Godox it20 clip-on flash Ricoh GR3 and GR3X black

Glass screen protector for the Ricoh GR IIIx or GR III This custom-fit protective film reliably protects the display of the Ricoh GR IIIx and GR III against dirt, fingerprints, splash water and dust. It also protects the camera display from scratches. The high degree of hardness of the screen protector reliably protects the display of the Ricoh GR IIIx and GR III The screen protector is made of optical glass and consists of a total of six layers, which are made up of the actual protective glass, an anti-reflective coating, a hard coating and a shatter protection layer. The protective glass is only approx. 0.3 mm thick. The anti-reflective coating minimizes annoying reflections. This structure makes the glass used particularly clear. This ensures a light transmission of 95% and an optimum view of the camera display of the Ricoh GR IIIx and GR III. The display protection has a high degree of hardness. This minimizes the risk of damage. The anti-shatter layer makes the screen protector shatterproof, so that it does not shatter in the event of damage and sticks to the camera display in one piece. Adhesion through adhesion, no glue - touchscreens remain operable The screen protector for the Ricoh GR IIIx and GR III is not glued on, but adheres by adhesion. To attach the screen protector, simply place it on the display and press lightly. It then adheres to the display and the air bubbles disappear. And because it is attached without adhesive, the screen protector can be removed 100% residue-free. Thanks to the adhesive, the screen protector adheres to the entire surface of the display and not just to the edges. The touchscreen of the Ricoh GR IIIx and GR III therefore remains operable. Attaching the screen protector Before you attach the screen protector to your Ricoh GR IIIx and GR III, you should thoroughly clean the display to ensure optimum adhesion and to prevent dust from getting between the display and the screen protector. Don't worry, the cleaning material is already included in the scope of delivery: a microfiber cloth, a damp cleaning cloth and an adhesive surface to pick up dust particles. Perfect fit for the Ricoh GR IIIx and GR III display The protective film is cut to fit the display perfectly and does not cover any part of the display, all information is visible even after the screen protector has been fitted. The display can still be folded in, but it may no longer snap into place as it would without the screen protector; unfortunately, this varies from camera to camera and cannot be said across the board. For technicians: Material: optical glass Light transmittance: 95 Degree of hardness: 9H Thickness: approx. 0.3 mm Scope of delivery 1 x display protection glass for the Ricoh GR IIIx and GR III 1 x cleaning cloth 1 x damp cleaning cloth 1 x vacuum cleaner

Lens decoration ring for Ricoh GR III like GN-1 in black Add the black RN-GR3 ring to your Ricoh GR III digital camera. This ring protects the outside of the lens barrel and, with its elegant black surface, perfectly matches the black body of the camera. The lens ring is intended as a replacement for the lost original Ricoh GN-1 ring. Lens decoration ring specifications Weight 0.03 gr Dimensions 56 × 4.3 mm Color: Black Decoration ring installation Step-by-step guide Preparation: Turn off your camera. Removing the original ring: Carefully unscrew the existing ring. Attaching the JJC RN-GR3: Place the new ring on and turn it clockwise to tighten. Notes Do not overtighten the ring to avoid damage.You do not need any tools – hand-tightness is perfectly sufficient. Compatibility The JJC RN-GR3 is designed exclusively for the Ricoh GR III. For other models, such as the GR IIIx, there are separate rings. Contents: 1 x lens decoration ring for Ricoh GR III like GN-1 in black

Lens decoration ring for Ricoh GR IIIx like GN-2 in blue Add a touch of blue to your Ricoh GR IIIx or Ricoh GR IIIx HDF digital camera with the RN-GR3X blue ring. This ring protects the outside of the lens barrel and, with its elegant blue finish, perfectly matches the black body of the camera. The lens ring is intended as a replacement for the lost original Ricoh GN-2 ring and is also available in other colors for the brave. The features of the lens decoration ring Weight 0.02 g Dimensions 85.1 × 85.1 × 15 mm Color: Blue Installation of the decoration ring Step-by-step instructions Preparation: Turn off your camera. Removing the original ring: Carefully unscrew the existing ring. Attaching the JJC RN-GR3X: Place the new ring on and tighten it clockwise. Notes Do not overtighten the ring to avoid damage. You do not need any tools – hand-tightness is sufficient. Compatibility The JJC RN-GR3X is designed exclusively for the Ricoh GR IIIx and Ricoh GR IIIx HDF. For other models, such as the GR III, there are separate rings. Contents: 1 x lens decoration ring for Ricoh GR IIIx like GN-2 in blue

Lens hood for Ricoh GR3XThe JJC LH-GR3X lens hood is designed specifically for the Ricoh GR IIIX camera. It prevents unwanted stray light from entering the lens by extending and darkening the end of the lens, and is perfectly matched to the specific focal length of the lens. The inside of the lens hood has a non-glare matte finish to prevent or limit stray light. No vignetting occurs when the lens hood is attached. The extended lens end provides additional protection against accidental shocks. In addition, the lens hood maintains the aesthetics of the lens and camera system. The main part of the lens hood is made of high quality aluminum alloy, which is sturdy and durable; the bayonet mount is made of synthetic resin, which will not damage your lenses. The lens hood comes with a protective cap that prevents dust from entering and protects against accidental shocks. The features of this lens hood at a glance:Specially designed for use with the Ricoh GR IIIX camera Prevents unwanted stray light from entering the lens Glare-free, matte surface prevents or reduces lens reflections No vignetting when lens hood is attached Protects the lens from accidental impacts Made of high-quality aluminum alloy, robust and durableSuitable for the following camera:Ricoh GR IIIXScope of delivery1 x Lens hood LH-GR3X from JJC1 x instruction manual

Lens decoration ring for Ricoh GR IIIx like GN-2 in various colors In the world of photography, it is often the small details that make all the difference. The JJC RN-GR3X lens decoration ring is such a detail, which not only enhances the aesthetics of your Ricoh GR IIIx camera, but also offers practical advantages.

Thumb rest to Ricoh GR IIIx and GR III in black.Thumbs Up is an accessory, a thumb rest that allows you to hold your Ricoh GR IIIx and GR III with improved balance, comfort and security. You won't believe how big the difference is. Your photos will be sharper because of the better grip in your hand. Thumbs Up users report being able to work with 1-2 stops slower shutter speeds when shooting hands-free.Thumbs Up are available from us at the moment for various cameras The advantages at a glance:Specially designed for Ricoh GR IIIx and GR IIIProvides a secure grip while shootingIncreases comfort when holding the cameraSlips into the hot shoe of the cameraThe design matches the camera bodyMade of anodized aluminum alloy, with microfiber leatherDoes not interfere with controlsSilicone pad for better protection of your cameraScope of delivery:1x TA-GR3 thumb rest in black to Ricoh GR IIIx and GR III.

Lens decoration ring for Ricoh GR IIIx like GN-2 in red Add a touch of style to your Ricoh GR IIIx or Ricoh GR IIIx HDF digital camera with the red RN-GR3X ring. This ring protects the outside of the lens barrel and, with its elegant red surface, perfectly matches the camera's black body. The lens ring is intended as a replacement for the lost original Ricoh GN-2 ring and is also available in other colors for the brave. The features of the lens decoration ring Weight 0.02 g Dimensions 85.1 × 85.1 × 15 mm Color: Red Installing the decoration ring Step-by-step instructions Preparation: Turn off your camera. Removing the original ring: Carefully unscrew the existing ring. Attaching the JJC RN-GR3X: Place the new ring on and tighten it clockwise. Notes Do not overtighten the ring to avoid damage. You do not need any tools – hand-tightness is sufficient. Compatibility The JJC RN-GR3X is designed exclusively for the Ricoh GR IIIx and Ricoh GR IIIx HDF. For other models, such as the GR III, there are separate rings. Contents: 1 x lens decoration ring for Ricoh GR IIIx like GN-2 in red

JJC lens cap LC-GR3 The lens cap is specially designed for Ricoh GR IIIx, GR III and GR II cameras. This lens cap can protect the front of your lens when it is not in use. It can effectively protect your valuable lens from scratches, moisture, dust and fingerprints. The high quality aluminium alloy is durable and lightweight, and this metal construction fits your lens perfectly. The soft EVA interior can protect your lens from unwanted scratches. The advantages at a glance Specially designed for Ricoh GR IIIx, GR III and GR II Protects your lens when not in use Made from high quality aluminium alloy With soft EVA inside Fits perfectly with your lens Durable and lightweight Scope of delivery 1 x lens cap LC-GR3 NotePlease put this lens cap on your lens and wait 12 hours before first use.

Lens decoration ring for Ricoh GR IIIx like GN-2 in black Add a touch of style to your Ricoh GR IIIx or Ricoh GR IIIx HDF digital camera with the black RN-GR3X ring. This ring protects the outside of the lens barrel and, with its elegant black finish, perfectly matches the camera's black body. The lens ring is designed as a replacement for the lost original Ricoh GN-2 ring and is also available in other colors for the brave. The features of the lens decoration ring Weight 0.02 gr Dimensions 85.1 × 85.1 × 15 mm Color: Black Installation of the decoration ring Step-by-step instructions Preparation: Turn off your camera. Removal of the original ring: Carefully unscrew the existing ring. Attaching the JJC RN-GR3X: Place the new ring on and tighten it clockwise. Notes To avoid damage, do not overtighten the ring. You do not need any tools – hand-tightness is sufficient. Compatibility The JJC RN-GR3X is designed exclusively for the Ricoh GR IIIx and Ricoh GR IIIx HDF. For other models, such as the GR III, there are separate rings. Contents: 1 x lens decoration ring for Ricoh GR IIIx like GN-2 in black

Lens hood for Ricoh GR3The JJC LH-GR3 lens hood is designed specifically for the Ricoh GR III camera. It prevents unwanted stray light from entering the lens by extending and darkening the end of the lens, and is perfectly matched to the specific focal length of the lens. The inside of the lens hood has a non-glare matte finish to prevent or limit stray light. No vignetting occurs when the lens hood is attached. The extended lens end provides additional protection against accidental shocks. In addition, the lens hood maintains the aesthetics of the lens and camera system. The main part of the lens hood is made of high quality aluminum alloy, which is sturdy and durable; the bayonet mount is made of synthetic resin, which will not damage your lenses. The lens hood comes with a protective cap that prevents dust from entering and protects against accidental shocks. The features of this lens hood at a glance:Specially designed for use with the Ricoh GR III cameraPrevents unwanted stray light from entering the lensGlare-free, matte surface prevents or reduces lens reflectionsNo vignetting when lens hood is attachedProtects the lens from accidental impactsMade of high-quality aluminum alloy, robust and durableSuitable for the following camera:Ricoh GR IIIScope of delivery1 x Lens hood LH-GR3 from JJC1 x instruction manual

Lens decoration ring for Ricoh GR IIIx like GN-2 in green Add a green touch to your Ricoh GR IIIx or Ricoh GR IIIx HDF digital camera with the RN-GR3X green ring. This ring protects the outside of the lens barrel and, with its elegant green surface, perfectly matches the camera's black body. The lens ring is intended as a replacement for the lost original Ricoh GN-2 ring and is also available in other colors for the brave. The features of the lens decoration ring Weight 0.02 g Dimensions 85.1 × 85.1 × 15 mm Color: Green Installation of the decoration ring Step-by-step instructions Preparation: Turn off your camera. Removal of the original ring: Carefully unscrew the existing ring. Attaching the JJC RN-GR3X: Place the new ring on and screw it on clockwise. Notes To avoid damage, do not overtighten the ring. You do not need any tools – hand-tightness is sufficient. Compatibility The JJC RN-GR3X is designed exclusively for the Ricoh GR IIIx and Ricoh GR IIIx HDF. For other models, such as the GR III, there are separate rings. Contents: 1 x lens decoration ring for Ricoh GR IIIx like GN-2 in green