SmallRig Retro Cage for FUJIFILM X-T5 3870

Remote Controll MA-R2 like Fuji-RR-100 from JJC Shutter release with ergonomic housing & 90cm cable. This well made cable release allows e.g. the camera to be released without blurring when taking macro or portrait shots on a tripod. The shutter release supports single and continuous shooting as well as bulb shooting. The two-stage shutter release button has two pressure points. The camera focuses at the first pressure point and releases at the second. For continuous shooting or bulb exposures, the shutter release button can be locked with a lock slider. Continuous shooting: Set the camera to "Continuous shooting". Press the release button. Hold or lock the shutter button until you want to stop the series of images. Long time exposure: Set the camera exposure time to "bulb". Press the shutter button. Hold or lock the shutter button until you want to stop taking pictures. Technical Details: Cable length: approx. 90cm Dimensions: approx. 105x34x23 mm Weight: approx. 30g Compatible with:    • Fujifilm GFX 100 • Fujifilm GFX100S • Fujifilm GFX50S • Fujifilm GFX 50R • Fujifilm GFX100S II* • Fujifilm X-H1 • Fujifilm X-H2 • Fujifilm X-H2S • Fujifilm X-Pro2 • Fujifilm X-Pro3 • Fujifilm X-T5 • Fujifilm X-T4 • Fujifilm X-T3 • Fujifilm X-T2 • Fujifilm X-T1 • Fujifilm X-T50* • Fujifilm X-T30 • Fujifilm X-T20 • Fujifilm X-T10 • Fujifilm X-T200 • Fujifilm X-T100 • Fujifilm X-E3 • Fujifilm X-E2S • Fujifilm  X-E2 • Fujifilm X-E1 • Fujifilm X-A7 • Fujifilm X-A5 • Fujifilm X-A10 • Fujifilm X70 • Fujifilm X30 • Fujifilm X100F • Fujifilm X100T • Fujifilm X100VI •  Fujifilm XF10     * this connection cable is needed here to connect the 3.5 mm plug on the camera side Note: The cable has a 3-pin 2.5 mm jack plug on the camera side. It also works for cameras that are compatible with the Canon RS-60E3 remote shutter release.   Included in delivery: 1x Remote Shutter Release MA-R2 like Fuji RR-100 from JJC Note: Due to continuous efforts to improve the product and product features, both the pictures and specifications may vary slightly from the delivered product.

Patona Platinum Battery like Fuji NP-W235With the Fujifilm NP-W235 camera battery you get a powerful battery for your digital camera. These are high-quality products from the well-known camera battery manufacturer Patona. Technical data: voltage: 7.2V capacity: 2250mAh Cell type: Li-Ion Professional photographers also rely on the reliability of Patona batteries. Which provide more safety over a long service life and thermal protection. The thermal fuse protects both the camera battery itself and the camera from overheating during charging and during longer photo and video sessions. The well thought-out charging technology contributes to a long service life. Memory effect and unwanted deep discharge are a thing of the past with this camera battery. The Fujifilm NP-W235 can still be used even after prolonged storage. The comparatively high capacity of this small camera battery ensures long lasting photo and video fun. The battery is used in the following cameras: Fujifilm X-T4Fujifilm X-T5Fujifilm X-H2sFujifilm X-H2Fujifilm GFX50S IIFujifilm GFX100SDescription Original battery: Fujifilm NP-W235 Scope of delivery: 1x camera battery from Patona like Fujifilm NP-W235

Camera cable JJC Cable-R2  />The JJC Cable-R2 is specially designed for selected Fujifilm cameras. It is a cable that allows you to use our JJC S-series wired remotes, JM-II-series wireless remotes, ES-628-series wireless remotes and KiwifotosS UR-232-series wired remotes. The JJC Cable-R2 replaces the Fujifilm RR-100.  Various JJC products offer the advantage of being able to replace the camera output cable with a simple plug-in connection. For example, you can use a JJC output for Nikon and Canon EOS by simply purchasing a suitable cable for your camera. However, the cable is also suitable for many outlets from other manufacturers with a 2.5 mm jack socket. Technical data: Spiral cable 30cm Max. Length: 90cm Original connector Fujifilm RR-100 Scope of delivery: 1x JJC Camera cable Cable-R2 Compatible with the following cameras:   Fujifilm GFX 100, GFX 50S, GFX 50R, X-H1 and X-H2s, X-Pro2, X-Pro3, X-T4, X-T3, X-T2, X-T1, X-T30, X-T20, X-T10, X-T200, X-T100, X-E3, X-E2S, X-E2, X-E1, X-A7, X-A5, X-A10, X100F, X100T, X70, X30, XF10.

Timer Remote Controller TM-R2 like Fujifilm RR-100 from JJC The advantage of manual release is that you can no longer shake or accidentally move the image section. The cable release can also be used manually. The shutter release can be locked for manual long time exposure, the built-in stopwatch then counts down until the exposure is finished. Video recording can also be started and stopped. More features: The signal tones can be switched off, the display is illuminated and a key lock can be set Mirror lock up is not possible with this cable release Delayed triggering Long time exposures (the exposure time on the camera may have to be set to "BULB") Interval and continuous shooting Relevant notes: The camera focuses automatically before the shutter release if the release is programmed. The exposure time counts towards the interval. If you want an exposure time of 8 seconds, for example, the interval must be 10 seconds. So that the timer does not "hang around" in the air, there is this practical attachment: Timer Tripod Mounting RCH-TM Compatible with:    • Fujifilm GFX 100 • Fujifilm GFX100S • Fujifilm GFX50S • Fujifilm GFX 50R • Fujifilm GFX100S II* • Fujifilm X-H1 • Fujifilm X-H2 • Fujifilm X-H2S • Fujifilm X-Pro2 • Fujifilm X-Pro3 • Fujifilm X-T5 • Fujifilm X-T4 • Fujifilm X-T3 • Fujifilm X-T2 • Fujifilm X-T1 • Fujifilm X-T50* • Fujifilm X-T30 • Fujifilm X-T20 • Fujifilm X-T10 • Fujifilm X-T200 • Fujifilm X-T100 • Fujifilm X-E3 • Fujifilm X-E2S • Fujifilm  X-E2 • Fujifilm X-E1 • Fujifilm X-A7 • Fujifilm X-A5 • Fujifilm X-A10 • Fujifilm X70 • Fujifilm X30 • Fujifilm X100F • Fujifilm X100T • Fujifilm XF10 •       * this connection cable is needed here to connect the 3.5 mm plug on the camera side Technical details:    Delayed shutter release (Delay): 0s - 99h 59min 59s Long time exposure (Bulb): 0s to 99h 59min 59s* Interval: 1s - 99h 59min 59s Continuous shooting: 1-399 or infinite dimensions: 11 x 4,5 x 2,2cm weight: 72g Power supply: 2 micro cells (AAA) Cable length: approx. 90cm Operating temperature: -20 to +50°C   Scope of delivery: 1x Timer cable release 2x AAA batteries 1x manual in English and German

You know it: You have to take a lot of photos (e.g. products) in the studio and the battery is always empty. This can sometimes be tedious. Here you have the right solution, the so-called DC coupler, which looks like an original battery, but has no inner life.With it you can power your camera via a separate power supply and can shoot as long as you want. The NP-W235 is used in the following cameras: Fujifilm XT-4 and GFX 100S. Technical data: Input: 100-240V, 50-60HzOutput: 8V - 3ADiameter socket AC adapter: 0.55mmDiameter socket dummy battery: 0.55mmCable length AC adapter: ca 1.5mCable length dummy cable: ca. 0.9mLength power cable (CH plug, Euro 8 plug): ca 1.3m Note: The battery door must be closed on some cameras for the camera to work, please check your user manual. Scope of delivery: 1 x power supply1 x power cord1 x DC coupler Fuji CP-W235

Dual LCD USB Charger Fuji NP-W235 Fujifilm X-T4 by Patona With the PATONA Dual LCD USB Charger for Fuji NP-W235, two batteries can be charged quickly, simultaneously and independently of each other. It does not matter whether the two batteries have the same capacity. The integrated, microcontroller controlled charging technology automatically detects the required voltage of the inserted battery and prevents overcharging or overheating.Important information such as the state of charge, use of the car adapter and the charging method is shown on the LCD display. Suitable batteries can be found here. Technical data:   Input: Micro USB 5V / 2.1A (max.) / Type-USB-C 5V / 2.1A (max.)output: 8,4V700mA x1 , 500mA x2   Suitable for the following camera types:   FujifilmXT4, X-T4   Suitable for the following battery models:   Fuji NP-W235 Scope of delivery: 1x Dual LCD USB Charger Fuji NP-W235 Fujifilm X-T4 XT4 from Patona

Fujifilm Battery NP-W235 The capacity of the new NP-W235 battery is 1.5 times greater than that of its predecessor (NP-W126S). It can take 500 photos on a single charge, and up to 600 photos in economy mode. If the optional battery handle is fitted with two additional batteries, the camera has enough power for around 1,450 photos, and even up to 1,700 photos in economy mode. When the battery power runs out, the camera automatically switches to the next battery without turning off or interrupting the current recording (e.g. video or continuous shooting). When using the optional battery grip VG-XT4 with two additional batteries, even up to 1,700 photos can be taken. Scope of delivery:1 x Fujifilm NP-W235 battery