Tascam CA-AK1-C Adapter Canon CA-XLR2d

First-class sound quality for your video recordings for Fuji X-T4, X-S10 und GFX100SA flexible approach to professional audio recording with virtually any cameraThe CA-XLR2d is a dual-channel microphone adapter and preamplifier that makes it possible to record high-quality professional stereo sound with a mirrorless or other camera using external microphones. The audio signal - in digital or analog form - is transmitted directly to the camera and recorded along with the video signal, eliminating the need for subsequent synchronization and reducing post-production time.Choose the most suitable microphone for your film recordingChoose the microphone or input signal that best suits your application. From a single shotgun mic for interviews or conversations to two dynamic or condenser mics for stereo recording. Or feed the entire audio mix through a line-level connection from the main mixing console - with the CA-XLR2d, you'll be ready for all the shooting and filming work ahead.Powerful A/D converter for pristine, natural soundThanks to Tascam's years of experience in audio technology and high-quality A/D converters, the CA-XLR2d stands for clean, noise-free, professional sound. By transmitting a digital audio signal directly to the camera via a compatible accessory shoe, it eliminates a second conversion step that could cause noise or distortion. It also eliminates the need for subsequent synchronization of image and audio in post-production.Main features at a glanceTwo XLR/TRS input jacks allow the use of the optimal microphone depending on the situation and locationA high-performance A/D converter transmits digital audio signals directly and unaltered to the camera via the accessory shoe (compatible manufacturers: Canon, Fujifilm)Power is supplied from the camera via the corresponding accessory shoe (compatible manufacturers: Canon, Fujifilm)Built-in Tascam HDDA (High Definition Discrete Architecture) microphone preamplifier for best sound quality, low noise and wide dynamic range (level switchable mic/line, 48-volt phantom power)Additional 3.5mm stereo mini-jack input for a lavalier or small microphone that requires a power supplyCan be used with virtually all cameras with analog input thanks to included accessories (battery compartment, camera shoe, detachable microphone mount with built-in shock protection, analog audio cable)Passive hot shoe holder on top for additional adapters or accessoriesAnalog audio output, usable in two ways:Camera mode for transferring the audio signal to the microphone input of the cameraHeadphone mode for direct listening with headphonesInterchangeable camera shoeCA-AK1-C and CA-AK1-F for use with Canon and Fujifilm cameras respectivelyBy interchanging the camera shoe, a single CA-XLR2d can be used with both Canon and Fujifilm camerasSwitchable input level cut: 0 dB / 20 dB / 46 dBSwitchable low-cut filter: Off / 80 Hz / 220 HzSwitchable limiter (level limiter)Optional automatic level controlOverload indicator for each inputInput level, automatic/manual level control and limiter of inputs 1 and 2 can be stereo-coupledTransparent protective cover to prevent accidental changes to settingsPractical cable holderThe CA-XLR2d is powered by a compatible camera via the hot shoe. This means you don't need an additional power supply and your setup stays compact and tidy (compatible manufacturers: Canon, Fujifilm).Use the microphones and gear you need for your shootThe CA-XLR2d is flexible enough that you can use it with the microphones and gear you need for your particular film session. The hot shoe on the top, for example, is impervious to vibration, quiet, and can accommodate your favorite microphone or a wireless receiver or transmitter. Two XLR/TRS inputs and a 3.5mm stereo mini input are available for virtually any handheld dynamic or condenser microphone, shotgun, lavalier or other microphone.Built-in processing and user-friendly operation for superior recording qualityIncluded audio processing functions such as auto level, low-cut filter, and limiter are accessible via convenient switches. What's more, the CA-XLR2d lets you link two input channels so you can control input gain and level and limiter settings for the left and right channels simultaneously when recording in stereo.Premium sound quality is achieved with professional electronics, 16- or 24-bit resolution, and sampling frequencies of 48 kHz or 96 kHz.Improve the sound quality of your current cameraDon't worry if your camera's hot shoe can't handle a digital audio signal or power the Tascam microphone adapter. The CA-XLR2d-AN analog kit is suitable for virtually any camera that has an analog audio input. Attach the included battery box (two AA batteries) and connect the analog output of the CA-XLR2d to the microphone or audio input of the camera using the included stereo audio cable. In this way, you can benefit from the high-quality microphone preamplifiers and audio processing functions and significantly improve the sound of your movie recordings.

First-class sound quality for your video recordingsA flexible approach to professional audio recording with virtually any cameraThe CA-XLR2d is a dual-channel microphone adapter and preamplifier that makes it possible to record high-quality professional stereo sound with a mirrorless or other camera using external microphones. The audio signal - in digital or analog form - is transmitted directly to the camera and recorded along with the video signal, eliminating the need for subsequent synchronization and reducing post-production time.Choose the most suitable microphone for your movie recordingChoose the microphone or input signal that best suits your application. From a single shotgun mic for interviews or conversations to two dynamic or condenser mics for stereo recording. Or feed the entire audio mix through a line-level connection from the main mixing console - with the CA-XLR2d, you'll be ready for all the shooting and filming work ahead.Powerful A/D converter for pristine, natural soundThanks to Tascam's years of experience in audio technology and high-quality A/D converters, the CA-XLR2d stands for clean, noise-free, professional sound. By transmitting a digital audio signal directly to the camera via a compatible accessory shoe, it eliminates a second conversion step that could cause noise or distortion. It also eliminates the need for subsequent synchronization of image and audio in post-production.The CA-XLR2d is powered by a compatible camera via the hot shoe. This means you don't need an additional power supply and your setup stays compact and tidy (compatible manufacturers: Canon, Fujifilm).Use the microphones and gear you need for your shootThe CA-XLR2d is flexible enough that you can use it with the microphones and gear you need for your particular film session. The hot shoe on the top, for example, is impervious to vibration, quiet, and can accommodate your favorite microphone or a wireless receiver or transmitter. Two XLR/TRS inputs and a 3.5mm stereo mini input are available for virtually any handheld dynamic or condenser microphone, shotgun, lavalier or other microphone.Built-in processing and user-friendly operation for superior recording qualityIncluded audio processing functions such as auto level, low-cut filter, and limiter are accessible via convenient switches. What's more, the CA-XLR2d lets you link two input channels so you can control input gain and level and limiter settings for the left and right channels simultaneously when recording in stereo.Premium sound quality is achieved with professional electronics, 16- or 24-bit resolution, and sampling frequencies of 48 kHz or 96 kHz.Improve the sound quality of your current cameraDon't worry if your camera's hot shoe can't handle a digital audio signal or power the Tascam microphone adapter. The CA-XLR2d-AN analog kit is suitable for virtually any camera that has an analog audio input. Attach the included battery box (two AA batteries) and connect the analog output of the CA-XLR2d to the microphone or audio input of the camera using the included stereo audio cable. In this way, you can benefit from the high-quality microphone preamplifiers and audio processing functions and significantly improve the sound of your movie recordings.Main features at a glanceTwo XLR/TRS input jacks allow the use of the optimal microphone depending on the situation and locationA high-performance A/D converter transmits digital audio signals directly and unaltered to the camera via the accessory shoe (compatible manufacturers: Canon, Fujifilm)Power is supplied from the camera via the corresponding accessory shoe (compatible manufacturers: Canon, Fujifilm)Built-in Tascam HDDA (High Definition Discrete Architecture) microphone preamplifier for best sound quality, low noise and wide dynamic range (level switchable mic/line, 48-volt phantom power)Additional 3.5mm stereo mini-jack input for a lavalier or small microphone that requires a power supplyCan be used with virtually all cameras with analog input thanks to included accessories (battery compartment, camera shoe, detachable microphone holder with built-in shock protection, analog audio cable)Passive hot shoe holder on top for additional adapters or accessoriesAnalog audio output, usable in two ways:Camera mode for transferring the audio signal to the microphone input of the cameraHeadphone mode for direct listening with headphonesInterchangeable camera shoeCA-AK1-C and CA-AK1-F for use with Canon and Fujifilm cameras respectivelyBy exchanging the camera shoe, a single CA-XLR2d can be used with both Canon and Fujifilm camerasSwitchable input level cut: 0 dB / 20 dB / 46 dBSwitchable low-cut filter: Off / 80 Hz / 220 HzSwitchable limiter (level limiter)Optional automatic level controlOverload indicator for each inputInput level, automatic/manual level control and limiter of inputs 1 and 2 can be stereo-coupledTransparent protective cover to prevent accidental changes to settingsPractical cable holder