Godox XPro II TTL Wireless Flash Trigger for Olypmus Cameras

Innovative design: The Godox V1Pro Olympus clip-on flash The best clip-on flash for Olympus, now even better! The Godox V1Pro clip-on flash for Olympus is characterized by a round flash head and a detachable additional flash. This is there to perfect the lighting of your scenes. The Pro version of the clip-on flash not only impresses with its compact design, similar to the original V1 clip-on flash, but is also equipped with additional functions. Simply attach the included SU100 accessory flash to the front of the Godox V1Pro to Olympus to optimize your portrait shots in manual or TTL mode. The powerful 76-watt clip-on flash is compatible with many Olympus cameras and supports E-TTL / E-TTL II automatic mode. The Godox V1Pro for Olympus offers a zoom range of 28 to 105 mm as well as a 330° rotation of the head and a tilt range of -7 to 120°. The round flash head ensures a uniform quality of light for creative effects and a distinctive look. The detachable additional flash for the small additional light The SU-1 auxiliary flash included in the scope of delivery can be easily attached to or removed from the front of your V1Pro to Olympus. When switched on, the auxiliary flash acts as an additional fill light, which is extremely useful for your portrait shots. You can set the power of the subflash from 1/128 to 1/1 and -3 to +3 EV in 1/3 increments. Your powerful, versatile on-camera light source The Godox V1Pro clip-on flash for Olympus supports high-speed synchronization up to 1/8000 s, ideal for bright backgrounds and shots with large apertures. It also enables synchronization to the first and second shutter curtain as well as flash exposure compensation. In addition to these functions, a 2W LED modeling light has been added, which can be used for careful composition. The rechargeable battery ensures longevity The V1Pro clip-on flash is powered by an included rechargeable battery with a charging time of 1.5 sec - fast enough to keep up with the action. The flash output can be set from 1/1 to 1/256, allowing you to take 500 full power flashes on one battery charge. For continuous shooting, your V1Pro Olympus can flash 100 times at full power before the overheat protection level is reached. The supplied battery has an integrated USB-C port, which allows it to be charged directly on any USB-C compatible device. If the capacity of this battery is not sufficient, the Godox V1Pro clip-on flash for Olympus can be supplied with power using the separately available PB960 battery pack. The 2.4 GHz X wireless radio system from Godox for your flexibility The Godox 2.4 GHz X wireless radio system has a range of up to 100 meters. This makes your Godox V1Pro clip-on flash for Olympus, where you can choose between 32 channels and different groups, a very flexible clip-on flash. This allows you to avoid interference with other photographers or, in the case of complex setups, to trigger each flash individually according to your needs.   Further advantages and features of the Godox V1Pro clip-on flash In addition to the hot shoe, the Godox V1Pro clip-on flash for Olympus has a 2.5 mm sync connector for a wired connection. The flash head is equipped with a magnetic surface to attach optionally available Godox light modifiers at lightning speed. With the clear LCD display, you are always up to date with your settings. The modeling light with a colour temperature of 3,300 K and an output of 2 W allows you to create a precise composition. Firmware updates can be conveniently installed via the USB-C port. The compact dimensions of 15.6 x 12.4 x 7.59 cm and a low weight of just 580 grams make the V1Pro the ideal companion for your photography. The Godox V1Pro clip-on flash for Olympus is compatible with the optional AK-R1 set, which can be attached magnetically. Specific information on the Godox V1Pro clip-on flash for Olympus: Please note that the flash head of the Godox V1Pro clip-on flash for Olympus must be raised in order to use the SU-1 add-on flash supplied. Also note that this auxiliary flash does not work with wireless transmission or high-speed synchronization. Scope of delivery: 1 x Godox V1Pro Olympus clip-on flash 1 x carrying bag 1 x additional flash SU-1 1 x Godox VB30 battery 1 x USB-C cable 1 x power adapter with USB-A connection 1 x Stand for clip-on flash 1 x instruction manual in English and Chinese   You can find all the technical details in the Godox V1Pro to Olympus instruction manual in English

Simple studio flash with 300 watt seconds from Godox   Godox is proud to present the new SK300II-V, an evolution of the SK series.  True to the principle of providing photographers with versatile and technologically advanced photographic equipment. This allows you, as a creative photographer, to fully realize your creative potential and work efficiently.   With the SK300II-V studio flash from Godox you get a studio flash which is equipped with the latest technology. The studio flash offers a fast charging time to flash readiness. The 10W LED modeling light is flexibly adjustable and gives you a good feeling before photography.   Settings are made via push buttons on the back of the unit and displayed on the easy-to-read LCD. The SK300II-V has built-in 2.4 GHz wireless X technology with 32 channels. With an optional X1, X2 or XPro transmitter, you can conveniently control the flash output and modeling light remotely. The flash head also features S1/S2 slave triggering, which facilitates the use of cameras with pre-flash. In addition, the SK300II-V has a Bowens accessory port on the front that allows the use of Godox modifiers as well as accessories from many other manufacturers that use this system.   Advantages at a glance:   Built-in receiver for Godox's 2.4 GHz X systemBowens light formaer connection for a wide selectionOptical receiver for triggering by another flash already built inSimple operationEasy-to-read LCD display shows settings and functions   For technicians:   Guide number of 58(300Ws)Flash charging time: 0,1-0,9sControl range: 1/1 to 1/16Modeling light: 10W LED / 5700K +/- 200 Kelvinmodeling light control range: 5% - 100%Bowens S-type bayonet adapterDimensions: 350x206x137mmWeight: 2 kg   Scope of delivery:   1x Godox SK300II-V1x flash tube1x protection cap1x cold current cable       You can find all the technical details in the Godox SK300II instruction manual in English

Simple studio flash with 400 watt seconds from Godox   Godox is proud to present the new SK400II-V, an evolution of the SK series.  True to the principle of providing photographers with versatile and technologically advanced photographic equipment. This allows you, as a creative photographer, to fully realize your creative potential and work efficiently.   With the SK300II-V studio flash from Godox you get a studio flash which is equipped with the latest technology. The studio flash offers a fast charging time to flash readiness. The 10W LED modeling light is flexibly adjustable and gives you a good feeling before photography.   Settings are made via push buttons on the back of the unit and displayed on the easy-to-read LCD. The SK300II-V has built-in 2.4 GHz wireless X technology with 32 channels. With an optional X1, X2 or XPro transmitter, you can conveniently control the flash output and modeling light remotely. The flash head also features S1/S2 slave triggering, which facilitates the use of cameras with pre-flash. In addition, the SK300II-V has a Bowens accessory port on the front that allows the use of Godox modifiers as well as accessories from many other manufacturers that use this system.   Advantages at a glance:   Built-in receiver for Godox's 2.4 GHz X systemBowens light formaer connection for a wide selectionOptical receiver for triggering by another flash already built inSimple operationEasy-to-read LCD display shows settings and functions   For technicians:   Guide number of 65 (400Ws)Flash charging time: 0,1-0,9sControl range: 1/1 to 1/16Modeling light: 10W LED / 5700K +/- 200 Kelvinmodeling light control range: 5% - 100%Bowens S-type bayonet adapterDimensions: 390x232x137mmWeight: 2.1 kg   Scope of delivery:   1x Godox SK400II-V1x flash tube1x protection cap1x cold current cable     You can find all the technical details in the Godox SK400II instruction manual in English

Godox has fundamentally rethought lighting for macro photography with the MF12 Macro Flash.With this flash head, it is easy to take beautiful and sharp photos of small subjects such as plants, animals and insects from a very short distance. The MF12 can be used in a variety of ways. With the included flash stand, it can be used in very tight spaces. However, the highlight of this flash set is that it can be mounted directly to a lens with a special adapter, and this adapter allows up to six MF12 flash heads to be mounted and positioned individually. As a camera-independent TTL flash, the MF12 can be used with the Godox XPro and Godox X2T. These triggers are compatible with major brand cameras including Nikon, Sony, Canon, FUJIFILM, Olympus and Panasonic.2.4 GHz wireless controlWireless control allows transmission over long distances for more flexibility in your shooting. In addition, 5 groups of 32 channels each help avoid interference and noise when multiple wireless systems operate close to each other.Compact designThe MF12 macro flash is ideal for close-up shooting thanks to its compact design and unique ability to attach directly to the lens via an optional adapter or place around the subject with the included flash stand. Rechargeable batteryThe powerful built-in lithium battery supports approximately 500 full-power flashes with a flash recycle time of 0.01 to 1.7 seconds. This battery can also be easily recharged via an included USB Type-C cable.Color effects and color temperature adjustment kitIncluded with the MF12 macro flash are the MF-11C color effect and MF-11T color temperature adjustment sets. The color effect set includes a selection of colored gel filters to expand your creative options. The Color Temperature Adjustment Set contains a range of gel filters to adjust the color temperature of the flash head. This allows you to match the color temperature of the ambient light no matter where you are shooting.Mounting RingsIncluded in this 2-piece kit are 8 different mounting rings: 49mm, 52mm, 55mm, 58mm, 62mm, 67mm, 72mm, and 77mm.Scope of delivery:2 x MF12 Macro Flash1 x MF-AR mounting ring2 x MF-11C color effect set2 x MF-11T set / color temperature 2 x Extreme close-up positioning adapter 2 x MF12 adapter for cold hot shoe2 x color filter holder2 x Flash stand2 x USB Type-C cable2 x Soft Case for color filter set1 x carrying bagNote: order the matching double loader at the same time