Lens Cap for Ricoh GR III and GR II

Glass screen protector for the Ricoh GR IIIx or GR III This custom-fit protective film reliably protects the display of the Ricoh GR IIIx and GR III against dirt, fingerprints, splash water and dust. It also protects the camera display from scratches. The high degree of hardness of the screen protector reliably protects the display of the Ricoh GR IIIx and GR III The screen protector is made of optical glass and consists of a total of six layers, which are made up of the actual protective glass, an anti-reflective coating, a hard coating and a shatter protection layer. The protective glass is only approx. 0.3 mm thick. The anti-reflective coating minimizes annoying reflections. This structure makes the glass used particularly clear. This ensures a light transmission of 95% and an optimum view of the camera display of the Ricoh GR IIIx and GR III. The display protection has a high degree of hardness. This minimizes the risk of damage. The anti-shatter layer makes the screen protector shatterproof, so that it does not shatter in the event of damage and sticks to the camera display in one piece. Adhesion through adhesion, no glue - touchscreens remain operable The screen protector for the Ricoh GR IIIx and GR III is not glued on, but adheres by adhesion. To attach the screen protector, simply place it on the display and press lightly. It then adheres to the display and the air bubbles disappear. And because it is attached without adhesive, the screen protector can be removed 100% residue-free. Thanks to the adhesive, the screen protector adheres to the entire surface of the display and not just to the edges. The touchscreen of the Ricoh GR IIIx and GR III therefore remains operable. Attaching the screen protector Before you attach the screen protector to your Ricoh GR IIIx and GR III, you should thoroughly clean the display to ensure optimum adhesion and to prevent dust from getting between the display and the screen protector. Don't worry, the cleaning material is already included in the scope of delivery: a microfiber cloth, a damp cleaning cloth and an adhesive surface to pick up dust particles. Perfect fit for the Ricoh GR IIIx and GR III display The protective film is cut to fit the display perfectly and does not cover any part of the display, all information is visible even after the screen protector has been fitted. The display can still be folded in, but it may no longer snap into place as it would without the screen protector; unfortunately, this varies from camera to camera and cannot be said across the board. For technicians: Material: optical glass Light transmittance: 95 Degree of hardness: 9H Thickness: approx. 0.3 mm Scope of delivery 1 x display protection glass for the Ricoh GR IIIx and GR III 1 x cleaning cloth 1 x damp cleaning cloth 1 x vacuum cleaner

Lens decoration ring for Ricoh GR IIIx like GN-2 in red Add a touch of style to your Ricoh GR IIIx or Ricoh GR IIIx HDF digital camera with the red RN-GR3X ring. This ring protects the outside of the lens barrel and, with its elegant red surface, perfectly matches the camera's black body. The lens ring is intended as a replacement for the lost original Ricoh GN-2 ring and is also available in other colors for the brave. The features of the lens decoration ring Weight 0.02 g Dimensions 85.1 × 85.1 × 15 mm Color: Red Installing the decoration ring Step-by-step instructions Preparation: Turn off your camera. Removing the original ring: Carefully unscrew the existing ring. Attaching the JJC RN-GR3X: Place the new ring on and tighten it clockwise. Notes Do not overtighten the ring to avoid damage. You do not need any tools – hand-tightness is sufficient. Compatibility The JJC RN-GR3X is designed exclusively for the Ricoh GR IIIx and Ricoh GR IIIx HDF. For other models, such as the GR III, there are separate rings. Contents: 1 x lens decoration ring for Ricoh GR IIIx like GN-2 in red

Lens decoration ring for Ricoh GR IIIx like GN-2 in black Add a touch of style to your Ricoh GR IIIx or Ricoh GR IIIx HDF digital camera with the black RN-GR3X ring. This ring protects the outside of the lens barrel and, with its elegant black finish, perfectly matches the camera's black body. The lens ring is designed as a replacement for the lost original Ricoh GN-2 ring and is also available in other colors for the brave. The features of the lens decoration ring Weight 0.02 gr Dimensions 85.1 × 85.1 × 15 mm Color: Black Installation of the decoration ring Step-by-step instructions Preparation: Turn off your camera. Removal of the original ring: Carefully unscrew the existing ring. Attaching the JJC RN-GR3X: Place the new ring on and tighten it clockwise. Notes To avoid damage, do not overtighten the ring. You do not need any tools – hand-tightness is sufficient. Compatibility The JJC RN-GR3X is designed exclusively for the Ricoh GR IIIx and Ricoh GR IIIx HDF. For other models, such as the GR III, there are separate rings. Contents: 1 x lens decoration ring for Ricoh GR IIIx like GN-2 in black

Godox iT20 clip-on flash for Ricoh GR III & GR IIIx – Black The Godox iT20 clip-on flash for Ricoh GR III and GR IIIx in black is a compact, powerful mini flash designed specifically for the popular Ricoh premium compact cameras. It provides significantly better illumination in low light and gives you more creative control over your photos – ideal for street, travel and everyday photography. The Godox iT20 has been perfectly matched to the Ricoh GR III and GR IIIx. Thanks to its minimalist design, it fits the camera perfectly, both visually and technically, without making it unnecessarily bulky. Despite its compact design, the flash delivers impressive light output and ensures natural colors and clear contrasts. Its ease of use makes it attractive for both beginners and experienced photographers. Multiple manual power levels allow you to precisely adjust the flash to your shooting situation. The flash is controlled directly via the camera's hot shoe and is ready for immediate use. Special features and advantages Extremely compact and lightweight – perfect for on the go Specially designed for Ricoh GR III and GR IIIx Manual power control for creative freedom Quick to use without complicated settings High-quality workmanship in a discreet black design Compatibility Ricoh GR III Ricoh GR IIIx Technical details Flash modes: Manual Power levels: Multi-level adjustable Mounting: Hot shoe Color: Black Weight: approx. 45 g  Dimensions: compact mini design Scope of delivery Godox iT20 clip-on flash Protective cap

Lens hood for Ricoh GR3XThe JJC LH-GR3X lens hood is designed specifically for the Ricoh GR IIIX camera. It prevents unwanted stray light from entering the lens by extending and darkening the end of the lens, and is perfectly matched to the specific focal length of the lens. The inside of the lens hood has a non-glare matte finish to prevent or limit stray light. No vignetting occurs when the lens hood is attached. The extended lens end provides additional protection against accidental shocks. In addition, the lens hood maintains the aesthetics of the lens and camera system. The main part of the lens hood is made of high quality aluminum alloy, which is sturdy and durable; the bayonet mount is made of synthetic resin, which will not damage your lenses. The lens hood comes with a protective cap that prevents dust from entering and protects against accidental shocks. The features of this lens hood at a glance:Specially designed for use with the Ricoh GR IIIX camera Prevents unwanted stray light from entering the lens Glare-free, matte surface prevents or reduces lens reflections No vignetting when lens hood is attached Protects the lens from accidental impacts Made of high-quality aluminum alloy, robust and durableSuitable for the following camera:Ricoh GR IIIXScope of delivery1 x Lens hood LH-GR3X from JJC1 x instruction manual

Lens decoration ring for Ricoh GR IIIx like GN-2 in green Add a green touch to your Ricoh GR IIIx or Ricoh GR IIIx HDF digital camera with the RN-GR3X green ring. This ring protects the outside of the lens barrel and, with its elegant green surface, perfectly matches the camera's black body. The lens ring is intended as a replacement for the lost original Ricoh GN-2 ring and is also available in other colors for the brave. The features of the lens decoration ring Weight 0.02 g Dimensions 85.1 × 85.1 × 15 mm Color: Green Installation of the decoration ring Step-by-step instructions Preparation: Turn off your camera. Removal of the original ring: Carefully unscrew the existing ring. Attaching the JJC RN-GR3X: Place the new ring on and screw it on clockwise. Notes To avoid damage, do not overtighten the ring. You do not need any tools – hand-tightness is sufficient. Compatibility The JJC RN-GR3X is designed exclusively for the Ricoh GR IIIx and Ricoh GR IIIx HDF. For other models, such as the GR III, there are separate rings. Contents: 1 x lens decoration ring for Ricoh GR IIIx like GN-2 in green

Lens decoration ring for Ricoh GR IIIx like GN-2 in blue Add a touch of blue to your Ricoh GR IIIx or Ricoh GR IIIx HDF digital camera with the RN-GR3X blue ring. This ring protects the outside of the lens barrel and, with its elegant blue finish, perfectly matches the black body of the camera. The lens ring is intended as a replacement for the lost original Ricoh GN-2 ring and is also available in other colors for the brave. The features of the lens decoration ring Weight 0.02 g Dimensions 85.1 × 85.1 × 15 mm Color: Blue Installation of the decoration ring Step-by-step instructions Preparation: Turn off your camera. Removing the original ring: Carefully unscrew the existing ring. Attaching the JJC RN-GR3X: Place the new ring on and tighten it clockwise. Notes Do not overtighten the ring to avoid damage. You do not need any tools – hand-tightness is sufficient. Compatibility The JJC RN-GR3X is designed exclusively for the Ricoh GR IIIx and Ricoh GR IIIx HDF. For other models, such as the GR III, there are separate rings. Contents: 1 x lens decoration ring for Ricoh GR IIIx like GN-2 in blue

Lens hood for Ricoh GR3The JJC LH-GR3 lens hood is designed specifically for the Ricoh GR III camera. It prevents unwanted stray light from entering the lens by extending and darkening the end of the lens, and is perfectly matched to the specific focal length of the lens. The inside of the lens hood has a non-glare matte finish to prevent or limit stray light. No vignetting occurs when the lens hood is attached. The extended lens end provides additional protection against accidental shocks. In addition, the lens hood maintains the aesthetics of the lens and camera system. The main part of the lens hood is made of high quality aluminum alloy, which is sturdy and durable; the bayonet mount is made of synthetic resin, which will not damage your lenses. The lens hood comes with a protective cap that prevents dust from entering and protects against accidental shocks. The features of this lens hood at a glance:Specially designed for use with the Ricoh GR III cameraPrevents unwanted stray light from entering the lensGlare-free, matte surface prevents or reduces lens reflectionsNo vignetting when lens hood is attachedProtects the lens from accidental impactsMade of high-quality aluminum alloy, robust and durableSuitable for the following camera:Ricoh GR IIIScope of delivery1 x Lens hood LH-GR3 from JJC1 x instruction manual