Haida Thumb Grip for Sony Alpha 7C II silver

Screen protector for your Sony A7CR A7C II a6700 ZV-E1 a7 IV made of glass This custom-fit protective cover offers the display of the Sony A7CR A7C II a6700 ZV-E1 a7 IV reliable protection against dirt, fingerprints, splash water and shocks. It also protects the camera display from scratches. The high degree of hardness of the screen protector reliably protects the display of your Sony A7CR A7C II a6700 ZV-E1 a7 IV The screen protector is made of optical glass and consists of a total of six layers: the actual protective glass, an anti-reflective coating, a hard coating and a shatter protection layer. Nevertheless, the protective cover is only approx. 0.3 mm thick on the camera display. The anti-reflective coating minimizes annoying reflections. This design makes the glass used particularly clear. This ensures a light transmission of 95% and an optimum view of the Sony A7CR A7C II a6700 ZV-E1 a7 IV camera display. The screen protector has a high degree of hardness. This minimizes the risk of damage. The anti-splinter layer makes the screen protector shatter-proof, so that in the event of damage it does not shatter and remains attached to the camera display in one piece. Adhesion through adhesion, no adhesive - touchscreens remain operable The screen protector for the Sony A7CR A7C II a6700 ZV-E1 a7 IV  is not glued on, it adheres independently by adhesion. To attach the screen protector, simply place it on the display and press down carefully. It then adheres to the display and the bubbles disappear. And because it is attached without adhesive, the screen protector can be removed 100% residue-free. Thanks to the adhesion, the screen protector has contact with the entire display surface and not just the edges. The touchscreen, if present, therefore remains operable. Mounting the screen protector Before applying the screen protector to the display of your Sony A7CR A7C II a6700 ZV-E1 a7 IV  you should clean the display thoroughly to ensure optimum adhesion and to prevent dust from getting between the display and the screen protector. Don't worry, the cleaning material is already included in the scope of delivery: a microfiber cloth, a damp cleaning cloth and an adhesive surface to pick up dust particles. Custom-fit for the Sony A7CR A7C II a6700 ZV-E1 a7 IV display The protective cover is cut to fit the display perfectly and does not cover any part of your display, all information is visible even after the screen protector has been fitted. The display can still be folded in, but it may no longer snap into place as it would without the screen protector, unfortunately this varies from camera to camera and cannot be said in general. Für the technicians: Material: optical glassLight transmission: 95%Hardness: 9HThickness: approx. 0.3 mm The screen protector fits the following Sony cameras: Sony A7CR Sony A7C II Sony a6700 Sony ZV-E1 Sony Alpha 7 IV Scope of delivery 1 x display protection glass1 x cleaning cloth1 x wet cleaning cloth1 x dust absorber

Haida Thumb Grip for Sony Alpha 7C II – Black The Haida Thumb Grip for Sony Alpha 7C II in black noticeably improves your camera grip. It mounts on the hot shoe and provides greater stability, a better grip, and increased safety when shooting. The thumb grip from Haida is precision-engineered and specially designed to fit the Sony Alpha 7C II body. Its ergonomic design relieves strain on your hand and allows for smoother camera control, especially when shooting freehand. The high-quality surface finish matches the camera perfectly and protects against scratches. Special features and advantages Noticeably improved ergonomics and secure grip Smoother shots with long exposure times Quick installation without screws Lightweight, robust metal design Does not interfere with any controls Compatibility Sony Alpha 7C II Technical details Material: Aluminum alloy Color: Black Mounting: Hot shoe Weight: approx. 10 g Dimensions: compact, camera-specific Scope of delivery 1x Haida Thumb Grip for Sony Alpha 7C II (Black)

Display protector coated for Sony Alpha 7CR and Alpha 7C IIWith this screen protector you get a screen protector that meets the highest standards and scores with the latest technology. Since it is made of 0.3 mm thick glass, it cannot bubble, unlike conventional films. Thus, the brilliance of your camera display is preserved and it is optimally protected. The screen protector can be removed without leaving any residue, since it is applied according to the principle of self-absorption. The functionality of a possibly existing touchscreen is also preserved. Once you have applied the screen protector, it is no longer necessary to fold the monitor. So you don't have to worry about scratching the display.The advantages of the screen protector at a glance: Perfect protection without bläschenbildung. Self-adhesive & residue-free ablösbar Genuine GLASS - clear visibility and color fastness Only 0.3 mm thick Tempered safety glass 6-layer principle Impact resistant Dust repellent Ageing resistant Für the technicians Japanese optical glass Härte of the glass: 8H Light transmittance: > 90 Absorption volume: 130g / cm ² Strength of the glass: 12 kg/cm² Compatibilityät Sony Alpha 7CR Sony Alpha 7C IIScope of delivery 1x screen protector suitable for Sony Alpha 7CR and Alpha 7C IIThe pictures are sample pictures, the delivered item may differ from the picture.[youtube;xgdX7iKheVQ;560;315]

SmallRig Cage Set for Sony Alpha 7C II and Alpha 7CR When it comes to protecting your Sony a7C II and a7CR cameras, the SmallRig Camera Cage Kit is the perfect solution. These specially adapted cage kits not only offer comprehensive protection, but also numerous mounting points for your individual equipment. In this article, you will learn all about the benefits and functions of this indispensable accessory. Tailored protection and easy access The SmallRig Camera Cage Kit is designed to perfectly protect the Sony a7C II and a7CR cameras while allowing access to all buttons and ports. The cage adapts seamlessly to your camera and is attached with a 1/4"-20 screw on the bottom and an M2.5 screw on the side. This design ensures that your camera sits firmly and securely in the cage. Versatile mounting options With several 1/4"-20 and ARRI 3/8"-16 anti-twist threads, the cage offers numerous attachment points for swivel arms and other accessories. A shoe attachment point allows the mounting of a wireless transmitter, a fill light or a shotgun microphone. The QD (Quick Detach) base also offers the option of attaching a separately available hand or neck strap, which makes handling the camera even more flexible. Quick and secure mounting The base of the cage is equipped with an integrated Arca quick-release plate, which enables quick and easy mounting on a tripod or stabilizer. In addition, M4 threads on the front and bottom provide the ability to attach an optional vertical or horizontal mounting plate. This versatility makes it easy to adapt the camera to different shooting conditions and styles. Rugged and lightweight construction Made from aluminum and stainless steel, the SmallRig camera mount offers a robust yet lightweight construction. These materials ensure that the cage retains its shape even with intensive use, while the weight remains minimal. Inside the cage, rubber padding ensures that the camera is protected from scratches and damage. Technical data camera cage for the Sony a7C II and a7CR Product dimensions: 142 x 93 x 56.4 mmProduct weight: 152±5gMaterial(s): aluminum alloy, stainless steel Scope of delivery: 1 x Käfig 1 x HDMI cable clamp1x user manual Conclusion The SmallRig Camera Cage Kit for the Sony a7C II and a7CR models is an essential accessory for photographers and videographers who want to optimally protect and customize their equipment. With its robust construction, numerous mounting options and customized design, this cage kit offers everything you need for professional shots. Invest in this high-quality accessory and experience the many benefits for your camera. Whether in the studio or on the go, the SmallRig Cage Kit offers the flexibility and security you need to get the best out of your Sony a7C II or a7CR.

SmallRig L-bracket for Sony Alpha 7C II / Alpha 7CR Improved handling for vertical and horizontal shots The L-bracket for your Sony Alpha 7C II or Alpha 7CR 4569 allows you to quickly switch between horizontal and vertical shots and improves your handling. It attaches to the bottom of your camera with a 1/4"-20 screw and positioning pin and has an integrated silicone pad to prevent scratches and twisting.The battery compartment is equipped with a screw key that adapts to the shape of the camera and leaves room for your little finger so you can grip it comfortably. The base plate is covered with genuine leather and fits seamlessly into the camera body; Arca-compatible base and side plates are provided with a lens centre mark. The side plate can be extended for HDMI cable connection and can be adjusted forwards and backwards to allow 180-degree opening and 120-degree rotation of the LCD monitor. Multiple 1/4"-20 threaded holes on the bottom accept quick release plates, tripods and the quick release plate (pad) of your DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro stabiliser. In addition, there is a shoulder strap hole in the lower left corner that can be used together with the shoulder strap hook in the upper right corner of the camera to attach the shoulder strap diagonally so that the camera can be viewed via the LCD monitor. Built-in slotted screwdriver for easy disassembly and assembly. This L-bracket fits the following Sony Alpha cameras: Sony Alpha 7C II Sony Alpha 7CR The technical data of the L-angle: Product dimensions: 133.7 × 82.6 × 57.3mmNet weight: 100g±5gMaterial: aluminium alloy, stainless steel, silicone Scope of delivery: 1 x L-bracket from SmallRig1 x Allen key Note:The LCD screen can only be rotated and adjusted by approx. 120° if it is folded sideways after using the L-bracket. Please extend  the side plate to use the camera port.