Godox V860 MK3 Kit TTL Camera Flash for Fuji

Godox CF-07 color filter set for clip-on flashesThe Godox Speedlight CF-07 color filter set is a selection of correction and effect filters for your clip-on flash. The set consists of 7 color filters (5 per color) that attach to the flash head with Velcro. With this set you can quickly and easily use color filters for a variety of effects.FeaturesVelcro fastenerSet of 7 different color filters (5 per color)Size of the filters: 39x80mmIncluded in delivery: 5x 010 color filter medium yellow5x 026 color filter light red5x 079 color filter light blue5x 204 Full CT Orange color filter5x 205 1/2 CT Orange Color Filter5x 206 1/4 CT Orange Color Filter5x 244 Color Filter Full Plus GreenVelcro fastenerFilter Holder

The battery is empty, the charger is at home, and the next job is tomorrow morning. A second charger in your camera bag solves this once and for all. The VC26 charges over USB-C and so needs no mains adapter, only a cable you already carry. For the Godox Li-Ion batteries of the VB26 series and the VB30 Charges over USB-C, from a power bank, laptop or phone charger Full battery in around 3.5 hours LED indicator shows the charge state at a glance Charging without a mains adapter Power comes over USB-C The VC26 has no mains plug of its own, just a USB-C port. You charge from the power bank in your bag, a laptop or a phone charger, without carrying another adapter. Compact for the side pocket The cradle is small enough for the side pocket of a camera bag, so it is the charger that can always come along. How this works in practice A second unit for the road One stays at home on the socket, the VC26 goes in the bag. You are ready at the next job without having to think about the charger. What you should know before you order Charges both ranges The VC26 takes both the VB26 series and the VB30. If you own flashes from both ranges, this one charger is enough. It also charges the WB100 battery of the AD100Pro. Charges one battery, none included The VC26 charges one battery at a time. If you need three bays at once, the VC26T is the right choice. The battery itself is not included. Technical details at a glance Type: single cradle VC26 Power: USB-C, no mains adapter needed Charge time: around 3.5 hours Charges: VB26 series, VB30 and WB100 (AD100Pro) Scope of delivery 1 x Godox VC26 charger

Godox AK-R25 adapter to square clip-on flash headThe AK-R25 adapter holder for square flash heads allows you to use a square Godox flash head with the AK-R21 projection attachment. Key features:Adapts square flash heads to the AK-R21 projection attachment.Scope of delivery:1 x Godox AK-R25 Square Flash Head Adapter Holder to AK-R21 Projection Attachment.

Godox Xpro II Wireless Flash Remote Trigger to Fujifilm The XPro II TTL wireless flash trigger is designed to work with the Godox X wireless 2.4 GHz system, providing effective and reliable flash triggering up to 100 meters away. This updated model is compatible with the Fujifilm TTL system, including support for high-speed sync up to 1/8000 second, and offers advanced control options for working with system-specific functions. For maximum reliability and control, you can set up 16 groups on one of 32 channels, then access 99 wireless ID settings to limit interference with other nearby systems. In addition, this wireless shutter now features Bluetooth connectivity for remote operation with the Godox APP. Simply download the GodoxPhoto app to a compatible iPhone or Android smartphone or tablet, and you can remotely adjust flash mode, power, modeling light, high-speed sync, and more. In addition to the basic manual and TTL control modes, other settings are also available, including strobe flash and second-curtain sync. You can set flash exposure compensation from -3 to 3 EV and wirelessly control modeling light, zoom setting, and more. Compatible with the Godox X 2.4 GHz wireless radio system, these are eg. Godox AD200ProGodox AD300ProGodox Witstro AD400ProGodox Witstro AD600ProGodox AD1200proGodox flash generator P2400Godox V1 to Fujifilm  (also Godox V1 flashes to other brands)Godox V860-III to Fujifilm (also Godox V860 III flashes to other brands)Godox TT685-II to Fujifilm (also Godox TT685 II flashes to other brands). Technical features: Effectively and reliably triggers flashes up to 100 meters awaySupports high-speed synchronization up to 1/8000 second16 groups on 32 channels with access to 99 wireless ID settingsStroboscopic flash and second curtain synchronizationAdjusts flash exposure compensation from -3 to +3 EVControl of modeling light, zoom setting and moreBluetooth connectivity for remote control via the GodoxPhoto app2.5mm sync port supports triggering via wired connectionUSB Type-C port for firmware updatesOperates on two AA batteries for added convenience What makes version 2 different from version 1 of the Xpro in detail? Improved compatibility for mirrorless camerasNew flip-lock mounting mechanismStorage of user settings in 5 different memory locations for later recallNew individual modeling lamp control (adjust modeling lamp for each light separately in proportional and percentage)Firmware update via USB-C to PC or Mac with Godox V3 UtilityChannel scan function (scan your location for the least interference)New Sekonic L-858 integration (trigger your lights via Sekonic L858 meter).Improved TCM function (convert TTL flash exposures to manual power settings, now with more supported Godox flash units)New menu interface Scope of delivery: 1 x Godox Xpro-II to Fujifilm    You can find all the technical details in the Godox XproII to Fujifilm instruction manual in English

Anyone working regularly with flash ends up with three or four batteries in circulation. After the event they are all empty, and you put them one after another into the same cradle, turning the evening into a charging shift. The VC26T charges three batteries at once and is done by morning, with no swapping overnight. Charges three Godox batteries at once, VB26 series and VB30 Full battery in around 1.4 hours, much faster than a single cradle Runs on 100 to 240 volts, so it works abroad too Kettle cable included, ready to use out of the box One unit instead of three cradles Three batteries in parallel Instead of three single cradles and three cables, the VC26T charges all your batteries at once. That saves space, cables and above all time in the evening. Faster than a single cradle In around 1.4 hours all three batteries are full. If you have an early start, your gear is ready in time. How this works in practice Heavy flash users with several batteries After the wedding all batteries go into the VC26T, one cable into the socket, and by morning everything is charged. No swapping overnight. What you should know before you order Charges both ranges The VC26T takes both the VB26 series and the VB30. If you own flashes from both ranges, this one charger is enough. Needs a socket Unlike the VC26 with USB-C, the VC26T runs from the mains via the included kettle cable. For purely mobile charging from a power bank, the VC26 is the better choice. Batteries are not included. Technical details at a glance Type: triple charger VC26T Capacity: three batteries at once Input voltage: 100 to 240 V Charge time: around 1.4 hours Charges: VB26 series and VB30 Scope of delivery 1 x Godox VC26T charger 1 x kettle cable

Softbox large for clip-on flashes RSB-L This large softbox creates even and soft light with your flash unit - hard shadows are a thing of the past. With this Sofbox you provide ideal illumination and eliminates störende flash reflections. The inner walls are coated with a reflective surface and ensure an even light dispersion.The attachment of the softbox über an elastic band, which is wrapped around the flash unit. The rubberized inside of the straps prevents the box from slipping on the system flash.The advantages at a glance: Large softbox for clip-on flashes. Easy to attach via Velcro - fits almost all flash units Illuminated area: 320 x 195 mm Mass HxWxD: 330 x 205 x 18 mm Robust materialFits many clip-on flash units: (list not exhaustive). Godox TT350, V350, TT685 I +II, V860 II + III Canon Speedlite 600EX 580EX I+II, 550EX, 540EZ, 520EZ, 430EX I+II, 420EX, 420EZ, 380EX Nikon Speedlight SB-900 SB-800, SB-700, SB-600, SB-28, SB-26, SB-25, SB-24 Sony HVL-58AM, HVL-56AM Nissin Di866, Di622 Yongnuo YN-560 II, YN-560 III, YN-565, YN-568Scope of delivery 1x Softbox 20x33 cm clip-on flashes RSB-L

Godox flash radio trigger for Fujifilm  Product description:   What is new with the TTL remote release from Godox? The X2T has a revised display and button layout. In addition, the trigger is now equipped with Bluetooth and can be easily controlled via smartphone with the app from Godox.   This allows all Godox flashes to be triggered wirelessly, which have a built-in X-System receiver, whether this is in TTL mode or manual mode does not matter. The zoom setting and flash output can of course be controlled remotely.   Shootings with external flashes become incredibly easy, because everything can be adjusted from a distance. No more climbing or running back and forth.   functions: - Radio triggering 2.4GHz flash release, TTL and manual- AutoFocus assistance light- Remote release control for TTL with +/- EV adjustment (3 levels in 1/3 steps - 18 different levels)- Mix TTL and manual flash control, fires multiple groups with TTL, unlike in manual mode- High speed synchronization, shutter speeds up to 1/8000s- Upgradeable via integrated USB port With this system you can trigger studio flashes as well as system flashes of the brand Godox manually or in TTL mode. Godox X2T-F offers up to 5 flash groups. The flash zoom can be adjusted dynamically. As you set your lens, the Godox X2T-F TCU will transfer the setting to the flash unit. The flash zoom can also be set manually. The transmitter unit works with a range of up to 100m with two AA/Mignon batteries each.   For the technicians:   Frequency: 2,4 GHzRange: up to 100mGroup: 5 - A, B, C Channels: 32Wireless ID: 01-99Max Sync Speed: 1/8000sWeight 90gFirmware upgrade via USB port type C   compatibility:   all current Fujifilm cameras which have TTL   Scope of delivery:   1x Godox X2T-F TTL transmitter     You can find all the technical details in the Godox X2T to Fujifilm instruction manual in English

You’re in the middle of a wedding ceremony, your flash stops working, and that moment won’t come again. Having a charged spare battery in your bag is the most affordable way to prepare for exactly this situation. The VB-26 is the same battery already powering your Godox flash and can be swapped out in just a few seconds. For Godox flash units with a VB-26 battery, including the V1, V860III, and Ring 72 3000 mAh capacity, good for about 480 flashes at full power Replacement in the flash takes seconds; no tools required Same design as the standard battery; no adapter required Not to be confused with the VB30, which is designed for other Godox flashes A second battery changes the way you work 3000 mAh for long events About 480 flashes at full power is the lower limit, not the best-case scenario. When using TTL indoors, your flash rarely fires at full power, so you’ll get even more out of it. For an entire event, though, it’s still better to plan with two batteries than with just one that you have to conserve. Swap Instead of Saving If you only have one battery with you, you’ll unconsciously use the flash more sparingly and miss shots. With a second one in your backpack, you don’t have to worry about that. You work until the flash alerts you, swap it out during the next break, and keep going. Here’s what that looks like in everyday life Wedding from the Reception to the Dance A day like this lasts over ten hours, and toward evening in the dark hall, the flash needs the most power. That’s exactly when the first battery runs out. With the spare battery, you can swap it out during the setup instead of in the middle of a speech. Photojournalism Without a Power Outlet On a construction site or out in the field, there’s no time to stop and charge. Two fully charged batteries in your bag will cover a full workday without you having to worry about the order of your shots. What You Should Know Before You Order Godox Makes Two Similar Batteries The VB-26 and VB30 look similar but aren’t interchangeable. The VB30 is used in the V1Pro, the V100, and the MF-T76 macro flash, among others. To be sure, check the battery currently in your flash—the model number is printed on it. If you’re unsure, give us a call—we can clear this up in two minutes. You can find the battery from the other series in Flash Accessories. The versions of the VB26 series are compatible Godox has continued to develop the battery over the years, which is why you’ll see model numbers with an appended letter. The versions differ in capacity but are identical in design and work with the same flash unit and charger. So you can easily use a newer battery alongside an older one without having to replace your charger. The runtime depends on the specific battery. It requires a charging cradle, even the latest version The VB-26 does not have its own USB port in any of its versions. So you always charge it in a charging cradle and not directly via the battery itself, unlike the VB30 from the other Godox series. If you already have the charger from your first battery, you don’t need anything else, since it works with all versions in the series. If you want to charge multiple batteries at once, you’ll find chargers for three batteries simultaneously in the flash accessories. Technical Details at a Glance Cell Type: Lithium-ion Voltage: 7.2 volts Capacity: 3000 mAh, 21.6 Wh Flashes per charge: approximately 480 at full power, depending on the flash unit Package Contents 1 x Godox VB-26 Li-Ion battery