Photographic Solutions Eclipse Optic Cleaning Fluid 15 ml for Sensor, Lens and Filter

An ordinary blower pulls in surrounding air, dust and all, and fires it straight at your sensor. The Orbit works differently: incoming air passes through a filter, one-way valves at both ends stop dirt from flowing back, and the ionising silicone bulb helps loosen statically attached particles. Blower with NIOSH-rated filter for clean air One-way valves at both ends Ionising silicone bulb against static-bound dust According to the manufacturer, used by NASA on the ISS for instrument sensors Dust gone without touching the sensor Filtered air, not a dust cannon The filter holds back particles from the incoming air before they reach the nozzle. You blow dust off the sensor instead of blowing new dust onto it. Helps with statically attached particles Dust held to the sensor by static is hard to shift with plain air. The ionising silicone bulb helps neutralise that charge so the particles blow away more easily. How this works in practice The first step of every clean Before any swab or cloth touches your optics, the Orbit comes first. Hold the camera mount facing down, give the sensor a few firm puffs, and loose dust falls out. Often that's all the cleaning you need. Not just for cameras The Orbit also works for lenses, filters, scanners, telescopes, microscopes and VR headsets. What you should know before you order Oil needs a wet clean A blower removes loose and static-bound dust. Oil spots or stuck particles stay, and for those you need Sensor Swab Ultra with Eclipse or Aeroclipse. Never put the nozzle inside the camera Keep the nozzle just in front of the mount and don't touch the sensor or shutter with it. On DSLRs, lock the mirror up via the cleaning mode first. Technical details at a glance Type: filtered blower Filter: NIOSH-rated, high flow Valves: one-way valves at both ends Bulb: ionising silicone Use: sensors, lenses, filters, scanners, telescopes, microscopes, VR headsets Scope of delivery 1 x Photographic Solutions Orbit HEPA blower

When the blower no longer does the job and the spots in the sky stay put, your sensor needs a wet clean. At 17 mm, Sensor Swab Ultra Type 2 is matched exactly to APS-C and Micro Four Thirds sensors, individually sealed and made of lint-free material that lifts oil and stuck-on dust in one pass. 12 individually sealed swabs for wet cleaning APS-C and Micro Four Thirds sensors Width 17 mm (Type 2) Clean-room sealed, lint-free, with a textured surface and end points for cleaner corners Guaranteed safe for sensor coatings, according to the manufacturer A clean sensor in one pass The right width, no second wipe At 17 mm the swab covers the full height of a APS-C and Micro Four Thirds sensor: drag one side firmly across the sensor, then come back with the clean side. The textured surface picks up the dirt instead of pushing it to the edge, and the end points reach into the corners. Clean until you use it Every swab is sealed in its own clean-room package, so you don't bring fresh dust onto the sensor, even after the box has ridden around in your bag for months. How this works in practice Before an important job Test shot against a blue sky at f/16, and the spots show. Two drops of Eclipse or Aeroclipse on the swab, one pass across the sensor, new test shot. You're ready in five minutes without sending the camera away for days. Fits your camera Type 2 is designed for Fujifilm X series, Sony A6000 series, Canon APS-C (EOS R7, R10, R50 and EOS DSLRs), Nikon DX (D3000 to D5600), Olympus OM-D and Panasonic Lumix G. What you should know before you order Check the width A swab that's too narrow leaves streaks, one that's too wide won't fit the sensor well. For full frame you need Type 3 (24 mm), for APS-H and older pro Nikon DX bodies Type 1 (20 mm). If in doubt, check the Photographic Solutions swab chart. Fluid sold separately, one swab per clean The swabs come dry, so you also need Eclipse or the non-flammable Aeroclipse. Each swab is single-use. On cameras with a moving sensor (IBIS), switch to cleaning mode or lock the sensor first. Technical details at a glance Type: sensor swabs for wet cleaning Type 2, width 17 mm Sensor format: APS-C and Micro Four Thirds Contents: 12 swabs, individually sealed Single use, welded seams, channeled handle Scope of delivery 12 x Photographic Solutions Sensor Swab Ultra Type 2 (17 mm)

Haida 7-In-1 Optic Cleaning Kit - Perfect care for your optics Do you want to keep your photographic equipment in top condition? The Haida 7-In-1 Optic Cleaning Kit is the ideal solution! Whether for lenses, filters or camera housings, with this versatile set you are perfectly equipped to effectively remove dirt, dust and fingerprints and extend the life of your optics. Three key features: Comprehensive cleaning: With seven high-quality tools, you can effortlessly clean even hard-to-reach areas such as the corners and edges of your camera Gentle and effective: The specially developed cleaning elements ensure streak-free cleanliness without damaging sensitive surfaces. Compact and practical: The set is light and handy – ideal for when you're on the go, so you're always prepared for anything. Technical features Antistatic cleaning brush Microfiber cloth for streak-free results Bellows for removing dust Special cleaning cloth for lens coatings Contents 1 x bellows1 x Sensorswab APC-C1 x full-frame Sensorswab1 x cotton cleaning swab1 x 2-in-1 lens cleaning pen1 x pre-moistened cleaning cloth1 x microfiber cleaning cloth With the Haida 7-In-1 Optic Cleaning Kit, your equipment will always be ready for use – simple, effective and professional!

When the blower no longer does the job and the spots in the sky stay put, your sensor needs a wet clean. At 24 mm, Sensor Swab Ultra Type 3 is matched exactly to Full Frame sensors, individually sealed and made of lint-free material that lifts oil and stuck-on dust in one pass. 12 individually sealed swabs for wet cleaning Full Frame sensors Width 24 mm (Type 3) Clean-room sealed, lint-free, with a textured surface and end points for cleaner corners Guaranteed safe for sensor coatings, according to the manufacturer A clean sensor in one pass The right width, no second wipe At 24 mm the swab covers the full height of a Full Frame sensor: drag one side firmly across the sensor, then come back with the clean side. The textured surface picks up the dirt instead of pushing it to the edge, and the end points reach into the corners. Clean until you use it Every swab is sealed in its own clean-room package, so you don't bring fresh dust onto the sensor, even after the box has ridden around in your bag for months. How this works in practice Before an important job Test shot against a blue sky at f/16, and the spots show. Two drops of Eclipse or Aeroclipse on the swab, one pass across the sensor, new test shot. You're ready in five minutes without sending the camera away for days. Fits your camera Type 3 is designed for Sony A7 and A9, Canon EOS R5, R6, 5D and 6D, Nikon Z5, Z6, Z7 and D800 to D850, and Panasonic Lumix S. What you should know before you order Check the width A swab that's too narrow leaves streaks, one that's too wide won't fit the sensor well. For APS-C and Micro Four Thirds cameras Type 2 (17 mm) is right, for medium format Type 4 (33 mm). If in doubt, check the Photographic Solutions swab chart. Fluid sold separately, one swab per clean The swabs come dry, so you also need Eclipse or the non-flammable Aeroclipse. Each swab is single-use. On cameras with a moving sensor (IBIS), switch to cleaning mode or lock the sensor first. Technical details at a glance Type: sensor swabs for wet cleaning Type 3, width 24 mm Sensor format: Full Frame Contents: 12 swabs, individually sealed Single use, welded seams, channeled handle Scope of delivery 12 x Photographic Solutions Sensor Swab Ultra Type 3 (24 mm)

When the blower no longer does the job and the spots in the sky stay put, your sensor needs a wet clean. At 20 mm, Sensor Swab Ultra Type 1 is matched exactly to APS-H sensors, individually sealed and made of lint-free material that lifts oil and stuck-on dust in one pass. 12 individually sealed swabs for wet cleaning APS-H sensors Width 20 mm (Type 1) Clean-room sealed, lint-free, with a textured surface and end points for cleaner corners Guaranteed safe for sensor coatings, according to the manufacturer A clean sensor in one pass The right width, no second wipe At 20 mm the swab covers the full height of a APS-H sensor: drag one side firmly across the sensor, then come back with the clean side. The textured surface picks up the dirt instead of pushing it to the edge, and the end points reach into the corners. Clean until you use it Every swab is sealed in its own clean-room package, so you don't bring fresh dust onto the sensor, even after the box has ridden around in your bag for months. How this works in practice Before an important job Test shot against a blue sky at f/16, and the spots show. Two drops of Eclipse or Aeroclipse on the swab, one pass across the sensor, new test shot. You're ready in five minutes without sending the camera away for days. Fits your camera Type 1 is designed for Canon EOS-1D Mark III and Mark IV (APS-H) and older pro Nikon DX bodies such as the D2X, D200 or D300. What you should know before you order Check the width A swab that's too narrow leaves streaks, one that's too wide won't fit the sensor well. For most current APS-C cameras Type 2 (17 mm) is right, for full frame Type 3 (24 mm). If in doubt, check the Photographic Solutions swab chart. Fluid sold separately, one swab per clean The swabs come dry, so you also need Eclipse or the non-flammable Aeroclipse. Each swab is single-use. On cameras with a moving sensor (IBIS), switch to cleaning mode or lock the sensor first. Technical details at a glance Type: sensor swabs for wet cleaning Type 1, width 20 mm Sensor format: APS-H Contents: 12 swabs, individually sealed Single use, welded seams, channeled handle Scope of delivery 12 x Photographic Solutions Sensor Swab Ultra Type 1 (20 mm)

When the blower no longer does the job and the spots in the sky stay put, your sensor needs a wet clean. At 33 mm, Sensor Swab Ultra Type 4 is matched exactly to Medium Format sensors, individually sealed and made of lint-free material that lifts oil and stuck-on dust in one pass. 12 individually sealed swabs for wet cleaning Medium Format sensors Width 33 mm (Type 4) Clean-room sealed, lint-free, with a textured surface and end points for cleaner corners Guaranteed safe for sensor coatings, according to the manufacturer A clean sensor in one pass The right width, no second wipe At 33 mm the swab covers the full height of a Medium Format sensor: drag one side firmly across the sensor, then come back with the clean side. The textured surface picks up the dirt instead of pushing it to the edge, and the end points reach into the corners. Clean until you use it Every swab is sealed in its own clean-room package, so you don't bring fresh dust onto the sensor, even after the box has ridden around in your bag for months. How this works in practice Before an important job Test shot against a blue sky at f/16, and the spots show. Two drops of Eclipse or Aeroclipse on the swab, one pass across the sensor, new test shot. You're ready in five minutes without sending the camera away for days. Fits your camera Type 4 is designed for Fujifilm GFX and Hasselblad X. What you should know before you order Check the width A swab that's too narrow leaves streaks, one that's too wide won't fit the sensor well. For full frame Type 3 (24 mm) is right, for APS-C Type 2 (17 mm). If in doubt, check the Photographic Solutions swab chart. Fluid sold separately, one swab per clean The swabs come dry, so you also need Eclipse or the non-flammable Aeroclipse. Each swab is single-use. On cameras with a moving sensor (IBIS), switch to cleaning mode or lock the sensor first. Technical details at a glance Type: sensor swabs for wet cleaning Type 4, width 33 mm Sensor format: Medium Format Contents: 12 swabs, individually sealed Single use, welded seams, channeled handle Scope of delivery 12 x Photographic Solutions Sensor Swab Ultra Type 4 (33 mm)