Photographic Solutions Orbit HEPA Blower for Sensor and Lens

When the blower no longer does the job and the spots in the sky stay put, your sensor needs a wet clean. At 33 mm, Sensor Swab Ultra Type 4 is matched exactly to Medium Format sensors, individually sealed and made of lint-free material that lifts oil and stuck-on dust in one pass. 12 individually sealed swabs for wet cleaning Medium Format sensors Width 33 mm (Type 4) Clean-room sealed, lint-free, with a textured surface and end points for cleaner corners Guaranteed safe for sensor coatings, according to the manufacturer A clean sensor in one pass The right width, no second wipe At 33 mm the swab covers the full height of a Medium Format sensor: drag one side firmly across the sensor, then come back with the clean side. The textured surface picks up the dirt instead of pushing it to the edge, and the end points reach into the corners. Clean until you use it Every swab is sealed in its own clean-room package, so you don't bring fresh dust onto the sensor, even after the box has ridden around in your bag for months. How this works in practice Before an important job Test shot against a blue sky at f/16, and the spots show. Two drops of Eclipse or Aeroclipse on the swab, one pass across the sensor, new test shot. You're ready in five minutes without sending the camera away for days. Fits your camera Type 4 is designed for Fujifilm GFX and Hasselblad X. What you should know before you order Check the width A swab that's too narrow leaves streaks, one that's too wide won't fit the sensor well. For full frame Type 3 (24 mm) is right, for APS-C Type 2 (17 mm). If in doubt, check the Photographic Solutions swab chart. Fluid sold separately, one swab per clean The swabs come dry, so you also need Eclipse or the non-flammable Aeroclipse. Each swab is single-use. On cameras with a moving sensor (IBIS), switch to cleaning mode or lock the sensor first. Technical details at a glance Type: sensor swabs for wet cleaning Type 4, width 33 mm Sensor format: Medium Format Contents: 12 swabs, individually sealed Single use, welded seams, channeled handle Scope of delivery 12 x Photographic Solutions Sensor Swab Ultra Type 4 (33 mm)

When the blower no longer does the job and the spots in the sky stay put, your sensor needs a wet clean. At 24 mm, Sensor Swab Ultra Type 3 is matched exactly to Full Frame sensors, individually sealed and made of lint-free material that lifts oil and stuck-on dust in one pass. 12 individually sealed swabs for wet cleaning Full Frame sensors Width 24 mm (Type 3) Clean-room sealed, lint-free, with a textured surface and end points for cleaner corners Guaranteed safe for sensor coatings, according to the manufacturer A clean sensor in one pass The right width, no second wipe At 24 mm the swab covers the full height of a Full Frame sensor: drag one side firmly across the sensor, then come back with the clean side. The textured surface picks up the dirt instead of pushing it to the edge, and the end points reach into the corners. Clean until you use it Every swab is sealed in its own clean-room package, so you don't bring fresh dust onto the sensor, even after the box has ridden around in your bag for months. How this works in practice Before an important job Test shot against a blue sky at f/16, and the spots show. Two drops of Eclipse or Aeroclipse on the swab, one pass across the sensor, new test shot. You're ready in five minutes without sending the camera away for days. Fits your camera Type 3 is designed for Sony A7 and A9, Canon EOS R5, R6, 5D and 6D, Nikon Z5, Z6, Z7 and D800 to D850, and Panasonic Lumix S. What you should know before you order Check the width A swab that's too narrow leaves streaks, one that's too wide won't fit the sensor well. For APS-C and Micro Four Thirds cameras Type 2 (17 mm) is right, for medium format Type 4 (33 mm). If in doubt, check the Photographic Solutions swab chart. Fluid sold separately, one swab per clean The swabs come dry, so you also need Eclipse or the non-flammable Aeroclipse. Each swab is single-use. On cameras with a moving sensor (IBIS), switch to cleaning mode or lock the sensor first. Technical details at a glance Type: sensor swabs for wet cleaning Type 3, width 24 mm Sensor format: Full Frame Contents: 12 swabs, individually sealed Single use, welded seams, channeled handle Scope of delivery 12 x Photographic Solutions Sensor Swab Ultra Type 3 (24 mm)

Fingerprints on the front element, streaks on the filter, spots on the sensor: water or glasses cleaner won't get them off without leaving new residue. Eclipse is a high-purity, methanol-based cleaning fluid that evaporates as fast as you apply it and leaves absolutely no residue. High-purity cleaning fluid for sensors, lenses and filters Evaporates instantly, no residue With Sensor Swab Ultra for CCD and CMOS sensors With PEC-PAD for lenses and filters One fluid for your whole kit Residue-free, even on coated surfaces Because Eclipse contains next to no contaminants, nothing stays on the glass once it has evaporated. That's exactly what you want on sensors and coated lenses, where any film shows up in backlight. The standard for sensor cleaning Together with Sensor Swab Ultra, Eclipse is the classic combination for wet sensor cleaning. Two or three drops on the swab are enough. How this works in practice Lens and filter before the shoot A few drops on a folded PEC-PAD, wipe lightly in one direction from the centre outwards, done. Refold the pad so you always work with a clean side. Sensor cleaning at home Blow off loose dust first, then put Eclipse on a Sensor Swab and drag it firmly across the sensor, coming back with the clean side. This handles oil spots that no blower will shift. What you should know before you order Eclipse is flammable Due to its high methanol content, Eclipse is flammable. Keep it away from open flames and heat. If you need a non-flammable option for travel, Aeroclipse offers the same cleaning power. Light pressure, little fluid The manufacturer notes that prolonged, aggressive rubbing with Eclipse can remove coatings. Work gently and never scrub one spot for long. Swabs and PEC-PADs are not included; PEC-PADs are not meant for sensors. Technical details at a glance Type: cleaning fluid for sensors and optics Base: high-purity methanol Contents: 15 ml with dropper cap Evaporates instantly, residue-free Flammable Scope of delivery 1 x Photographic Solutions Eclipse 15 ml

Dust can be blown away, oil and grease spots on the sensor can't. That's exactly what Aeroclipse is made for: a few drops on a Sensor Swab, one pass across the sensor, and the fluid evaporates quickly without residue. Unlike classic Eclipse, Aeroclipse is non-flammable, which makes it the better choice for travel and your camera bag. Cleaning fluid for CCD and CMOS sensors Same purity and cleaning power as Eclipse, but non-flammable Dries fast and leaves no streaks Also suitable for lenses and filters Clean sensors, no streaks Removes what the blower can't Stubborn particles, pollen and oil spots from the shutter stick to the sensor and show up as dark spots at f/11 and smaller. Aeroclipse loosens this contamination so the swab can pick it up instead of just smearing it around. Approved by the manufacturer for all sensors Photographic Solutions approves Aeroclipse for all common sensors and their coatings, so there's no guessing whether the fluid suits your camera. How this works in practice After a day of lens changes outdoors Landscape, wind, several lens swaps: by evening the first spots appear in the sky. With Aeroclipse and the right Sensor Swab your sensor is clean again in a few minutes, no need to send the camera in. One bottle for sensor, lens and filter A few drops on a PEC-PAD also clean front elements and filters. On the road you only need one bottle for your whole kit. What you should know before you order Swabs are not included Aeroclipse is the fluid only. For sensor cleaning you also need Sensor Swabs in the right width for your sensor size (Type 1, 2, 3 or 4). PEC-PADs are for lenses and filters only, not for the sensor. Use it sparingly Two to three drops per swab are enough. Too much fluid leads to streaks rather than a cleaner sensor. On cameras with a moving sensor (IBIS), switch to cleaning mode or lock the sensor before you start. Technical details at a glance Type: cleaning fluid for sensors and optics Contents: 15 ml with dropper cap Suitable for CCD and CMOS sensors Non-flammable, fast drying, residue-free Scope of delivery 1 x Photographic Solutions Aeroclipse 15 ml

When the blower no longer does the job and the spots in the sky stay put, your sensor needs a wet clean. At 17 mm, Sensor Swab Ultra Type 2 is matched exactly to APS-C and Micro Four Thirds sensors, individually sealed and made of lint-free material that lifts oil and stuck-on dust in one pass. 12 individually sealed swabs for wet cleaning APS-C and Micro Four Thirds sensors Width 17 mm (Type 2) Clean-room sealed, lint-free, with a textured surface and end points for cleaner corners Guaranteed safe for sensor coatings, according to the manufacturer A clean sensor in one pass The right width, no second wipe At 17 mm the swab covers the full height of a APS-C and Micro Four Thirds sensor: drag one side firmly across the sensor, then come back with the clean side. The textured surface picks up the dirt instead of pushing it to the edge, and the end points reach into the corners. Clean until you use it Every swab is sealed in its own clean-room package, so you don't bring fresh dust onto the sensor, even after the box has ridden around in your bag for months. How this works in practice Before an important job Test shot against a blue sky at f/16, and the spots show. Two drops of Eclipse or Aeroclipse on the swab, one pass across the sensor, new test shot. You're ready in five minutes without sending the camera away for days. Fits your camera Type 2 is designed for Fujifilm X series, Sony A6000 series, Canon APS-C (EOS R7, R10, R50 and EOS DSLRs), Nikon DX (D3000 to D5600), Olympus OM-D and Panasonic Lumix G. What you should know before you order Check the width A swab that's too narrow leaves streaks, one that's too wide won't fit the sensor well. For full frame you need Type 3 (24 mm), for APS-H and older pro Nikon DX bodies Type 1 (20 mm). If in doubt, check the Photographic Solutions swab chart. Fluid sold separately, one swab per clean The swabs come dry, so you also need Eclipse or the non-flammable Aeroclipse. Each swab is single-use. On cameras with a moving sensor (IBIS), switch to cleaning mode or lock the sensor first. Technical details at a glance Type: sensor swabs for wet cleaning Type 2, width 17 mm Sensor format: APS-C and Micro Four Thirds Contents: 12 swabs, individually sealed Single use, welded seams, channeled handle Scope of delivery 12 x Photographic Solutions Sensor Swab Ultra Type 2 (17 mm)

When the blower no longer does the job and the spots in the sky stay put, your sensor needs a wet clean. At 20 mm, Sensor Swab Ultra Type 1 is matched exactly to APS-H sensors, individually sealed and made of lint-free material that lifts oil and stuck-on dust in one pass. 12 individually sealed swabs for wet cleaning APS-H sensors Width 20 mm (Type 1) Clean-room sealed, lint-free, with a textured surface and end points for cleaner corners Guaranteed safe for sensor coatings, according to the manufacturer A clean sensor in one pass The right width, no second wipe At 20 mm the swab covers the full height of a APS-H sensor: drag one side firmly across the sensor, then come back with the clean side. The textured surface picks up the dirt instead of pushing it to the edge, and the end points reach into the corners. Clean until you use it Every swab is sealed in its own clean-room package, so you don't bring fresh dust onto the sensor, even after the box has ridden around in your bag for months. How this works in practice Before an important job Test shot against a blue sky at f/16, and the spots show. Two drops of Eclipse or Aeroclipse on the swab, one pass across the sensor, new test shot. You're ready in five minutes without sending the camera away for days. Fits your camera Type 1 is designed for Canon EOS-1D Mark III and Mark IV (APS-H) and older pro Nikon DX bodies such as the D2X, D200 or D300. What you should know before you order Check the width A swab that's too narrow leaves streaks, one that's too wide won't fit the sensor well. For most current APS-C cameras Type 2 (17 mm) is right, for full frame Type 3 (24 mm). If in doubt, check the Photographic Solutions swab chart. Fluid sold separately, one swab per clean The swabs come dry, so you also need Eclipse or the non-flammable Aeroclipse. Each swab is single-use. On cameras with a moving sensor (IBIS), switch to cleaning mode or lock the sensor first. Technical details at a glance Type: sensor swabs for wet cleaning Type 1, width 20 mm Sensor format: APS-H Contents: 12 swabs, individually sealed Single use, welded seams, channeled handle Scope of delivery 12 x Photographic Solutions Sensor Swab Ultra Type 1 (20 mm)