Godox V860 MK3 Kit TTL Camera Flash for Pentax

Softbox large for clip-on flashes RSB-L This large softbox creates even and soft light with your flash unit - hard shadows are a thing of the past. With this Sofbox you provide ideal illumination and eliminates störende flash reflections. The inner walls are coated with a reflective surface and ensure an even light dispersion.The attachment of the softbox über an elastic band, which is wrapped around the flash unit. The rubberized inside of the straps prevents the box from slipping on the system flash.The advantages at a glance: Large softbox for clip-on flashes. Easy to attach via Velcro - fits almost all flash units Illuminated area: 320 x 195 mm Mass HxWxD: 330 x 205 x 18 mm Robust materialFits many clip-on flash units: (list not exhaustive). Godox TT350, V350, TT685 I +II, V860 II + III Canon Speedlite 600EX 580EX I+II, 550EX, 540EZ, 520EZ, 430EX I+II, 420EX, 420EZ, 380EX Nikon Speedlight SB-900 SB-800, SB-700, SB-600, SB-28, SB-26, SB-25, SB-24 Sony HVL-58AM, HVL-56AM Nissin Di866, Di622 Yongnuo YN-560 II, YN-560 III, YN-565, YN-568Scope of delivery 1x Softbox 20x33 cm clip-on flashes RSB-L

Godox CF-07 color filter set for clip-on flashesThe Godox Speedlight CF-07 color filter set is a selection of correction and effect filters for your clip-on flash. The set consists of 7 color filters (5 per color) that attach to the flash head with Velcro. With this set you can quickly and easily use color filters for a variety of effects.FeaturesVelcro fastenerSet of 7 different color filters (5 per color)Size of the filters: 39x80mmIncluded in delivery: 5x 010 color filter medium yellow5x 026 color filter light red5x 079 color filter light blue5x 204 Full CT Orange color filter5x 205 1/2 CT Orange Color Filter5x 206 1/4 CT Orange Color Filter5x 244 Color Filter Full Plus GreenVelcro fastenerFilter Holder

Godox X2T-P flash radio remote trigger for Pentax The Godox X2T-P is a wireless TTL flash trigger designed specifically for Pentax cameras. It gives photographers precise and flexible control over their flash units, both in the studio and on location, supporting features such as high-speed synchronization and multiple flash. General product description Key features of the X2T-P include: Support for P-TTL flash mode: This ensures automatic flash exposure for accurate and consistent results. 32 channels and 5 groups: These allow for simultaneous control of multiple flash units without interference or organization issues. Range of up to 100 meters: Offers flexibility in positioning the flash units without compromising on control. Large LCD screen: For clear and intuitive operation of the settings. Bluetooth connectivity: Enables control via the Godox app on smartphones or tablets, providing added flexibility. Features and benefits A standout feature of the X2T-P is its built-in Bluetooth capability. Via the Godox Photo App, photographers can conveniently control flash mode, light output, modeling light and other parameters from their smartphone or tablet. This makes it easier to adjust settings, especially in dynamic shooting situations. In addition, the trigger has high-speed synchronization (HSS) up to 1/8000s, which allows you to take pictures with a large aperture in bright ambient light. Compatibility The Godox X2T-P is compatible with a wide range of Godox flash units, including camera flash units, outdoor flash units and studio flash units that support the Godox 2.4GHz Wireless X system. Thanks to the Bluetooth function, the trigger can be controlled via the Godox Photo App on Android and iOS devices. Technical details Wireless technology: 2.4 GHz Range: Up to 100 meters Channels: 32 Groups: 5 Supported modes: TTL, manual, multiple flash HSS: Up to 1/8000s Power supply: 2x AA batteries (not included) Dimensions: Approx. 72 x 70 x 58 mm Weight: Approx. 95 g Package contents Godox X2T-P Transmitter for Pentax Instruction manual The Godox X2T-P offers photographers a reliable and versatile solution for wireless flash control, combined with modern features such as Bluetooth control and high-speed synchronization to meet the needs of both studio and location . You can find all the technical details in the Godox X2T-P to Pentax manual

The battery is dead, the charger is at home, and your next shoot is tomorrow morning. Having a second charger in your camera bag solves this problem once and for all. The VC26 charges via USB-C, so it doesn’t need its own power adapter—just a cable that you’re carrying with you anyway. For Godox Li-ion batteries in the VB26 series and the VB30 Charges via USB-C, so you can use a power bank, laptop, or cell phone charger Fully charged in about 3.5 hours LED indicator shows the charge level at a glance Compact enough to fit in the side pocket of a camera backpack Charges without a dedicated power adapter Power comes via USB-C The VC26 doesn’t have its own power plug; instead, it has a USB-C port. This lets you charge it from your laptop, a power bank in your backpack, or your phone’s charger. When traveling, you save on an extra device and an adapter, and in the car, all you need is a USB port. Battery level at a glance An LED shows you whether the battery is still charging or fully charged. That may sound trivial, but it saves you from wondering in the morning before you leave whether the battery really did charge fully overnight. Here’s what it looks like in everyday use A second charger for your backpack Most people buy the VC26 as a second charger that stays in their camera bag at all times. That way, you have one at home at your desk and one in your luggage, and you’ll never leave it on the kitchen table again. Charging in the car between appointments There’s often a forty-minute drive between the wedding ceremony and the reception. With the VC26 plugged into the car’s USB port, the drained battery gets recharged quite a bit, instead of letting the drive go to waste. What you should know before ordering All versions of the VB26 series are compatible Godox has continued to develop the VB26 over the years, which is why the batteries have a suffix letter depending on their generation. This doesn’t matter for the charger—the design has remained the same across all versions. So you can charge both an older and a newer battery in the same device. The VB30 can also be charged with it In addition to the VB26 series, the VC26 also accommodates the VB30, which is used in other Godox flashes. So if you use both series, one charger is all you need—no need to carry around two charging cradles. While the VB30 itself can also be charged directly via USB-C on the battery, the flash remains ready for use while in the cradle. Cable and power adapter are not included The charging cradle is shipped on its own. A USB-C cable and power adapter are not included, since most people already have several of these at home. So plan to use a cable you already have, or let us know when you place your order, and we’ll include one for you. Only one battery at a time The VC26 charges one battery at a time. If you work with three or four batteries and want to charge them all overnight, a multi-battery charger is the better option. You can find the selection in flash accessories. Technical Details at a Glance Compatible Batteries: All versions of the Godox VB26 series, as well as the VB30 Power Supply: USB-C Charging Time: About 3.5 hours for a full battery Display: LED for charge status Capacity: one battery at a time Package Contents 1 x Godox VC26 charger

If you use a flash regularly, you’ll eventually end up with three or four batteries in rotation. After an event, they’re all dead, and you end up plugging them into the same charger one after another, turning your evening into a charging session. The VC26T charges three batteries at once and is ready by morning, without you having to switch them out overnight. Charges three Godox batteries simultaneously: VB26 series and VB30 Fully charged in about 1.4 hours—significantly faster than a single charging tray Operates on 100 to 240 volts, so it works abroad too Power cord included; ready to use right out of the box One device instead of three charging cradles and three cables For frequent flash users with multiple batteries in rotation Three batteries, one device, one outlet Simultaneously instead of one after another Three slots mean you can plug everything in after the event and not have to worry about it anymore. If you use single-battery chargers, you have to switch them out twice—and experience shows you’ll never get the timing right. Either way, everything’s fully charged by morning—just without the overnight shift. About 1.4 hours per cycle The device charges noticeably faster than a simple USB charger. If you return from your first appointment in the afternoon and have to head out again in the evening, the break in between is enough time to charge a full set of batteries. Here’s what it looks like in everyday life Wedding season with appointments on consecutive days During peak season, you have one event on Saturday and one on Sunday. On Saturday night, you put all the batteries in the VC26T; on Sunday morning, you pack a full set. Without a multi-charger, it turns into a game of math figuring out which battery goes in when. Traveling with a single outlet in your hotel room In hotels, outlets are scarce and usually already occupied by a laptop and cell phone. One device for three batteries instead of three individual chargers solves this problem, and since it operates from 100 to 240 volts, you only need the plug adapter for your destination country. What You Should Know Before Ordering Accommodates Both Godox Series The slots fit both the VB26 series and the VB30. Godox has continued to develop the VB26 over the years, adding a letter to the model name depending on the generation, while the design has remained the same. This means you can use older and newer batteries together. If you’re using flashes from both series, this single device covers everything. It’s only worth it starting with the third battery If you’re working with one or two batteries, a single charging tray is sufficient and takes up less space in your luggage. The VC26T really shows its strength when three batteries regularly run out at the same time. You can find individual charging cradles in the flash accessories. Technical Details at a Glance Compatible batteries: Godox VB26 series (all versions) and VB30 Capacity: three batteries at once Input: 100 to 240 volts via IEC power cord Output: 8.4 volts, 1.35 A Charging time: approximately 1.4 hours Package Contents 1 x Godox VC26T charger 1 x IEC power cord

Godox Xpro-P wireless flash trigger for Pentax The Godox Xpro-P wireless flash trigger for Pentax is an advanced wireless trigger designed specifically to enable control of Godox flash units with a built-in 2.4 GHz radio system, as well as compatible original Pentax flash units. With this trigger, you can control your flash units efficiently and reliably, giving you more creative freedom when taking pictures. The Godox Xpro-P is characterized by its comprehensive functionality and user-friendliness. The most important features include: Support for TTL flash: Enables automatic flash exposure metering for precise exposure results. Manual flash mode: Enables you to manually adjust flash output to achieve specific lighting effects. Stroboscopic flash mode: Enables you to create creative lighting effects using rapid flash sequences. High-speed sync (HSS): Supports shutter speeds of up to 1/8000 of a second, ideal for shooting in bright ambient light or with a large aperture. Support for 16 groups and 32 channels: Provides flexibility in organizing and controlling multiple flash units simultaneously. Large LCD display: Clearly displays all important settings and makes operation easier. Features and benefits One of the Xpro-P's outstanding features is its ergonomic design, which allows for intuitive operation. Five group buttons and a control dial provide quick access to settings, making work easier both in the studio and on location. In addition, the trigger has a USB Type-C port for firmware updates, so you can always take advantage of the latest features. Compared to similar models, the Xpro-P stands out for its comprehensive support for the Godox 2.4 GHz Wireless X system, which allows seamless integration with a wide range of Godox flash units. Compatibility The Godox Xpro-P is compatible with a wide range of Pentax cameras that have a standard ISO hot shoe. These include, but are not limited to: Pentax K-1 Pentax K-3 II Pentax K-5 II Pentax K-70 Pentax KP Technical Details Radio frequency: 2.4 GHz Range: Up to 100 meters Channels: 32 Groups: 16 Power supply: 2 × AA batteries Dimensions: 90 × 58 × 50 mm Weight: 80 g Ports: USB Type-C for firmware updates, 2.5 mm sync socket Contents Godox Xpro-P wireless flash trigger Protective case User manual With the Godox Xpro-P, you get a powerful and versatile flash trigger that expands your photographic options and helps you achieve professional results.  

Godox AK-R25 adapter to square clip-on flash headThe AK-R25 adapter holder for square flash heads allows you to use a square Godox flash head with the AK-R21 projection attachment. Key features:Adapts square flash heads to the AK-R21 projection attachment.Scope of delivery:1 x Godox AK-R25 Square Flash Head Adapter Holder to AK-R21 Projection Attachment.

You’re in the middle of a wedding ceremony, your flash stops working, and that moment won’t come again. Having a charged spare battery in your bag is the most affordable way to prepare for exactly this situation. The VB-26 is the same battery already powering your Godox flash and can be swapped out in just a few seconds. For Godox flash units with a VB-26 battery, including the V1, V860III, and Ring 72 3000 mAh capacity, good for about 480 flashes at full power Replacement in the flash takes seconds; no tools required Same design as the standard battery; no adapter required Not to be confused with the VB30, which is designed for other Godox flashes A second battery changes the way you work 3000 mAh for long events About 480 flashes at full power is the lower limit, not the best-case scenario. When using TTL indoors, your flash rarely fires at full power, so you’ll get even more out of it. For an entire event, though, it’s still better to plan with two batteries than with just one that you have to conserve. Swap Instead of Saving If you only have one battery with you, you’ll unconsciously use the flash more sparingly and miss shots. With a second one in your backpack, you don’t have to worry about that. You work until the flash alerts you, swap it out during the next break, and keep going. Here’s what that looks like in everyday life Wedding from the Reception to the Dance A day like this lasts over ten hours, and toward evening in the dark hall, the flash needs the most power. That’s exactly when the first battery runs out. With the spare battery, you can swap it out during the setup instead of in the middle of a speech. Photojournalism Without a Power Outlet On a construction site or out in the field, there’s no time to stop and charge. Two fully charged batteries in your bag will cover a full workday without you having to worry about the order of your shots. What You Should Know Before You Order Godox Makes Two Similar Batteries The VB-26 and VB30 look similar but aren’t interchangeable. The VB30 is used in the V1Pro, the V100, and the MF-T76 macro flash, among others. To be sure, check the battery currently in your flash—the model number is printed on it. If you’re unsure, give us a call—we can clear this up in two minutes. You can find the battery from the other series in Flash Accessories. The versions of the VB26 series are compatible Godox has continued to develop the battery over the years, which is why you’ll see model numbers with an appended letter. The versions differ in capacity but are identical in design and work with the same flash unit and charger. So you can easily use a newer battery alongside an older one without having to replace your charger. The runtime depends on the specific battery. It requires a charging cradle, even the latest version The VB-26 does not have its own USB port in any of its versions. So you always charge it in a charging cradle and not directly via the battery itself, unlike the VB30 from the other Godox series. If you already have the charger from your first battery, you don’t need anything else, since it works with all versions in the series. If you want to charge multiple batteries at once, you’ll find chargers for three batteries simultaneously in the flash accessories. Technical Details at a Glance Cell Type: Lithium-ion Voltage: 7.2 volts Capacity: 3000 mAh, 21.6 Wh Flashes per charge: approximately 480 at full power, depending on the flash unit Package Contents 1 x Godox VB-26 Li-Ion battery