Peak Design Outdoor Sling 2L black BAS-2-BK-1

Camera strap Peak Design Leash black The Leash Black from Peak Design is an optimised camera strap for small cameras. The essentials: Flatter buckles, slightly tapered discs on the matching anchor loops that make it easier to engage and thin buckles for small straps. The new and extremely flat anchor mount plate for attaching the Leash Black to the tripod thread of the camera as well as improved material properties, aluminium bar buckles and Hypalon finger loops for adjusting the optimum strap length round off the innovations. Shoulder strap, neck strap or sling strap – extremely versatileThe Leash Black is a real all-rounder thanks to its various functions. It can be used as a shoulder harness, neck harness or sling harness. The Leash Black as a sling strap, i.e. worn diagonally around the upper body with the camera hanging at the side of the body, offers the greatest wearing and operating comfort. The camera is in your hand in a flash and snapshots are safely in the box. For smaller camera types such as SLR or DSLM camerasThe Leash Black is ideal for smaller camera types such as entry-level DSLRs, mirrorless system cameras or compact cameras. Perfectly thought-out and secure - thanks to the anchor loop and plug-in fastenerLike all other Peak Design straps, the Cuff-Black also has a clever fastening system consisting of a plug-in fastener on the wrist strap and a sturdy anchor loop for attaching to the camera. Both components can be easily separated from each other despite their extremely secure connection. This makes it quick and easy to attach and detach from the camera. The hand strap can either be attached to a belt or directly to the camera tripod thread using an adapter. Easier engagement of the anchor loops thanks to thin laces and bevelled discs The plug-in fastener of the Cuff-Black alone is a quarter flatter than the previous Cuff. The bevelled discs on the anchor loops make it easier to engage the plug-in fastener. The thin but very sturdy loops are easier to attach to cameras with narrow flat or small round lenses, making the use of split rings superfluous. These new anchor loops fit into the buckles of both older products and the 2017 Leash camera strap. Extremely flat camera plate for attachment to the tripod thread of a cameraWith the small and very flat anchor mount plate, the Leash Black can be attached to the tripod thread of your camera. Compared to interchangeable plates, this plate does not add much bulk. The anchor loops are attached to the aluminium plate using two eyelets. Space-saving storage Since the Leash Black is flat and narrow, it can be rolled up and stowed in a jacket pocket if required. The leash is narrow and flat. Adjust the optimum harness length thanks to aluminium bar buckles and Hypalon loopsThe aluminium bar buckles and Hypalon loops of the Leash Black make it quick and easy to adjust the optimum harness length. Ultra-smooth and torsion-resistant nylon fabric ensures better durability thanks to a tighter weaveThe material and design of the cuff loop have been optimised – a new, tightly woven nylon fabric is extremely durable. The smooth surface provides a comfortable feel and glides gently along clothing when used as a sling strap. The improved material does not twist as quickly. The load points have been reinforced and the buckle is made from a mix of metal and plastic. The aluminium stopper and the Hypalon application on the outside of the loop round off the high quality. Technical detailsMaterial: nylon, aluminium, HypalonColour: blackLength: approx. 81-145 cm (adjustable)Belt width: approx. 1.9 cmLoad capacity: 90 kg (anchor loops) Scope of delivery1 strap, 4 anchor loops, 1 anchor mount camera plate  

Für belt or strap - ultra-stable camera clip Super practical and comfortable. With the Capture Clip V3 Clip camera clip, the camera can be carried on a rucksack strap, shoulder strap, trouser belt or waistband. This has the advantage that both hands are free and the camera does not dangle even when moving around a lot, but remains firmly in position. The Capture Pro Clip is the perfect companion for everyday life and especially for outdoor tours such as climbing or cycling. It is suitable for SLR cameras, compact cameras and mirrorless system cameras. Easy grip for spontaneous snapshots The Capture Clip V3 Clip is easy to handle. Once the clip has been positioned on the belt or strap, all you have to do is snap the camera plate attached under the camera into the multi-secured holder and you're done. For spontaneous snapshots, the camera can simply be removed from the Capture Clip V3 clip and then reattached to the clip. Incl. PROplate camera plate – combines the advantages of all previous camera plates The advantages of the ARCAplate, DUALplate and MICROplate camera plate attachments are all combined in the PROplate. Thanks to the all-round Arca profile in the basic configuration, this camera plate can always be inserted into the clip offset by 90 degrees in all four directions. This means that the camera lens can always be inserted facing downwards. The great thing about this is that the Capture-Clip camera plate does not need to be replaced with a corresponding interchangeable plate. Thanks to its compatibility with the quick-release coupling, the camera can be attached directly to a tripod from the Capture Clip. However, thanks to its width of 5.2 cm, the PROplate has a stable and suitable support surface for large SLR cameras.  PROplate camera plate with eyelets for the anchor loops of the leash, cuff, slide and clutch The anchor loops from the Peak Design System can be attached to four eyelets in the corners of the PROplate. This enables quick and flexible movement between the Capture Clip V3 Clip, slides such as the Clutch and Cuff hand loops and the Slide and Leash straps. For use as a tripod head with quick-release coupling - tripod thread on the back To ensure that the Capture Clip V3 Clip can be attached to almost any camera tripod or panhead, there is a removable ¼-inch adapter on the 3/8-inch internal thread on the back. This also allows it to be used as a quick-release coupling for a ball head. Protects against falling out or theft - multiple protection on the camera plate holder To prevent the camera from being stolen or falling out of the Capture Clip V3 Clip, the camera plate can be secured in multiple ways. The grid lock prevents the camera from slipping out of the holder; the camera can only be removed by pressing and holding the red release button. The release button itself can be locked by turning the upper part 90 degrees, and the camera plate can also be clamped in the holder with a locking screw. Fits belts and straps with a thickness of up to 1.3 cm and a width of up to 7.6 cm The Capture Clip V3 clip can be attached to all belts and straps with a maximum thickness of 1.3 cm and a width of 7.6 cm. The Capture Clip V3 Clip is easy to attach: the unscrewed clip is unfolded, then attached to the belt or strap and finally screwed back on using the two clamping screws. Technical details Material: aluminum, etc.Dimensions: approx. 2.0 x 8.3 x 4.0 cmWeight: approx. 70 g (without camera plate)Carrying capacity: approx. 90 kg (200 lbs.)Camera screw: 1/4 inch Scope of delivery 1 camera clip V3 in black1 clamping plate (Arca-Swiss compatible)1 hexagon socket wrench Note The Capture Clip v3 from 2017 can accommodate all Peak Design camera plates released up to that point. However, the new flatter standard plate plates cannot be used for older Capture Clip models. Although these plates can be inserted, the distance between the top of the plate and the top of the clip would be too small to insert the plate into the clip with a camera mounted on it.

Peak Design Cuff in black   Total peace of mind in a tiny, low-profile package. The all-new Cuff is the most elegant, unobtrusive way to protect your camera from accidental drops. Quickly and securely connects to any camera, binoculars, or other device using our unique Anchor Link system. Wrist loop magnetically locks in the open position, or comfortably cinches down on your wrist for added security. New all-custom aluminum hardware. When not in use, Cuff stores as a bracelet for quick accessibility.TOTALLY REDESIGNED New adjusterAnodized aluminum adjuster locks Cuff in an open position or cinches to your wrist. Magnets, yo!Adjustable magnet lets you wear Cuff as a bracelet when not in use. Slimmer Anchor CordsThinner Anchor cords fit through more camera strap eyelets, yet still hold 200 lbs (90kg) each. New anchor shapeAngled shape enables effortless 1-handed connection. Upgraded WebbingStrap has increased durability, smoothness, and twist resistance. Keep open or cinchedNew adjuster hardware lets you keep Cuff locked in an open loop so you can easily fit your hand through. Pull the adjuster to cinch Cuff around your wrist for more security. Automatic drop protectionIf you drop your camera, Cuff automatically cinches down on your wrist, which in turn will warm the cockles of your heart. Not just for CamerasConnect Cuff to binoculars, GoPros, rangefinders, tools, and more. Ultralight and compactKeep Cuff on your camera, on your wrist, or in your pocket. Cuff uses ultralight materials and hardware for total security with a minimal footprint. Super strongStrong enough to hold any pro camera/lens/accessory combo. Anchors each hold over 200lbs (90kg) and feature extreme abrasion-resistance. Fits (almost) allCuff's wrist loop can fit palms that are over 5 in (13 cm) wide. Them's some big hands right there.     [youtube;xKojw12egwg;560;315]     Whats in the Box2 x Anchors (3rd generation, thinner anchor cords)1 x Cuff Camera Wrist Strap1 x Microfiber Pouch   Wrist loop sizeDiameter when open: 9.7 cm (3.82 in), but easily fits hands 5+ inches wide diameter when cinched: 4.5 cm (1.75 in)   Strap Width19 mm (0.75 in)   MaterialsStrap: Seatbelt-style nylon webbing, anodized aluminum adjuster hardware, Hypalon® and leather accents (leather on Ash only) Connectors: Glass-reinforced nylon Links with stainless steel springs, 2-layer anti-abrasion woven thermoplastic Anchor cord, thermoplastic Anchor overmolding   Strength ratingAnti-abrasion thermoplastic-corded Anchors can withstand over 200 lbs (90 kg), making Cuff safe for use with the largest of professional cameras.   Magnet ratingAdjustable magnetic clasp (for bracelet configuration) is safe for use around electronics.   WarrantyGuaranteed for life.  

Peak Design Slide black Versatile camera strap - neck strap, shoulder strap or sling strap With its enormous versatility, the Slide is the flagship of the Peak Design strap system. The Slide is a real all-rounder as it can be used as a neck strap, shoulder strap or sling strap. It is also ideal as a camera strap for SLR cameras or mirrorless system cameras. Slide as a sling strap - convenient and quick camera access The Slide Lite as a sling strap, i.e. worn diagonally around the upper body with the camera hanging on the side of the body, offers the greatest wearing and operating comfort. The camera is at hand in a flash and snapshots are safely in the box. Stable position when used as a sling strap or shoulder strap When the Slide is used as a shoulder strap or sling strap, the camera attached to the strap does not dangle around thanks to its stable position. Perfectly thought-out and secure - thanks to the anchor loop and buckle The Slide has a clever fastening system consisting of buckles on the actual strap and two sturdy anchor loops for attaching to the camera. Both components can be easily separated from each other despite the extremely secure connection. This enables quick and easy attachment and detachment from the camera. The loops can be attached either to a strap or directly to the camera tripod thread using the enclosed camera plate. Anchor loops also compatible with other Peak Design products Since the anchor loops are also compatible with the plug-in fasteners of other Peak Design products, the various straps and hand loops can be easily interchanged. Simple handling for great effect: remove the Slide camera strap from the anchor loops on the camera and simply clip in another strap or hand strap. Attach the Slide to the tripod thread of a camera using an Arca-compatible camera plate The Slide can be attached to the tripod thread of the camera using the standard plate camera plate. This turns the strap into a sling strap. The anchor loops are attached to the plate with an all-round Arca profile using two eyelets. This allows the camera to be quickly attached to a panhead with a compatible quick-release coupling. The camera plate can also be used for the CapturePro and Capture Clip. Belt width and inner padding = high wearing comfort without bulk The weight distribution is optimised thanks to the width of the slide of 45. A thin inner padding prevents it from cutting into the skin and ensures a high level of comfort. Thanks to the relatively wide support surface in combination with the integrated padding, the Slide is extremely comfortable to wear and can even be used for a heavy professional SLR camera. Smooth = sling strap, non-slip = shoulder strap The different textures of the Slide have a good reason: if it is used as a sling strap, the strap glides gently along the clothing. When used as a shoulder strap, the side with the non-slip rubber strip prevents the Slide from slipping too easily or sliding off the shoulder. Perfect upper material – Tear-resistant and quite smooth The material of the Slide is made of ballistic nylon. Similar to a seatbelt in a car, this material is very resistant and tear-proof. Constant contact with clothing is harmless, as the material is gentle on the material thanks to its smooth and soft texture. Fold-out metal straps – for adjusting the optimum belt length With the help of two fold-out metal brackets on the slide, the belt length can be quickly and easily adjusted to the optimum length - even single-handedly. Technical details Material: ballistic nylonLength: 99 - 137 cm (adjustable)Width: 4.5 cmWeight: 171 gCapacity: up to 90 kgColour: blackStandard plate: made of aluminium, 38 x 38 x 14 mm, with 1/4-inch camera screw Scope of delivery 1 SL-BK-3 slide carrying strap, 4 micro anchor loops, 1 anchor mount with 1/4’ connection, 1 Allen key (4 mm)

Peak Design Everyday Backpack 30L v3 Black – Your smart everyday and camera backpack The Peak Design Everyday Backpack 30L v3 in black is the ideal companion for ambitious photographers, frequent travelers, and minimalists. Whether for your camera equipment or as a stylish everyday backpack, this backpack impresses with its thoughtful design, flexible layout, and uncompromising functionality. The Everyday Backpack 30L v3 from Peak Design was developed with the aim of combining maximum functionality with modern, urban design. The new v3 version offers improved materials, more ergonomic straps and a redesigned divider system for even more organisation. Thanks to FlexFold dividers, the interior can be customised to suit your needs – whether you're carrying a camera, drone, lenses or personal items. Side zippers allow quick access without opening the backpack completely. Water-repellent 100% recycled 400D nylon reliably protects your contents from the elements. The MagLatch closure technology ensures quick and secure closure of the main compartment – even when fully loaded. Special features and advantages FlexFold dividers: Customizable organization of your equipment MagLatch closure: Quick access & expandable volume Side quick access: Suitable for left and right-handed users Laptop compartment (up to 16"): Padded & separated from the main compartment Comfortable straps: Ergonomic, breathable & with chest strap Compared to similar models, this backpack scores with its clever design, versatile uses and high-quality workmanship – ideal for urban photographers with high standards. Compatibility Suitable for all common DSLR and mirrorless camera systems (e.g. Canon, Nikon, Sony, Fujifilm, Panasonic) Also suitable for drones such as DJI Mavic Air/Pro Technical details Volume: 22–30 liters, expandable Material: 400D nylon canvas (recycled), water-repellent External dimensions: approx. 62 x 36 x 19 cm Internal dimensions of main compartment: approx. 60 x 30 x 16 cm Weight: approx. 2.1 kg Laptop compartment: up to 16 inches Color: Black Scope of delivery 1x Peak Design Everyday Backpack 30L v3 Black 3x FlexFold dividers 1x chest strap 2x external carrying straps 1x key clip