out and plugging in A sensible spare for the studio A wear part worth keeping in stock For the QT II range The tube is designed for the QT400II and QT600II. Replacement is done by pulling out the old tube and plugging in the new one. How the change works Switch the strobe off, disconnect it from power and wait until the protective dome and tube are cold. Carefully remove the dome, unwind the trigger wire from its holder and pull the tube out. Support the new tube by its legs, push it in, wind the trigger wire back on and refit the dome. How this works in practice A spare for the studio If you use the QT400II or QT600II for booked jobs, keep a spare tube ready. If it fails during work, you swap it and carry on. What you should know before you order For QT400II and QT600II only This tube fits the QT400II and QT600II. The newer QT III range or other studio strobes need their own matching tube. Handle it cleanly When changing the tube, handle it only with clean cotton gloves or a microfibre cloth. Fingerprints burn into the glass and shorten its life. Only helps with a faulty tube If the strobe no longer responds electronically, the tube is not the cause. Contact us first before ordering the wrong part. Technical details at a glance Colour temperature: 5600 K Compatible with: Godox QT400II, QT600II Replacement: pull out and plug in, user replaceable Scope of delivery 1 x Godox flash tube for QT400II and QT600II

Your Godox studio strobe from the QT IIIM range fires weaker, unevenly or not at all, even though the electronics are fine. Usually the flash tube is worn out. This matching replacement part gets the studio strobe back to full power quickly. Replacement flash tube for Godox QT400IIIM, QT600IIIM and QT1200IIIM Daylight balanced, 5600 K User replaceable A sensible spare for the studio A wear part worth keeping in stock For the QT IIIM studio strobes The tube is designed for the QT400IIIM, QT600IIIM and QT1200IIIM studio strobes. It is daylight balanced and offered as a replacement or spare. Swap it yourself instead of sending it in The tube is user replaceable. You save the service route and have the strobe ready again the same day. How this works in practice A spare for the studio If you use a QT IIIM strobe for booked jobs, keep a spare tube ready. If it fails during work, you swap it and carry on. What you should know before you order For the QT IIIM range only This tube fits the QT400IIIM, QT600IIIM and QT1200IIIM. Older QT II models or other studio strobes need their own matching tube. Take care when changing it Switch the strobe off, disconnect it from power and let the tube and protective glass cool. Handle the glass only with gloves or a cloth, as fingerprints burn in. Only helps with a faulty tube If the strobe no longer responds electronically, the tube is not the cause. Contact us first before ordering the wrong part. Technical details at a glance Colour temperature: 5600 K (±200 K) Compatible with: Godox QT400IIIM, QT600IIIM, QT1200IIIM Replacement: user replaceable Scope of delivery 1 x Godox flash tube FT-QT

Improve your light control with the Godox BFP flash projection attachment The Godox BFP flash projection attachment is a ground-breaking solution for photographers like you who want more precise control of the flash light for your Studio flashes with Bowens connection search. With its 360° rotatable design, this attachment allows for easy fine-tuning of projection patterns to suit your creative vision.Versatility with EF lens mount The Godox BFP flash projection attachment comes with an 85 mm lens and offers a variety of lighting options. Thanks to its EF lens mount, the BFP is compatible with a wide range of lenses to meet your individual requirements and expand your creative possibilities.Precise light shaping with adjustable blades With its four adjustable blades, the BFP makes it easy to create precise shapes such as triangles, squares and rectangles. This flexibility opens up a multitude of creative possibilities to shape the light according to your wishes and achieve unique visual effects.Effective heat management for optimum performance The Godox BFP flash projection attachment is equipped with an advanced heat management system that provides multiple vents for impressive heat dissipation. In addition, heat-insulating covers provide effective protection against burns, so you can focus on your photography without worrying about heat build-up.The features of the Godox BFP at a glance:  85mm optical projection lensEF lens mount360° rotatable designFour adjustable slatsThe technical features of the Godox BFP: Color: blackDimensions: 232 x 220 x 220 mmWeight: 1.3 kgBowens connectionConnection is interchangeable, optionally available Godox SA-GD / SA-BR and SA-PFScope of delivery 1x Godox BFP flash projection attachment for Bowens 1 x optical projection lens 85 mm 1 x MLP-GS gobo set 1 x color effect clip 1 x gobo holder 1 x carrying bagConclusion on the Godox BFP The Godox BFP flash projection attachment is the ideal solution for photographers like you who need precise light control and versatile lighting options. With its innovative design, precise light shaping and effective thermal management, the BFP offers all the features you need to bring your creative vision to life and create stunning images.