Ordered by 2pm, delivered the next day
Guaranteed product availability
Dispatch or collection

Haida X in 1 Magnetic CPL VND Filter 82mm

CHF 202.00*

Expected to be back in stock as of 13 September 2026

Diameter
Product number: HD4902-82
Our benefits
  • own warehouse
  • fast shipping
  • shipping with Swiss Post
  • pick-up after order possible
Our payment methods:

A polariser and a variable ND in one – and magnetically expandable on top: the Haida X in 1 in 82 mm combines a circular polariser with a variable ND of 1 to 5 stops in a single filter body. With the magnetic enhancer filter you extend the range to up to 7 stops when needed. So you control exposure, reflections and saturation in one move – from early morning to bright midday light.

  • CPL-VND filter body: circular polariser plus variable ND 1–5 stops, Ø 82 mm thread
  • Magnetically expandable to 1–7 stops with the Magnetic Enhancer Filter (3–7 stops)
  • 0.1% ultra-low reflection coating – around 60% less reflection than standard coatings, less stray light, flare and ghosting
  • Step-based adjustment with a self-locking lever against accidental shifts and cross shadow

Two filters in one – and a whole magnetic system

Polariser and variable ND combined

The filter body is a CPL-VND: you dial reflections away and lift saturation like a polariser, while smoothly setting the light from 1 to 5 stops. The low starting value is ideal for low-light scenes such as morning, evening and indoor shots.

Magnetically expandable

For stronger outdoor light, add the magnetic enhancer filter (3–7 stops): 1–5 becomes 1–7 stops for fast, flexible exposure control. The front also accepts other NanoPro magnetic filters – such as graduated ND for balancing bright skies or clear-night for cutting light pollution. The magnetic Mist Black 1/4 attaches and removes for a cinematic look, without affecting image quality when it isn't needed.

How this works in practice

Adjust cleanly, lock securely

The step-based adjustment prevents cross-shadowing on large ND jumps and keeps the image clean on full-frame focal lengths from 16 mm. The self-locking lever automatically locks the ND setting so nothing shifts while filming – and lets you fine-tune both VND and CPL angle. The wide-angle structure keeps vignetting at the frame edges low.

What you should know before you order

For lenses with an 82 mm filter thread

This version has an 82 mm thread (wide-angle front Ø 86 mm). Check your lens's filter diameter (marked on the lens cap or lens, usually as a Ø value). The system is also available in 67, 72, 77 and 95 mm.

Focal length recommendation

For clean corners, full-frame focal lengths from 16 mm are recommended; with the magnetic lens hood (HD4907) fitted, 35 mm or above to avoid vignetting.

Technical details at a glance

  • Type: magnetic CPL-VND filter (circular polariser + variable ND)
  • ND range of body: 1–5 stops; with enhancer filter 1–7 stops (3–7)
  • Filter thread: Ø 82 mm
  • Wide-angle end diameter: Ø 86 mm
  • Coating: ultra-low reflection, below 0.1% reflection
  • Adjustment: step-based (stop locking slot) with position indicator
  • Self-locking lever: locks ND, adjusts VND and CPL angle
  • Magnetic system: compatible with enhancer filter, Mist Black 1/4, NanoPro magnetic filters (graduated ND, clear night), magnetic cap and lens hood HD4907
  • Recommended: full-frame from 16 mm (with lens hood from 35 mm)
  • Model: HD4902

Scope of delivery

  • 1 x Haida X in 1 filter body (CPL-VND, 1–5 stops), 82 mm
  • 1 x Magnetic Enhancer Filter (3–7 stops)
  • 1 x Magnetic Mist Black 1/4 filter
  • 1 x magnetic adapter ring
  • 1 x magnetic lens cap
  • 1 x filter case
Properties "Haida X in 1 Magnetic CPL VND Filter 82mm"
Diameter: 82mm
Manufacturer "Haida Filter"

The manufacturer Haida specializes in the production of high quality filters for various uses in photography. Haida filters are all made of optical glass. Haida produces filter holders as well as screw filters. The filter holders for plug-in filters are available in the width of 100 mm and 150 mm in our assortment. There are also matching Haida adapter rings in different sizes. Of course, Haid also manufactures ND and GND filters in various dimensions. The Haida ND filters are mainly used in landscape photography. When it comes to coating, the Haida company uses the NanoPro MC designation for multi-coated surfaces, with the NanoPro series being the most current version. Haida systems are available for all sizes of lenses from different manufacturers. The kit Haida M10 II system for 100 mm should not be missing on any photographer's wish list. Haida filters can be used especially well for shooting with water. Haida products do not need to be afraid of comparison with other products such as those from Lee. The ND or gray filters are available in different strengths. So that not too much time is lost in post-processing, the filters from Haid are color-neutral. With the Haida M10 series, you can make perfect long exposures. The corresponding 100 mm graduated filters can be mounted high or low in the filter holder. For ultra-wide angles, Haida also has a corresponding solution in its range, namely the M15 system. With a width of 150 mm, these filters cover a wider angle of view compared to the 100 mm. If such an ultra-wide angle is on your wish list, please be sure to note the Haida M15, there are various adapters for the most diverse combinations. Haida also has rear lens filters, these mount in the lens bayonet and are available in various strengths. Simply put, you can find the right filter for every application in Haida's range. Whether these are then used in the city or in the countryside, it does not matter. The products are also accompanied by brochures or manuals in English that give an overview of the entire range. 

 

Related links of the manufacturer

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Related products

Only 3 available
New
Haida HD4907 magnetic lens hood 82mm
Haida Magnetic Lens Hood for X in 1 82 mm
Diameter: 82mm
Less stray light, more contrast: the Haida HD4907 is the dedicated magnetic lens hood for the Haida X in 1 filter system in the 82 mm size. It attaches magnetically to the front of the filter body, shields light coming in from the side and reduces flare and stray light in backlit scenes – on and off in seconds, with no threads. Magnetic lens hood for the Haida X in 1 system, matched to the 82 mm filter size Blocks side stray light and reduces flare and ghosting Tool-free magnetic attach and release Front accepts the Magnetic Enhancer Filter and NanoPro magnetic filters of the same size Shield stray light – magnetically fast Clean contrast in backlight The hood shades light that hits the front element at an angle, keeping flare and contrast loss out of the image. The result is richer colours and a cleaner look – especially in low sun and backlit situations. Magnetic and stackable The hood aligns with the filter body and clicks in magnetically. Its front stays usable: you can attach the Magnetic Enhancer Filter and other NanoPro magnetic filters of the same size there – so you keep your filter workflow, with added stray-light shielding. What you should know before you order For the X in 1 system in 82 mm This hood is matched to the 82 mm version of the Haida X in 1 (HD4902). It is also available in 67, 72, 77 and 95 mm – choose the size to match your X in 1 filter body. Focal length recommendation With the hood fitted, a focal length of 35 mm or above is recommended to avoid vignetting. On very wide focal lengths the hood may intrude into the field of view. Technical details at a glance Type: magnetic lens hood (accessory for the X in 1 system) Fits: Haida X in 1 filter body (HD4902), 82 mm size Attachment: magnetic, tool-free Front: compatible with Magnetic Enhancer Filter and NanoPro magnetic filters of the same size Function: shields stray light, reduces flare and ghosting Recommended focal length with hood: from 35 mm Model: HD4907 Scope of delivery 1 x Haida HD4907 magnetic lens hood, 82 mm

Variants from CHF 22.00*
CHF 25.00*