Jinbei EF-RC LED ligth remote controller

BiColor surface luminaire with 4500 Lux on 1m from Jinbei The EFP-50BI Led area light with low power LEDs is ideal for photography or video lighting. Due to its high illuminance, flexible controllability and expandability, the EFP-50BI is the perfect lighting solution especially in the studio. The area light has 700 high-power LEDs, which achieve a high illuminance of 4500 lux at a distance of one metre. The wide beam angle of 50 degrees results in uniform illumination without light spots. Using the rotary control on the rear of the surface area luminaire, the light output can be adjusted continuously between 1-100 percent and the colour temperature between 2700 and 7500 Kelvin.vThe EFP-50BI is supplied with a milk filter, which can be attached to the surface area luminaire with magnets as a diffuser. With the filter in place, the individual LEDs become blurred and the result is uniform lighting, with a glare-free and diffuse light that is comparable to the effect of a softbox. For power supply, the EFP-50BI SE is equipped with two Sony NP-Fxx slots so that common NP-Fxx batteries and chargers can be used. Light duration: The Jinbei EFP-50 BiColor Led surface light can be operated for approximately 120 minutes on Jinbei NP-F970 battery with 6600mAh from Jinbei at 100% power 5600K. For the technicians: Colour temperature: 2700 - 7500 KelvinIlluminance: 4500 lux at 1 metreColour rendering index: >97 RaDimmability: 1-100 percentPower supply: NP-Fxx batteries or mains adapter (100-240 Volt, 50/60Hz)Dimensions: 55 x 270 x 320 mm (height x width x depth)Weight: 1.35 kg (without battery)Colour: BlackRemote control Jinbei EF-RC is optional and can be found here Scope of delivery 1 Jinbei EFP-50BI surface luminaire1 milk filter1 IEC plug / power supply unit1 spigot holder Notes A battery or charger is not included in the scope of delivery and must be purchased separately. We recommend the JB-260 lamp tripod or the Jinbei 2600FP air-cushioned version for the area light.