Haida Grey Leather Filter Case 100x100mm

ND filter plug-in filter ND 1.2 100 mm Haida   The Haida rectangular ND1.2 gray filter provides shutter speed extension during exposure in a shot by reducing the amount of incoming light on the sensor. The Neutral Density 1.2 filter is rather weak and is particularly suitable for low-light shooting or videographers. A margin of 4 stops allows photographers and filmmakers to work with a more open aperture in the midday sun. The ND1.2 gray filter is especially suitable for:Perfect for long exposures on sunrises and sunsets or cloudy skies. Videographers are just as enthusiastic as photographers about the ND1.2 and use it for lower apertures in sunlight.  With an ND1.2 you can achieve the following shutter speeds: At 1/2000sec, the shutter speed increases to 1/125sec.At 1/500sec the shutter speed increases to 1/30secAt 1/125sec the shutter speed increases to 1/8sec Multi-coated optical glass reduces reflectionsThe Haida gray filter is made of glass that is ground and polished on both sides for durability and the highest optical quality. The two-millimeter-thin glass filter is free of color casts and offers high resolution. Its special multi-coating reduces the occurrence of reflections and makes the filter insensitive to scratches. Easy to mount with separately available adapter rings and filter holder.For mounting, screw the matching adapter ring from the Haida M10 filter system onto the lens and attach the filter holder to it. In this way, the graduated filter can be easily used with lenses from a focal length of approximately 16 millimeters on a full-frame camera (APS-C from approximately 11 millimeters).Up to three slots in the holder accommodate the desired creative filters. When inserting the ND filter, please make sure that the gray filter covers the lens properly so that no light enters sideways.   Metal box for safe storage and transportationThe filter comes with a metal box. This is perfect for transporting or storing the filter well protected. All advantages at a glance: Ideal for landscape photographyHigh-quality optical glass with nano coatingFor more open apertures in daylightAbsolute color neutralityEasy insertion instead of screwing (adjust image detail and insert filter directly)Scratch-resistant multi-coating suppresses reflectionsRed Diamond version, significantly increased break resistanceRounded R5 edges for easier mountingPart of a complete filter system with optionally available adapter rings and filter holder Technical details: Material: glass, multi-coated, scratch resistant, splash water protectedCoating: Nano Pro coatedStrength: ND1.2 (4 stops)Dimensions (W x L x H): 100 x 100 x 2 mmWeight: 65 g Scope of delivery: 1 x Haida Gray Filter ND1.2 100 x 100 mm1 x transport box Gray filter calculationThe aperture reduction of ND filters is calculated as follows:The density of ND filters is usually given in steps of 0.3.To obtain the aperture reduction, first multiply the value by 10 and then divide by 3. 0.3 x 10 = 3 | 3 = 1 f-stop0.9 x 10 = 9 | 3 = 3 f-stops0.6 x 10 = 6 | 3 = 2 f-stops1.2 x 10 = 12 | 3 = 4 f-stops1.8 x 10 = 18 | 3 = 6 f-stops3.0 x 10 = 30 | 3 = 10 f-stops3.6 x 10 = 36 | 3 = 12 f-stops4.5 x 10 = 45 | 3 = 15 f-stops

ND filter plug-in filter ND 4.5 100 mm Haida   Super Stopper Gray Filters ND4.5 are perfect for long exposures for architectural photography. The Haida rectangular ND4.5 gray filter provides shutter speed extension during exposure in a shot by reducing the amount of incoming light on the sensor. The Neutral Density Filter 4.5 filter is a strong gray filter - which is also called Super Stopper - and is especially suitable for long exposures in architectural photography in bright sunlight.A margin of 15 stops makes the surface look very smooth and surreal in long exposures of water. Architectural photographers use the ND filter for extended long exposures that make moving people, animals or cars in front of buildings, landmarks or in busy squares disappear from the picture. Further, architectural photographers use it to blur clouds above architectures for a particularly beautiful effect. The ND4.5 gray filter is particularly suitable for:Perfect for long exposures of water for creative work. For example, at sunrise, the seawater flowing away looks surreal. Architectural photographers often use long exposure to blur the clouds over the architecture to enhance the photo, as this effect adds artistic value to the image. With an ND4.5, you can achieve the following shutter speeds: At 1/2000sec, the shutter speed increases to 15sec.At 1/500sec the shutter speed increases to 1min4secAt 1/125sec, the shutter speed increases to 4min16sec. Multi-coated optical glass reduces reflectionsThe Haida gray filter is made of glass that is ground and polished on both sides for durability and the highest optical quality. The two-millimeter-thin glass filter is free of color casts and offers high resolution. Its special multi-coating reduces the occurrence of reflections and makes the filter insensitive to scratches. Easy to mount with separately available adapter rings and filter holder.For mounting, screw the matching adapter ring from the Haida M10 filter system onto the lens and attach the filter holder to it. In this way, the graduated filter can be easily used with lenses from a focal length of approximately 16 millimeters on a full-frame camera (APS-C from approximately 11 millimeters).Up to three slots in the holder accommodate the desired creative filters. When inserting the ND filter, please make sure that the gray filter covers the lens properly so that no light enters sideways.   Metal box for safe storage and transportationThe filter comes with a metal box. This is perfect for transporting or storing the filter well protected. All advantages at a glance: Ideal for landscape photographyHigh-quality optical glass with nano coatingAbsolute color neutralityEasy insertion instead of screws (adjust the image section and insert the filter directly)Scratch-resistant multi-coating suppresses reflectionsRed-Diamond version, break resistance significantly increasedRounded R5 edges for easier mountingPart of a complete filter system with optionally available adapter rings and filter holder Technical details: Material: glass, multi-coated, scratch resistant, splash water protectedCoating: Nano Pro coatedStrength: ND4.5 (15 stops)Dimensions (W x L x H): 100 x 100 x 2 mmWeight: 65 g Scope of delivery: 1 x Haida Gray Filter ND4.5 100 x 100 mm1 x transport box Gray filter calculation The aperture reduction of ND filters is calculated as follows:The density of ND filters is usually given in steps of 0.3.To obtain the aperture reduction, first multiply the value by 10 and then divide by 3. 0.3 x 10 = 3 | 3 = 1 f-stop0.9 x 10 = 9 | 3 = 3 f-stops0.6 x 10 = 6 | 3 = 2 f-stops1.2 x 10 = 12 | 3 = 4 f-stops1.8 x 10 = 18 | 3 = 6 f-stops3.0 x 10 = 30 | 3 = 10 f-stops3.6 x 10 = 36 | 3 = 12 f-stops4.5 x 10 = 45 | 3 = 15 f-stops  

ND filter plug-in filter ND 0.9 100 mm from Haida   The rectangular Haida Gray Filter ND0.9 provides shutter speed extension during exposure in a shot by reducing the amount of incoming light on the sensor. The Neutral Density 0.9 filter is rather weak and is particularly suitable for low-light shooting or videographers. A three-stop latitude allows photographers and videographers to work with a more open aperture in the midday sun. The ND 0.9 gray filter is particularly suitable for:Long exposures in low light when you don't want to extend the shutter speed too long. For example, for sunrises and sunsets or cloudy skies. Videographers are just as enthusiastic as photographers about the ND0.9 and use it for lower apertures in sunlight.  With an ND0.9 you can achieve the following shutter speeds: At 1/2000sec, the shutter speed increases to 1/250sec.At 1/500sec the shutter speed increases to 1/60secAt 1/125sec, the shutter speed increases to 1/15sec. Multi-coated optical glass reduces reflectionsThe Haida gray filter is made of glass that is ground and polished on both sides for durability and the highest optical quality. The two-millimeter-thin glass filter is free of color casts and offers high resolution. Its special multi-coating reduces the occurrence of reflections and makes the filter insensitive to scratches. Easy to mount with separately available adapter rings and filter holder.For mounting, screw the matching adapter ring from the Haida M10 filter system onto the lens and attach the filter holder to it. In this way, the graduated filter can be easily used with lenses from a focal length of approximately 16 millimeters on a full-frame camera (APS-C from approximately 11 millimeters).Up to three slots in the holder accommodate the desired creative filters. When inserting the ND filter, please make sure that the gray filter covers the lens properly so that no light enters sideways.   Metal box for safe storage and transportationThe filter comes with a metal box. This is perfect for transporting or storing the filter well protected. All advantages at a glance: Ideal for landscape photographyHigh-quality optical glass with nano coatingFor more open apertures in daylightAbsolute color neutralityEasy insertion instead of screwing (adjust image detail and insert filter directly)Scratch-resistant multi-coating suppresses reflectionsRed Diamond version, significantly increased break resistanceRounded R5 edges for easier mountingPart of a complete filter system with optionally available adapter rings and filter holder Technical details: Material: glass, multi-coated, scratch resistant, splash water protectedCoating: Nano Pro coatedPower: 0.9 (3 stops)Dimensions (W x L x H): 100 x 100 x 2 mmWeight: 65 g Scope of delivery: 1 x Haida Gray Filter ND 0.9 100 x 100 mm1 x transport box Gray filter calculationThe aperture reduction of ND filters is calculated as follows:The density of ND filters is usually given in steps of 0.3.To obtain the aperture reduction, first multiply the value by 10 and then divide by 3. 0.3 x 10 = 3 | 3 = 1 f-stop0.9 x 10 = 9 | 3 = 3 f-stops0.6 x 10 = 6 | 3 = 2 f-stops1.2 x 10 = 12 | 3 = 4 f-stops1.8 x 10 = 18 | 3 = 6 f-stops3.0 x 10 = 30 | 3 = 10 f-stops3.6 x 10 = 36 | 3 = 12 f-stops4.5 x 10 = 45 | 3 = 15 f-stops  

ND filter plug-in filter ND 1.8 100 mm Haida   Little Stopper Gray Filters ND1.8 are perfect for long exposures during sunsets.   The Haida rectangular ND1.8 gray filter provides shutter speed extension during exposure in a shot by reducing the amount of incoming light on the sensor. The Neutral Density 1.8 filter is a medium-strength gray filter - which is also called a Little Stopper - and is particularly suitable for long exposures of water, sunrises or sunsets. It is also interesting for videographers who want to film with very low apertures. A 6-stop latitude makes the surface look smooth and sleek in long exposures of water. For filmmakers, it allows working with very low f-stops in the midday sun. The ND1.8 gray filter is especially suitable for:Perfect for long exposures of water such as rivers, lakes, ocean, streams or other moving subjects.Videographers allows to work with very low apertures. For example, with apertures around F1.4.When flashing against the sun, for example in portrait photography, the ND filter allows you to extend the camera shutter speed into the range of the flash sync speed. With an ND1.8 you can achieve the following shutter speeds: At 1/2000sec, the shutter speed is extended to 1/30sec.At 1/500sec the shutter speed increases to 1/8secAt 1/125sec, the shutter speed increases to 1/2sec. Multi-coated optical glass reduces reflectionsThe Haida gray filter is made of glass that is ground and polished on both sides for durability and the highest optical quality. The two-millimeter-thin glass filter is free of color casts and offers high resolution. Its special multi-coating reduces the occurrence of reflections and makes the filter insensitive to scratches. Easy to mount with separately available adapter rings and filter holder.For mounting, screw the matching adapter ring from the Haida M10 filter system onto the lens and attach the filter holder to it. In this way, the graduated filter can be easily used with lenses from a focal length of approximately 16 millimeters on a full-frame camera (APS-C from approximately 11 millimeters).Up to three slots in the holder accommodate the desired creative filters. When inserting the ND filter, please make sure that the gray filter covers the lens properly so that no light enters sideways.   Metal box for safe storage and transportationThe filter comes with a metal box. This is perfect for transporting or storing the filter well protected. All advantages at a glance: Ideal for landscape photographyHigh-quality optical glass with nano coatingFor more open apertures in daylightAbsolute color neutralityEasy insertion instead of screwing (adjust image detail and insert filter directly)Scratch-resistant multi-coating suppresses reflectionsRed Diamond version, significantly increased break resistanceRounded R5 edges for easier mountingPart of a complete filter system with optionally available adapter rings and filter holder Technical details: Material: glass, multi-coated, scratch resistant, splash water protectedCoating: Nano Pro coatedStrength: ND1.8 (6 stops)Dimensions (W x L x H): 100 x 100 x 2 mmWeight: 65 g Scope of delivery: 1 x Haida Gray Filter ND1.8 100 x 100 mm1 x transport box Gray filter calculation The aperture reduction of ND filters is calculated as follows:The density of ND filters is usually given in steps of 0.3.To obtain the aperture reduction, first multiply the value by 10 and then divide by 3. 0.3 x 10 = 3 | 3 = 1 f-stop0.9 x 10 = 9 | 3 = 3 f-stops0.6 x 10 = 6 | 3 = 2 f-stops1.2 x 10 = 12 | 3 = 4 f-stops1.8 x 10 = 18 | 3 = 6 f-stops3.0 x 10 = 30 | 3 = 10 f-stops3.6 x 10 = 36 | 3 = 12 f-stops4.5 x 10 = 45 | 3 = 15 f-stops  

ND Filter plug-in filter ND 3.0 100 mm Haida   The rectangular Haida Gray Filter ND3.0 provides shutter speed extension during exposure in a shot by reducing the amount of incoming light on the sensor. The Neutral Density Filter 3.0 filter is a stronger gray filter - which is also called a Big Stopper - and is particularly suitable for long exposures of water in sunlight or for architectural photographers. A latitude of 10 stops makes the surface look smooth and flowing when taking long exposures of water. Architectural photographers use the ND filter for extended long exposures that make moving people, animals or cars in front of buildings, landmarks or in busy squares disappear from the picture. The ND3.0 gray filter is especially suitable for:Perfect for long exposures of water such as rivers, lakes, sea, streams, etc.Architectural photographers often use long time exposure to photograph places deserted, for example. With an ND3.0, you can achieve the following shutter speeds: At 1/2000sec, the shutter speed increases to 1/2sec.At 1/500sec, the shutter speed increases to 2sec.At 1/125sec, the shutter speed increases to 8sec. Multi-coated optical glass reduces reflectionsThe Haida gray filter is made of double-sided ground and polished glass, which stands for durability and highest optical quality. The two-millimeter-thin glass filter is free of color casts and offers high resolution. Its special multi-coating reduces the occurrence of reflections and makes the filter insensitive to scratches. Easy to mount with separately available adapter rings and filter holder.For mounting, screw the matching adapter ring from the Haida M10 filter system onto the lens and attach the filter holder to it. In this way, the graduated filter can be easily used with lenses from a focal length of approximately 16 millimeters on a full-frame camera (APS-C from approximately 11 millimeters).Up to three slots in the holder accommodate the desired creative filters. When inserting the ND filter, please make sure that the gray filter covers the lens properly so that no light enters sideways.   Metal box for safe storage and transportationThe filter comes with a metal box. This is perfect for transporting or storing the filter well protected. All advantages at a glance: Ideal for landscape photographyHigh-quality optical glass with nano coatingAbsolute color neutralityEasy insertion instead of screws (adjust the image section and insert the filter directly)Scratch-resistant multi-coating suppresses reflectionsRed Diamond version, break resistance significantly increasedRounded R5 edges for easier mountingPart of a complete filter system with optionally available adapter rings and filter holder Technical details: Material: glass, multi-coated, scratch resistant, splash water protectedCoating: Nano Pro coatedStrength: ND3.0 (10 stops)Dimensions (W x L x H): 100 x 100 x 2 mmWeight: 65 g Scope of delivery: 1 x Haida Gray Filter ND3.0 100 x 100 mm1 x transport box Gray filter calculationThe aperture reduction of ND filters is calculated as follows:The density of ND filters is usually given in steps of 0.3.To obtain the aperture reduction, first multiply the value by 10 and then divide by 3. 0.3 x 10 = 3 | 3 = 1 f-stop0.9 x 10 = 9 | 3 = 3 f-stops0.6 x 10 = 6 | 3 = 2 f-stops1.2 x 10 = 12 | 3 = 4 f-stops1.8 x 10 = 18 | 3 = 6 f-stops3.0 x 10 = 30 | 3 = 10 f-stops3.6 x 10 = 36 | 3 = 12 f-stops4.5 x 10 = 45 | 3 = 15 f-stops  

Haida M10 100x100mm Slide-in Polarizing FilterThe Haida M10 system features an optical circular polarizing filter.When the polarizing filter is used alone, the filter holder can be rotated in position until the desired effect is achieved. If the polarizing filter is used in combination with a graduated filter, this cannot lead to the 100% effect, since the polarizing filter must be placed 90° to the sun in each case.In order for the polarizing filter to apply its full function to the photo, the angle to the sun must be taken into account. This means that the filter shows its effect when it is placed 90° to the sun. If the sun is shining into the polarizing filter from the front, it will show little or no effect. If the sun is behind the filter, it also shows its effect only slightly or not at all.The Haida M10 Polarizing Filter is a circular polarizing filter and therefore ideal for use with a DSLR camera.It improves your shots with little effort by eliminating reflections on non-metallic surfaces such as glass, water, paint or plastic. In addition, the high-quality coated polarizing filter intensifies contrast and enhances colors for a deep blue sky or rich plant green. All advantages at a glance:Neutral colors and minimizes reflections (not on metals).Optical glassScratch-resistant multi-coatingHigh imaging qualityfor vivid colors and better contrastsCompatibility:This filter fits Haida's M10 filter system.For the technicians:Thickness of the filter approx. 2.0mm Scope of delivery:1 x Haida slide-in M10 C-POL Optical Glass Filter 100x100mm.1 x Filter Box

Haida NanoPro MC Optical Glass Clear Night Filter 100x100mm Optical "light pollution" is a common problem encountered by night photographers.Haida has found a solution to the problem - the CLEAR NIGHT filter .The optical "light pollution" has the potential to make an image less appealing, this can happen überall in the city in the mountains. This then shows up in the image as an "orange" color cast, which has an unfavorable effect für the captured image.Haida's latest development of CLEAR NIGHT filters removes this "light pollution".With the installation of a Haida CLEAR NIGHT filter, the light pollution problem is greatly reduced and it provides you with a good tool for night photography.Thickness of the filter about 2.0mm  Scope of delivery: 1 x Haida NanoPro MC Optical Glass Clear Night Filter 100x100mm 1 x Transport box<?xml:namespace prefix ="o" ns ="urn:schemas-microsoft-com:office:office" />