SmallRig Swivel and Tilt Adjustable Monitor Mount with ARRI-Style Mount 2903

SmallRig Cage for Sony Alpha 7 IV Alpha 7S III Alpha 1 SmallRig Full Cage for Sony Alpha 7 IV/Alpha 7S III/Alpha 1 3667 is designed to provide accessory mounts and protect the camera. Two locking side plates and a 1/4"-20 screw on the bottom keep the camera locked in place and prevent flexing. Built-in protective spacers all around prevent the camera from being scratched. The cage allows access to the interfaces, dials, buttons and battery compartment covers. A spindle wrench is located on the battery compartment that conforms to the camera's curve, leaving room for a pinky finger to grip comfortably. 1/4"-20 threaded holes, ARRI 3/8"-16 mounting holes and cooling shoes support the 2165 top grip, 2093 side grip, 2903 monitor mount, microphones, LED lights, monitors, etc. Arca quick release plate on the bottom is compatible with DJI RS 2/RSC 2 and DJI RS 2/RSC 2 stabilizer quick release plate (pad) for stabilizer shooting. The optional HDMI Cable Clamp 3000 works with the Alpha 7 IV/Alpha 7S III to protect interfaces and ensure stable signal transmission while filming. Holes on the sides and bottom of the cage allow accessories such as the PAC2456 hand strap and PSC2428 shoulder strap to be attached. In addition, the cage has a built-in magnetic key that facilitates disassembly and assembly. Notice: The HDMI cable clamp 3000 is not compatible with Alpha 1.To use the side lock, please remove the split ring on the left side of the camera first. Advantages at a glance: One-piece full cage protects the cameraThe spindle key on the battery compartment adjusts to the camera curve and improves grip.Multiple mounting points: 1/4"-20 threaded holes, ARRI 3/8"-16 mounting holes, flash shoes and NATO rails for handles, microphones, LED lights, monitors, etc.Two-point locking: Fixes the camera via 1/4"-20 screw on the bottom and the shoulder strap hole on the left side (with 2 sliders, suitable for different models).Arca quick release plate on the bottom for fast switching between tripod, stabilizer (DJI RS 2/RSC 2) and handheld shooting. For technicians: Product dimensions: 146 x 107.6 x 64.5 mmNet weight: 190g±5gMaterial: aluminum alloy, stainless steel, silicone Suitable for the following cameras: Sony Alpha 7 IV Sony Alpha 7S III Sony Alpha 1 Sony Alpha 7R IV Sony Alpha 7R V Scope of delivery: 1 x cage2 x lockable side plate  

SmallRig Cage for Canon EOS R50: The perfect addition for you The Canon EOS R50 is undoubtedly an impressive camera that appeals to both photographers and videographers. With its compact size and impressive features, it has captured our hearts. But how can you fully exploit the potential of this great camera? That's where the SmallRig camera macäfig comes in. What is a camerakäfig? Before we dive into the details of the SmallRig Camera Accäfig, it's important to understand what a camera accäfig is in the first place. A camera fig is an accessory designed to enhance the functionality of the camera while increasing safety and stability. Made of aluminum alloy or other sturdy materials, it surrounds your camera to protect it from shocks and drops. What makes the SmallRig camera accüfig so special? The SmallRig camera akäfig was designed specifically for the Canon EOS R50 and offers a custom fit that perfectly encloses your camera. Here are some reasons why this käfig is so special: Robust construction The SmallRig camera acäfig is made of high quality aluminum alloy that protects your camera from damage. Whether you're shooting in nature or out on the town, this käfig will stand up to the rigors. Additional attachment points With additional threaded holes and mounting points, the Käfig offers many ways to attach accessories such as microphones, monitors and lighting. This opens up completely new creative possibilities. Improved handling The Käfig is equipped with ergonomic handles that give you better control üglichen over your camera. This is especially important when you are working in difficult shooting situations. Improved versatility Another great advantage of the SmallRig camera rigäfig is its versatility. Here are some ways it can boost your creativity: Better stabilization Stability is very important when filming. The Käfig offers additional attachment points for tripods or gimbals to minimize camera shake. Protection for your equipment Your Canon EOS R50 is an investment, and the case protects it from the rigors of filming and shooting in a variety of environments. Advanced connection options The Käfig allows easy access to all ports and controls of your camera without having to remove it. This saves time and ensures a smooth workflow. The lower Arca Swiss quick-release plate accepts Arca Swiss tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals and allows you to quickly switch between gimbal, handheld and tripod modes. A double-sided screw key is included to facilitate disassembly and assembly. The advantages at a glance: Specially designed for the Canon EOS R50 compatible with the Arca-Swiss clamping system Can be used directly on gimbals from DJI   For the technicians: Product dimensions: 133.5 x 59.2 x 101.5 mm Product weight: 129.0 ± 5.0g Material(s): aluminum alloy   Suitable for the following camera:   Canon EOS R50   Scope of delivery:   1 x Camera accäfig suitable for Canon EOS R50   Typical questions related to this product: Is the SmallRig camera accäfig 4214 compatible with other camera models? The SmallRig camera acäfig is designed specifically for the Canon EOS R50 and offers a custom fit. It is not compatible with other camera models. Can I just attach the käfig to my Canon EOS R50? Yes, the SmallRig camera acäfig is easy to mount and offers a user-friendly installation. Does the Käfig provide additional stability during video recording? Yes, the Käfig offers additional mounting points for tripods and gimbals to improve stability during video recording. Does the cage change the design of my camera? The Käfig is designed to complement the design of the Canon EOS R50 without drastically changing its appearance.

SmallRig Cage Set for Sony Alpha 7 IV Alpha 7S III Alpha 7R V   SmallRig Full Cage Set for Sony Alpha 7 IV/Alpha 7S III/Alpha 1 3667 is designed to provide accessory mounts and protect the camera. Two locking side plates and a 1/4"-20 screw on the bottom keep the camera locked in place and prevent flexing. Built-in protective spacers all around prevent the camera from being scratched. The cage allows access to the interfaces, dials, buttons and battery compartment covers. A spindle wrench is located on the battery compartment that conforms to the camera's curve, leaving room for a pinky finger to grip comfortably. 1/4"-20 threaded holes, ARRI 3/8"-16 mounting holes and cooling shoes support the 2165 top grip, 2093 side grip, 2903 monitor mount, microphones, LED lights, monitors, etc. Arca quick release plate on the bottom is compatible with DJI RS 2/RSC 2 and DJI RS 2/RSC 2 stabilizer quick release plate (pad) for stabilizer shooting. The optional HDMI Cable Clamp 3000 works with the Alpha 7 IV/Alpha 7S III to protect interfaces and ensure stable signal transmission while filming. Holes on the sides and bottom of the cage allow accessories such as the PAC2456 hand strap and PSC2428 shoulder strap to be attached. In addition, the cage has a built-in magnetic key that facilitates disassembly and assembly. Notice:The HDMI cable clamp 3000 is not compatible with Alpha 1.To use the side lock, please remove the split ring on the left side of the camera first. Advantages at a glance: One-piece full cage protects the cameraThe spindle key on the battery compartment adjusts to the camera curve and improves grip.Multiple mounting points: 1/4"-20 threaded holes, ARRI 3/8"-16 mounting holes, flash shoes and NATO rails for handles, microphones, LED lights, monitors, etc.Two-point locking: Fixes the camera via 1/4"-20 screw on the bottom and the shoulder strap hole on the left side (with 2 sliders, suitable for different models).Arca quick release plate on the bottom for fast switching between tripod, stabilizer (DJI RS 2/RSC 2) and handheld shooting. For technicians: Product dimensions: 146 x 107.6 x 64.5 mmNet weight: 190g±5gMaterial: aluminum alloy, stainless steel, silicone Suitable for the following cameras: Sony Alpha7 IVSony Alpha7S IIISony Alpha 7R V Scope of delivery: 1 x cage2 x lockable side plate1 x HDMI cable clamp 30001 x ARRI recording handle 2165  

SmallRig Camera Cage for the Canon EOS R6 Mark II The SmallRig Camera Cage or Camera Cage 4159 is an aluminium accessory designed for the Canon EOS R6 Mark II camera.It consists of a form-fitting cage that allows unobstructed access to the camera's features, ports, battery and SD card slot.The camera cage has 1/4"-20 and 3/8"-16 accessory mounting points that allow available accessories to be attached without putting strain on the camera body. Technical specifications Dimensions: 145 x 58.7 x 105.6 mmNet weight: 158 gMaterial: Aluminium alloy Compatibility Canon EOS R6 Mark II Scope of delivery 1 x SmallRig camera cage 4159

SmallRig camera cage compatible with Fujifilm GFX100 II   The SmallRig Camera Cage for the Fujifilm GFX100 II is a groundbreaking addition for photographers looking for more stability, flexibility, and protection for their Fujifilm GFX100 II camera. The SmallRig Camera Cage: An Overview The SmallRig Camera Cage is a high-quality accessory designed specifically for the Fujifilm GFX100 II 4201. It is designed to protect the camera while increasing flexibility when shooting. The cage is made of sturdy aluminum and offers numerous mounting options for accessories such as microphones, monitors, and flash units. Let's take a closer look at its outstanding features. Robust construction The SmallRig camera cage is extremely stable and durable. It protects the camera from bumps and drops and helps prevent damage during use. This is especially important when working in demanding environments or in situations where your camera is subject to heavy use. Advanced mounting optionsWith a variety of 1/4“ and 3/8” threads, this cage offers a wide range of mounting options for accessories. You can easily attach microphones, monitors, external lighting, and much more to improve your recording quality. This allows you to give free rein to your creativity and adapt your equipment to your needs. Ergonomic designThe camera cage was designed with ease of use in mind. It gives you convenient access to all camera controls, including the battery compartment, without having to remove the cage. This allows for smooth operation without wasting valuable time. How the SmallRig Camera Cage improves your photography StabilityA major advantage of the SmallRig Camera Cage is the extra stability it gives your camera. This means less camera shake and a more stable shot overall. This is especially important when shooting in motion or in low light conditions. More creativityThe cage opens up new creative possibilities by allowing you to attach accessories such as monitors and microphones. You can customize your camera to suit your needs and take better shots. Protection for your investmentYour Fujifilm GFX100 II 4201 is a valuable investment. The SmallRig camera cage protects it from damage that can occur during use. This gives you the assurance that your camera is always protected. Which camera is this camera cage compatible with: Fujifilm GFX100 II The features of this camera cage: Dimensions: 188.5 × 64.1 × 130.5 mmProduct weight: 210.0 ±5 gMaterial: aluminum alloy Included in delivery: 1 x Camera Cage1 x HDMI & USB-C Cable Clamp2 x M4 Screws2 x Side Lock Adapters1 x User Manual   Conclusion The SmallRig Camera Cage for the Fujifilm GFX100 II 4201 is an indispensable accessory for photographers who want to protect their camera optimally while expanding their creative possibilities. With its robust construction, numerous mounting options, and ergonomic design, this cage is an investment that will pay off in the long term.    

SmallRig sling Handgript for DJI RS 2 and RSC 2 The SmallRig Sling Handle for DJI RS 2 and RSC 2 Gimbal 3161 is specifically designed to reduce arm fatigue when shooting with the gimbal at low angles and provide attachment points for accessories. The handle attaches to the DJI R case handle with a 1/4"-20 screw and has a raised edge to prevent twisting. On the top of the handle are two 1/4"-20 threaded holes, an ARRI 3/8"-16 mounting hole, and a cold shoe port for mounting the 2903 or 2905 monitor mount. On the side are 1/4 mounting holes for mounting the DJI R smartphone clamp or 2070 Magic Arm. The handle has a built-in Allen wrench for easy removal and reinforcement. Also, there is an additional locking knob that allows you to replace the DJI R case handle's slotted screw and then adjust the angle without tools. The optional KPAC2466 gimbal shoulder strap is available separately to further reduce arm fatigue. Advantages at a glance: Specifically designed for DJI RS 2 and RSC 2 gimbals.Reduces arm fatigue when shooting at low angles.Secures to DJI R briefcase handle with 1/4"-20 screw and adopts a raised edge to prevent twisting.Built-in wrench for easy disassembly.Features 1/4"-20 thread, ARRI 3/8"-16 and cold shoe accessory mounts.Provides an additional locking knob to replace the DJI R briefcase handle slotted screw to adjust the angle without tools. Notice:Maximum payload: 6kgFor DJI RSC 2, the DJI R Briefcase Handle is additionally required. For the technicians: Product Dimensions:154.5 x 46 x 28mmNet weight:208g Suitable for the following products: DJI RS 2DJI RSC 2 Scope of delivery: 1 x Sling Handle1 x button   Note: Due to continuous efforts to improve the product and product features, both the pictures and specifications may vary slightly from the delivered product.  

SmallRig Cage for Sony FX30 or FX3   The SmallRig Camera Cage 4183 is a form-fitting cage suitable for Sony FX30 or Sony FX3, with this cage you protect your camera on one side and have the possibility to attach accessories via various mounting points. On the top side is a so-called NATO rail mounted, which allows you to easily clamp accessories. A special HDMI cable clamp protects the interfaces and ensures stable signal transmission. For attaching the accessories, the camera cage has various 1/4"-20 threaded holes. A magnetic key is also included for easy camera installation and removal. Notice: 1. before mounting the original XLR grip, you must disassemble the upper NATO rail. 2. since the upper 1/4"-20 holes have a hole center distance of 27mm, they are not compatible with accessories with a hole center distance of 18mm. Technical features: Product dimensions: 159 x 101.2 x 66.2mm Product weight: 195±5g Material(s): Aluminum alloy, stainless steel Suitable for the following cameras: Sony FX30 Sony FX3 Scope of delivery: 1 x Cage1 x NATO rail1 x HDMI cable clamp2 x 1/4"-20 screw

SmallRig Camera Cage for FUJIFILM X-H2S and X-H2 The SmallRig Camera Cage is the perfect solution for professional videographers and ambitious filmmakers working with the FUJIFILM X-H2S or X-H2. The robust cage system offers comprehensive protection, numerous mounting options, and maximum flexibility when rigging your camera. This precision-fit aluminum cage from SmallRig was developed specifically for the FUJIFILM X-H2S and X-H2. Thanks to its precise shape, the cage securely encloses the camera without blocking any controls or the display. Multiple 1/4“-20 and 3/8”-16 threads with ARRI location holes allow you to attach additional accessories such as monitors, microphones, or handles. The integrated NATO rail and cold shoe mount greatly expand your creative possibilities. An integrated wrench on the underside and an Arca-Swiss-compatible base plate round off the well thought-out design. Special features and advantages Robust design: Made from lightweight, CNC-machined aluminum for maximum protection and minimum weight. Accessory-friendly: Compatible with many SmallRig components such as top handles, magic arms, or monitor mounts. Quick conversion: Thanks to the Arca-Swiss-compatible base, you can use the cage directly on compatible tripods and gimbals. Ergonomic & accessible: All controls remain accessible for efficient working even in hectic situations. Compared to generic universal cages, this model impresses with its perfect fit and optimal functionality specifically for FUJIFILM cameras. Compatibility FUJIFILM X-H2 FUJIFILM X-H2S Technical Material: Aluminum alloy Weight: approx. 230 g Connections: 1x cold shoe, multiple 1/4“-20 & 3/8”-16 ARRI threads, NATO rail Mounting: Arca-Swiss compatible quick-release plate Dimensions: approx. 150 × 107 × 68 mm Version: 3934B Scope 1x SmallRig Camera Cage for FUJIFILM X-H2S/X-H2 IMPORTANT: Please note that the connection for the remote trigger is no longer accessible after the cage has been mounted. This is due to the design of the cage.

SmallRig Cage for Fuji GFX100S and GFX50S II The camera cage number 3715 from SmallRig is made specifically for the Fujifilm GFX100S and GFX50S II mirrorless medium format camera. It features Arca-type dovetails on both axes to mount the bracket vertically or horizontally at a compatible angle. The aluminum angle side plate is machined to access the camera's ports, and it can slide forward to allow access to the battery compartment. In addition, the camera cage has several 1/4"-20 and 3/8"-16 sockets, as well as several ARRI threaded holes for mounting various accessories. Center markings are located in the middle of each axis of the camera cage to center the camera on a mounted head, and the included hex wrench is located in the base plate when not in use. Product dimensions: 184x115x71 mmNet weight: 213 gMaterial(s): Aluminum alloy Fits the following cameras: Fujifilm GFX100S and GFX50S II Scope of delivery 1 x Camera cage 3715

SmallRig Cage Kit for Canon EOS C70 The SmallRig Camera Cage with Handle for Canon EOS C70 is designed to protect the camera and provide attachment points for accessories for a comfortable shooting experience. It includes: a top plate, a side plate, a base plate, a detachable extended base plate, a top NATO grip, a cable clamp, etc., and the convenient top NATO grip facilitates camera movement and stabilizes shooting; the top plate, base plate and side plate can be assembled into a half cage that supports the original grip unit and microphone holder unit. The base of the half cage consists of a base plate and a removable extended base plate. It can be mounted directly on DJI RS 2 / RSC 2 stabilizers and Acra-Swiss tripod by simply removing the extended base plate. The kit also comes with an HDMI cable clamp that prevents accidental signal interruption and ensures stable data transmission. The 1/4"-20 threaded holes, 3/8"-16 threaded holes, cold light mounts, ARRI 3/8"-16 mounting holes, NATO rails.Matching products:side handle 3260/2093/2427upper handle 2165/1638Magic Arm 2115/2071Monitorhalterung 3601/2903/2905Base plate with 15 mm double rod clamp 1674Single rod clamp 3276 In addition, an Allen wrench is included for easy disassembly and assembly.  Note:Installation order: base plate, side plate, camera, top plate.Please remove the removable extended base plate before attaching the DJI RS 2/RSC 2. Advantages at a glance: Special handheld kit for Canon EOS C70 for stable and comfortable shooting.1/4"-20 threaded holes, 3/8"-16 threaded holes, cold light mounts, ARRI 3/8"-16 mounting holes, NATO rails, etc. for multi-scene shooting.The top plate is compatible with the original handle and microphone mount.Supports DJI RS 2 / RSC 2 stabilizers after removing the removable extended base plate.HDMI cable clamp provides stable data transmission.Retains full access to original camera grip and buttons.Fits Canon EOS C70 perfectly by extracting its elements. For technicians: Product dimensions: 90.5 x 123 x 12.7mm.Net weight: 350g±5gMaterial: aluminum alloy, stainless steel Suitable for: Canon EOS C70 Scope of delivery: 1 x top plate1 x side plate1 x base plate1 x Removable extended base plate6 x 1/4''-20 screw1 x Handle 24391 x Cable clamp 16391 x User manual