SmallRig Arri Locating Handle 2165

SmallRig Cage Kit for Canon EOS C70 The SmallRig Camera Cage with Handle for Canon EOS C70 is designed to protect the camera and provide attachment points for accessories for a comfortable shooting experience. It includes: a top plate, a side plate, a base plate, a detachable extended base plate, a top NATO grip, a cable clamp, etc., and the convenient top NATO grip facilitates camera movement and stabilizes shooting; the top plate, base plate and side plate can be assembled into a half cage that supports the original grip unit and microphone holder unit. The base of the half cage consists of a base plate and a removable extended base plate. It can be mounted directly on DJI RS 2 / RSC 2 stabilizers and Acra-Swiss tripod by simply removing the extended base plate. The kit also comes with an HDMI cable clamp that prevents accidental signal interruption and ensures stable data transmission. The 1/4"-20 threaded holes, 3/8"-16 threaded holes, cold light mounts, ARRI 3/8"-16 mounting holes, NATO rails.Matching products:side handle 3260/2093/2427upper handle 2165/1638Magic Arm 2115/2071Monitorhalterung 3601/2903/2905Base plate with 15 mm double rod clamp 1674Single rod clamp 3276 In addition, an Allen wrench is included for easy disassembly and assembly.  Note:Installation order: base plate, side plate, camera, top plate.Please remove the removable extended base plate before attaching the DJI RS 2/RSC 2. Advantages at a glance: Special handheld kit for Canon EOS C70 for stable and comfortable shooting.1/4"-20 threaded holes, 3/8"-16 threaded holes, cold light mounts, ARRI 3/8"-16 mounting holes, NATO rails, etc. for multi-scene shooting.The top plate is compatible with the original handle and microphone mount.Supports DJI RS 2 / RSC 2 stabilizers after removing the removable extended base plate.HDMI cable clamp provides stable data transmission.Retains full access to original camera grip and buttons.Fits Canon EOS C70 perfectly by extracting its elements. For technicians: Product dimensions: 90.5 x 123 x 12.7mm.Net weight: 350g±5gMaterial: aluminum alloy, stainless steel Suitable for: Canon EOS C70 Scope of delivery: 1 x top plate1 x side plate1 x base plate1 x Removable extended base plate6 x 1/4''-20 screw1 x Handle 24391 x Cable clamp 16391 x User manual  

SmallRig Cage for Sony FX30 or FX3   The SmallRig Camera Cage 4183 is a form-fitting cage suitable for Sony FX30 or Sony FX3, with this cage you protect your camera on one side and have the possibility to attach accessories via various mounting points. On the top side is a so-called NATO rail mounted, which allows you to easily clamp accessories. A special HDMI cable clamp protects the interfaces and ensures stable signal transmission. For attaching the accessories, the camera cage has various 1/4"-20 threaded holes. A magnetic key is also included for easy camera installation and removal. Notice: 1. before mounting the original XLR grip, you must disassemble the upper NATO rail. 2. since the upper 1/4"-20 holes have a hole center distance of 27mm, they are not compatible with accessories with a hole center distance of 18mm. Technical features: Product dimensions: 159 x 101.2 x 66.2mm Product weight: 195±5g Material(s): Aluminum alloy, stainless steel Suitable for the following cameras: Sony FX30 Sony FX3 Scope of delivery: 1 x Cage1 x NATO rail1 x HDMI cable clamp2 x 1/4"-20 screw

SmallRig Cage for Sony Alpha 7 IV Alpha 7S III Alpha 1 SmallRig Full Cage for Sony Alpha 7 IV/Alpha 7S III/Alpha 1 3667 is designed to provide accessory mounts and protect the camera. Two locking side plates and a 1/4"-20 screw on the bottom keep the camera locked in place and prevent flexing. Built-in protective spacers all around prevent the camera from being scratched. The cage allows access to the interfaces, dials, buttons and battery compartment covers. A spindle wrench is located on the battery compartment that conforms to the camera's curve, leaving room for a pinky finger to grip comfortably. 1/4"-20 threaded holes, ARRI 3/8"-16 mounting holes and cooling shoes support the 2165 top grip, 2093 side grip, 2903 monitor mount, microphones, LED lights, monitors, etc. Arca quick release plate on the bottom is compatible with DJI RS 2/RSC 2 and DJI RS 2/RSC 2 stabilizer quick release plate (pad) for stabilizer shooting. The optional HDMI Cable Clamp 3000 works with the Alpha 7 IV/Alpha 7S III to protect interfaces and ensure stable signal transmission while filming. Holes on the sides and bottom of the cage allow accessories such as the PAC2456 hand strap and PSC2428 shoulder strap to be attached. In addition, the cage has a built-in magnetic key that facilitates disassembly and assembly. Notice: The HDMI cable clamp 3000 is not compatible with Alpha 1.To use the side lock, please remove the split ring on the left side of the camera first. Advantages at a glance: One-piece full cage protects the cameraThe spindle key on the battery compartment adjusts to the camera curve and improves grip.Multiple mounting points: 1/4"-20 threaded holes, ARRI 3/8"-16 mounting holes, flash shoes and NATO rails for handles, microphones, LED lights, monitors, etc.Two-point locking: Fixes the camera via 1/4"-20 screw on the bottom and the shoulder strap hole on the left side (with 2 sliders, suitable for different models).Arca quick release plate on the bottom for fast switching between tripod, stabilizer (DJI RS 2/RSC 2) and handheld shooting. For technicians: Product dimensions: 146 x 107.6 x 64.5 mmNet weight: 190g±5gMaterial: aluminum alloy, stainless steel, silicone Suitable for the following cameras: Sony Alpha 7 IV Sony Alpha 7S III Sony Alpha 1 Sony Alpha 7R IV Sony Alpha 7R V Scope of delivery: 1 x cage2 x lockable side plate  

SmallRig Battery Grip compatible Cage for BMPCC 6K PRO The SmallRig Camera Cage for BMPCC 6K Pro is specially designed for the Blackmagic Pocket Cinema Camera 6K Pro with mounted battery grip. The two-screw mounting prevents the camera from twisting and the rubber bumpers on the bottom prevent scratches on the housing. The camera cage features an ARRI 3/8" -16 mount for the ARRI top handle 2165 and a cold shoe for the Samsung T5 ssD mount 3272. The top of the cage has holes on each side for a shoulder strap or other accessories. The left side has a NATO rail, 1/4"-20 threaded holes for mounting the HSN2270 side handle, and a dedicated HDMI and USB-C cable clamp 3271. Holes in the upper right corner and lower left corner allow access to the 3276 clamp for the focus rod. The bottom is compatible with the double rod clamp 1943, which makes the distance between the double rods and the center of the lens 85 mm and allows the installation of the lens mount. In addition, there is a built-in screwdriver on the bottom of the cage for your installation. The form-fit cage does not block any ports, card slots, heat sinks or battery doors. The right side of the cage is ergonomically designed to fit comfortably in your hand. The advantages at a glance: Dedicated battery grip compatible camera cage for BMPCC 6K Pro, can also be disassembled to half camera cage.Multiple accessory mounting points on the top and side, provide multiple mounting solutions.Provides mounting solutions for ssD holder, HDMI&USB-C cable clamp and rod clamp.Firmly locks the camera via threaded holes at the top and bottom.Ergonomic design for better grip. For technicians: Product dimensions: 194 x 99 x 189mm.Net weight: 355g±5gMaterial: Aluminum alloy Fits: Blackmagic Design Pocket Cinema Camera 6K Pro Scope of delivery: 1 x Cage1 x 1/4"-20 screw1 x Allen key The pictures are only sample pictures, shipped item may differ from the picture.

SmallRig Cage for Fuji GFX100S and GFX50S II The camera cage number 3715 from SmallRig is made specifically for the Fujifilm GFX100S and GFX50S II mirrorless medium format camera. It features Arca-type dovetails on both axes to mount the bracket vertically or horizontally at a compatible angle. The aluminum angle side plate is machined to access the camera's ports, and it can slide forward to allow access to the battery compartment. In addition, the camera cage has several 1/4"-20 and 3/8"-16 sockets, as well as several ARRI threaded holes for mounting various accessories. Center markings are located in the middle of each axis of the camera cage to center the camera on a mounted head, and the included hex wrench is located in the base plate when not in use. Product dimensions: 184x115x71 mmNet weight: 213 gMaterial(s): Aluminum alloy Fits the following cameras: Fujifilm GFX100S and GFX50S II Scope of delivery 1 x Camera cage 3715

SmallRig Cage Set for Sony Alpha 7 IV Alpha 7S III Alpha 7R V   SmallRig Full Cage Set for Sony Alpha 7 IV/Alpha 7S III/Alpha 1 3667 is designed to provide accessory mounts and protect the camera. Two locking side plates and a 1/4"-20 screw on the bottom keep the camera locked in place and prevent flexing. Built-in protective spacers all around prevent the camera from being scratched. The cage allows access to the interfaces, dials, buttons and battery compartment covers. A spindle wrench is located on the battery compartment that conforms to the camera's curve, leaving room for a pinky finger to grip comfortably. 1/4"-20 threaded holes, ARRI 3/8"-16 mounting holes and cooling shoes support the 2165 top grip, 2093 side grip, 2903 monitor mount, microphones, LED lights, monitors, etc. Arca quick release plate on the bottom is compatible with DJI RS 2/RSC 2 and DJI RS 2/RSC 2 stabilizer quick release plate (pad) for stabilizer shooting. The optional HDMI Cable Clamp 3000 works with the Alpha 7 IV/Alpha 7S III to protect interfaces and ensure stable signal transmission while filming. Holes on the sides and bottom of the cage allow accessories such as the PAC2456 hand strap and PSC2428 shoulder strap to be attached. In addition, the cage has a built-in magnetic key that facilitates disassembly and assembly. Notice:The HDMI cable clamp 3000 is not compatible with Alpha 1.To use the side lock, please remove the split ring on the left side of the camera first. Advantages at a glance: One-piece full cage protects the cameraThe spindle key on the battery compartment adjusts to the camera curve and improves grip.Multiple mounting points: 1/4"-20 threaded holes, ARRI 3/8"-16 mounting holes, flash shoes and NATO rails for handles, microphones, LED lights, monitors, etc.Two-point locking: Fixes the camera via 1/4"-20 screw on the bottom and the shoulder strap hole on the left side (with 2 sliders, suitable for different models).Arca quick release plate on the bottom for fast switching between tripod, stabilizer (DJI RS 2/RSC 2) and handheld shooting. For technicians: Product dimensions: 146 x 107.6 x 64.5 mmNet weight: 190g±5gMaterial: aluminum alloy, stainless steel, silicone Suitable for the following cameras: Sony Alpha7 IVSony Alpha7S IIISony Alpha 7R V Scope of delivery: 1 x cage2 x lockable side plate1 x HDMI cable clamp 30001 x ARRI recording handle 2165