Dual V-Mount Charger for Sony BP-95W by Patona

Godox VL200 II low noise LED continuous light Flexibility is the maxim of the Godox VL 200 II The LED continuous light, which can be used indoors and outdoors, is not only interesting for hobby photographers. Professionals on the film set also appreciate its day-bright luminosity, handiness and operation via remote control. For outdoor shoots, you can use the battery-powered continuous light. Daylight conditions with the long-life LED light source Using continuous light is not only useful in video production. In photography, you have the illumination continuously under control with continuous light instead of flash light. This allows you to focus your attention on the photography itself. For continuous light photography, Godox VL 200 II offers you lighting conditions that come very close to daylight, even under studio conditions. The color temperature of the lamp is 5600 Kelvin and remains constant over time. With a CRI and TLCI value of 95, the Godox VL 200 II is one of the luminaires with highly precise color rendering. Even skin tones can be reproduced realistically with its help. In addition, the continuous light convinces with all the advantages that LED lamps basically bring. The luminaire is extremely energy-efficient: the LED continuous light requires only 215 watts for the power of the 2000 W halogen lamp that was previously standard. Its service life of up to 100,000 hours is significantly longer than that of its predecessors. Because LED lights hardly generate any heat, the ventilating cooling system can also work so quietly that you will only hear it in a whisper. Especially important for photographers and film producers: The LED light produces its light flicker-free.   Flexible lightweight with remote control   The particularly low weight of the permanent light at 2.9 kilograms is explained by the fact that the light control and battery plate are housed in a separate control box. This gives you flexibility for the ideal positioning of your lighting. Umbrellas for different light modifications can be attached directly to the device: The Bowens-style reflector mount is suitable for a wide range of models. The 5/8 inch base allows you to mount the continuous light on common lamp tripods or booms.   For larger setups, you can save yourself some long walks by controlling the continuous light via radio remote. In addition to the corresponding antenna, another one for Bluetooth reception is included. It allows you to control the light from Android or iOS devices instead of wirelessly using the Godox Photo app. If that's too much for you, you can simply use the Godox RC-A6 remote control. Another option is of course the control via the controller with LCD display. In this way you can adjust the light output in 10-watt increments or 1-percent nuances to the conditions on site.   Independent of the mains with the battery-powered continuous light   A special feature of the Godox VL200 II is that you can use it without a power supply. The LED continuous light photography battery not only has a 4 -pin XLR power cable, but can also be operated via two optional V-mount batteries. Protective cap and carrying bag are included.   All advantages at a glance:   -No disturbing flash light-Continuous control over the illumination-Light output comparable to 2000 watt halogen lamp-Natural color rendering - CRi approx. 96-Power adjustment via rotary control -Informative LCD display-Remote controllable with radio remote controls RC-A6 and Smarthphone App-Low power consumption, constant color temperature, long service life-Flicker-free light characteristic is ideal for video recording-Can also be operated via V-mount batteries without power connection, 2 batteries are required   Technical details:   Light source: LED, 100,000 h lifetimePower: 215 WLuminous flux with reflector: 88900 Lux 1mLuminous flux without reflector: 7400 Lux 1m Color temperature: 5600 ± 200 KColor rendering index / CRi: approx. 96Television Lighting Consistency Index / TLCI: approx 96Cooling: FanAdditional features: LCD display, channel selection, umbrella holder, Bowens S-type bayonet, carrying handle, tripod mount (5/8")Remote control: built-in radio receiverPower supply: 100 - 240 V, 50 / 60 Hz, fuse 2 APower supply: 2 x V-mount battery (optional)Dimensions: 30,0 x 14 x 18 cm (L x W x H)Weight light body : 1,77 kgWeight controller : 1,19 kg   Scope of delivery:   1 x Godox VL200 II 215 W continuous light1 x controller1 x power supply1 x protective cap1 x reflector1 x power cable 1 x connection cable1 x remote control 1 x carrying bag       You can find all the technical details in the Godox VL200II instruction manual in English

V-Mount Battery Patona Platinum Nano V95 with 95Wh RED ARRI   The new PATONA NANO V-Mount batteries have an approximately 30% smaller design with higher performance data compared to normal V-Mount batteries. A 4-stage LED display gives you an overview of the remaining capacity at all times. The P-Tap / D-Tap output can be used for lamps and many other external devices. The USB output can also be used to charge smartphones and tablets, for example. Technical data: Voltage: 14.8 VoltCapacity: 6400mAh / 95WhCell type: Li-IonNumber of cells: 8 x 18650 LGMax. Power rating: 11AOverload protection: 12AP-Tap/D-Tap Output voltage: max. 100W, 12.0V/8,3A / 16,8V/5,95AUSB connection: normal mode 5V/2.4A / fast charging mode: 9 V/2A maximumWeight: 508 grSize: 75 x 105 x 50mmBrand: Patona Platinum The battery is suitable for the following V-Mount camera types: Sony DSR 250P, 600P, 650P, 652P HDW 800P PDW 850 DSR-250P, DSR-600P, DSR-650P, DSR-652P, HDW-800P, PDW-850, V-Mount This battery replaces the following original batteries: Sony BP150w, BP-150w, BPFL75, BP-FL75, BPFLX75, BP-FLX75, BPL40A, BP-L40A, BPL60, BP-L60, BPGL65, BP-GL65, BPGL95, BP-GL95, BPGL95A, BP-GL95A, RED V-mount / Bebob Vcine V155RM-CINE batteries Here you will find an overview of the air transport regulations for Li-Ion batteries.  Scope of delivery: 1x V-Mount battery Patona Platinum Nano V190 with 189Wh RED ARR

Godox Flexible surface luminaire - FL60 Flexible LED area light, the colour temperature can be infinitely adjusted from 3300K to 5600K, as can the brightness. This is regulated via an external control unit, which can be controlled via the remote control or via Bluetooth via the Godox app "GodoxPhoto". The control unit can either be connected to the mains via a cable or operated via a V-Mount battery such as BP-190WS or BP-95S. The Godox FL60 LED is with its 60W and a light area of 30x45cm the ideal, and with 2.87 Kg, a light companion for the road. Thanks to the flexibility of the Godox FL panels, they can be adapted to different conditions, the light construction of the foldable X-Mount allows a quick assembly & disassembly during video shoots or photo shoots. Due to the compact transport mass and the included carrying bag the ideal light for on-the-go shootings. Technical data: FL60 power output: 60WColour temperature: 3300K - 5500K (+/- 200K, <1800 LUX)TLCI: >98CRI: >96Light regulation: 10% - 100% SteplessBattery: V-MountCurrent: AC100V-240V, 2.5A (DC16.8V/4.2A)Operating temperature: -10° - 45Range RC-A5: 30mBluetooth range: 50mDimensions LxW: 30cm X 45cmWeight: 2.87 Kg Scope of delivery:1x Godox FL LED1x control unit1x tripod adapter1x power supply unit and mains cable1x LED holder1x carrier bag   You can find all the technical details in the Godox FL60 instruction manual in English

Godox Flexible surface luminaire - FL150S   Flexible LED area light, the colour temperature can be infinitely adjusted from 3300K to 5600K, as can the brightness. This is regulated via an external control unit, which can be controlled via the remote control or via Bluetooth via the Godox app "GodoxPhoto". The control unit can either be connected to the mains via a cable or operated via a V-Mount battery such as BP-190WS or BP-95S. The Godox FL150S LED is with its 150W and a light area of 60x60cm the ideal, and with 3.9 Kg, a light companion on the go. Thanks to the flexibility of the Godox FL panels, they can be adapted to different conditions, the easy construction of the foldable X-Mount allows a quick assembly & disassembly during video shoots or photo shootings. Due to the compact transport mass and the included carrying bag the ideal light for on-the-go shootings.   Technical data: FL150S   Power output: 150WColour temperature: 3300K - 5500K (+/- 200K, <1800 LUX)TLCI: >98CRI: >96Light regulation: 10% - 100% SteplessPerformance: <4300Lux (1m in dark room)Battery: V-MountCurrent: AC100V-240V, 2.5A (DC16.8V/4.2A)Operating temperature: -10° - 45Range RC-A5: 30mBluetooth range: 50mDimensions LxW: 60cm x 60cmWeight: 3.9 Kg   Scope of delivery:1x Godox FL150S LED1x control unit1x tripod adapter1x power supply unit and mains cable1x LED holder1x carrier bag     You can find all the technical details in the Godox FL150S instruction manual in English  

Godox Flexible surface luminaire - FL100   Flexible LED area light, the colour temperature can be infinitely adjusted from 3300K to 5600K, as can the brightness. This is regulated via an external control unit, which can be controlled via the remote control or via Bluetooth via the Godox app "GodoxPhoto". The control unit can either be connected to the mains via a cable or operated via a V-Mount battery such as BP-190WS or BP-95S. The Godox FL100 LED is with its 100W and a light area of 40x60cm the ideal, and with 3.47 Kg, a light companion for the road. Thanks to the flexibility of the Godox FL panels, they can be adapted to different conditions, the easy construction of the foldable X-Mount allows a quick assembly & disassembly during video shoots or photo shootings. Due to the compact transport mass and the included carrying bag the ideal light for on-the-go shootings.   Technical data: FL100   Power output: 100WColour temperature: 3300K - 5500K (+/- 200K, <1800 LUX)TLCI: >98CRI: >96Light regulation: 10% - 100% SteplessBattery: V-MountCurrent: AC100V-240V, 2.5A (DC16.8V/4.2A)Operating temperature: -10° - 45Range RC-A5: 30mBluetooth range: 50mDimensions LxW: 40cm x 60cmWeight: 3.47 Kg   Scope of delivery:1x Godox FL100 LED1x control unit1x tripod adapter1x power supply unit and mains cable1x LED holder1x carrier bag     You can find all the technical details in the Godox FL100 instruction manual in English  

V-Mount Battery for Sony BP-95WS by PatonaThis high quality battery for Sony BP-95WS is from the Premium Series of the popular German brand Patona. It was developed to meet the needs of demanding customers. The newly created Patona Premium Series is aimed at professional photographers and specialist photo shops. Thanks to the particularly long battery life, this premium battery is also intended for any other type of professional use.The fact that an uninterruptible power supply for the equipment is reliable and always available is essential for professionals. Suitable rechargeable batteries are used wherever there is no fixed power source. Cinema cameras in particular are supplied with the appropriate energy by so-called V-mount batteries. Many models are airworthy and thus also suitable for filming abroad.We are proud to offer you this premium product and wish you a lot of pleasure when using it.For additional comfort the battery has a USB output and can be used to charge another device via USB.Technical data: capacity: 6600mAh / 14,4V / 95Whmaximum power: 9.9Amaximum current: 166WhOutput USB: 5.0V / 2.1AD-Tap output: 10V-16.8VType: Li-ionDimensions: 96x152x40mmweight: 578gSuitable for the following camera types:SonyDSR 250P, 600P, 650P, 652PHDW 800PPDW 850DSR-250P, DSR-600P, DSR-650P, DSR-652P, HDW-800P, PDW-850Replaces the following original batteries:Sony BP190w, BP-190w, BPGL65, BP-GL65, BPGL95, BP-GL95, BPGL95A, BP-GL95A, BP95w, BP-95wScope of delivery:1x V-Mount battery for Sony BP-95WS from Patona

V Mount Battery 24A 216Wh 15000mA from PatonaThis V-mount battery has a power of 216Wh. The continuous discharge rate is 24A.For further additional convenience, the battery has a D-Tap connector, a DC connector (10-16.8V, 3A max.) and a USB output built in. Thus, additional devices can be connected and used. A 4-stage LED display informs you about the charging status of the battery.For the technicians:Capacity: 15,000mAh / 14.4V / 216WhOutput USB: 5V / 2.4AD-Tap Input: 16.8V / 7A max.D-Tap output: 10-16.8V / 240W max.DC in: 16.8V 3A maxDC out: 10V-16.8V 3A max.Connection Type: V-MountType: Li-IonNumber of cells: 12Max. Charge current: 6AMax. Discharge current: 14.3A (16.8V) ~ 24A (10V)Weight: 1545grDimensions: 97x88x146 mmSuitable for the following camera types:  (List is not exhaustive)SONY Camcorder HVR-S270C PMW-EX3, PMW-EX330K, PMW-EX330L, PMW-EX330R, PMW-320, PMW-500, PMW-580K, PMW580L, PDW-680, PDW-700, PDW-850, PMW-TD300, HDW-F900R, HDW-680, HDW-800P, PMW-F55, PMW-F5Fits all cameras and LED lights with standard V-mount battery plates, compatible with Blackmagic Ursa Mini, RED EPIC, RED SCARLET cameras, Sony Video 4K Digital Cinema Cameras Broadcast DSLR, LED light, monitor, HDCAM, XDCAM and other camcorders that accept V-type battery.Replaces the following original batteries:Sony BP95W, BP-95WS, BPGL65, BP-GL65, BPGL95, BP-GL95, BP150w, BP-150w, BP-190S, BP-190WS, BP-C190S, BP-230W, BP230W, BP-280W, BP280W, BP-290W, BP290W, BP-300W, BP300W.The images are sample images, the delivered item may differ. Offered is a product of the quality brand PATONA.Attention:This battery has more than 100 Wh and is subject to dangerous goods regulations and may only be transported under special conditions.

Godox VL300 II low noise LED continuous light Flexibility is the maxim of the Godox VL 300 II The LED continuous light, which can be used indoors and outdoors, is not only interesting for hobby photographers. Professionals on the film set also appreciate its day-bright luminosity, handiness and operation via remote control. For outdoor shoots, you can use the battery-powered continuous light. Daylight conditions with the long-life LED light source Using continuous light is not only useful in video production. In photography, you have the illumination continuously under control with continuous light instead of flash light. This allows you to focus your attention on the photography itself. For continuous light photography, Godox VL 300 II offers you lighting conditions that come very close to daylight, even under studio conditions. The color temperature of the lamp is 5600 Kelvin and remains constant over time. With a CRI and TLCI value of 96, the Godox VL 300 II is one of the luminaires with highly precise color rendering. Even skin tones can be reproduced realistically with its help. In addition, the continuous light convinces with all the advantages that LED lamps basically bring. The luminaire is extremely energy-efficient: the LED continuous light requires only 320 watts for the power of the 3000 W halogen lamp that was previously standard. Its service life of up to 100,000 hours is significantly longer than that of its predecessors. Because LED lights hardly generate any heat, the ventilating cooling system can also work so quietly that you will only hear it in a whisper. Especially important for photographers and film producers: The LED light produces its light flicker-free.   Flexible lightweight with remote control   The particularly low weight of the permanent light at 3.9 kilograms is explained by the fact that the light control and battery plate are housed in a separate control box. This gives you flexibility for the ideal positioning of your lighting. Umbrellas for different light modifications can be attached directly to the device: The Bowens-style reflector mount is suitable for a wide range of models. The 5/8 inch base allows you to mount the continuous light on common lamp tripods or booms.   For larger setups, you can save yourself some long walks by controlling the continuous light via radio remote. In addition to the corresponding antenna, another one for Bluetooth reception is included. It allows you to control the light from Android or iOS devices instead of wirelessly using the Godox Photo app. If that's too much for you, you can simply use the Godox RC-A6 remote control. Another option is of course the control via the controller with LCD display. In this way you can adjust the light output in 10-watt increments or 1-percent nuances to the conditions on site.   Independent of the mains with the battery-powered continuous light   A special feature of the Godox VL300 II is that you can use it without a power supply. The LED continuous light photography battery not only has a 4 -pin XLR power cable, but can also be operated via two optional V-mount batteries. Protective cap and carrying bag are included.   All advantages at a glance:   -No disturbing flash light-Continuous control over the illumination-Light output comparable to 3000 watt halogen lamp-Natural color rendering - CRi approx. 96-Power adjustment via rotary control -Informative LCD display-Remote controllable with radio remote controls RC-A6 and Smarthphone App-Low power consumption, constant color temperature, long service life-Flicker-free light characteristic is ideal for video recording-Can also be operated via V-mount batteries without power connection, 2 batteries are required   Technical details:   Light source: LED, 100,000 h lifetime.Power: 320 WLuminous flux with reflector: 88900 Lux 1mLuminous flux without reflector: 7400 Lux 1m Color temperature: 5600 ± 200 KColor rendering index / CRi: approx. 96Television Lighting Consistency Index / TLCI: approx 96Cooling: FanAdditional features: LCD display, channel selection, umbrella holder, Bowens S-type bayonet, carrying handle, tripod mount (5/8")Remote control: built-in radio receiverPower supply: 100 - 240 V, 50 / 60 Hz, fuse 2 APower supply: 2 x V-mount battery (optional)Dimensions: 27,0 x 17 x 29 cm (L x W x H)Weight light body : 2,78 kgWeight controller: 1,2 kgBowens connector for various light shapers   Scope of delivery:   1 x Godox VL300 II 320 W continuous light1 x controller1 x power supply1 x protective cap1 x reflector1 x power cable 1 x connection cable1 x remote control 1 x carrying bag         You can find all the technical details in the Godox VL300II instruction manual in English    

Godox FL150S-K2 flexible LED light set The Godox FL150S flexible LED light set includes two flexible LED lights, each with a controller, an X-mount, a tripod mount and a softbox with honeycomb. Also included is a wireless remote control and so that the whole thing can be easily transported and stored, a carrying case. The FL150S is a flexible LED light with dimensions of 60 x 60 cm, the light can be rolled up for storage and transportation. The flexibility of the light is useful for imaginative image creation. By using the X-mount bracket, the light can be used like a conventional area light. All technical information about this led light can be found in the manual, which is available at the very bottom of available downloads. The LED light has a variable color range from 3300 to 5600 Kelvin, which allows it to meet any ambient light challenge, whether it's matching existing light or shooting creatively, it doesn't matter. The panel has high CRI/TLCI values, which stands for high accuracy in color reproduction. The light intensity is also variable, from 10% to 100%. Both functions can be fine-tuned remotely via the unit's control panel as well as the included wireless remote control. The FL150S is suitable for worldwide use thanks to a universal 100- to 240-volt power supply. It can also be powered by a separately available V-mount battery if AC power is unavailable. The advantages of the flexible LED light at a glance:   Flexible LED light for universal placement Simple holder for mounting on a lamp tripod Can be controlled directly on the unit or with remote control Color temperature adjustable between 3300 and 5600 Kelvin The light is continuously dimmable between 10 and 100 Scope of delivery: 2 x flexible LED light FL150S2 x control unit2 x adapters2 x power cable2 x DC connection cable2 x X-mount bracket2 x light stand mount2 x Velcro fastener2 x softbox with grid1 x remote control1 x carrying bag Not included in the scope of delivery Indispensable light stands (not included)

Godox FL100-K2 flexible LED light set The Godox FL100 flexible LED light kit includes two flexible LED lights, each with a controller, an X-mount, a tripod mount and a softbox with honeycomb. Also included is a wireless remote control and so that the whole thing can be easily transported and stored, a carrying case. The FL100 is a flexible LED light with dimensions of 40 x 60 cm, the light can be rolled up for storage and transportation. The flexibility of the light is useful for imaginative image creation. By using the X-Mount bracket, the light can be used like a conventional area light. The LED fixture has a variable color range of 3300 to 5600 Kelvin, which allows it to meet any ambient light challenge, whether it's matching existing light or shooting creatively, it doesn't matter. The panel has high CRI/TLCI values, which stands for high accuracy in color reproduction. The light intensity is also variable, from 10% to 100%. Both functions can be fine-tuned remotely, both via the control of the device and via the included wireless remote control. The FL100 is suitable for worldwide use thanks to a universal 100- to 240-volt power supply. It can also be powered by a separately available V-mount battery pack in the event that AC power is unavailable. The advantages of the flexible LED light at a glance: Flexible LED light for universal placementSimple holder for mounting on a lamp tripodCan be controlled directly on the unit or with remote controlColor temperature adjustable between 3300 and 5600 KelvinThe luminaire is continuously dimmable between 10 and 100 Note: The set does not include lamp stands. We recommend the L-2400A lamp stand from Jinbei for this set. Scope of delivery: 2 x flexible LED light FL1002 x control unit2 x adapters2 x power cable2 x DC connection cable2 x X-mount bracket2 x light stand mount2 x Velcro fastener2 x softbox with grid1 x remote control1 x carrying bag

Godox Flexible Surface Light - FL150R Flexible LED area light, the colour temperature can be infinitely adjusted from 3300K to 5600K, as can the brightness. This is regulated via an external control unit, which can be controlled via the remote control or via Bluetooth via the Godox app "GodoxPhoto". The control unit can either be connected to the mains via a cable or operated via a V-Mount battery such as BP-190WS or BP-95S. The Godox FL150R LED is with its 150W and a light area of 30x0cm the ideal, and with 4.4 Kg, a light companion on the go. Thanks to the flexibility of the Godox FL panels, they can be adapted to different conditions, the easy construction of the foldable X-Mount allows a quick assembly & disassembly during video shoots or photo shootings. Due to the compact transport mass and the included carrying bag the ideal light for on-the-go shootings. Technical data: FL150R Power output: 150WColour temperature: 3300K - 5500K (+/- 200K, <1800 LUX)TLCI: >98CRI: >96Light regulation: 10% - 100% SteplessPerformance: <4300Lux (1m in dark room)Battery: V-MountCurrent: AC100V-240V, 2.5A (DC16.8V/4.2A)Operating temperature: -10° - 45Range RC-A5: 30mBluetooth range: 50mDimensions LxW: 30cm x 120cmWeight: 4.4 Kg Scope of delivery:1x Godox FL150R LED1x control unit1x tripod adapter1x power supply unit and mains cable1x LED holder1x carrier bag   You can find all the technical details in the Godox FL150R instruction manual in English