Peak Design Cuff Leather Hand Strap Black

Peak Design Anchor Mount   Attach your Peak Design strap (or any standard OEM neck/hand strap) directly to the bottom of your camera in the most low-profile, unobtrusive way possible. Unlike a tripod plate, Anchor Mount is so small and slim that it won’t hinder access to battery compartments or flip screens. Plus, when you connect one end of your strap to Anchor Mount your camera will hang with the lens facing downward—this gives you far more stability and comfort when using longer lenses. Ultra-strong machined/anodized aluminum construction. Note that Anchor Mount is not tripod or Capture compatible. We often recommend attaching 1 end of your PD strap to your camera's side strap lug (opposite the grip) and the other end to the bottom. These 2 connection points let the camera hang with the lens facing down for greater comfort and stability, especially with longer primes and zooms. Anchor Mount is the most low-profile, unobtrusive connection point available for PD Anchors and standard camera straps.   Works with all pd StrapsAttach PD Anchors to increase your carry options with any of our straps. Compatible with all versions of our Anchors and straps.   Works with oem StrapsAttach any standard camera neck strap or wrist strap. Works with strap ends up to 11mm wide.   Twist resistantUltra-secure 4mm hex drive with anti-twist pad.   Fits any cameraScrews into any standard 1/4""-20 tripod socket.   Super strongRugged, weatherproof machined/anodized aluminum construction. Note: Anchor Mount is not compatible with tripods or Capture system. If you frequently use a tripod or Capture, check out our Standard Plate.     Whats in the box1 x Anchor Mount1 x 4mm hex key   MaterialsAnodized aluminum plate with hard rubber anti-twist pad, turned/machined stainless steel hex-drive screw   WeightUnpackaged: 18 g (.71 oz)   SizeLength: 30 mm (1.2 in) Width: 20 mm (.79 in)   Strength ratingCan withstand well over 200 lbs (90 kg), making Anchor Mount safe for use with the largest of professional cameras.   WarrantyGuaranteed for life.  

Peak Design Cuff Leather Wrist Strap Light Brown The Peak Design Cuff Leather Wrist Strap in light brown is an elegant and secure way to carry your camera on your wrist. It reliably protects your camera from falling and ensures a high level of comfort for everyday use and longer photo shoots. The wrist strap is made of high-quality genuine leather and combines timeless design with functional technology. Thanks to Peak Design's integrated anchor loop system, you can quickly and securely attach or remove the Cuff from your camera. The slim profile is unobtrusive and ideal for compact cameras as well as mirrorless systems. The leather surface feels pleasant to the touch, adapts to your hand over time, and develops a unique patina. The thoughtful design keeps your camera within easy reach at all times. Special features and advantages High-quality genuine leather for a pleasant feel Anchor loop system for quick changes Discreet, compact design Secure hold without restricting freedom of movement Suitable for everyday use and travel. Compared to classic nylon loops, the leather version offers a discreet look and is particularly comfortable to wear. Compatibility System cameras Compact cameras Cameras with anchor loops or strap eyelets Technical details Material: Genuine leather, nylon anchor Color: Light brown Adjustable: Yes Weight: approx. 25 g Attachment: Anchor loop system Scope of delivery: Peak Design Cuff leather hand strap, light brown Two anchor loops

Peak Design Long Leather Camera Strap in Amber This high-quality leather camera strap combines stylish design with maximum comfort. Thanks to its durable materials and thoughtful construction, you can carry your camera safely and elegantly—ideal for everyday use or professional shoots. The leather camera strap in amber impresses with its minimalist, modern design without obtrusive seams or large metal fittings. The high-quality leather sits comfortably on your shoulder and adapts to your body, while the low-profile hardware holds your camera securely. The strap is sturdy, flexible, and durable, perfect for use with mirrorless cameras or DSLR systems. Features and benefits Elegant, timeless amber leather for style-conscious photographers Slim profile avoids annoying bulkiness Easy to attach thanks to integrated fasteners Keeps your camera handy at all times without restricting your freedom of movement The strap is universally applicable and compatible with: Digital single-lens reflex cameras (DSLR) Mirrorless system cameras Technical details Length: 134cm Material: Premium leather Weight: approx. 61 g Color: Amber Low-profile metal hardware integrated Scope of delivery 1 × Peak Design leather camera strap, long, amber 2 × Quick release adapters

Replacement Anchor Loops for Peak Design Camera Straps and Wrist Loops The four anchor loops are the perfect complement for the Slide, Slide Lite and Leash camera straps, the Clutch hand strap and the Cuff wrist strap. This allows Peak Design products to be used for multiple cameras. It eliminates the hassle of remounting. Shallower lugs and stronger anchor cords. The new features of this kit are just great. For example, in addition to the material - aluminum - the fasteners are a quarter flatter than their predecessors. The anchor loops have been equipped with slightly beveled washers, which makes it much easier to snap them into the plug-in closures. The very stable loops can be easily attached in small round eyelets or narrow flat eyelets - without split rings. The anchor loops are maximally compatible with Peak Design products. Resistance and resilience - thanks to Dyneema cord. Ideal to withstand high loads, the cords of the anchor loops were made of the resistant polyethylene-based plastic - Dyneema. This allows the anchor cords to withstand loads of up to 90 kg. Color coding for timely replacement of worn anchor loops A red core in the anchor loops is used for color coding. During intensive use, the material can get tired, if the red core is visible, it means: this anchor loop should be replaced. Technical details Material: Dyneema, thermoplastic materialThe diameter of the "cord" is: 1.7mm Color:  black Scope of delivery 4 x Anchor attachment loops 3rd generation

Replacement Anchor Loops for Peak Design Camera Straps and Wrist LoopsThe four anchor loops are the perfect complement for the Slide, Slide Lite and Leash camera straps, the Clutch hand strap and the Cuff wrist strap. This allows Peak Design products to be used for multiple cameras. It eliminates the hassle of remounting. Shallower lugs and stronger anchor cords.The new features of this kit are just great. For example, in addition to the material - aluminum - the fasteners are a quarter flatter than their predecessors. The anchor loops have been equipped with slightly beveled washers, which makes it much easier to snap them into the plug-in closures. The very stable loops can be easily attached in small round eyelets or narrow flat eyelets - without split rings. The anchor loops are maximally compatible with Peak Design products. Resistance and resilience - thanks to Dyneema cord. Ideal to withstand high loads, the cords of the anchor loops were made of the resistant polyethylene-based plastic - Dyneema. This allows the anchor cords to withstand loads of up to 90 kg. Color coding for timely replacement of worn anchor loopsA red core in the anchor loops is used for color coding. During intensive use, the material can get tired, if the red core is visible, it means: this anchor loop should be replaced. Technical detailsMaterial: Dyneema, thermoplastic materialThe diameter of the "cord" is: 1.7mm Color: red blackScope of delivery4 x Anchor attachment loops 3rd generation

Peak Design Cuff Leather Wrist Strap in Amber The Peak Design Cuff Leather Wrist Strap in Amber is an elegant and secure way to carry your camera on your wrist. It reliably protects your camera from falling and ensures a high level of comfort for everyday use and longer photo shoots. The wrist strap is made of high-quality genuine leather and combines timeless design with functional technology. Thanks to Peak Design's integrated anchor loop system, you can quickly and securely attach or remove the Cuff from your camera. The slim profile is unobtrusive and ideal for compact cameras as well as mirrorless systems. The leather surface feels pleasant to the touch, adapts to your hand over time, and develops a unique patina. The thoughtful design keeps your camera within easy reach at all times. Special features and advantages High-quality genuine leather for a pleasant feel Anchor loop system for quick changes Discreet, compact design Secure hold without restricting freedom of movement Suitable for everyday use and travel. Compared to classic nylon loops, the leather version offers a discreet look and is particularly comfortable to wear. Compatibility System cameras Compact cameras Cameras with anchor loops or strap eyelets Technical details Material: Genuine leather, nylon anchor Color: Amber Adjustable: Yes Weight: approx. 25 g Attachment: Anchor loop system Scope of delivery: Peak Design Cuff leather wrist strap, amber Two anchor loops

Peak Design Long Leather Camera Strap in Black This high-quality leather camera strap combines stylish design with maximum comfort. Thanks to its durable materials and thoughtful construction, you can carry your camera safely and elegantly—ideal for everyday use or professional shoots. The leather camera strap in black impresses with its minimalist, modern design without obtrusive seams or large metal fittings. The high-quality leather sits comfortably on your shoulder and adapts to your body, while the low-profile hardware holds your camera securely. The strap is sturdy, flexible, and durable, perfect for use with mirrorless cameras or DSLR systems. Features and benefits Elegant, timeless black leather for style-conscious photographers Slim profile avoids annoying bulkiness Easy to attach thanks to integrated fasteners Keeps your camera handy at all times without restricting your freedom of movement The strap is universally applicable and compatible with: Digital single-lens reflex cameras (DSLR) Mirrorless system cameras Technical details Length: 134cm Material: Premium leather Weight: approx. 61 g Color: Black Low-profile metal hardware integrated Scope of delivery 1 × Peak Design leather camera strap, long, black 2 × Quick-release adapter