Take control of your flash lighting directly from your camera: The Yongnuo YN-622N-TX is an i-TTL wireless flash controller for compatible Nikon cameras. It lets you trigger compatible flash units wirelessly and adjust their settings using the built-in LCD display. Control flash output, exposure compensation and zoom for up to three flash groups without having to adjust each flash individually. Whether in the studio or on location, the YN-622N-TX gives you flexible options for creative lighting. i-TTL wireless flash controller for compatible Nikon cameras Control up to 3 flash groups (A/B/C) TTL, manual and Super Sync modes Flash output and flash exposure compensation adjustable in 1/3-stop increments Individual zoom control for each group 7 wireless channels and up to 100 m range Convenient flash control via LCD Adjust settings directly on the transmitter The built-in LCD displays the main flash parameters clearly. You can adjust TTL functions such as flash exposure compensation (FEC) as well as manual flash output directly on the controller. This avoids navigating through the camera menu and lets you adapt your lighting quickly to changing shooting conditions. Combine three flash groups flexibly Control up to three groups with different settings. Combine TTL, manual and Super Sync groups to balance key, fill and effect lighting. The zoom position of each flash head can be adjusted individually for every group. Versatile synchronisation options TTL, high-speed sync and second-curtain sync The YN-622N-TX supports TTL flash control, manual flash control, high-speed sync (HSS / Auto FP) and second-curtain sync. This allows you to work creatively with flash even at fast shutter speeds or when capturing motion. Super Sync for compatible flash units The Super Sync function can, under suitable conditions, allow studio flashes and speedlights without HSS support to be used at shutter speeds above the normal flash sync speed. Results depend on the flash unit, camera and settings used. For studio and outdoor photography Wireless control with up to 100 m range With seven wireless channels and a range of up to 100 m, you can position your flash units flexibly. The system is suitable for portrait, fashion, product and event photography where you want to shape light independently of the camera position. Firmware updates and additional connections Firmware updates can be installed via the USB port. A PC-sync port also allows integration into compatible wired flash setups. The built-in AF assist beam helps with focusing in low-light conditions. What to know before ordering Check compatibility The YN-622N-TX is designed for compatible Nikon cameras with i-TTL support and works with Yongnuo YN-622N i-TTL wireless transceivers. Please check the compatibility of your camera and flash units before purchasing. Batteries not included The controller requires two AA batteries, which are not included. Technical details at a glance Product type: i-TTL wireless flash controller / transmitter Brand: Yongnuo Model: YN-622N-TX Camera connection: Nikon hot shoe Compatible system: Yongnuo YN-622N i-TTL Flash groups: 3 (A/B/C) Wireless channels: 7 Wireless range: up to 100 m Flash modes: i-TTL, manual, Super Sync Sync modes: HSS / Auto FP, second-curtain sync Flash output / FEC adjustment: 1/3-stop increments Zoom control: individual per group Connections: USB, PC sync Power supply: 2 x AA batteries Display: LCD Product number: 4A-YN622-N-TX Scope of delivery 1 x Yongnuo YN-622N-TX controller 1 x User manual (English / Chinese) 1 x LS-2.5/N1 camera cable 1 x LS-2.5/N3 camera cable The German manual for the Yongnuo YN-622N TX E-TTL can be found here  

Yongnuo YN-622N II i-TTL radio flash output for Nikon and Yongnuo The new flash trigger offers automatic TTL exposure metering without the need for a line of sight between camera and flash. The range of the YN-622 can be up to 100m. The YN-622 is larger than the Yongnuo RF-603 and has almost the same dimensions as the Pixel Kings. However, this allows the use of inexpensive AA batteries and provides space for convenient buttons. The YN-622 supports TTL, manual flash mode, 3 channels and 3 groups, high-speed synchronisation (HSS) up to 1/8000s, automatic zoom, exposure compensation, AF auxiliary light, PC Sync and many other features. The wireless receiver offers a function called HyperSync. This enables faster sync times even with studio flashes or other manual flashes. The new YN-622 fits perfectly into the Yongnuo product line and is available for Canon and Nikon DSLRs. Compatible are all flashes from Yongnuo, Canon's EX II and Nikon i-TTL flashes. Features Compatible flash mode: i-TTL II / Manual / MultiCompatible shutter sync: 1st curtain, 2nd curtain, high-speed sync. Curtain, high-speed synchronisation (HSS / FP) Max 1/8000sControl via the with camera flash menuPC port can output 1st/2nd/HSS signal studio flash; Flash Exposure Compensation (FEC)Flash Exposure Bracketing (FEB)Flash Exposure Lock (FEL)Flash Zoom (Auto, Manual)Tool LightE-TTL Group Ratio (ALL / A: B / A: B C)Manual / Multi Group (ALL / A: B / A: B: C)Live-View controlFocus Assist lightHigh-speed continuous shooting controlSpeedlite flashes on the hot shoe of the transmitter support i-TTLCompatible with all YONGNUO / Nikon i-TTL flash unitsSettings automatically memorised Settings automatically savedSingle-contact cameraDue to Nikon's i-TTL system, it is not possible to control the YN-622N via the camera name. This is done either directly on the transceiver via certain button combinations or via a commander/master-compatible flash unit (SB-700, SB-900, SB-910, SU-800) that can be placed in the hot shoe of the transmitter. This allows you to use the radio system of the YN-622 trigger instead of the infrared signal of the master unit, thus increasing the range of the entire system. Compatible cameras D600, D610, D700, D800, D800E D70, D70s, D80, D90D200, D300, D300sD7000D5000, D5100D3000, D3100, D3200D3, D3s, D4 Compatible flash units Yongnuo YN-465, YN-467, YN-468 II, YN-565, YN-568Nikon SB-400, SB-600, SB-700, SB-800, SB-900, SB-910Nikon SU-800, SB-700, SB-900 and SB-910 can be used as a master unit Scope of delivery 1 x YN-622N II Transceriver The German manual for the Yongnuo YN-622N E-TTL can be found here

Yongnuo YN-622C-Wireless e-TTL Flash Controller Kit for Canon Yongnuo's new radio TTL flash trigger YN-622 is available now! The new flash trigger offers automatic exposure metering TTL without the need of a line of sight between camera and flashes. Infrared bases systems like ST-E2 often suffer from being hidden inside soft boxes or behind bounders which are no problem for radio based systems. Typically radio triggers offer a maximum range of up to 100m under best circumstances. The YN-622 is much bigger than the manual trigger RF-603 and nearly the same dimensions as the Pixel King. This allows the use of widely used AA batteries and comfortable buttons. It supports TTL, manual flash mode, 3 channels and 3 groups, high speed sync (HSS) up to 1/8000s, automatic zoom, exposure compensation, AF assist beam, PC sync and a lot more features. Apparently the radio trigger offers a function called hypersync. This allows shorter sync speeds even with studio flashes or other manual flashes. The new YN-622 fits perfectly in the Yongnuo product line and will be first available for Canon DSLR, probably later for Nikon. Compatible are all flashes by Yongnuo and Canon's EX II flashes. Features Compatible flash mode: E-TTL II/Manual/Multi Compatible Shutter sync: 1st curtain, 2nd curtain, High speed sync (HSS/FP) Max 1/8000s Control remote speedlites using camera's build-in flash menu PC port can output 1st/2nd/HSS signal to trigger studio flash Flash Exposure Compensation (FEC) Flash Exposure Bracketing (FEB) Flash Exposure Lock (FEL) Flash zooming (auto，manual) Modeling Flash E-TTL group ratio (ALL/A:B/A:B C) Manual/Multi Group (ALL/A:B/A:B:C) Live view triggering Focus Assist Lamp High-speed continuous shooting trigger Speedlites on hot-shoe of transmitter supports ETTL Compatible with ALL YongNuo/Canon EXII series speedlites Settings saved automatically Single-contact camera & speedlite triggering Compatibility This Canon EOS cameras offer in camera flash control with Yongnuo YN622 C: 1D Mark III, 1D Mark IV, 1Ds Mark III 5D Mark II, 5D Mark III 7D 40D, 50D, 60D 450D, 500D, 550D, 600D, 650D 1000D, 1100D The following flashes will support this wireless remote control through camera menu": Canon 600EX, 600EX-RT, 580EX II, 430EX II, 320EX, 270EX II YongNuo YN-565EX, YN468, YN468 II, YN467, YN467 II, YN465 If you use the Canon Speedlite 430EX or 580EX (not mark II) or an older camera without the Flash Control menu then you will have to make settings by hand. Older cameras that dont have the same Flash Control menu include the original 5D, 10D, 20D, 30D, 300D, 350D, 1D and 1D Mark II. Package Content 1 x YN-622C- TX Master 1 x YN-622 Transceriver 1 x User manual English and Chinese

Off-camera flash is fun – until every power change means digging through the camera menu. The Yongnuo YN-622C-TX is a radio transmitter for Canon with its own LCD screen: you control up to three flash groups right on the trigger, switch between TTL and manual power and use high-speed sync. It pairs with Yongnuo YN-622C receivers. E-TTL II, manual power and Super Sync, mixable per group 3 groups, 7 channels, 2.4 GHz radio with up to 100 m range HSS up to 1/8000 s and second-curtain sync LCD screen, runs on 2 AA batteries Your flashes under control, no menu diving Everything on the screen Power, flash exposure compensation in 1/3 stops and zoom are set per group directly on the YN-622C-TX. That saves time on set and keeps you connected with your subject instead of buried in the camera menu. Mix TTL and manual Group A in TTL, group B on manual 1/8 and group C driving a studio strobe via Super Sync: modes can be combined per group. Flash Value Lock (FVL) holds a metered TTL output. Fast shutter speeds in daylight HSS lets you shoot wide open even in bright sun. Super Sync lets studio strobes and speedlites without HSS work at shutter speeds above your camera's sync speed, with the timing adjustable manually per group. What it looks like in practice Outdoor portrait in the afternoon Two Canon speedlites on YN-622C receivers stand either side of your subject. You darken the sky at 1/2000 s with HSS, run the key light in TTL and dial in the rim light manually – all from the transmitter on your camera. What you should know before you order Transmitter only, receivers sold separately The YN-622C-TX is the on-camera transmitter only. Every off-camera flash needs a Yongnuo YN-622C receiver or a flash with the YN-622 radio system built in. It is not compatible with other radio systems such as Canon RT or Godox X. Check compatibility with newer bodies The YN-622C-TX is a proven trigger for Canon EOS DSLRs (list below). The manufacturer has not published a compatibility list for mirrorless Canon EOS R models – ask us before you buy if you shoot EOS R. User manual The included manual is in English and Chinese. We can provide a German manual on request. Technical details at a glance Manufacturer: Yongnuo Model: YN-622C-TX System: Canon E-TTL / E-TTL II Radio: 2.4 GHz, 7 channels Range: up to 100 m Groups: 3 (A, B, C), TTL / M / Super Sync mixable Power and FEC: adjustable in 1/3 stops Sync: HSS up to 1/8000 s, first and second curtain, Super Sync Other features: Flash Value Lock, per-group zoom control, AF assist light, battery indicator, auto-saved settings Ports: PC sync socket (also usable as input), USB for firmware updates Power: 2 x AA Compatible receiver: Yongnuo YN-622C Compatible Canon cameras (per manufacturer): EOS-1D Mark III, 1D Mark IV, 1Ds Mark III, 1D X, 5D Mark II, 5D Mark III, 6D, 7D, 40D, 50D, 60D, 70D, 100D, 450D, 500D, 550D, 600D, 650D, 700D, 1000D, 1100D In the box 1 x Yongnuo YN-622C-TX transmitter 1 x user manual (English/Chinese)

Yongnuo YN-622 C II E-TTL II wireless flash trigger for Canon and Yongnuo complementary Yongnuo's new radio TTL flash trigger YN-622 is available now! The new flash trigger offers automatic exposure metering TTL without the need of a line of sight between camera and flashes. Infrared bases systems like ST-E2 often suffer from being hidden inside soft boxes or behind bounders which are no problem for radio based systems. Typically radio triggers offer a maximum range of up to 100m under best circumstances.The YN-622 is much bigger than the manual trigger RF-603 and nearly the same dimensions as the Pixel King. This allows the use of widely used AA batteries and comfortable buttons.It supports TTL, manual flash mode, 3 channels and 3 groups, high speed sync (HSS) up to 1/8000s, automatic zoom, exposure compensation, AF assist beam, PC sync and a lot more features.Apparently the radio trigger offers a function called hypersync. This allows shorter sync speeds even with studio flashes or other manual flashes. The new YN-622 fits perfectly in the Yongnuo product line and will be first available for Canon DSLR, probably later for Nikon. Compatible are all flashes by Yongnuo and Canon's EX II flashes.FeaturesCompatible flash mode: E-TTL II/Manual/MultiCompatible Shutter sync: 1st curtain, 2nd curtain, High speed sync (HSS/FP) Max 1/8000sControl remote speedlites using camera's build-in flash menuPC port can output 1st/2nd/HSS signal to trigger studio flashFlash Exposure Compensation (FEC)Flash Exposure Bracketing (FEB)Flash Exposure Lock (FEL)Flash zooming (auto，manual)Modeling FlashE-TTL group ratio (ALL/A:B/A:B C)Manual/Multi Group (ALL/A:B/A:B:C)Live view triggeringFocus Assist LampHigh-speed continuous shooting triggerSpeedlites on hot-shoe of transmitter supports ETTLCompatible with ALL YongNuo/Canon EXII series speedlitesSettings saved automaticallySingle-contact camera & speedlite triggeringCompatibilityThis Canon EOS cameras offer in camera flash control with Yongnuo YN622 C:1D Mark III, 1D Mark IV, 1Ds Mark III5D Mark II, 5D Mark III7D40D, 50D, 60D450D, 500D, 550D, 600D, 650D1000D, 1100DThe following flashes will support this wireless remote control through camera menu":Canon 600EX, 600EX-RT, 580EX II, 430EX II, 320EX, 270EX IIYongNuo YN-565EX, YN468, YN468 II, YN467, YN467 II, YN465If you use the Canon Speedlite 430EX or 580EX (not mark II) or an older camera without the Flash Control menu then you will have to make settings by hand. Older cameras that dont have the same Flash Control menu include the original 5D, 10D, 20D, 30D, 300D, 350D, 1D and 1D Mark II.Package Content1 x YN-622C II Transceriver

Yongnuo YN-622C II e-TTL wireless flash trigger for Canon and Yongnuo   Quick lock design Supports USB firmware upgrade Supports "622" communication mode,"560-RX" communication mode Compatible flash mode: E-TTL (II)/ Manual/Multi Compatible Shutter sync: 1st curtain, 2nd curtain, high speed sync (HSS/FP), Max 1/8000s sync speed Control remote flash using camera's flash control menu screen (Remote Control Mode) Support E-TTL/Manual/Multi flash mode mix using (Mix Control Mode) Flash on hot-shoe of transmitter supports ETTL Support Flash Exposure Compensation (FEC) Support Flash Exposure Bracketing (FEB) Support Flash Exposure Lock (FEL) Support modeling Flash Support E-TTL group ratio (ALL/ A:B/ A:B C) Support Manual/Multi group (ALL/ A:B/ A:B:C) Support flash zooming (auto, manual) Support AF assist beam emitter(AF Lamp) Support PC port triggering strobe flashes and support 1st, 2nd curtain/HSS (Super Sync) Support LCD Live view triggering Support high-speed continuous shooting trigger Settings saved automatically Compatible with ALL YongNuo/Canon EXII series flashes Support single-contact of camera & flash triggering (max sync speed is 1/250s)

Yongnuo YN-622N i-TTL radio flash trigger kit for Nikon The new flash trigger offers automatic TTL exposure metering without the need for a line of sight between camera and flash. The range of the YN-622 can be up to 100m. The YN-622 is larger than the Yongnuo RF-603 and has almost the same dimensions as the Pixel Kings. However, this allows the use of cheap AA batteries and provides space for convenient buttons. The YN-622 supports TTL, manual flash mode, 3 channels and 3 groups, high-speed synchronisation (HSS) up to 1/8000s, automatic zoom, exposure compensation, AF auxiliary light, PC Sync and many other features. The wireless receiver offers a function called HyperSync. This enables faster sync times even with studio flashes or other manual flashes. The new YN-622 fits perfectly into the Yongnuo product line and is available for Canon and Nikon DSLRs. Compatible are all flashes from Yongnuo, Canon's EX II and Nikon i-TTL flashes. Features Compatible flash mode: i-TTL II / Manual / MultiCompatible shutter sync: 1st curtain, 2nd curtain, high-speed sync. Curtain, high-speed synchronisation (HSS / FP) Max 1/8000sControl via the with camera flash menuPC port can output 1st/2nd/HSS signal studio flash; Flash Exposure Compensation (FEC)Flash Exposure Bracketing (FEB)Flash Exposure Lock (FEL)Flash Zoom (Auto, Manual)Tool LightE-TTL Group Ratio (ALL / A: B / A: B C)Manual / Multi Group (ALL / A: B / A: B: C)Live-View controlFocus Assist lightHigh-speed continuous shooting controlSpeedlite flashes on the hot shoe of the transmitter support i-TTLCompatible with all YONGNUO / Nikon i-TTL flash unitsSettings automatically memorised Settings automatically savedSingle-contact cameraDue to Nikon's i-TTL system, it is not possible to control the YN-622N via the camera name. This is done either directly on the transceiver via certain button combinations or via a commander/master-compatible flash unit (SB-700, SB-900, SB-910, SU-800) that can be placed in the hot shoe of the transmitter. This allows you to use the radio system of the YN-622 trigger instead of the infrared signal of the master unit, thus increasing the range of the entire system. Compatible cameras: D600, D610, D700, D800, D800E D70, D70s, D80, D90D200, D300, D300sD7000D5000, D5100D3000, D3100, D3200D3, D3s, D4 Compatible flash units: Yongnuo YN-465, YN-467, YN-468 II, YN-565, YN-568Nikon SB-400, SB-600, SB-700, SB-800, SB-900, SB-910Nikon SU-800, SB-700, SB-900 and SB-910 can be used as a master unit Scope of delivery: 1 x YN-622N TX Master 1 x YN-622N Transceriver1 x instruction manual in English, Chinese and German for download The German manual for the Yongnuo YN-622N E-TTL can be found here The German manual for the Yongnuo YN-622N TX E-TTL can be found here