SmallRig Cage for Sony FX30 or FX3 4183

SmallRig Swivel and Tilt Adjustable Monitor Mount with ARRI-Style Mount SmallRig Swivel and Tilt Adjustable Monitor Mount with ARRI-Style Mount is designed to hold your monitor onto the camera cage or other mounting system via ARRI 3/8”-16 style anti-twist mount. It features 1/4”-20 screw on the top for monitor, light, or microphone. The holder enables to swivel 360° sideways and tilts 170° with a free stop in any position. The tightness of each axis is adjustable via the Allen wrench. The robust mount is CNC-Machined Aluminum and can support 5” and 7” monitor up to 1.5kg. The swivel and tilt mount has protective rubber padding on top and includes an Allen wrench for tightening the mounts for further security. Besides, the bottom comes with a 1/4”-20 threaded hole for more DIY options. Designer: Bear , Tracy Joy Note:Please do use the Allen Wrench to re-tighten the thumbscrew for further security. Key Features:1. Supports 5” and 7” Onboard Monitor up to 1.5kg.2. Swivels 360° and Tilts 170°. 3. Tightness Adjustable on Each Axis.4. Features Slots on Thumbscrews for Tightening the Mount.5. Secures to Cage/Handle via ARRI-Style Anti-Twist Mount. Compatibility:SmallHD Focus SeriesSmallHD Focus OLED SeriesSmallHD UltraBright SeriesSmallHD 500 Series, 700 SeriesAtomos Ninja SeriesAtomos Shogun FlameBlackmagic Video Assist 5”Blackmagic Video Assist 4K 7” Other accessory's weights are less than 1.5kg. Package Includes:1 x Monitor Mount2 x Allen Wrench Product Dimensions: 42 x 41.8 x 34mmPackage Dimensions: 76 x 63 x 40mmNet Weight: 79g±5gPackage Weight: 104g±5gMaterial(s): Aluminum Alloy, Stainless Steel   Note: Due to continuous efforts to improve the product and product features, both the pictures and specifications may vary slightly from the delivered product.

SmallRig Arca Plat for DJI RS 2 and RSC 2 Gimbal The SmallRig Arca Quick Release Plate for DJI RS 2 and RSC 2 Gimbal 3154 is designed to attach to the camera cage with two 1/4"-20 screws to fit RS 2 and RSC 2 gimbals, and solves the twisting problem that the original Arca plate can only attach to the cage with a 1/4 screw. Compared to the original Arca plate, the 3154 plate is 10mm longer and increases the range of left and right adjustment to mount cameras with special shapes, such as the BMPCC 4K caged camera. The distance between the two locking 1/4 screws is 18mm, which is compatible with most SmallRig cages, such as Sony A7S III cage 2999, Canon R5/R6 cage 2982, Nikon cage 2926 for Z series cameras, etc. In addition, the plate features an open center design so you can access most camera mounting screws through the plate and easily remove the camera from the cage to place it on a tripod or other mount. The plate also features rubber bumpers to protect the cage. Advantages at a glance: Designed for SmallRig cages & DJI RS 2 and RSC 2 gimbals.Locks the camera cage via two 1/4"-20 captive screws to prevent twisting.Extends 10mm to increase range for horizontal adjustments.Works with SmallRig BMPCC 4K cage for balance.Open access to most camera cage mounting screws. For technicians: Product dimensions: 60 x 38 x 12mm.Net weight: 20gMaterial(s): Aluminum alloy Fits the following products: DJI RS 2 DJI RSC 2 DJI RS 3 DJI RS 3 Pro DJI RS 4 DJI RS 4 Pro  Scope of delivery: 1 x plate1 x Allen key   Note: Due to continuous efforts to improve the product and product features, both the pictures and specifications may vary slightly from the delivered product.

SmallRig Arri Locating Handle The handle is supplied with a 15 mm rod clamp, several 1/4" and 3/8" threaded holes, several fixing holes and some built-in ISO flash shoe and thus offers various mounting options.Can be quickly mounted to a camera cage using the Arri fixing pins and 3/8" knurled screw. The fixing pins are not fixed and the whole thing can also be mounted without this pin.The knurled screw can be tightened or checked with the supplied Allen key. On the front of the handle there is a built-in anti-off pin which prevents the product from accidentally coming loose in the flash shoe. The SmallRig Arri fixing handle is a one-piece, semicircular handle that can be locked with two Arri fixing pins and a 3/8'' knurled screw. Specially designed SmallRig camera cages are the following: 2129 2125 2013 2031 2062 2087 2098 2127The handle can also be mounted on any other camera cage.   Product specification:Product dimensions:124 X24.5X68mmProduct weight:172gMaterial: Aluminum alloy stainless steel Included in delivery: 1 x Arri locating handle1 x Allen key   Note: Due to continuous efforts to improve the product and product features, both the pictures and specifications may vary slightly from the delivered product.